Related
How to hardware reset Touch Pro2?
RHOD100 MFG 32M SS-BC 0.74.1000
I recive answer from HTC:
The way you do a hard reset on a touch Pro 2 is :
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset
Thank you once again for your continued patronage.
Best regards, Europe customer support team HTC Corp. Global Service Division
But, this instruction not work.
Try holding the Vol Up and Down together and Reseting with the Stylus. (Just a guess BTW )
P.S. Did you get my PM ?
Thanks
Dave
DaveShaw said:
Try holding the Vol Up and Down together and Reseting with the Stylus. (Just a guess BTW )
P.S. Did you get my PM ?
Thanks
Dave
Click to expand...
Click to collapse
Not Work
Does it get to the point where it shows you a reset message on screen?
This is screen
Goran Anicic said:
This is screen
Click to expand...
Click to collapse
From what I've read about the Topaz:
Hold Vol UP and Vol DOWN together (keep them pressed down and do not release). Then press the reset button with the Stylus and hold it for a few seconds, then remove the stylus keeping vol up and down pressed.
Or if the device is off hold down Vol Up and Vol Down (keep them both pressed until you see the message) and then Power On.
A Hard Reset is usually a two button combo whilst the device is powering on (either from a reset or from a cold boot).
Dave
That screen reads like the software is dead due to it being a beta test.
Jacina said:
That screen reads like the software is dead due to it being a beta test.
Click to expand...
Click to collapse
Yep, but you can still Hard Reset and change the date.
Ta
Dave
I have the same problem. Can anybody PM me with a solution to this? Tried all I know and nothing works...
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
And what am I supposed to do with my other four arms whilst I'm doing that?
rb14 said:
And what am I supposed to do with my other four arms whilst I'm doing that?
Click to expand...
Click to collapse
LMAO now that just made my morning..( idont have a pro2 just skimming through threads lol but u made my day )
daeshawn said:
LMAO now that just made my morning..( idont have a pro2 just skimming through threads lol but u made my day )
Click to expand...
Click to collapse
Haha, me 2.
Think he meant to say, turn the phone off, hold start call and end call keys and then press power on while holding down the two buttons. Nothing needed with the reset button.
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
yes this is accurate and just so you guys know, this is in the manual lol.
mallman said:
yes this is accurate and just so you guys know, this is in the manual lol.
Click to expand...
Click to collapse
There is this saying amongst IT guys... RTFM = Read the ****ing Manual
hehe mostly the answer is closer than u think
Wrong post.
DELETE
mallman said:
yes this is accurate and just so you guys know, this is in the manual lol.
Click to expand...
Click to collapse
Manual? Think I threw mine away when I got it Never read the manual
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
Thanks! That did it! Team effort though!
What is this, some pre-release touch pro 2?
Hey lads,
this is probably a very dumb Q, but since I am new to all this android schmuzzle and couldn't find ballocks on that, don't judge me too hard ;]
I've noticed that when u press both VolUp and VolDown ( put pressure kinda in the middle or the rocker ) the phone vibrates once and then after several seconds (seems to vary) it vibrates three times fast. Now what the flick is that? Not that much of a big deal but it gets annoying given that even when the screen is off and the phone is locked doesn't seem to give a damn
thanks
has happened to me too but hard to reproduce. I have no ideas why it happens. Sometimes it occurs when the phone is booting up for me as well.
Put ur finger in the middle of the rocker and press ( not even hard ). It happens every time in my case. even when the phone is locked
I get the same behaviour, sure is strange.
Kinda old thread but I didn't want to start a new one either. I've noticed this too by accident. When you turn off your screen and press both volume buttons at the same time it vibrates once and every other time twice or thrice. If it vibrates only once it will vibrate again a couple of times after about 10 seconds. Has someone found a reason to this already?
Hawks556 said:
Has someone found a reason to this already?
Click to expand...
Click to collapse
Maybe HTC thought "Why not? Let's do this and see how they discuss about it." ^^
Sent from my Desire HD
These buttons are part of combimation of three finger salute (at least look like that)...if you press voulme up + Down and power button, phone will reboot....so might be vibration is just an indicator to show go ahead and press the power button for restart.......Just a Guess
Pressing Volume Up + Down simultaneously while having USB Debugging turned on creates a bug report in the bugreports folder on your SD card.
G1sanju said:
These buttons are part of combimation of three finger salute (at least look like that)...if you press voulme up + Down and power button, phone will reboot....so might be vibration is just an indicator to show go ahead and press the power button for restart.......Just a Guess
Click to expand...
Click to collapse
I can't get it to reboot by pressing the 3 buttons.
olivierlee said:
Pressing Volume Up + Down simultaneously while having USB Debugging turned on creates a bug report in the bugreports folder on your SD card.
Click to expand...
Click to collapse
This is correct, there's always a new bugreport after I press the volume buttons. I don't think that it's even necessary to have usb debugging on.
Thanks for the quick answers, but could there be something more to it?
Hawks556 said:
I can't get it to reboot by pressing the 3 buttons.
Click to expand...
Click to collapse
Press the power button first and then press volume up and down..you will get a reboot...
Nope, can't get it to reboot. Perhaps this is rom related?
Hawks556 said:
Nope, can't get it to reboot. Perhaps this is rom related?
Click to expand...
Click to collapse
It shouldn't be, but its really hard to get it if you are trying to press three button, you can try power button and middle vol button......any ways I also tried lot of times before I got my first reboot....
1) Pressing both VOL UP & VOL DOWN at the same time = Vibrations & all processes' states and stacktraces dumped to /data/arn/traces.txt (thanks to alind_)
2) Pressing both VOL UP & VOL DOWN at the same time + POWER BUTTON once = instant reboot
Works for me with CM7 and Stock Sense.
Is there anyway to take a screen shot without loading any other apps.
(I'd try power btn + vol down but seems like it doesn't work.)
Power Button and Vol. Down
works for me
try again, begin with power button first
Mesho Arc said:
Power Button and Vol. Down
works for me
try again, begin with power button first
Click to expand...
Click to collapse
Thank you very much, but when i press(hold) the power btn, then the menu pop up and when I press more on the volume down, the sound level still opened!
Is there any response or any notice when the screen was taken?
You have to press and hold both buttons at the same time.
Power + vol down
It makes cam noise ,gives preview and notification in notification bar
Good luck
Sent from my LT15i using xda premium
Power+Vol down not working for me.. :|
soumya_digi said:
Power+Vol down not working for me.. :|
Click to expand...
Click to collapse
It is tricky!! keep trying and im sure you will get the hang of it.
its working well,hold it at the same time,wait about 2 o 3 second..
I can confirm that's working without a problem.Currently using the beta with root,bt and wi-fi fix.Just keep tryin.It's working
Thank you very much, I'll try my best (but for me, still doesn't work)
screen capture shortcut
try screen capture shortcut from market ..... works great. ... lots of feature and option and its free
good luck
Thanks everybody, finally, it's working now
works as well for my ICE Lite Beta ROM..thanks everyone for the tricks
is really need to push both at the same time try few times b4 i get it how to use a bit hard
Power Button + Vol Down
App2Sd not working
App2sd is not wokring ... tried extending internal memory with some thread i found..but it is also not working
rashid.fairus said:
its working well,hold it at the same time,wait about 2 o 3 second..
Click to expand...
Click to collapse
Hi is right!
Hold and wait!
To restart your Samsung galaxy y without switching it off and again switching it on , press and hold "home key + volume up key+ lock button " until it appears Samsung galaxy y
naveenkumarph said:
To restart your Samsung galaxy y without switching it off and again switching it on , press and hold "home key + volume up key+ lock button " until it appears Samsung galaxy y
Click to expand...
Click to collapse
It is probably turning off as ua pressing the lock button.. which is also the power ON/OFF button..
?LOL?
you'll need to press and hold the power button. no other key required. you can also do it with some 'style' with 14 lidroid toogles or adb command.
PS: press and hold power button will give you a hard reset. this method might make your sdcard corrupted. I don't recommend this method for anyone.
Don't you just have to press and hold the POWER button for 10 seconds to reset the phone? No other buttons are needed.
Press 'Thanks' if I helped!
Sent from my GT-S5360 using XDA Premium
ROFLkopter said:
Don't you just have to press and hold the POWER button for 10 seconds to reset the phone? No other buttons are needed.
Press 'Thanks' if I helped!
Sent from my GT-S5360 using XDA Premium
Click to expand...
Click to collapse
Or why take the trouble? :victory:
Switch it off using the power button. Switch it back on when it vibrates to confirm shutdown.
naveenkumarph said:
To restart your Samsung galaxy y without switching it off and again switching it on , press and hold "home key + volume up key+ lock button " until it appears Samsung galaxy y
Click to expand...
Click to collapse
Want to instant power off.??...just remove phone batterylol
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:
I think Kuro's suggestion was the best one, cause saying lol and ripping storage is not good for your devices future.
Send from my GT-S5360 (Nemesis Hybrid KuroKernel BRAVIA™ xLoud™ Dolby Mobile™ Beats™ CyberShot™ 1GB Internal 1GB)
My power button has stopped working and thus I cannot switch my phone on!
Can anybody please help? Is there any other method of switching on the phone bypassing the power button? :crying:
rakeshsubho said:
My power button has stopped working and thus I cannot switch my phone on!
Can anybody please help? Is there any other method of switching on the phone bypassing the power button? :crying:
Click to expand...
Click to collapse
Open rear case carefully and see if you can turn it on
Hello,
I am facing the same issue..the power button isnt working.
Hence i cannot restart/unlock /power off my phone.
Is there any alternative?
Please help ASAP.
Thanks!
Press volume buttons and plug in the charger. Phone will start in recovery mode. Select normal and your phone will start.
Once your phone is running, download power to volume button app to unlock the phone using volume button.
rfreek said:
Press volume buttons and plug in the charger. Phone will start in recovery mode. Select normal and your phone will start.
Once your phone is running, download power to volume button app to unlock the phone using volume button.
Click to expand...
Click to collapse
Should I press both the power buttons? how long should it be pressed.
I tried holding both the up and down volume simultaneously and inserted the charger, I get only blue battery icon and after the screen blacks off. Pls help.
That really works.....huff
rfreek said:
Press volume buttons and plug in the charger. Phone will start in recovery mode. Select normal and your phone will start.
Once your phone is running, download power to volume button app to unlock the phone using volume button.
Click to expand...
Click to collapse
This is a new trick for me.....! Saved my energy!!! Thanks a lot
thank you it worked
rfreek said:
Press volume buttons and plug in the charger. Phone will start in recovery mode. Select normal and your phone will start.
Once your phone is running, download power to volume button app to unlock the phone using volume button.
Click to expand...
Click to collapse
hi thankyou for the help it worked.
first we have to press volume button then connect charger. it will ask for boot option.
volume up button means scroll and volume down button means select, by following the procedure I started my mobile.
just tell me how to set volume button as screen off and power off. thanks in advance
how long should i press volume buttons.... and which volume button up or down ? plz tell me i am facing this problem ..my power button is ruptured and i cant switch on my phone for last 20 days ..plz help me my phone is micromax canvas 2.2
rakeshsubho said:
My power button has stopped working and thus I cannot switch my phone on!
Can anybody please help? Is there any other method of switching on the phone bypassing the power button? :crying:
Click to expand...
Click to collapse
i faced this problem 2 times, once under warrant and 2nd out-of .... just replace the power button.
Max 100 RS from out side market shop but this time i purchased the power buttons and i will replace at my own.
hello. my phone's power button is working. but the canvas 4 logo is displayed and its stuck on screen. plz help
i also faced same pbm, but now its working
rakeshsubho said:
My power button has stopped working and thus I cannot switch my phone on!
Can anybody please help? Is there any other method of switching on the phone bypassing the power button? :crying:
Click to expand...
Click to collapse
if u r using u r original rom den ....... conect ur phone to lap den remove battey, 1-2 minns den u r phone stared blinking ben just place the battery in phone. automatically ur phone switch onss..........
.......enjoy.... dont try it..... incase if u installed any another rom.... it dosent work...or u may lose u r phone....
lock button of micromax canvas spark 3 is destroyed ..
how to switch on the phone ............