<hi guys , I was wonering if there was a way to fix the wifi error when I flash a new kernel . I'm on cm 7.2. The wifi will not turn on when I flash a kernel. So I have to reflash the cm7 one to get wifi
Sent from my SPH-D700 using xda premium
Sam v boy said:
<hi guys , I was wonering if there was a way to fix the wifi error when I flash a new kernel . I'm on cm 7.2. The wifi will not turn on when I flash a kernel. So I have to reflash the cm7 one to get wifi
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Did you try this from the CM7 wiki or in the threads where people had wifi problems:
Q: WIFI doesn't connect properly.
A: Issue should be fixed by CM7 RC0 but if issue still persists, make sure WIFI sleep policy is set to never. If issue continues, Use a file explorer with root write capabilities, navigate to /system/etc/wifi/ and delete "wifi_supplicant.conf". Reboot, you will need to reinput your wifi passwords if you had any.
Hello so I install V6 Supercharge( needs busybox 1.18.2) script and it was awesome. But I notice that my wifi want not working even though it had all 3 signal bars. So I uninstall V6 supercharged and busybox app. However it still didn't solve the problem.
So I decided to clean my entire system so I installed a brand new version of Juggernaut 4.1 but the problem still doesn't go way
For example, I'm using wifi and it had the 3 signal bars. Then it just dies but the wifi signal stay there its unchanged. The only way to fix is to turn wifi off then turn it back.
DO YOU GUYS HAVE ANY SUGGESTIONS OF???
THANK YOU
Sent from my SGH-T989 using Tapatalk
how about flashing it back to stock via Odin
then load back Jugg 4.1 ?
AllGamer said:
how about flashing it back to stock via Odin
then load back Jugg 4.1 ?
Click to expand...
Click to collapse
OK I have a backup of the first time I rooted my phone so ill try that first.
Thanks
Sent from my SGH-T989 using Tapatalk
Please help me about my gio i updated it yesterday but bluetooth and wifi status is error. 2.3.4
What kind of error? Can you be a bit more specific??
Sent from my GT-S5660 using xda premium
I update my gio to gingerbread 2.3.4 using odin, after that i try using wifi and bluetooth it always says error. i check my status of my phone WIFI MAC address unavailable bluetooth address also unavailable
johnarela said:
I update my gio to gingerbread 2.3.4 using odin, after that i try using wifi and bluetooth it always says error. i check my status of my phone WIFI MAC address unavailable bluetooth address also unavailable
Click to expand...
Click to collapse
Do you have Clockworkmod installed? Then make a backup and wipe data and caches, see if ir fixes.
Sent from my GT-S5660 using xda premium
I already do it but nothing happen it always says driver unsuccessful when i press *#*#526#*#*
voetbalremco said:
Do you have Clockworkmod installed? Then make a backup and wipe data and caches, see if ir fixes.
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
ROFL, he doesn't need to install CWM Recovery just to wipe all. He has stock recovery where he can do wipe data and cache or just put a code in the dialer.
Just shut off the phone and turn it on by pressing Home button + Power and you will get into stock recovery, then wipe data and cache.
i tried many ways like pressing the code in the dial pad, rebooting, wiping cache/data, reflashing but nothing happens
johnarela said:
i tried many ways like pressing the code in the dial pad, rebooting, wiping cache/data, reflashing but nothing happens
Click to expand...
Click to collapse
Try flashing another firmware
Sent from my GT-S5660 using xda premium
a new firmware would fix it why would u like 2.3.4 when the latest is 2.3.6, try to flash DXKT4 and then make a factory reset hope this helps
I would suggest, you give a shot to the new CyanogenMod 7.2
Follow this link: http://forum.xda-developers.com/showthread.php?t=1381355
I tell you, it is much more reliable than you might think. Moreover, because of the custom kernel, you can select some pre-installed CPU governor, so that your GIO become even a bit faster.
Good Luck
Hi,
First, i would like to know, you are upgrading from what firmware to what firmware? is it one package firmware or full package?
I would suggest you to flash it again, but this time, using the full package firmware. After that, don't forget to wipe data/cache, and then factory reset, all via recovery mode.
My exp about upgrading:
- from S5660DXKC3 (froyo, one package) to S5660DXKP6 (gingerbread, one package)
- unstable, lagging, wasteful of battery (bottom line is, disappointed)
Note that xkp6 2.3.6 on xda thread has been modified, on sammobile its a clean rom
Sent from my GT-S5660 using xda premium
most stable wifi rom for me is this one :
SamsungGalaxyGIO_S5660_XXKQG_2.3.4 (search for it on sammfirmware...)
i am now trying to know how to port its baseband to a flashable baseband to put in wichever rom i want, but i have no idea where to start...
0M3G4_ said:
most stable wifi rom for me is this one :
SamsungGalaxyGIO_S5660_XXKQG_2.3.4 (search for it on sammfirmware...)
i am now trying to know how to port its baseband to a flashable baseband to put in wichever rom i want, but i have no idea where to start...
Click to expand...
Click to collapse
So, does anyone know how to extract the baseband from this rom in order to use it with any other rom i'd like...??
0M3G4_ said:
So, does anyone know how to extract the baseband from this rom in order to use it with any other rom i'd like...??
Click to expand...
Click to collapse
Remove the .md5 , extract the .tar
And flash the amss file .
Sent from my GT-S5660 using xda premium
WIFI+BT+Acceloremeter
Dear Friends,
I bought an "olleh" galaxy gio and updated it to 2.3.6 from Odin.
Now the"Olleh" logo do not show and in its place samsung generic logo show on startup.
Main problem is, since update, my "auto-rotate" option rotates screen in opposite directions and when switching on wifi or BT, it just shows "Error".
No detail of error is shown.
Except that everything is fine. Calling, texting and gaming...
I used the following ROM to update:
S5660XXKTF_S5660DBTKT1_S5660XXKT4_HOME.tar.md5
Please help me with WIFI as I need it very much and could save me alot.
sohaib.ahln said:
Dear Friends,
I bought an "olleh" galaxy gio and updated it to 2.3.6 from Odin.
Now the"Olleh" logo do not show and in its place samsung generic logo show on startup.
Main problem is, since update, my "auto-rotate" option rotates screen in opposite directions and when switching on wifi or BT, it just shows "Error".
No detail of error is shown.
Except that everything is fine. Calling, texting and gaming...
I used the following ROM to update:
S5660XXKTF_S5660DBTKT1_S5660XXKT4_HOME.tar.md5
Please help me with WIFI as I need it very much and could save me alot.
Click to expand...
Click to collapse
Let me guess. You have an SHW-500 or something?!
Sent from my GT-S5660 using xda app-developers app
When flashing with ODIN:
Make sure you flash the right firmware! If you flashed any firmware, it also flashes their model's and Country's: modem, csc, kernel, system, etc...
Thus resulting wifi, data, bluetooth, and connectivity errors.
Find the right Stock ROM for your Gio model here. Then use ODIN to flash it.
Hi,
a few months ago I installed Chobits Digitalis v2. It works like a charm without bugs, except 1. When my wifi is turned off, and sometimes when wifi is on, it says my sd card is removed when it's still in when I unlock my phone. He starts scanning media and ****, and when he's finished it works normally but it happens to often and it's annoying me. Is there a solution for?
Thanks!
Well latest stock rom and then flash your rom again it is a bug from old stock rom also search before posting
Sent from my GT-S5360 using xda app-developers app
So i have to install a stock rom and then install chobits again? And i searched but i couldn't find..
Yes flash stock rom and then your rom whatever you want
Sent from my GT-S5360 using xda app-developers app
solved
I had the same problem so I flashed meruk kernel all thank to marocos and it worked like a charm
hi everyone..I have 1 weird problem with my play. Before all this mess started, I am using lupus gb 7 kernel and aurora play_v1.1.0.then I want to use lupus gb 12 480p and in order to get 640mb data partition,I flash the .62 Phoenix vendor. after that flash kernel and reinstall fresh auroraplay again.of course I did format chace,data etc...before flash the rom. everything was fine but in setting-about phone, my baseband is still showing .64 which is belong to .58 firmware.and my Bluetooth cannot scan or make it discoverable.Other thing wifi and signal have no problem..
I also try reflash the baseband only and kernel..still no luck to solve it.I believe this is not rom related cause it is the same rom before.
I hope some one can tell me how to solve this error.
Sent from my R800i using xda app-developers app