[Q] Bluescreen changing debug level - Bada Software and Hacking General

That's it!
When I try to change debug lever from low to mid or high the phone reboots but bluescreen appears. Then I have to use the unsecondfota to flash another Rc2 Low.
Any Idea??
Thanks!

Which firmware version are you using?
www.tabfirmware.com

tapan15in said:
Which firmware version are you using?
www.tabfirmware.com
Click to expand...
Click to collapse
Customized LA1

Sorry, no idea??
I'm worried because I've tried a couple of LA1s and the error is the same

Related

1% Problem

Hi
I got a big problem flashin Mary's Rom under Vista.
At the moment I got the latest PDAVIET Rom. Now when I'm flashing it stops at 1% even on my XP-Laptop ????
So I tried to flash Karmba...same problem...stuck at 1%
any ideas ????
thx
1%
snoopy-doopy said:
Hi
I got a big problem flashin Mary's Rom under Vista.
At the moment I got the latest PDAVIET Rom. Now when I'm flashing it stops at 1% even on my XP-Laptop ????
So I tried to flash Karmba...same problem...stuck at 1%
any ideas ????
thx
Click to expand...
Click to collapse
Try flashing an official ROM. Then try Mary of Karmba. Hope it works
jmermel said:
Try flashing an official ROM. Then try Mary of Karmba. Hope it works
Click to expand...
Click to collapse
A friend of mine got the same problem, and he flashed a original ROM.
The result is when he is booting, Triny stops at the splash screen, and he is not able to enter bootloader manualy
snoopy-doopy said:
A friend of mine got the same problem, and he flashed a original ROM.
The result is when he is booting, Triny stops at the splash screen, and he is not able to enter bootloader manualy
Click to expand...
Click to collapse
Is very stranger, I flash my Trinity more than 10 times peer day and nothing happen.
hellonasty said:
Is very stranger, I flash my Trinity more than 10 times peer day and nothing happen.
Click to expand...
Click to collapse
IMHO the problem is the PDAVIET ROM
Same problem
I Have the same problem, Error 270. I can´t install any ROM. Only the original !
Error 270
Maurício Eduardo Moritz said:
I Have the same problem, Error 270. I can´t install any ROM. Only the original !
Click to expand...
Click to collapse
There is a easy fix for this. After you get the error message, just start the rom update again and it will work.
jmermel said:
There is a easy fix for this. After you get the error message, just start the rom update again and it will work.
Click to expand...
Click to collapse
Hi !
But the Bootloader close and the phone start. I need change or updating someting in my device ?
Maurício Eduardo Moritz said:
Hi !
But the Bootloader close and the phone start. I need change or updating someting in my device ?
Click to expand...
Click to collapse
Yep same thing for me, the phone reboots. Trying to flash again after rebooting and Triny stops again at 1%.
PDAVIET is not the first cooked ROM in my Triny, but I think it will be the last ;-(
Try this
Try replacing the files in the update folder with this ones!
Works with me!
RomUpdater
hybridteory said:
Try replacing the files in the update folder with this ones!
Works with me!
RomUpdater
Click to expand...
Click to collapse
The same error, start ok, but in 2% stop and reboot my device. The ROMUpdateUtility says Erro 270 .
Maurício Eduardo Moritz said:
The same error, start ok, but in 2% stop and reboot my device. The ROMUpdateUtility says Erro 270 .
Click to expand...
Click to collapse
Try flashing from XP and not entering boot mode manually, try leaving the PDA on and connected to activesync.
1% problem
Maurício Eduardo Moritz said:
Hi !
But the Bootloader close and the phone start. I need change or updating someting in my device ?
Click to expand...
Click to collapse
Do not disconnect your cable once you get the error.
Try this: Copy the sspl file to your storage card and go to the file and activate.
http://forum.xda-developers.com/showthread.php?t=293632
then try to install rom
jmermel said:
Do not disconnect your cable once you get the error.
Try this: Copy the sspl file to your storage card and go to the file and activate.
http://forum.xda-developers.com/showthread.php?t=293632
then try to install rom
Click to expand...
Click to collapse
Perfect ! Problem Solved !
TKS
Now instaling Mary 3.3.5
Hi
I updated my Triny with the official ROM...and it WORKS.
So my Triny is back to live. Than I tried to put the Black&Blue Rom (under Vista) on it, but I get the same message and it stuck at 1%.
stuck again
snoopy-doopy said:
Hi
I updated my Triny with the official ROM...and it WORKS.
So my Triny is back to live. Than I tried to put the Black&Blue Rom (under Vista) on it, but I get the same message and it stuck at 1%.
Click to expand...
Click to collapse
Try going back to official ROM then upgrade to Karmba 5.0

[Q] Flashing Turbo Kernel v3.1 problems

I'm just after flashing this as i was looking to move to Turbo UI from Australia. So i flashed boot_zeus_turbo-v3.1 reboot the phone and it shows the menu. I go to the next screen and select First/Internal slot and then select "TWRP Recovery" and it shows up "TWRP Loading" but it doesn't do anything after that. It just stays showing TWRP Loading. I'm just wondering have i missed out on a step or gone wrong somewhere?
brenzie said:
I'm just after flashing this as i was looking to move to Turbo UI from Australia. So i flashed boot_zeus_turbo-v3.1 reboot the phone and it shows the menu. I go to the next screen and select First/Internal slot and then select "TWRP Recovery" and it shows up "TWRP Loading" but it doesn't do anything after that. It just stays showing TWRP Loading. I'm just wondering have i missed out on a step or gone wrong somewhere?
Click to expand...
Click to collapse
I've now also tried to boot the doomkernel and it's also stuck on the boot screen
brenzie said:
I've now also tried to boot the doomkernel and it's also stuck on the boot screen
Click to expand...
Click to collapse
did you also flashed the correct ftf file?
Because i came from the Australia rom i didn't think i neeeded to. I'll give it a try anyway. Thanks for the reply fritzbored
fritzbored said:
did you also flashed the correct ftf file?
Click to expand...
Click to collapse
Thanks for suggesting this fritzbored. I can't understand why it didn't work in the first place coming from the Australia rom but with your help i think i have it up and runninng at long last :laugh:
brenzie said:
Thanks for suggesting this fritzbored. I can't understand why it didn't work in the first place coming from the Australia rom but with your help i think i have it up and runninng at long last :laugh:
Click to expand...
Click to collapse
nice to know..

[Q] My HOX is blocked on the first home sreen

Hi,
Hello everyone,
I have a question and need your advice.
I have a HOX which starts correctly, and when it happens on the desktop, it freezes. I also hear the sound when I press the volume buttons.
In your opinion, is this a software problem? or is that the motherboard is burned out?
(It is no longer under warranty).
Thank you for your answers.
are you running stock or custom rom?
Stock Rom
have you tried doing a factory reset via the bootloader?
I have do a factory reset through recovery mode. But after this the screen stays unresponsive.
This couldn't be a problem with my motherboard?
i wouldn't say so because recovery is working are you rooted? could try re flashing the OS
ar3na2012 said:
i wouldn't say so because recovery is working are you rooted? could try re flashing the OS
Click to expand...
Click to collapse
I'm not rooted : this is stock recovery.
flash the official ruu
Same problem
So i got same problem. When i write adb devices in cmd i see my device. But im new develpoment build. When i try install recovery its says error. Most the i see waiting for device or connect device but its already connected
http://forum.xda-developers.com/showthread.php?t=2332189
Gezas said:
So i got same problem. When i write adb devices in cmd i see my device. But im new develpoment build. When i try install recovery its says error. Most the i see waiting for device or connect device but its already connected
http://forum.xda-developers.com/showthread.php?t=2332189
Click to expand...
Click to collapse
This is not the same problem. Yours is a issue of bootloop (or other).
Mine, my phone freezes on the home screen.
Flash the RUU and let me know how it goes
Sent from my badass viper x
mitch_55 said:
Hi,
Hello everyone,
I have a question and need your advice.
I have a HOX which starts correctly, and when it happens on the desktop, it freezes. I also hear the sound when I press the volume buttons.
In your opinion, is this a software problem? or is that the motherboard is burned out?
(It is no longer under warranty).
Thank you for your answers.
Click to expand...
Click to collapse
flash a RUU maybe that might help you
ll_r1d0_ll said:
flash a RUU maybe that might help you
Click to expand...
Click to collapse
Yes, yes, I will do this. (But I can't now)
mitch_55 said:
Yes, yes, I will do this. (But I can't now)
Click to expand...
Click to collapse
let us know if it worked for you

Xperia SL won't start up after installing custom ROM

So I flashed the eXistenZ BLACK Edition V1 from http://forum.xda-developers.com/showthread.php?t=2271613 and now my phone won't start up. It seems pretty much dead. It vibrates though but I get no activity on the display. Help?
I think You have downgraded Your phone thus leading to brick. Try rebooting in fastboot mode and installing stock firmware ftf using using flashtool.
Coradelaide said:
So I flashed the eXistenZ BLACK Edition V1 from http://forum.xda-developers.com/showthread.php?t=2271613 and now my phone won't start up. It seems pretty much dead. It vibrates though but I get no activity on the display. Help?
Click to expand...
Click to collapse
Which way you flash this rom?unlock bootloader or locked bootloader?
Hi There!
wxl104 said:
Which way you flash this rom?unlock bootloader or locked bootloader?
Click to expand...
Click to collapse
Hi. We're the same problem.
I am a newbie of this stuff but I think my phone is Already DEAD
After I installed the "CanGalaxyS4ROM.zip" ,
And I'ts says "Complete Installing", Then I "REBOOT"
But theres nothing appears in my phone until now!
And I do anything. I pop In & Out the Battery , I recovery mode
But there's nothing happen! What should I do?
Anyone can help to fix my phone
[email protected]
Jejane016 said:
Hi. We're the same problem.
I am a newbie of this stuff but I think my phone is Already DEAD
After I installed the "CanGalaxyS4ROM.zip" ,
And I'ts says "Complete Installing", Then I "REBOOT"
But theres nothing appears in my phone until now!
And I do anything. I pop In & Out the Battery , I recovery mode
But there's nothing happen! What should I do?
Anyone can help to fix my phone
[email protected]
Click to expand...
Click to collapse
Can You provide the link to the ROM You installed? Because I don't remember Xperia S having a ROM with such a name.

Question phone is dead

hi
i have realme 8 5g (rmx3241).i flashed a corvus gsi but it comes with bootloop.so,i decided to flash stock rom.but this error comes" status brom cmd send da fail" while trying to solve that error I mistakenly format the phone , now the phone is not coming up again. I was able to solve the that error and decided to flash the firmware now it bringing up verified boot enabled. My major problem about it is the fact that the phone is not even coming up again please help
please reply
i have the same problem we need dump for this model thanks
how to?
awzx_77 said:
i have the same problem we need dump for this model thanks
Click to expand...
Click to collapse
awzx_77 said:
i have the same problem we need dump for this model thanks
Click to expand...
Click to collapse
what have to dumb
Good afternoon, after the ota software update, the display stopped working, just a black screen, but the system sounds are there. I tried to restore the official firmware via flashtool, it didn't help. Rmx3242 . The display is original, not replaceable
rentest said:
Good afternoon, after the ota software update, the display stopped working, just a black screen, but the system sounds are there. I tried to restore the official firmware via flashtool, it didn't help. Rmx3242 . The display is original, not replaceable
Click to expand...
Click to collapse
You have to flash the stock rom including the ocdt.img, I had the same problem.
Did you ever solve your problem ? I'm experiencing something similar, the phone won't boot or charge
I've got something similar. The phone turn on, barely, and immediately turns off again. Gives a tiny vibration and turns off.
Only when on the charger, if it's not on the charger, no boot whatsoever.

Categories

Resources