Related
I have been on Ginger Villain 1.1, 1.2, 1.3 and 1.4 and i have had this problem.
When the wifi is connected, i would say once every five minutes it disconects and re-connects again. Even though this process takes a few seconds, it is very annoying when im on skype as it terminates the call.
I have set the wifi sleep policy to never. I have never had this problem on stock, modaco, and Robo HD roms.
One thing to note, i originally thought this was a gingerbread 2.3 problem. Too see if was true, i flashed the new modaco 2.3 rom and it was fine. I was using skype and other apps for over an hour and it did not disconnect.
So why is this happening in ginger villain?
One thing to note.
I live in a flat and therefore the wifi signal has always been quite low BUT it has always connected without any problems.
Could it be that GV 2.3 decreases wifi signal strength?
I have flashed the latest radio and ril which seems to have fixed it.
But now I am getting graphical issues as the screen is flashing and acting very weird on certain apps.
Anyone got any ideas?
I'm currently on 1.3 GV and have the same issue with the Wifi, about to try a different Kernel to see if it helps.
I've also noticed a decreased signal, I can be standing right next to my router and not receiving absolute full signal... Think it may be a ROM issue?
You have to remember these ROMs ain't perfect and each one seems to have it's flaws, but the dev's are getting there!
What kernel will you try?
Strange. I have no problem with wi-fi. Signal as well as on the stock rom. In the router logs no disconnects.
Kernel: 1.6 HAVS 1113Mhz + BFS from Villain setup
Radio: 32.44.00.32H_5.09.05.30_2
It is very strange, I have tried different radio's but still can't fix it.
Under normal internet use, it is quite difficult to tell that the connection has dis connected and reconnected as it only takes a few.seconds.
When using Skype or Google talk, you can tell and its very annoying.
n1blo said:
I'm currently on 1.3 GV and have the same issue with the Wifi, about to try a different Kernel to see if it helps.
I've also noticed a decreased signal, I can be standing right next to my router and not receiving absolute full signal... Think it may be a ROM issue?
You have to remember these ROMs ain't perfect and each one seems to have it's flaws, but the dev's are getting there!
Click to expand...
Click to collapse
Did you manage to fix this with a different kernel?
I am so glad I have finally found someone with the same issue as me! I have a relatively weak wifi signal (distance) from my hub to my room where I use my desire. On apps like youtube or bbc iplayer, it would suddenly turn off wifi and then reconnect all of a sudden. It meant watching anything with these apps is a nightmare. And I have always had it set to wifi sleep - never. I have never had this problem with any other ROM and I have tried loads. I originally put it down to my already tempermental internet, but I have now ruled this out. This is specifically a GV ROM issue.
GV 1.0 - 1.4 all had the same issue. Then, yesterday much to my surprise I saw in the 1.5 change log that one of the changes was that 1.5 "should fix the wifi sleep bug".
Last night, I tried iPlayer as usual, but I believe the problem still persists. I now don't know what to do. I will try resetting the wifi hub to defaults and so on, but I really don't think it will make a difference. I could try flashing a new kernal, but again I don't see how it would make a difference. Then I thought maybe a new radio, but I don't see the need. I'm using the latest official desire radio, and it works flawlessly on everything else.
So, I'm out of ideas, and my patience is slowly dying. I love the ROM for all its worth. It works perfectly, except for this. But for me, stable wifi is a deal breaker. I might need to try something else like amethyst.
Yes, sounds exactly like my problem. There Is a problem with Ginger villain as it works fine on other Roms.
I have tried so many different kernel's, radios and ril's but to no luck.
The only last solution I can think of other than to change rom is to try the modaco kernel. But the problem with that is, its not available seperately so we need someone to extract it from the rom.
I've got a strange issue with my HTC Desire and GV 2.5 :
at home, it doesn't even detect my Wifi (others devices do, of course), while at work it works perfectly.
The security is the same (WPA2/AES) between work and home, so I don't see any explanation... do you think it can be caused by the channel used ?
Frederic
there have been pletny of GPS threads, obviously. but im wondering what you guys did to fix yout GPS on cm7? my gps worked in the past, but recently when i flashed RC4, the GPS stopped working. and i flashed the latest nightly and it is not working as well. i just baffles me because it worked in earlier builds, and you would figure it would work in more stable builds.
so.
what have you guys done to fix your GPS/what nightly are you on?
As an avid Foursquare user I use GPS every day, several times a day, these GPS issues are the main reason I'm still on the stock ROM.
i know what you mean. my GPS works on sense based roms, which is great. im not sure whyyyy its not working on CM7.
PatrickHuey said:
there have been pletny of GPS threads, obviously. but im wondering what you guys did to fix yout GPS on cm7? my gps worked in the past, but recently when i flashed RC4, the GPS stopped working. and i flashed the latest nightly and it is not working as well. i just baffles me because it worked in earlier builds, and you would figure it would work in more stable builds. so. what have you guys done to fix your GPS/what nightly are you on?
Click to expand...
Click to collapse
First things first: No indicator on notification bar when starting GPS traffic assist application?
Then you are living under a rock or having bad reception. Go outside. Using some kind of widget which uses GPS also and has a on/off switch in it? Try switching off and reboot. It simply should work with the latest nightlies. Try reflashing and fix permissions. Do not wipe your entire phone before flashing.
Doesn't work for me either with RC 2 or RC 4. I've tried some of the fixes out but no joy. I know how to use it and it works fine when I go back to stock. Issue is definitely with my CM 7 install. I'm hoping for a solution soon as this my only issue, but it's a big one for me.
Sent from my HTC Vision using XDA App
GPS works for me (screen shot included)
I don't use the navigation much but if I understand the program gpsstatus, it is working for me. I have used CM7 RC2 and RC4 (which is what I am on).
-brad
bradley_e_smith said:
I don't use the navigation much but if I understand the program gpsstatus, it is working for me. I have used CM7 RC2 and RC4 (which is what I am on).
-brad
Click to expand...
Click to collapse
That's right, yours is working fine. If the GPS is "broken", you won't have any activity on GPS Status. No green dots for the satellites on the round display, and no bars on the bar graph below that. Those will be blank, and you never get lat/long coordinates
It's still working for me on RC4, but locking takes about a minute, whereas it was almost instant on stock.
CM7 definitely does something to gps, very weird how everyone is getting different results.
Sent from my T-Mobile G2
had problems with gps locking on stock radio with cm 6.1.1 after flashing .27 i get almost instant lock in the house, that did not happen with stock rom or radio.
but my wifes with stock radio and rom did that from the box
both g2
GPS doesn't work at all for me in CM7-RC4 (I mean nothing, no signals or indicators or anything). Works fine in CM6.
I believe I'm currently running the "stock" T-mo OTA radio 12.28b.60.140eU_26.03.02.26_M and haven't tried a different one. Think changing that might help? I don't understand why some people have it working with this radio but not others.
Edit:
OK, I got it working. I had first installed CM7-RC4 using clockwork recovery (in the boot menu) after wiping out the stock ROM. GPS didn't work so I installed CM6 using ROM manager. GPS worked. I then installed CM7-RC4 using ROM manager and voilà, GPS works in CM7-RC4 now. I have no idea what the difference is.
Try .27 worked for me on cm 611 , just flashed the new one, works great, satellites get higher value on GPS test
Sent from my HTC G2 using Tapatalk
Sorry, didn't see your post after mine. I edited mine to show that I got it working simply by downgrading to CM6 then upgrading to CM7. Could be a ROM Manager thing or maybe something left over from how CM6 configured the hardware, or who knows.
I do wish CM7 was more stable though, seems kind of wonky.
I had the same problem with CM7. Download gps.vision.so from either nightly #4 or nightly #34. Open up adb:
adb remount
adb push gps.vision.so /system/lib/hw
adb reboot
GPS should work after that.
Radio .26, CM7 RC4, flashed also the "auto-patcher" that patches files to your ROM based on what radio you have.
I don't often use bluetooth but I don't ever recall having interference issues with WIFI until I got to CM7 and flashed the latest radio.
It's WIFI thats causing the issue, if I turn wifi off while I'm on a call the noise is gone.
Is my headset on the fritz, am I loosing my mind, or is this new with this radio version? Or all of the above.
Sidenote: Anyone know of an app that will automatically disable wifi while I'm on a BT call?
MT3GS, CM 7.0.2, Radio 7.9.35.10
hello good sir ok here it goes your running cm7 stable i see with the latest raido and that is great the problem is not with your phone more than likely could be but are you one of the unfortanate folks that has wifi connectivity issue ??? or does wifi work great for you as it does for me never had issues. the reason i ask is cm7 running the latest radio and latest everything lol is flawless however there is a licencing issue from google with android 2.3 cyanogenmod 7 with the wifi apk file meaning cm mod is using the wifi apk from 2.2 because there is no licence restrictions but for whatever reason on 2.3 they have that wifi apk file under licence for a one year period so that being said that may be the issue. or it could be your phone i have 3 mytouch slides mine wifes daughters and they all running cm7 stable clockworkmod and s-off and i have no issues with any i hope this helps and not just rambling good luck if need any additional info lmk thanks
No, that does make sense..
My wifi is a little whacky, but not nearly as bad as some folks describe. I've actually considered going back to CM6 a few times now.
My fiance has a MT3GS with CM6.11 and the older radio, I need to test my headset with that later.
I have been having this problem for about the last 3 days where I lose the downstream from my wifi after the screen turns off. The wifi is still connected and blue, and within the wifi bars there are the two grey arrows for up and down. The up arrow still flashes meaning the wifi upload is still connected, but the download arrow no longer shows. I'm able to regain the wifi downstream by toggling wifi off and then back on. As long as I don't let my phone go into sleep then I maintain wifi connectivity, but as soon as it goes into sleep I will have to toggle wfi to regain full connection again.
I'm running AOKP JB build 1 with franco kernel nightly 283. I haven't made any recent changes to my router or wifi settings. It seems to have just started happening in the last 2-3 days. My first guess is that there were some wifi issues with recent Google wifi drivers that were included in the franco kernel. Apparently the more recent nightlies reverted the wifi drivers to avoid the problems, but maybe I still have the old drivers despite running a more recent build? Like the got stuck or something on the drivers with problems. I only suggest this because I was reading around in other threads were someone mentioned if you flashed a kernel with new drivers and then another kernel with the old drivers, the only way to actually revert the drivers is to wipe and flash a fresh ROM.
However, if anyone is aware of any other possible solutions then I'm open to suggestions. Oh yeah, before it's mentioned I also have wifi set to always on, and the router is running WPA2 (AES) and the phone has a static IP. I realize this is most likely a kernel problem since that's really all that's changed in the last few days (flashing new nightlies) but I'm unable to post in the development threads and reading through his thread, no one else seems to be having this problem
If you think it could be kernel related, why not flash a stable Franco release?
You could also just upgrade to aokp build 4 then see if wifi is properly, then flash the kernel, there might be your answer.
Sent from my Galaxy Nexus using Tapatalk 2
Fire n mage said:
If you think it could be kernel related, why not flash a stable Franco release?
You could also just upgrade to aokp build 4 then see if wifi is properly, then flash the kernel, there might be your answer.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I've tried reverting to an older nightly, or even to the stable Milestone 5 but with no affect. That's why I'm wondering if it's possible once the updated wifi drivers are flashed, even flashing a different Kernel with the older drivers won't overwrite the drivers since they aren't the most up-to-date.
As far as flashing the newest build of AOKP, I was planning on doing that this weekend to see if it helps. But until then I was hoping someone here may have some answers, because even flashing a new ROM doesn't guarantee a fix.
I'm using nightly 282 of the French Revolution HD 6.1.0 +, and have not had this problem. I was having this problem one day that, with the CM10 Nightly. But I decided as follows:
Settings / Wifi / Advanced / Keep Wifi during inactivity.
Test to see ae of the right.
Settings > WiFi > Menu(the 3 dots) > Advance > Keep WiFi on during sleep > profit
Franco setting
I think your problem is releated to Wifi Driver, of couse wifi driver goes to battery safe mode when you screenoff
It's not releated to your router, for simple reason this is phone problem
It's can be ( mach do it first ) settings, upto android 4x series wifi have wifi autodisconnect on screenoff ( using data instead or nothing ), theorically data cause less battery drain than wifi, this is the sense of this value, and it's to prefer instead juice defender or another non-system app.
You can always disable wifi_pm on franco using
Code:
echo 0 > /sys/module/bcmdhd/parameters/wifi_pm
This dont allow to wifi driver screenoff modes ( less wireless performance -> less battery usage ) but increase battery drain from wireless on screenoff
I am a Big supporter of the CM Team and how they were able to give New Life to my old Epic 4G. Great job!
The problem I am having started when I moved from using CM9 to CM10 After doing a Factory Reset "clean" install... I primary use my Epic 4G as a Wifi Hotspot for my Xoom WIFI tablet which is using Team EOS3 Nightly ROMs. Now I never had ANY WiFi (speed) related problems using the CM9 version as long as I had a good signal. When I upgraded to CM10 I was able to enable the WiFi HotSpot but web browsing was extremely slow and had timeout issues to the point where it is completely frustrating and unusable. The issues due not seem to be depended on the phone's signal strength and I have not been able to resolve the problem. Has anyone experienced a similar issue?
Thank you in advance,
I have something similar. It seem to have began after the 11/19 nightly for me. The range of my connection seem to have decreased. Or if it is connected with -70 and below on Wifi Analyzer, it may get not data or very slow speeds, and timeout issues.
I have not seen any kernel changes from bbelos, so maybe it is something else in the CM nightly changes?
I am currently on 11/29 nightly, stock kernel.
CM 10 and Modem Problems
sneezy316 said:
I have something similar. It seem to have began after the 11/19 nightly for me. The range of my connection seem to have decreased. Or if it is connected with -70 and below on Wifi Analyzer, it may get not data or very slow speeds, and timeout issues.
I have not seen any kernel changes from bbelos, so maybe it is something else in the CM nightly changes?
I am currently on 11/29 nightly, stock kernel.
Click to expand...
Click to collapse
I am on the nightly from 12/3, and I can't get the wifi tether to work regardless of what I try (have set it up with open, WPA2, used Auto and Device specific for Epic 4G) - nothing seems to get it to work.
Is there another modem or anything else I should try? I tried to post on the CM10 forum, but as I'm new, I'm not allowed to.
Rob
robrichtx said:
I am on the nightly from 12/3, and I can't get the wifi tether to work regardless of what I try (have set it up with open, WPA2, used Auto and Device specific for Epic 4G) - nothing seems to get it to work.
Is there another modem or anything else I should try? I tried to post on the CM10 forum, but as I'm new, I'm not allowed to.
Rob
Click to expand...
Click to collapse
Don't use an app, there is an option in settings>more>Tethering & portable hotspot
I can't even get it to work with the built in option. It acts like there is no internet.