Every time I go onto a new rom, after exactly 3 days, I lose my mobile data and get an error 67: the sprint username/password registration is not correct. Can anyone offer any insight as to why this is happening and how I could fix it?
Usually this is an easy fix, it's a mismatch between your username and password on the phone and the username and password sprint has on file, first update your profile and prl under about phone/ system updates, if that doesn't work then call sprint and tell them to reset your username and password for your phone and you should be good.
Related
I have a verizon 6900 that I updated using NFSFAN's WM6.5 1.00 FINAL ROM and now I cannot get the internet to work. I went back to the factory 6.1 and was unable to even make calls, so I spoke with verizon and got the phone working but they were unable to get the internet working. I flashed the ROM with the WM6.5 1.00 again and ran a couple different provisions and I still cannot get the internet. Can someone please help.
Sorry it keeps asking for username and password.
internet
VZW can tell you the user name and password its something simple like vzw3g or something. If you have that setup correctly you may be in the same boat im in. I can not connect to the internet. I did a hard reset some time back and lost the ability to data connect. I contacted the vzw techies who could not solve the problem, went into the store who could not solve the problem, went back to the "techs" on the phone who could not solve the problem. They all said it was my software which I think is bs. The problem is not my software because my phone tries to connect to their network and I have no known software issues. It has to be on the network end where the network wont recognize my phone. I quit working on the problem because I dont use data right now anyways and was on a pay as you go data plan so it was vzw's financial loss that i can not use data.
This fixed my Verizon Phone
1) dial ##778, enter in 000000 for the password
2) copy the ESN(Hex) Exactly how it is(you need the caps)
3) click View Info in the lower left corner and click M.IP Settings
4) Change MIP_MODE to Simple IP Only
5) Click View Info again and goto Security
6a) HDR AN AUTH User Id = [email protected] (fill the 5's with your 10-digit number)
6b) HDR AN AUTH Password = (Your ESN(Hex) With CAPS)
6c) PPP USER ID = [email protected] (Same as above)
6d) PPP PASSWORD = vzw
I left DUN log on blank
Change settings under
7) Click OK in the top right corner and save and reboot.
Goto Start->Settings->Connections->Connections
9) Click Manage existing connections
10) Select Alltel Wireless and click Edit...
11) Click Next in the lower right cornder until you get to the user name and password screen
12a) Username is [email protected] (Same as above)
12b) Password is vzw
13) Click Finish in the lower right corner
14) Enjoy verizon wireless internet!
Also make sure you update your PRL to an verizon one.
Go to M.IP Default Profile.
Enable Profile: Enable
NAI: [email protected]
DUN NAI: leave blank
But know I cannot update my radio. This has been an issue since I unlocked my phone. I cannot get the bootloader to load from my 1 GB microSD. I am not sure what to do. XV 6900
I have had this problem for months now.I have tried everything possible. Called vzw i dunno how many time I dunno how many new A-keys I have had.I even tried these settings. Nothing seems to be workn.But who knows. Only way I can get internet on this phone is to manullay put my phone in 1x. which is way slow but it works
I got everything working great now. I ran the .40 unlocker and then flashed back to the factory ROM from HTC. I entered all of the setting back into the phone that I listed above and then flashed it again with the factory ROM. All of this put my phone back to factory. I then re flashed it with the 2.31 and was able to update radio and flash with the 6.5 ROM from SD card in phone.
Hi when i try to connect through activsync for tethering i receive a data call failure with the message
Error Code:67
Error Code 67 Registration Failure. Your PCS Vision username and/or password may be incorrect. Please try again.
i have tried many times but i am not able to fix this any help would be appreciated Thank you.
What's up peeps.. 4g is down due to upgrading radios and I have the common problem of an incorrect MAC Id .. I do have my MSL #.. Sprint just gave it to me ( but if anyone else needs it just search for MSL in the app. market and if you already have root access the MSL reader will nab it for you) so I dialed ##data# and changed my WIMAX NAI to my correct id, but how to I change my WIMAX MAC Id on my device..
What was wrong with ur nai?
Start with this
http://forum.xda-developers.com/showthread.php?t=715525&highlight=fastboot+oem
After that is fixed, and it creates the correct MAC.tree.xml file, check logcat to see whats going on. If you are getting invalid private key, your RSA keys are fooked. Restore a nandroid with AmonRa 1.80 to restore your keys and you should be ok.
This is typically caused by losing power during radio update (ie pulling the battery when it is still writing)
I recently changed my Cyanogen account password through the web interface. Naturally my phone shortly thereafter prompted me to log in again which I did. Then about a day later I was prompted to log in once more. And now it's been like that since I changed my password. I've tried changing the password back to what it was before but I still get prompted to log in every one or two days. I don't get any errors when I log in.
What's gone wrong?
Can I just remove my Cyanogen account from my phone and add it again? Or can I clear the cache somewhere?
Pls help. Thanks in advance.
So after tot back to stock, my phone refused to activate and prl/ profile updates fail with authentication error, and it fails to activate with "activate this device" in the settings menu.
No efs backup, and when i called sprint they tried to have me program it manually with the msl, but the msl they gave me failed. 000000 worked, and msid is set to 000000008747. Needless to say, the phone call was pointless.
I tried using cdma workshop and the like to write the meid dec, but even though the logs say it was a success but it didn't actually take.
Anyone know if there's another way to write meid, etc? Dialer code or something? I'm looking for a self-fix to avoid going to sprint to use my repair plan.