I've just flashed the DooMKerneL to use with Arconium ICS v3 (I have the 0% battery issue and it worked just fine) but when the phone reboot, it stuck at bootloop, it does not show the XPERIA logo, it gets back to Sony Ericsson logo and the boot loop starts... can anyone here help me?
jhnjrdan said:
I've just flashed the DooMKerneL to use with Arconium ICS v3 (I have the 0% battery issue and it worked just fine) but when the phone reboot, it stuck at bootloop, it does not show the XPERIA logo, it gets back to Sony Ericsson logo and the boot loop starts... can anyone here help me?
Click to expand...
Click to collapse
flash the stock ICS kernel first, then load up arconium. once you got it up and running, go to developer options and check force GPU rendering and turn off animations. then you can fastboot doom's ICS kernel. flash it. let the room boot up - check you have the kernel - then go back to recovery and flash the WIFI modules.
then you should be fine. i have both doomkernel ICS and arconium and i have not issues, good battery life, pretty fast and only a few graphic gitches
This ROM is laggy for me, not sure why is that.
rfec said:
This ROM is laggy for me, not sure why is that.
Click to expand...
Click to collapse
Same Trying Xperia mod now.
Doom's ICS kernel is slow. Try Ics stock kernel
Related
Hello, I did quite a few searches on google and i never found anything similiar to my issue i am having. As the guide says on cm7.. i flashed SEMC 4.0.2.A.0.42 rom with flashtool, no errors or anything. However when i flash CM7.2.0 - FXP105 Kernel the one included in the zip with fastboot... It boots up and i spam the volume button and it brings up the kernel menu, however this is when issues occures for me. It freezes maybe after 20 seconds - 120 seconds, so i am not able to even flash the actual cm7 rom because of the kernel instantly freezing, and sometimes the menu cm7 kernel shows up glitchy just with a few texts. Then i tried to connect my charger to the phone, and now the kernel is glitch free everything works perfect, but as soon as i disconnect the charger the issues comes back
Kernel with update-cm-7.1.0.1 works perfectly but new ones does not? I tried the doomkernel aswell for cm7, and still same issue.
This is how i did it
1. Flashed SEMC 4.0.2.A.0.42 rom with flashtool
2. Flashed CM7 Kernel (the one included in the cm7 zip - fastboot flash boot boot.img)
And i can't go any further than this because the kernel glitches out.
I had a similar problem, try flashing .42 then boot, log in to your Google account and wifi etc., then flash cm7 kernel & rom.
sinkster©
sinkster said:
I had a similar problem, try flashing .42 then boot, log in to your Google account and wifi etc., then flash cm7 kernel & rom.
sinkster©
Click to expand...
Click to collapse
Thanks! It did not solve the problem. Any other suggestions?
Flash with DoomLord Kernel v7 or v4, it actually should runs with all roms.
p47r0n said:
Hello, I did quite a few searches on google and i never found anything similiar to my issue i am having. As the guide says on cm7.. i flashed SEMC 4.0.2.A.0.42 rom with flashtool, no errors or anything. However when i flash CM7.2.0 - FXP105 Kernel the one included in the zip with fastboot... It boots up and i spam the volume button and it brings up the kernel menu, however this is when issues occures for me. It freezes maybe after 20 seconds - 120 seconds, so i am not able to even flash the actual cm7 rom because of the kernel instantly freezing, and sometimes the menu cm7 kernel shows up glitchy just with a few texts. Then i tried to connect my charger to the phone, and now the kernel is glitch free everything works perfect, but as soon as i disconnect the charger the issues comes back
Kernel with update-cm-7.1.0.1 works perfectly but new ones does not? I tried the doomkernel aswell for cm7, and still same issue.
This is how i did it
1. Flashed SEMC 4.0.2.A.0.42 rom with flashtool
2. Flashed CM7 Kernel (the one included in the cm7 zip - fastboot flash boot boot.img)
And i can't go any further than this because the kernel glitches out.
Click to expand...
Click to collapse
did u see fxp logo on bootscreen?
sometimes i had to flashed fxp kernel twice to get it works.
try to flash fresh .42 ftf again..
try to flashing fxp kernel again..
until u have fxp logo on bootscreen..
goodluck mate.
Try This!!
Read my post for solution :
http://forum.xda-developers.com/showpost.php?p=24978172&postcount=752
Use DooMKernel.
You can't change voltage with stock kernel.
but you must have connected to power source every entering to recovery mode.
Enjoy CM7/CM9 based ROM
Hi everyone!
I tried to install racing bean 3.0 and, after the kernel screen, it appears the "X" logo. It get stuck on this screen with the "X"!
How can i solve this problem? I don't want to lose my arc s again...:crying:
Thanks for the help :fingers-crossed:
Contact dev. Of ROM
Sent from my mighty Xperia Arc S
flash the v2.2
then flash v3.0 without a wipe then will start our phone
even me got the same issue and i cant find v2,0
but i found v3.0.1 and may give it a try and see what happens
Flashed stock kernel
Now i have flashed the ICS stock kernel and i am unable to get my phone to CWM recovery. After the sony logo appears, there's a black screen.
My PC find the phone, but it's in MTP mode, therefore i can't flash anything except the kernel (.ftf).
Do i have to change the internal memory?
DrMorph said:
Now i have flashed the ICS stock kernel and i am unable to get my phone to CWM recovery.
Click to expand...
Click to collapse
You won't be able to until you flash a kernel with CWM or use X-Parts. Click the first link in my sig and read it from start to finish, when you have a better understanding of what you're doing then try and flash something.
DrMorph said:
Now i have flashed the ICS stock kernel and i am unable to get my phone to CWM recovery. After the sony logo appears, there's a black screen.
My PC find the phone, but it's in MTP mode, therefore i can't flash anything except the kernel (.ftf).
Do i have to change the internal memory?
Click to expand...
Click to collapse
You shouldn't flash an ICS kernel, but a jb kernel
http://www.mediafire.com/?4765e8vuuo8qv#303na39mj3lcr
schlager P. said:
You shouldn't flash an ICS kernel, but a jb kernel
http://www.mediafire.com/?4765e8vuuo8qv#303na39mj3lcr
Click to expand...
Click to collapse
I solved this problem time ago. When i posted this thread i was a beginner with roms and stuff, but now i've learned alot and i'm creating my own rom right now
Thanks anyway for the answers
I like the domkernel v14 most stable kernel for xperia play i just didnt like the boot logo so i extracted the kernel and replaced the boot logo with a nice playstation logo now it wont open the clockwork recovery it just boot up what can cause the problem any help !!
nakuk21 said:
I like the domkernel v14 most stable kernel for xperia play i just didnt like the boot logo so i extracted the kernel and replaced the boot logo with a nice playstation logo now it wont open the clockwork recovery it just boot up what can cause the problem any help !!
Click to expand...
Click to collapse
just an opinion Doomlord had worked very hard in his kernel and i really think he deserves to have some credit on it so having is logo during boot and not changing it would really be a small token of thanks, but with regards to your problem what you can do is start from scratch flash original ftf. flash doomkernel v14 again and restore your nandroid back up.
Guys what should i do if my r800i got stock in TWRP recovery of "LuPuS-PLAY-jbv8-720"? Please help. :crying:
You mean stuck? Is this on the main screen on TWRP or was you trying to do something?
Does CWM work (Press vol - instead of vol + on boot)?
If it's stuck in TWRP recovery just take out the battery
Also you should use CWM if you're having problems with TWRP, hold down the other volume button on boot to access it
Yes sir i mean it stuck when after i flash turbo v1.3 and LupusJBV8 i got stock..
chrisean26 said:
Yes sir i mean it stuck when after i flash turbo v1.3 and LupusJBV8 i got stock..
Click to expand...
Click to collapse
me too i got stock LUPUS twrp recovery what will i do next pls someone help
Bravo, RTFM, guys! Turbo and Lupus use custom partition layouts, but rheyre different. To move from stock or turbo to lupus or vice versa make CWM backup, flash new kernel, restore backup.
bootloop Xperia Arc S LuPuS anzu Stock-gB+iCsv16-full and xperia ultimate hd 4.0.
Hi, I have a similar problem with LuPuS anzu Stock-gB+iCsv16-full and xperia ultimate hd 4.0.
Xperia Arc S - Unlock Bootloader -
I installed kernel and the Flashed the ROM and then it went to bootloop i can access to the CWM but it just show the screen whit the logo and nothing else, no options, nothing. also i can't get into the flashboot when i try to flash a new kernel or ROM with flashtools it doesn't recognize the device because when i insert the cable the bootloop starts automatically and as i said flashtools and windows don't recognize the device i'm a little worried because most of the unbrick tutorials rely on getting into flash boot mode
hope you can help me
I was running Gin2JellyBean 2.3 or so and was trying to switch ROM to any JellyBean ROM so I tried Jelly Z. Upon flashing Lupus for JB v8, the only time the kernel logo appears is right after fastbooting it. Every time after that, it never appears again, never giving me a chance to press the VOL DOWN and enter CWM or TWRP. It goes straight to the stock Sony Ericsson logo. Any ideas?
calar714 said:
I was running Gin2JellyBean 2.3 or so and was trying to switch ROM to any JellyBean ROM so I tried Jelly Z. Upon flashing Lupus for JB v8, the only time the kernel logo appears is right after fastbooting it. Every time after that, it never appears again, never giving me a chance to press the VOL DOWN and enter CWM or TWRP. It goes straight to the stock Sony Ericsson logo. Any ideas?
Click to expand...
Click to collapse
Did you flash cm10 kernel before installing jelly z? If you didnt do it you have what they call now bootloop. Your going have to start fresh again by flashing stock firmware via flashtool.