is this fixable ?
would converting it to android fix it ?
watercooled223 said:
is this fixable ?
would converting it to android fix it ?
Click to expand...
Click to collapse
I think you could learn a thing or two from this guy :
tytanick said:
Hello guys
BRAVO PVT3 SHIP S-ON
HBOOT-0.92.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
i have Recovery RA-desire-v2.0.0
1. Cant use revolutionary because my Hboot is unsupported
2. alpharev dont work either because of hboot version i suppose ?
3. Mounting SD in recovery ends: Can't mount /dev/block ...... (no such file or directory) E:Can't mount /sdcard
4. Partitioning dont work because recovery dont see SD (tried 2 differend sd cards, (i made even only fat32 under windows with EASEUS partition.
5. Everything i do in recovery on SD ends up with: Error: Run 'fs ext3' via adb !
6. fastboot oem enableqxdm 0 - wont work !
7. "fastboot erase system" - erasing 'system'...... FAILED (remote: not allowed)
8. i cant use Android Flasher cause i have S-ON
And still i cant make S-OFF because of hboot version ! WTF
Click to expand...
Click to collapse
watercooled223 said:
is this fixable ?
would converting it to android fix it ?
Click to expand...
Click to collapse
With this information it is impossible to help you! Read and follow what erklat posted or rather meant with it.
1. can you enter ure bootlaoder
2.do you have clockwork mod or a recovery installed ?
3. are you s off or s on ?
4. what did you do eg did you flash a certain file etc ?
Is it the "white htc screen" as in the boot animation? Or the boot logo? If it's the boot animation then a simple full wipe will solve all the problems but if it's the actual boot logo, then you may be in a big mess.
Related
Hello guys
BRAVO PVT3 SHIP S-ON
HBOOT-0.92.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
i have Recovery RA-desire-v2.0.0
1. Cant use revolutionary because my Hboot is unsupported
2. alpharev dont work either because of hboot version i suppose ?
3. Mounting SD in recovery ends: Can't mount /dev/block ...... (no such file or directory) E:Can't mount /sdcard
4. Partitioning dont work because recovery dont see SD (tried 2 differend sd cards, (i made even only fat32 under windows with EASEUS partition.
5. Everything i do in recovery on SD ends up with: Error: Run 'fs ext3' via adb !
6. fastboot oem enableqxdm 0 - wont work !
7. "fastboot erase system" - erasing 'system'...... FAILED (remote: not allowed)
8. i cant use Android Flasher cause i have S-ON
And still i cant make S-OFF because of hboot version ! WTF
Not so sure if this suggestion is workable or not.
Any chance that running a GB 2.3.3 RUU will correct the sdcard mounting problem and change the hboot that comes with the RUU then s-off with revolutionary ?
thats the point, i cant see in any way my sd card
and i dont have functional system
i have ONLY hboot and recovery which dont see SD
So, have you tried to run the RUU and it is not working ? You don't need an sdcard to run it.
And this thread should be in Q&A section.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
F yeah !!!
it finally worked after 3 RRU's
This one worked:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
Hello.
I was on CM7 since 1 year ago. I remember that I gain root access with unrevooked and then I flash the rom directly...
So yesterday I decided to install a new rom for my Desire (paranoid). So i format I format my SD-CARD + ext-4 partitioning... Wipe everything, flash the Rom and Gapps successfully. And then I'm stuck HTC logo.
So after 4 hours of searching everywhere the conclusion is :
- I'm not S-OFF
- I can't re flash CM7
- I can't make a GOLDCARD, and haven't found a correct RUU with no ID error.
- I read everything of this http://forum.xda-developers.com/showthread.php?t=1275632 and I dont know where to start, and most of tutorials says to connect the phone in debug mode but i haven't got rom (Possible via hboot?)
- fastboot working
- recovery always here
What I should do? I can't S-OFF without debug. And can't make a GOLDCARD even with a CID obtenned without rom.
Thanks for your help and sorry for my bad english.
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
+ ClockworkMod Recovery V2.5.0.7
And by wipe everything you meant formating /data and /system? You've done that? It's a very old recovery.try flashing 4ext from fastboot image file.
My HTC wildfire touch don't work after downgrade from 2.34.186.1 to from 2.34.186.1.
The branding ist 1und1. After this i try to find the original OTA 2.34.186.1 to upgrade
to the old one that was on the phone before. - no way - i don't found
After this i unlocked the bootloader and i think that there is a way to upgrade any firmware
but its not possible.
My bootscreen:
*** UNLOCKED ***
BUZZ PVT SHIP S-ON
HBOOT-1.02.0000
MICROP-0622
RADIO-3.35.15.31
Dec 13 2011,12:08:54
The HTC boot normaly to the lock screen but the touch don't work.
Anyone an idea to solve my problem an install another rom?
Here is another thread that discusses a similar issue.
Hope it'll help.
http://forum.xda-developers.com/showthread.php?t=1056767
Sent from my G9 using Tapatalk
Pretendde said:
My HTC wildfire touch don't work after downgrade from 2.34.186.1 to from 2.34.186.1.
The branding ist 1und1. After this i try to find the original OTA 2.34.186.1 to upgrade
to the old one that was on the phone before. - no way - i don't found
After this i unlocked the bootloader and i think that there is a way to upgrade any firmware
but its not possible.
My bootscreen:
*** UNLOCKED ***
BUZZ PVT SHIP S-ON
HBOOT-1.02.0000
MICROP-0622
RADIO-3.35.15.31
Dec 13 2011,12:08:54
The HTC boot normaly to the lock screen but the touch don't work.
Anyone an idea to solve my problem an install another rom?
Click to expand...
Click to collapse
Hmmm. This is going to be hard to get out of as you upgraded your Hboot. Does the phone still register fastboot commands? Also what downgrade thread did you follow?
Sent from my HTC Sensation using Tapatalk
It dont work at update with ruu shows the version 2.46.0.0 of the divece rom....
The update prozess stops and there is " FEHLER [155] : ABBILD-UPDATE-FEHLER " (IMAGE UPDATE ERROR)
The same with the PC49IMG.zip on microsd card:
RUU
Security fail!
Update Fail!
Pretendde said:
It dont work at update with ruu shows the version 2.46.0.0 of the divece rom....
The update prozess stops and there is " FEHLER [155] : ABBILD-UPDATE-FEHLER " (IMAGE UPDATE ERROR)
The same with the PC49IMG.zip on microsd card:
RUU
Security fail!
Update Fail!
Click to expand...
Click to collapse
That's not what I mean, to unlock your bootloader you would have had to issue the command fastboot OEM unlock, or fastboot flash OEM unlock unlock_token.bin or something similar. These types of commands are the ones I'm interested in I want to see if you can flash clockworkmod recovery pal.
Sent from my HTC Sensation using Tapatalk
I downgraded with the standard buzzdowngrade.zip package, step1 but the goldcard-step fail.....i flashed after hboot downgrade RUU_Buzz_Vodafone_DE_1und1_1.19.186.3_Radio_13.45.55.24_3.35.15.31_release_133745_signed.exe
Than was the problem with the touch ... it dont work.
After this i tryed many ruu's ....no way.
Than i downloaded from htcdev - PC4910000_Buzz_Froyo_hboot_1.02.0000_R3.exe and flashed and unlocked with Unlock_code.bin
I was thinking i would be able to unlock and update every rom
Pretendde said:
I downgraded with the standard buzzdowngrade.zip package, step1 but the goldcard-step fail.....i flashed after hboot downgrade RUU_Buzz_Vodafone_DE_1und1_1.19.186.3_Radio_13.45.55.24_3.35.15.31_release_133745_signed.exe
Than was the problem with the touch ... it dont work.
After this i tryed many ruu's ....no way.
Than i downloaded from htcdev - PC4910000_Buzz_Froyo_hboot_1.02.0000_R3.exe and flashed and unlocked with Unlock_code.bin
I was thinking i would be able to unlock and update every rom
Click to expand...
Click to collapse
Ok so fastboot works, good good. Do you have clockworkmod recovery installed? If not follow my thread for rooting hboot 1.02.0000 and install clockworkmod but go no further.
Also just for your information the ruu will not install because of
1. Your honor is higher than the ones in the RUU,
2 your bootloader is unlocked.
We need to downgrade you to the WWE rom with hboot 1.01.0001 and hopefully that will restore your touch panel to working order
Sent from my HTC Sensation using Tapatalk
Clockworkmod recovery is installed, rooting hboot 1.02.0000 o.k.
and now?
Pretendde said:
Clockworkmod recovery is installed, rooting hboot 1.02.0000 o.k.
and now?
Click to expand...
Click to collapse
ok so what we want to do know is downgrade your hboot to 1.01.0001 so to do that we need your misc partition to be edited. as such i would like you to boot the phone into clockworkmod recovery and connect it to the pc with a usb cable. windows should install the drivers if it has not done so already.
next you will need to set up your command prompt for using adb/fastboot commands.
then we will pull a copy of your misc partition to your sdcard and then copy it into your windows adb folder.
then you will upload that image to me, i will make the necessary changes and then re-upload for you.
then you will flash it to the phone all going well, re-lock your bootloader and then downgrade your hboot and rom and hopefully regain touch input
then as an extra if you want to use a rooted version of that german ruu you were trying to flash i can make you a "safe to flash" version
ok, so....
step 1. Connect your wildfire up to your pc In clockworkmod recovery mode.
step 2. open a command prompt within your adb/fastboot folder. (the same one you used to flash clockworkmod recovery)
step 3. enter the following commands one at a time. copy paste is recommended.
Code:
adb shell
su
cat /dev/mtd/mtd0 > /sdcard/misc.img
exit
exit
adb pull /sdcard/misc.img misc.img
step 4. Upload this file to somewhere like dropbox or media fire and then send me a link to it.
in command prompt
su
/sbin/sh: su: not found
what i do wrong?
Pretendde said:
in command prompt
su
/sbin/sh: su: not found
what i do wrong?
Click to expand...
Click to collapse
OK just skip that and move onto the next bit.
Sent from my Nexus 7 using Tapatalk
I attached this file here, i hope it is o.k.
It takes a while until i found out to mount the SD card before
Pretendde said:
I attached this file here, i hope it is o.k.
It takes a while until i found out to mount the SD card before
Click to expand...
Click to collapse
okey dokey, here is your new misc image. extract it into your adb folder.
i have edited this so it will re-lock your bootloader automatically once you have flashed it. one problem solved
also download this package, it has some tools you will need and the WWE rom you need to flash
lastly we need to make a goldcard. this will be hard given that your touch screen is non-functional. as such you will need a different, working android phone and YOUR sdcard. this trick is sdcard specific so dont swap them about
ok once you are ready with the right stuff, do these steps.
step 5. now we need to make a gold card. if you already have one, you can skip this part. first using your working android phone, download and install Goldcard helper from the android market. Run the app and copy down your SD cards reverse cid. double check it
step 6. now go to this website here and enter in your reverse cid. it will then let you download a goldcard.img.
step 7. now go back to the package you downloaded earlier with the WWE rom (named 1.01.zip) in it and run the goldcardtool.exe, this will flash the goldcard to your sd card. Warning! this will format your card!! in order to achieve this you will have to mount the sdcard from clockworkmod recovery to the computer, use mount usb storage and not mount sdcard.
step 8. once that is done we are now ready for the final push
Now the gold card is ready, i leave al the data on the goldcard, its not been formatted. Goldcard tool says, G: Goldcard is now ready.
The new misc image, must be copy to the phone ?
Pretendde said:
Now the gold card is ready, i leave al the data on the goldcard, its not been formatted. Goldcard tool says, G: Goldcard is now ready.
The new misc image, must be copy to the phone ?
Click to expand...
Click to collapse
ok from here copy the Nmisc.img to your sdcard and do not rename it, leave it on the sd card within no folders.
then connect up the phone in clockworkmod recovery again, and mount the sdcard with mount sdcard and not usb mass storage.
lastly make sure that the 1.01.zip is in your adb folder.
issue the following commands.
Code:
adb shell
(your shell symbol should be a #)
flash_image misc /sdcard/Nmisc.img
exit
(now it should not be a #)
adb reboot bootloader
The phone should not reboot into bootloader and should say at the top locked OOW.
This is ok, if it does not say this then your misc image was not flashed.
if all is well issue these commands.
Code:
fastboot oem rebootRUU
fastboot flash zip 1.01.zip
This will state an error, and that it needs to be reflushed. this is what we want, if any other issue your goldcard may have failed.
repeat the last command to reflush.
Code:
fastboot flash zip 1.01.zip
(this will take a while.)
fastboot reboot
the phone should reboot into the WWE stock rom and hopefully your touch screen will be working again. if it is proceed to s-off with revolutionary here ignore all but revolutionary and then if you want the german ruu as a safe flash rom send me a link to the ruu and I will make it. but it make take a few days.
im at work atm so my replys will be delayed pal, good luck
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 63.656s
i flashed 3 times....
Pretendde said:
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 63.656s
i flashed 3 times....
Click to expand...
Click to collapse
Your gold card has failed. Format the sdcard and then reissue the fastboot commands.
Sent from my HTC Sensation using Tapatalk
Yes the goldcard was bad, now its okay but n ow a new error :
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 56.078s
flashed 5 times ...same error
Pretendde said:
Yes the goldcard was bad, now its okay but n ow a new error :
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 56.078s
flashed 5 times ...same error
Click to expand...
Click to collapse
Does your bootloader still say locked?
Sent from my HTC Sensation using Tapatalk
heavy_metal_man said:
does your bootloader still say locked?
Sent from my htc sensation using tapatalk
Click to expand...
Click to collapse
yes
*** locked (00w) ***
hello
have flashed cynagonmod 10.2 endeavor to my htc one x -> all good , but after autoupdate to the suggested new version via download
my htc was in boot loop
-> so i flashed a recovery , i think the wrong one
now it shows:
relocked
hboot -1.72.0000
endeverou pvt ship s-on RL
radio 5.1204
can`t switch in recovery mode
which recovery should i flash via minimal adb and fastboot?
which command to unlock boot?
1000 thank`s for help
how can i get s-off to flash new recovery?
have downloaded recovery clockworktouch 5.8.4.0 endeavor for new flash
and
Ressurection Remixunoff20140622-endeavor for image
is this the wright one for me?
noobtotal said:
hello
have flashed cynagonmod 10.2 endeavor to my htc one x -> all good , but after autoupdate to the suggested new version via download
my htc was in boot loop
-> so i flashed a recovery , i think the wrong one
now it shows:
relocked
hboot -1.72.0000
endeverou pvt ship s-on RL
radio 5.1204
can`t switch in recovery mode
which recovery should i flash via minimal adb and fastboot?
which command to unlock boot?
1000 thank`s for help
how can i get s-off to flash new recovery?
have downloaded recovery clockworktouch 5.8.4.0 endeavor for new flash
and
Ressurection Remixunoff20140622-endeavor for image
is this the wright one for me?
Click to expand...
Click to collapse
Just go to HTCDEV.com unlock your bootloader via site and after this flash recovery philz 5.15.9 and after this new rom
thanks
Thant said:
Just go to HTCDEV.com unlock your bootloader via site and after this flash recovery philz 5.15.9 and after this new rom
Click to expand...
Click to collapse
Thanks for answer,
bootloader now unlocked,
now:
endeavoru pvt ship s-on RL
hboot -1.72.0000
cpld-none
microp-none
radio-5.1204.164d3.31
emmc dis
cpu dis
hw sec enabled
modem p off
now i can go to fastboot mode -> but after showing checking sd card: update P46IMG tries to install and failed
-> always i go into fastboot mode
-> now i have installed clockworkMod Recovery 5.8.4.0
can reach into recovery
can flash boot now also
but cant flash another os , always fails with 24 verifying android txt failed and aborted
-> i think the custom rom i have tried to install always tries to install after reboot
cid is vodap102
ty for help
noobtotal said:
Thanks for answer,
bootloader now unlocked,
now:
endeavoru pvt ship s-on RL
hboot -1.72.0000
cpld-none
microp-none
radio-5.1204.164d3.31
emmc dis
cpu dis
hw sec enabled
modem p off
now i can go to fastboot mode -> but after showing checking sd card: update P46IMG tries to install and failed
-> always i go into fastboot mode
-> now i have installed clockworkMod Recovery 5.8.4.0
can reach into recovery
can flash boot now also
but cant flash another os , always fails with 24 verifying android txt failed and aborted
-> i think the custom rom i have tried to install always tries to install after reboot
cid is vodap102
ty for help
Click to expand...
Click to collapse
install philz 5.15.9 recovery after this mount sd card and copy your custom rom to sd card after this flash boot.img from fastboot after this go in recovery and flash the rom if you want KK rom you must flash latest TWRP or CWM but ther have problem with mount sd card.
And sonmething else when you go to bootloader your phone must be disconnected from PC and when you are in bootloader conect to PC and you will see fastboot usb
problem solved!TY!
Thant said:
install philz 5.15.9 recovery after this mount sd card and copy your custom rom to sd card after this flash boot.img from fastboot after this go in recovery and flash the rom if you want KK rom you must flash latest TWRP or CWM but ther have problem with mount sd card.
And sonmething else when you go to bootloader your phone must be disconnected from PC and when you are in bootloader conect to PC and you will see fastboot usb
Click to expand...
Click to collapse
Thanks for help!
now on CM 10.2.1 endeavoru again tried philz and there i could see my sdcard , so i can push new rom to sd card;tried to flash the cm version, always failed code 23 or 7 ->
-> flash was possible after i haved deleted "asserts...............................; in the android-txt file (found here in xda forum) , i think there is proofed which version of rom and h-boot is on the phone . i deleted it (the first 4 lines up to :good: and saved it to the rom.zip-> then , no prob to flash the cm.zip via sd card; then flashed boot image from cm , deleted cache and factory reset , restart and now cm again
thanks for help !!!!!! great job! great forum here!
Hey Folks!
After the dead of my desire (7 buzzes / vibrates -> indicates a broken soc/motherboard) and the new rising (got a motherboard of a desire with a broken screen) the old lady worked again!
I got the s/n and system from the one with the broken screen - this is normal because it's stored on the mainboard. It was a CM v7 as I remember.
Here as a list of things I did and where I stuck now:
flashed an up-to-date recovery TWRP -> worked
tried to install a new rom with a new hboot which -> didn't worked out
Since here I only can access the recovery
All attempts to flash something (via recovery or fastboot) -> doesn't work
also tried to use revolutionary (even it's already unlooked and s-off) -> but the app stucks
I could only flash the boot logo via fastboot the rest results in different errors like:
CID incorrect (pb99img.zip method)
Error (When trying to flash a .zip via recovery)
And an other Error i forgott (when flash via fastboot)
Also i can't get an information via fastboot (-getvar all). There is always a errormessage.
Here is my hboot-screen
Code:
*** AlphaRev***
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
I'm not sure if something went wrong while trying to put a new hboot (partition-layout).
I have no idea what to do. Read about the half of the internet....
Anyone any idea?
Here is an other error message i get when running this fastboot command
Code:
fastboot getvar all
getvar:all FAILED (status malformed (1 bytes))
finished. total time: 0.001s
I'm realy appreciate any help!
BTW: I'm not a robot!
Des!re said:
CID incorrect (pb99img.zip method)
Error (When trying to flash a .zip via recovery)
And an other Error i forgott (when flash via fastboot)
Also i can't get an information via fastboot (-getvar all). There is always a errormessage.
Here is my hboot-screen
Code:
*** AlphaRev***
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
I'm not sure if something went wrong while trying to put a new hboot (partition-layout).
I have no idea what to do. Read about the half of the internet....
Anyone any idea?
Click to expand...
Click to collapse
So good news is that it's not bricked if you can reach bootloader and recovery screen. Sounds like a driver issue or bad download of ROM, or both.
A few things to note:
- You haven't changed hboot because it still says 'Alpharev' on top of the bootloader screen. It should say the name of the hboot e.g. Alpharev CM7R2 if successful.
- CID incorrect happens when you try to flash a different region RUU. You should have tried the 2.3.3 GB WWE RUU, many threads in Q&A cover this.
- You should always try 'fastboot devices' command before flashing anything via fastboot, this will tell you straight away if you have driver issues.
This info I must have learnt reading the other half of the internet ...
What I would do:
- Confirm that fastboot is working first, check your drivers. Did you flash the recovery using fastboot? Flashing an hboot is largely the same method.
- Verify that the md5sum of the ROM.zip is correct on PC before flashing. Test several ROMs to be sure.
- Verify that the ROM is also compatible with the hboot as well or it won't boot.
- Make sure you nandroid backup if you have anything to save, then full wipe (wipe data/factory reset) before flashing the ROM.
- Make sure your sd card is correctly partitioned if the ROM requires one., as some put parts of the ROM on the partition. You will need a partition to install more than a few apps anyway.
- Post / research the exact error message if it's still not working, and at least state which ROMs you've tried.
eddiehk6 said:
So good news is that it's not bricked if you can reach bootloader and recovery screen. Sounds like a driver issue or bad download of ROM, or both.
A few things to note:
- You haven't changed hboot because it still says 'Alpharev' on top of the bootloader screen. It should say the name of the hboot e.g. Alpharev CM7R2 if successful.
- CID incorrect happens when you try to flash a different region RUU. You should have tried the 2.3.3 GB WWE RUU, many threads in Q&A cover this.
- You should always try 'fastboot devices' command before flashing anything via fastboot, this will tell you straight away if you have driver issues.
This info I must have learnt reading the other half of the internet ...
Click to expand...
Click to collapse
Thanks for your reply. Some things I forgot to mention in the thread above.
I successfully rooted, s-off, and flashed a new hboot & rom to my old desire.... all before she died. I remembered I needed some tries for the hboot... but it worked out fine in the end.
I also need to say that I tried (with the new/repaired one) different clients (hardware and os, win & linux) and different cables. Just to be sure.
I also went sure that fastboot is working (fastboot devices) and there always was my serial -> so it's good for sure
I read something about that the Alpharev hboot (with the repaired phone there was also the bootsplash with 'alpha-rev s-off / why so serious?' before I flashed it away to the stock 'htc') is somehow write-protected itself which can cause issues???
I tried to flash the "Alpha Jelly (250/5/182) hboot" to be able to install CarbonRom 1.0 (4.4.4) by spezi77 (http://forum.xda-developers.com/showthread.php?t=2658853). But I didn't succeeded at all.
eddiehk6 said:
What I would do:
- Confirm that fastboot is working first, check your drivers. Did you flash the recovery using fastboot? Flashing an hboot is largely the same method.
Click to expand...
Click to collapse
I think I flashed the recovery via fastboot, it just worked once. When I tried to flash CWM it didn't worked anymore.
eddiehk6 said:
- Verify that the md5sum of the ROM.zip is correct on PC before flashing. Test several ROMs to be sure.
Click to expand...
Click to collapse
I did checked the md5sum's and I tested a couple of Roms (more than 3)
eddiehk6 said:
- Verify that the ROM is also compatible with the hboot as well or it won't boot.
Click to expand...
Click to collapse
My old devices was a PVT4 and the repaired one is a PVT1 - there should be no difference for the hboot i guess?
eddiehk6 said:
- Make sure you nandroid backup if you have anything to save, then full wipe (wipe data/factory reset) before flashing the ROM.
Click to expand...
Click to collapse
This I should have done straight after I repaired the hardware and I was able to boot in CM7.... To late for now but if I have a working state I definitely do this!! :good:
eddiehk6 said:
- Make sure your sd card is correctly partitioned if the ROM requires one., as some put parts of the ROM on the partition. You will need a partition to install more than a few apps anyway.
Click to expand...
Click to collapse
I don't have a booting system yet so I need to postpone this. To be able to do the pb99img.zip method i formatted the whole sd-card with one partition as fat32. But when I have (hopefully) soon a working system I need to partion it correctly - easy!
eddiehk6 said:
- Post / research the exact error message if it's still not working, and at least state which ROMs you've tried.
Click to expand...
Click to collapse
I'm the resarcher! I'm going down to reasearch - I will report!
Thanks for your help so far!
I'm the resarcher! I'm going down to reasearch - I will report!
Click to expand...
Click to collapse
I went down to research!
I tried to flash hboot 'Bravo Stock' by Alpharev.
Code:
fastboot flash hboot bravo_alphaspl.img
sending 'hboot' (512 KB)...
OKAY [ 0.104s]
writing 'hboot'...
OKAY [ 0.160s]
finished. total time: 0.264s
looks good for me!
the bootscreen changed from
Code:
*** AlphaRev***
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
to
Code:
--- AlphaRev ---
BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
so first and third line changed!
And because it's so nice to flash hboot i also flashed AlphaRev Jelly successfully!!
I try flash a rom now :fingers-crossed:
After I successfully flashed my hboot (twice!)....
I'm not able to wipe or install stuff....
Team Win Recovery Project v2.7.1.0
WIPE -> Factory Reset (Wipe Data, Cache and Dalvik)
Code:
Factory Reset Complete
Failed
E:Find_File: Error opening '/sys/class/backlight'
E:Unable to recreate and-sec folder.
Updating partition details...
E:Unable to mount storage
E:Unable to mount /sdcard during GUI startup.
Full SELinux support is present.
E:Unabke to mount /sdcard/TWRP/.twrps when trying to read settings file.
MTD Formatting "cache"
Done.
MTD Formatting "userdata"
Done.
Updatting partition details...
E:Unable to mount storage.
### FAILED ###
Team Win Recovery Project v2.7.1.0
Install -> ZIP
Code:
Zip Install Complete
Failed
E:Find_File: Error opening '/sys/class/backlight'
Updating partition details...
Full SELinux support is present.
Installing '/sdcard/roms/CARBON-KK-UNOFFICIAL-20140914-1119-bravo.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
E:Could not create file for updater extract in '/tmp/updater'
Error flashing zip '/sdcard/roms/CARBON-KK-UNOFFICIAL-20140914-1119-bravo.zip'
Updatting partition details...
### FAILED ###
Maybe there is something "broken" with the filesystem?
As always I appreciate any help
Did a 'clear userdata' in the boot menu and then a wipe via TWRP.
Now it was successful but with this errors in the console:
Code:
Factory Reset Complete
Successful
E:Find_File: Error opening '/sys/class/backlight'
Updating partition details...
Full SELinux support is present.
MTD Formatting "cache"
Done.
MTD Formatting "userdata"
Done.
Wiping Android Secure
Formatting SD-Ext using make_ext4fs function.
Updating partition details...
But I wonder where are these errors from
Installing a rom still doesn't work. I think the problem is this line:
Code:
E:Could not create file for updater extract in '/tmp/updater'
There is BIG FAT BUG in the newest TWRP (v2.7.1.0)
You can't install anything before manually create the tmp directory
You have to do the following steps to flash any files :
- boot into recovery mode
- choose 'Advanced'
- choose 'Terminal Command'
- You're now on the '/' (root of the file system). Choose 'Select'
- Type : 'mkdir tmp' without quotes, then Hit the enter key of your keyboard.
- Return to the main screen (Go back 3 times)
- Choose 'Install' and select the file.
Click to expand...
Click to collapse
>>> http://forum.xda-developers.com/showthread.php?t=2595654&page=12
This is to bad - it's the most recent version and the recovery has a bug like this!
Code:
Installing Carbonrom 4.4.4. for HTC Desire
Homemade by spezi77
Next shot should be Lollipop :victory:
[ROM/WIP] [5.0.2] [Jan-17] [UNOFFICIAL] ParanoidAndroid 5.0 Alpha
>>> http://forum.xda-developers.com/htc-desire/development/rom-paranoidandroid-5-0-alpha-t3002046
Des!re said:
There is BIG FAT BUG in the newest TWRP (v2.7.1.0)
You can't install anything before manually create the tmp directory
>>> http://forum.xda-developers.com/showthread.php?t=2595654&page=12
This is to bad - it's the most recent version and the recovery has a bug like this!
Code:
Installing Carbonrom 4.4.4. for HTC Desire
Homemade by spezi77
Next shot should be Lollipop :victory:
[ROM/WIP] [5.0.2] [Jan-17] [UNOFFICIAL] ParanoidAndroid 5.0 Alpha
>>> http://forum.xda-developers.com/htc-desire/development/rom-paranoidandroid-5-0-alpha-t3002046
Click to expand...
Click to collapse
I've personally never used TWRP on the Desire.
I recommend trying with 4EXT Recovery, never had any issues with it.
If you can successfully flash an hboot, you should be able to flash the recovery.img using the same method.