Related
I've tried using multiple ruu .exe files to run, and keep getting the cannot connect error. I have tried running the ruu file when the phone is unlocked, when the phone is in hboot usb, fastboot usb, and recovery. when i run the ruu and the phone is connected in the htc sync mode, the computer will recognize the phone until i execute the ruu. the computer then disconnects from the phone. I have tried un-installing htc sync and running the ruu without any progress. I have special drivers for the rooted phone that i got off of unrevoked's website.
i am running baseband 2.15.00.11.19, and downloaded the ruu corresponding to this version.
i have clockwork mod recovery version 2.5.0.7 and it will not update to any later version.
I've already flashed for the s-on, and i am currently s-on.
HELP?!
Thanks!
Follow this: http://forum.xda-developers.com/showthread.php?t=780141
I did that and the phone scanned the image file and came up with a menu that says
Main version is older, update failed, would you like to reboot etc.
mdholt21 said:
I did that and the phone scanned the image file and came up with a menu that says
Main version is older, update failed, would you like to reboot etc.
Click to expand...
Click to collapse
That means the rom you are trying to flash is older than the current one. You need to get the 3.70 stock rom. Look towards the end of that thread, there are links to the newest 3.70 rom.
mdholt21 said:
I've tried using multiple ruu .exe files to run, and keep getting the cannot connect error. I have tried running the ruu file when the phone is unlocked, when the phone is in hboot usb, fastboot usb, and recovery. when i run the ruu and the phone is connected in the htc sync mode, the computer will recognize the phone until i execute the ruu. the computer then disconnects from the phone. I have tried un-installing htc sync and running the ruu without any progress. I have special drivers for the rooted phone that i got off of unrevoked's website.
i am running baseband 2.15.00.11.19, and downloaded the ruu corresponding to this version.
i have clockwork mod recovery version 2.5.0.7 and it will not update to any later version.
I've already flashed for the s-on, and i am currently s-on.
HELP?!
Thanks!
Click to expand...
Click to collapse
I have the exact same problem, trying unroot so I can install the Sprint/HTC update to Gingerbread. It doesn't look like anyone got back to you, please post if you've found out the problem. Best.
Hello all,
I am having difficulty unrooting my Evo...I rooted for wi-fi tether.
I already have S-ON.
I have PC36IMG.zip on my microsd card.
For some reason when I go into the bootloader (power&volume DOWN) it will not recognize PC36IMG.zip...a quick message pops up saying "no image"
What am I doing wrong?
PS: I am using ClockworkMOD 2.5
Please help.
mdholt21 said:
I've tried using multiple ruu .exe files to run, and keep getting the cannot connect error. I have tried running the ruu file when the phone is unlocked, when the phone is in hboot usb, fastboot usb, and recovery. when i run the ruu and the phone is connected in the htc sync mode, the computer will recognize the phone until i execute the ruu. the computer then disconnects from the phone. I have tried un-installing htc sync and running the ruu without any progress. I have special drivers for the rooted phone that i got off of unrevoked's website.
i am running baseband 2.15.00.11.19, and downloaded the ruu corresponding to this version.
i have clockwork mod recovery version 2.5.0.7 and it will not update to any later version.
I've already flashed for the s-on, and i am currently s-on.
HELP?!
Thanks!
Click to expand...
Click to collapse
http://noobgui.de/wiki/index.php?title=Unrooting I did this yesterday after trying all weekend,when you rename the file,if you're using windows 7,don't rename it ".zip" because windows adds a .zip also,it'll become .zip.zip,so just use PC36IMG...and another thing,use the RUU in the link dated 12/15/10,let me know if it worked
Hello!
I have a question.
Currently I have the phone Rooted and a custom Rom is installed. Now you have my phone for repair. I would like the phone back in the original condition (ie without root privileges and ClockworkMod menu) to bring.
I had then the original image, which I did for the root time, have re-played.
But unfortunately I get the menu ClockworkMod not go away.
The menu is still available.
Next try:
After I had been playing the original image, and I had started the cell phone was offered by T-Mobile is an update.
But unfortunately this update is not installed.
It aborts with an error message.
Now I have read that I should just flash the original RUU, Complete new. So I went to shipped rom on the side and I have the appropriate RUU for my phone charged. (RUU with the Tmobile UK).
But this I do not get installed.
The flash process is interrupted after a few minutes with the error 140 (wrong bootloader version).
Now my question:
How do I bekome out there, I have on my phone without the original T-Mobile software ClockworkMod, or do I uninstall ClockworkMod?)
Did any of you an idea?
Thank you!
Greeting Hollux
P.S.: Sorry for my bad English.....
Everything you need to know about putting your wildfire to original condition is in this post:
http://forum.xda-developers.com/showthread.php?t=1160251
Enjoy
dragdusan said:
Everything you need to know about putting your wildfire to original condition is in this post:
http://forum.xda-developers.com/showthread.php?t=1160251
Enjoy
Click to expand...
Click to collapse
Hello!
Thank you for the link, but my Handy is not S-off!
I'm at HBoot 0.80 and I have the Problem, that I can not flash the original RUU for my Wildfire....
I become an Error 140 Code (Bootloader error)...
Greets Hollux
what is your language?
is your phone branded?
you have breaked your recovery?
Maybe you have installed the bootloader driver from Unrevocked
Is yes,download and install htc syn from its official site and after the installation,unistall ONLY htc sync,not the drivers
my phone is unbranded and i used this
http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
it will update your HBOOT to 1.01.00001 so you need s-off to flash recovery and custom rom
kylon said:
what is your language?
is your phone branded?
you have breaked your recovery?
Maybe you have installed the bootloader driver from Unrevocked
Is yes,download and install htc syn from its official site and after the installation,unistall ONLY htc sync,not the drivers
my phone is unbranded and i used this
http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
it will update your HBOOT to 1.01.00001 so you need s-off to flash recovery and custom rom
Click to expand...
Click to collapse
Hello!
I have my phone with Rooted Unrevoked3.
Then a Custom Rom installed. (DK ROM).
Original is the phone branded by T-Mobile Germany. It was originally Froyo still on the phone.
HTC Sync I have installed and then uninstalled so I only have the drivers on my computer.
For flash process:
I've taken on shipped-rom RUU following:
RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed
If I'm in HBOOT USB plug mode, the mobile is an Android Phone - Android detected bootloader interface.
However, so after the start of the RUU, the phone is not detected!
If I'm in the fast boot mode, the USB phone as a USB device is Android - My HTC detected.
Even after you start the RUU detected the phone and I can start the flash process.
However, it comes out after a minute the error 140 (bootloader error).
If I install the image, which I then made by the original ROMs, will start after the one offered on Air update.
This, however, can not even install.
The flash process will start, but after a short time I see a picture in the phone with an Android males and a triangle. Then I am back in ClockworkMod menu ....
As I've written, I only want to install my phone with the original RUU from T-Mobile Germany and the menu should disappear ClockworkMod ...
Did any of you an idea?
What happens if I flash a non T-Mobile RUU ....?
I can try to flash another RUU and then later, my T-Mobile?
Please Answer, thank you
Greeting Hollux
You will have to downgrade MISC Partition, to allow "Downgrading" your ROM. (DK Custom ROM is based on 2.22.405.1, and you are trying to flash 1.10.114).
The Guide for AlphaRev X to Downgrade HBoot from 1.01.0002 to 1.01.0001 follows this same procedure, but, its for the WWE 2.22.405.1 ROM only.
But, you can follow this procedure, since you are on HBoot 0.80x
http://forum.xda-developers.com/showthread.php?t=905003
Obviously, the command version numbers will change in your case, and, you will need the TMO Rom.zip from that RUU.
NB - Disclaimer - It should work, but, it's a sensitive process, and I am not responsible for bricks.
ok Ive read Eveywhere regarding my problem so Im after some help.
Currently have rooted Unbranded DHD Eng S-OFF + Custom Rom.
Need to send in for repair so need to stock it.
Ive tried to flash RUU_Ace_Gingerbread_S_HTC_WWE_2.50.405.2_Radio_12.54.60.25_26.09.04.11_M2_release_199042_signed
but keeps sticking on the "Sending" Screen with HTC on phone.
Ive also tried to flash
RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155891_signed
but same as above.
When I originally rooted etc, I backed up my "Stock" Rom and I have restored that to the phone.
Questions are this.
If I install the OTA Update, will this return my phone to Stock ?
Why is the RUU not flashing.
Any help would be greatly received..
Regards
Shad.
You do really need to use an RUU to make sure that everything is completely stock. Are you sure that your computer is set up properly? Android SDK and all installed? If you have a desktop use the USB ports on the back as they are connected directly to the motherboard. The front ones are connected with a cable and are more prone to errors.
Try to factory reset the phone (through the settings menu) and then try to install the RUU again. Make sure USB debugging is on and Fast Boot is turned off.
Heres a guide just for reference.
1: Install 1.32.405.6 RUU
2: Use Visionary+ R14 to temproot, then permroot
3: Reboot
4: Use Jkoljo's Easy Radio Tool to set S-On and set the CID to the default HTC__001 (Unless your phone came carrier branded in which case the CID will be different)
5: Reboot
6: Reflash the RUU
7: Update to the latest software normally through software updates.
EDIT: An OTA update will not reset your phone back to stock. It will merely install a new ROM (or change the current one slightly) and maybe a new radio. It will leave it S-Off and everything.
So if I do
4: Use Jkoljo's Easy Radio Tool to set S-On and set the CID to the default HTC__001 (Unless your phone came carrier branded in which case the CID will be different)
That will take ENG S-OFF back to SHP S-ON ?
Also, will the RUU get rid of Clockwork ?
The Easy radio tool will take it back to Radio S-On
The RUU will get rid of the custom ROM, custom radio (if you have one), clockwork and put Eng S-On.
Well Fastboot is off. USB Debugging is on.
Factory Reset and still Not getting past the Sending screen....
Getting Annoyed now lol.
Any way to install via SD Card ?
Yes, the PD98IMG method.
Run the RUU until you get to the "Start Upgrade" type screen.
Don't start the upgrade.
Search your computer for rom.zip "it was extracted from the RUU"
Copy rom.zip to your SDCard.
Rename rom.zip to PD98IMG.zip
Reboot into Bootloader
Follow prompts.
ok SD Card Method works. YEY
Now SHP S-OFF also.
Thanks for the help !
i dont know exactly whats happened here, but i've tried to get my WFS sorted with a different rom than the carriers bloated version.
what i've done is updated hboot to 1.08.0099 and unlocked the boot loader sucessfully (hboot has *** UNLOCKED *** across the top; i used the HTCDEV.com process).
i believe i've got permanent root too.
when i attempt to flash CWM (via PG76IMG.zip), it appears to flash ok, but if i reboot the phone and try to access recovery, it just gets stuck on a white HTC screen.
i've redownloaded the CWM file to see if it's a corrupt download, but still the same problem.
CWM isnt a big issue, although it is nice to have.
however i also am unable to flash another rom either via the PG76IMG.zip SD method, or RUU.
i beleive i've done everything right, and i'm not entirely new to unlocking/rooting devices; only did my HTC Desire last week so the general process is still new in my head.
If your rooted install rom manager and flash recovery from there.
I had problems installing cwm from sd, so used the tool from here http://forum.xda-developers.com/showthread.php?t=1431969
previously was this one mediafire.com/?b0bsb4ms4lo714b
just plug the usb in sync and folow the instructions
HELP, I've bricked my phone.
I'll try to be as brief as possible.
I had android 5.0.1 (4.16.401.10). unlocked bootloader, installed TWRP, rooted.
a few months later today, my phone had an OTA update notification (4.16.401.13), tried to do it, failed and it kept sending me to TWRP.
Googled it, people said I should restore the stock recovery, I did, tried to install the OTA again. phone got stuck on splash screen.
From there I have been online for hours trying to fix this but nothing. (there has been many flashing attempts, some fail some success) so the phone is pretty much a mess now.
My question is, what's the easiest way (if there is) to just restore the phone to stock firmware? I don't care if it's going to be rooted or not, I don't care if It's going to be wiped, I just need it to work.
Currently I have (relocked) bootloader, S-On
Thanks.
Same problem here, Got this update yesterday and stuck at the splash screen.
rooted, S-on, stock recovery
tried everything from changing recovery, FUU, RUU, nothing worked
Fortunately, I have full NAND backup months ago ( old,but better than nothing), restore it, update the new update and everything looks ok so far.
I suspect its related to the xposed relared problem as the old backup its not installed.
AHOHA said:
Fortunately, I have full NAND backup months ago ( old,but better than nothing), restore it, update the new update and everything looks ok so far.
Click to expand...
Click to collapse
Sorry if this is a noob question, but how can I do that? is there somewhere where I can download backups and restore them on my phone? And if so, will I need anything like an S-Off or something?
Because I've tried everything else I think, I tried RUU (both from PC or from bootloader, and with both Unlocked and Relocked bootloader) and nothing seems to work.
Hi there, got the same problem just dont have nan backup so i'm stucked.
Phone is rooted, unlocked, s-on
cid: VODAP001
mid: 0P6B10000
got latest twrp.
Tried to flash 2 (diferent date builds) roms acording to my cid, NO LUCK,
tried ruu - no luck
read hundrets of pages and found only one thing that I need is S-OFF, but how can I do s-off when my phone doesnt boot up?
pls help
mizaras said:
Hi there, got the same problem just dont have nan backup so i'm stucked.
Phone is rooted, unlocked, s-on
cid: VODAP001
mid: 0P6B10000
got latest twrp.
Tried to flash 2 (diferent date builds) roms acording to my cid, NO LUCK,
tried ruu - no luck
read hundrets of pages and found only one thing that I need is S-OFF, but how can I do s-off when my phone doesnt boot up?
pls help
Click to expand...
Click to collapse
I finally got mine to work today!!
What worked with me is this:
I got the RUU Zip file for my CID, renamed it to 0P6BIMG.zip , and copied it to the root of my SD Card (using an adapter or using TWRP to mount it)
then I flashed the stock recovery for my phone, then RELOCK your bootloader (fastboot oem lock)
Onve you've done all that just put the SD card in your phone and boot it in bootloader mode (Vol Down + Power) and it should detect the 0P6BIMG.zip file automatically and ask you if you want to update it.
P.S: I have S-On and it worked.
I hope this helps.