[Q] Stuck without ROM and S-ON - Desire Q&A, Help & Troubleshooting

Hello.
I was on CM7 since 1 year ago. I remember that I gain root access with unrevooked and then I flash the rom directly...
So yesterday I decided to install a new rom for my Desire (paranoid). So i format I format my SD-CARD + ext-4 partitioning... Wipe everything, flash the Rom and Gapps successfully. And then I'm stuck HTC logo.
So after 4 hours of searching everywhere the conclusion is :
- I'm not S-OFF
- I can't re flash CM7
- I can't make a GOLDCARD, and haven't found a correct RUU with no ID error.
- I read everything of this http://forum.xda-developers.com/showthread.php?t=1275632 and I dont know where to start, and most of tutorials says to connect the phone in debug mode but i haven't got rom (Possible via hboot?)
- fastboot working
- recovery always here
What I should do? I can't S-OFF without debug. And can't make a GOLDCARD even with a CID obtenned without rom.
Thanks for your help and sorry for my bad english.
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
+ ClockworkMod Recovery V2.5.0.7

And by wipe everything you meant formating /data and /system? You've done that? It's a very old recovery.try flashing 4ext from fastboot image file.

Related

HTC Desire Bricked or there is still some hope?

Hi people i have a s-off desire with alpharev cm7r2 HBOOT and was stucked on the htc quietly brilliant logo when was booting and i decided to install a stock RUU and i had a error 110 during the installation and now when i turn on my phone it have the htc logo with 4 exclamation triangles in the corners,i cant enter fastboot,bootloader acess the sd card...i cant do nothing i tried with all the RUU that i find and it always stuck on the system part when te RUU is installing,then i have the 110 error....
Only that i see after the RUU fails is this
White screen with this text:
Alpharev CM/ r2
Bravo PVT4 SHIP S-OFF
MICROP 051d
TOUCH PANEL-SYNW0101
RADIO-4,05,00,11
August 10 2010,17:52:18
Any chance to do something?
Please help me people!
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Floatshow said:
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Click to expand...
Click to collapse
OMG man i love you!!!!!!!!!!!! i spend 3 long days to figure what to do and it was so simple.....thanks a lot! Solved now!
I was also worried when I saw these triangles
(They are very scary )
dear sir, how can I flash the HBOOT not ?? fastboot ??? pls give me some detail....
Floatshow said:
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Click to expand...
Click to collapse
smileking said:
dear sir, how can I flash the HBOOT not ?? fastboot ??? pls give me some detail....
Click to expand...
Click to collapse
You can flash another HBOOT from fastboot mode. Your device must be S-OFF.
To boot in fastboot mode, turn off your phone, press vol down button, and then power button, you will be in HBOOT mode. First entry of the menu is Fastboot. Select it with power button. You can flash another hboot from here.
To flash an hboot, you must have the fastboot binary for your computer.
You can find them here :
http://developer.htc.com/adp.html (search for fastboot, you will have download links for Windows, mac os x and linux)
First, check that your device is detected :
Code:
fastboot.exe devices (Windows)
Code:
./fastboot(-mac) devices (Mac OS X / Linux)
It should return something like this :
Code:
SH******* fastboot (numbers after SH are different for each device)
Next, download the hboot you want to flash, and run the fastboot binary via console, terminal, or whatever you want with the following :
Code:
fastboot.exe flash hboot name_of_hboot.img [B](Windows)[/B]
Code:
./fastboot(-mac) flash hboot name_of_hboot.img [B](Mac OS X / Linux)[/B]
Or, if you are on Windows, you can use AndroidFlasher (link), which does the same, but with a graphical interface.
to install a new HBOOT your device needs to be S-OFF, you can use fastboot commander to do so. for fastboot commander to work you will need adb drivers and java sdk. Then download a HBOOT from the alpharev.nl website.
NOTE: if you have a HBOOT from alpharev, and you run a RUU IT WILL NOT RESTORE THE HBOOT TO THE STOCK VERSION therefore, if you wish to fully unroot, you firstly need to flash the downgrader (also found on alpharev), and then run the RUU.
Friends, my HTC is Stucked ive tried a lot of things and it doesnt answer, i cannot access Hboot anymore, if i try to put in fastboot mode it appear the 4 triangles with exclamation in corners, ive tried to put an RUU_HTC Desire Android 2.3 Upgrade (Gingerbread) but i got an error on radio update, and signature, ive tried a lot of RUU
Bravo PVT1 ship S-ON
HBOOT-1.02.0001
RADIO 5.11.05.27
Plzzzz help me
paulino633 said:
Friends, my HTC is Stucked ive tried a lot of things and it doesnt answer, i cannot access Hboot anymore, if i try to put in fastboot mode it appear the 4 triangles with exclamation in corners, ive tried to put an RUU_HTC Desire Android 2.3 Upgrade (Gingerbread) but i got an error on radio update, and signature, ive tried a lot of RUU
Bravo PVT1 ship S-ON
HBOOT-1.02.0001
RADIO 5.11.05.27
Plzzzz help me
Click to expand...
Click to collapse
i have the same problem
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
AUG 10 2010,17:52:10
same issue help me please.
Dear sir,
I have the same issue( Htc black screen with 4 "!" marks. with the following screen
-Revoloutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Aug 10 2010, 17:52:18
RUU
--------------------
Pls help me on this how retore original version
prasannaek said:
Dear sir,
I have the same issue( Htc black screen with 4 "!" marks. with the following screen
-Revoloutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Aug 10 2010, 17:52:18
RUU
--------------------
Pls help me on this how retore original version
Click to expand...
Click to collapse
petidis said:
i have the same problem
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
AUG 10 2010,17:52:10
Click to expand...
Click to collapse
Hi guys
There is a guide on top of Q&A section... why not use it? Please hit the thanks button there... he deserves it

Desire definitely dead ? stuck on bootloader

Hi,
I think my Desire is definitely dead...
After a lot of try, nothing happen.
So what I did :
- Flash stock hboot for change my rom to JB
- after the flash, go to recovery for format all/install rom
- in recovery, impossible to format or do anything (usb storage, etc.)
- reboot in fastboot, after a few try, I get S-ON, but the alpharev screen is still here at boot.
So I'm here :
- recovery accessible but nothing works
- fastboot accessible but "FAILED (status malformed (1 bytes)" for each command I try
- desire on S-ON ?
- adb not accessible
And ... every boot go to bootloader
I'm not a new who want to flash for the first time, I have my desire for 2 years now, and flash a lot of hboot/rom...
Any help greatly accepted !!
EDIT : I succesfully(?) flashed "Bravrange_FR_1.15.73.12_Radio_32.30.00.28U_4.02.00.11.zip" (--> PB99IMG.zip) but when reboot, the phone go immediately in bootloader....
EDIT 2 : After re-installed all pilote, I'm able to flash a RUU directly from windows, and now all is OK !!! (go root-soff-hboot-JB now )
(sorry for my english)
BRAVO PT1 SHIP S-ON
Hboot-1.02.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
Jul 22 2011, 16:19:16

Help install Rom

Hi
My English is not good (with the help of Google Translator wrote the text!)
I wanted to upgrade phone ROM, but I've had the problem of
The phone is rooted and s-off
I chose to do the following for threads:
http://forum.xda-developers.com/showthread.php?t=2651790
According to the guideline developer ROM
Must be installed TWRP recovery. (Cwm recovery I was put in its place I installed TWRP)
But after installing this recovery is anything to do with errors.
Errors:
E:Find_File: Error opening '/sys/class/backlight'
...
...
...
E:Could not creat file for updater extract in '/tem/updater'
Error flashing zip '/sdcard/BeanStalk-4.4.4407-20140713-bravo-RC6.zip'
=======
I tested other rom (different for threads)
Got the same errors
After this I could not even install 4ext recovery
error:
CID incorrect
===========
Information in the boot will be displayed:
----Alpha Rev----
BRAVO PVT4 SHIP S-OFF
HBOOT-0.93.0001
MICROP_051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Aug 10 2010,17:52:18
==============
Please advise your
Thanks

[Q&A] Semi bricked Desire

Hey Folks!
After the dead of my desire (7 buzzes / vibrates -> indicates a broken soc/motherboard) and the new rising (got a motherboard of a desire with a broken screen) the old lady worked again!
I got the s/n and system from the one with the broken screen - this is normal because it's stored on the mainboard. It was a CM v7 as I remember.
Here as a list of things I did and where I stuck now:
flashed an up-to-date recovery TWRP -> worked
tried to install a new rom with a new hboot which -> didn't worked out
Since here I only can access the recovery
All attempts to flash something (via recovery or fastboot) -> doesn't work
also tried to use revolutionary (even it's already unlooked and s-off) -> but the app stucks
I could only flash the boot logo via fastboot the rest results in different errors like:
CID incorrect (pb99img.zip method)
Error (When trying to flash a .zip via recovery)
And an other Error i forgott (when flash via fastboot)
Also i can't get an information via fastboot (-getvar all). There is always a errormessage.
Here is my hboot-screen
Code:
*** AlphaRev***
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
I'm not sure if something went wrong while trying to put a new hboot (partition-layout).
I have no idea what to do. Read about the half of the internet....
Anyone any idea?
Here is an other error message i get when running this fastboot command
Code:
fastboot getvar all
getvar:all FAILED (status malformed (1 bytes))
finished. total time: 0.001s
I'm realy appreciate any help!
BTW: I'm not a robot!
Des!re said:
CID incorrect (pb99img.zip method)
Error (When trying to flash a .zip via recovery)
And an other Error i forgott (when flash via fastboot)
Also i can't get an information via fastboot (-getvar all). There is always a errormessage.
Here is my hboot-screen
Code:
*** AlphaRev***
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
I'm not sure if something went wrong while trying to put a new hboot (partition-layout).
I have no idea what to do. Read about the half of the internet....
Anyone any idea?
Click to expand...
Click to collapse
So good news is that it's not bricked if you can reach bootloader and recovery screen. Sounds like a driver issue or bad download of ROM, or both.
A few things to note:
- You haven't changed hboot because it still says 'Alpharev' on top of the bootloader screen. It should say the name of the hboot e.g. Alpharev CM7R2 if successful.
- CID incorrect happens when you try to flash a different region RUU. You should have tried the 2.3.3 GB WWE RUU, many threads in Q&A cover this.
- You should always try 'fastboot devices' command before flashing anything via fastboot, this will tell you straight away if you have driver issues.
This info I must have learnt reading the other half of the internet ...
What I would do:
- Confirm that fastboot is working first, check your drivers. Did you flash the recovery using fastboot? Flashing an hboot is largely the same method.
- Verify that the md5sum of the ROM.zip is correct on PC before flashing. Test several ROMs to be sure.
- Verify that the ROM is also compatible with the hboot as well or it won't boot.
- Make sure you nandroid backup if you have anything to save, then full wipe (wipe data/factory reset) before flashing the ROM.
- Make sure your sd card is correctly partitioned if the ROM requires one., as some put parts of the ROM on the partition. You will need a partition to install more than a few apps anyway.
- Post / research the exact error message if it's still not working, and at least state which ROMs you've tried.
eddiehk6 said:
So good news is that it's not bricked if you can reach bootloader and recovery screen. Sounds like a driver issue or bad download of ROM, or both.
A few things to note:
- You haven't changed hboot because it still says 'Alpharev' on top of the bootloader screen. It should say the name of the hboot e.g. Alpharev CM7R2 if successful.
- CID incorrect happens when you try to flash a different region RUU. You should have tried the 2.3.3 GB WWE RUU, many threads in Q&A cover this.
- You should always try 'fastboot devices' command before flashing anything via fastboot, this will tell you straight away if you have driver issues.
This info I must have learnt reading the other half of the internet ...
Click to expand...
Click to collapse
Thanks for your reply. Some things I forgot to mention in the thread above.
I successfully rooted, s-off, and flashed a new hboot & rom to my old desire.... all before she died. I remembered I needed some tries for the hboot... but it worked out fine in the end.
I also need to say that I tried (with the new/repaired one) different clients (hardware and os, win & linux) and different cables. Just to be sure.
I also went sure that fastboot is working (fastboot devices) and there always was my serial -> so it's good for sure
I read something about that the Alpharev hboot (with the repaired phone there was also the bootsplash with 'alpha-rev s-off / why so serious?' before I flashed it away to the stock 'htc') is somehow write-protected itself which can cause issues???
I tried to flash the "Alpha Jelly (250/5/182) hboot" to be able to install CarbonRom 1.0 (4.4.4) by spezi77 (http://forum.xda-developers.com/showthread.php?t=2658853). But I didn't succeeded at all.
eddiehk6 said:
What I would do:
- Confirm that fastboot is working first, check your drivers. Did you flash the recovery using fastboot? Flashing an hboot is largely the same method.
Click to expand...
Click to collapse
I think I flashed the recovery via fastboot, it just worked once. When I tried to flash CWM it didn't worked anymore.
eddiehk6 said:
- Verify that the md5sum of the ROM.zip is correct on PC before flashing. Test several ROMs to be sure.
Click to expand...
Click to collapse
I did checked the md5sum's and I tested a couple of Roms (more than 3)
eddiehk6 said:
- Verify that the ROM is also compatible with the hboot as well or it won't boot.
Click to expand...
Click to collapse
My old devices was a PVT4 and the repaired one is a PVT1 - there should be no difference for the hboot i guess?
eddiehk6 said:
- Make sure you nandroid backup if you have anything to save, then full wipe (wipe data/factory reset) before flashing the ROM.
Click to expand...
Click to collapse
This I should have done straight after I repaired the hardware and I was able to boot in CM7.... To late for now but if I have a working state I definitely do this!! :good:
eddiehk6 said:
- Make sure your sd card is correctly partitioned if the ROM requires one., as some put parts of the ROM on the partition. You will need a partition to install more than a few apps anyway.
Click to expand...
Click to collapse
I don't have a booting system yet so I need to postpone this. To be able to do the pb99img.zip method i formatted the whole sd-card with one partition as fat32. But when I have (hopefully) soon a working system I need to partion it correctly - easy!
eddiehk6 said:
- Post / research the exact error message if it's still not working, and at least state which ROMs you've tried.
Click to expand...
Click to collapse
I'm the resarcher! I'm going down to reasearch - I will report!
Thanks for your help so far!
I'm the resarcher! I'm going down to reasearch - I will report!
Click to expand...
Click to collapse
I went down to research!
I tried to flash hboot 'Bravo Stock' by Alpharev.
Code:
fastboot flash hboot bravo_alphaspl.img
sending 'hboot' (512 KB)...
OKAY [ 0.104s]
writing 'hboot'...
OKAY [ 0.160s]
finished. total time: 0.264s
looks good for me!
the bootscreen changed from
Code:
*** AlphaRev***
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
to
Code:
--- AlphaRev ---
BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
so first and third line changed!
And because it's so nice to flash hboot i also flashed AlphaRev Jelly successfully!!
I try flash a rom now :fingers-crossed:
After I successfully flashed my hboot (twice!)....
I'm not able to wipe or install stuff....
Team Win Recovery Project v2.7.1.0
WIPE -> Factory Reset (Wipe Data, Cache and Dalvik)
Code:
Factory Reset Complete
Failed
E:Find_File: Error opening '/sys/class/backlight'
E:Unable to recreate and-sec folder.
Updating partition details...
E:Unable to mount storage
E:Unable to mount /sdcard during GUI startup.
Full SELinux support is present.
E:Unabke to mount /sdcard/TWRP/.twrps when trying to read settings file.
MTD Formatting "cache"
Done.
MTD Formatting "userdata"
Done.
Updatting partition details...
E:Unable to mount storage.
### FAILED ###
Team Win Recovery Project v2.7.1.0
Install -> ZIP
Code:
Zip Install Complete
Failed
E:Find_File: Error opening '/sys/class/backlight'
Updating partition details...
Full SELinux support is present.
Installing '/sdcard/roms/CARBON-KK-UNOFFICIAL-20140914-1119-bravo.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
E:Could not create file for updater extract in '/tmp/updater'
Error flashing zip '/sdcard/roms/CARBON-KK-UNOFFICIAL-20140914-1119-bravo.zip'
Updatting partition details...
### FAILED ###
Maybe there is something "broken" with the filesystem?
As always I appreciate any help
Did a 'clear userdata' in the boot menu and then a wipe via TWRP.
Now it was successful but with this errors in the console:
Code:
Factory Reset Complete
Successful
E:Find_File: Error opening '/sys/class/backlight'
Updating partition details...
Full SELinux support is present.
MTD Formatting "cache"
Done.
MTD Formatting "userdata"
Done.
Wiping Android Secure
Formatting SD-Ext using make_ext4fs function.
Updating partition details...
But I wonder where are these errors from
Installing a rom still doesn't work. I think the problem is this line:
Code:
E:Could not create file for updater extract in '/tmp/updater'
There is BIG FAT BUG in the newest TWRP (v2.7.1.0)
You can't install anything before manually create the tmp directory
You have to do the following steps to flash any files :
- boot into recovery mode
- choose 'Advanced'
- choose 'Terminal Command'
- You're now on the '/' (root of the file system). Choose 'Select'
- Type : 'mkdir tmp' without quotes, then Hit the enter key of your keyboard.
- Return to the main screen (Go back 3 times)
- Choose 'Install' and select the file.
Click to expand...
Click to collapse
>>> http://forum.xda-developers.com/showthread.php?t=2595654&page=12
This is to bad - it's the most recent version and the recovery has a bug like this!
Code:
Installing Carbonrom 4.4.4. for HTC Desire
Homemade by spezi77
Next shot should be Lollipop :victory:
[ROM/WIP] [5.0.2] [Jan-17] [UNOFFICIAL] ParanoidAndroid 5.0 Alpha
>>> http://forum.xda-developers.com/htc-desire/development/rom-paranoidandroid-5-0-alpha-t3002046
Des!re said:
There is BIG FAT BUG in the newest TWRP (v2.7.1.0)
You can't install anything before manually create the tmp directory
>>> http://forum.xda-developers.com/showthread.php?t=2595654&page=12
This is to bad - it's the most recent version and the recovery has a bug like this!
Code:
Installing Carbonrom 4.4.4. for HTC Desire
Homemade by spezi77
Next shot should be Lollipop :victory:
[ROM/WIP] [5.0.2] [Jan-17] [UNOFFICIAL] ParanoidAndroid 5.0 Alpha
>>> http://forum.xda-developers.com/htc-desire/development/rom-paranoidandroid-5-0-alpha-t3002046
Click to expand...
Click to collapse
I've personally never used TWRP on the Desire.
I recommend trying with 4EXT Recovery, never had any issues with it.
If you can successfully flash an hboot, you should be able to flash the recovery.img using the same method.

After unlocking bootloader system won't start

Hi guys!
So here i am....
I had some problems with my htc running on CM 11, and i decided to go to firmware again, yet i forgot that i had s-on... so i had relocked the bootloader than i had unlock it again with htcdev token, after this operation the phone is not starting the cm 11 system. it goes only to the cm blue circle logo with loading and nothing more happen.
I thought that i will reinstall the rom from recovery.... and now i have a problem the recovery don't see the interior memory (SD?) where is the rom.zip. and i am not able to make the wipe or factory reset.
So i thought that i will use an external SD card, butwhen i had placed the rom on the sd card and plug the card in the phone the hboot shows some info that img 0p6bdiag.zip not found no image or wrong image.... and after i go to recovery form the bootloader and select the external sd card the recovery shows that the card is empty... but it is not. i tried to make aslo the rom by adb sideload, there is the comunication because it is sending the rom to the device but it is not installing it on the device...
AAA and one more thing i had extract the boot.img from the cm11 rom to the phone several times with no help
below the info from bootloader:
M8_UL PVT SHIP S-ON
HBOOT-3.16.0.0000
RADIO-1.15.2133156.UA13G
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.54.69.5
eMMC-BOOT 2048
TWRP 2.7.0.2
I don't know what to do.... please help me if someone could help me.....
luki19876666 said:
Hi guys!
So here i am....
I had some problems with my htc running on CM 11, and i decided to go to firmware again, yet i forgot that i had s-on... so i had relocked the bootloader than i had unlock it again with htcdev token, after this operation ...
M8_UL PVT SHIP S-ON
HBOOT-3.16.0.0000
RADIO-1.15.2133156.UA13G
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.54.69.5
eMMC-BOOT 2048
TWRP 2.7.0.2
I don't know what to do.... please help me if someone could help me.....
Click to expand...
Click to collapse
May I suggest flashing philz recovery through fastboot and trying to wipe and install the ROM through the new recovery?
luki19876666 said:
Hi guys!
So here i am....
I had some problems with my htc running on CM 11, and i decided to go to firmware again, yet i forgot that i had s-on... so i had relocked the bootloader than i had unlock it again with htcdev token, after this operation the phone is not starting the cm 11 system. it goes only to the cm blue circle logo with loading and nothing more happen.
I thought that i will reinstall the rom from recovery.... and now i have a problem the recovery don't see the interior memory (SD?) where is the rom.zip. and i am not able to make the wipe or factory reset.
So i thought that i will use an external SD card, butwhen i had placed the rom on the sd card and plug the card in the phone the hboot shows some info that img 0p6bdiag.zip not found no image or wrong image.... and after i go to recovery form the bootloader and select the external sd card the recovery shows that the card is empty... but it is not. i tried to make aslo the rom by adb sideload, there is the comunication because it is sending the rom to the device but it is not installing it on the device...
AAA and one more thing i had extract the boot.img from the cm11 rom to the phone several times with no help
below the info from bootloader:
M8_UL PVT SHIP S-ON
HBOOT-3.16.0.0000
RADIO-1.15.2133156.UA13G
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.54.69.5
eMMC-BOOT 2048
TWRP 2.7.0.2
I don't know what to do.... please help me if someone could help me.....
Click to expand...
Click to collapse
Your recovery is ancient. Update to at least TWRP2.8.4.0.
You could also try Philz as stated above, but as far as I know, that recovery is no longer maintained and has not been updated in quite some time.

Categories

Resources