Hello!
I have a question.
Currently I have the phone Rooted and a custom Rom is installed. Now you have my phone for repair. I would like the phone back in the original condition (ie without root privileges and ClockworkMod menu) to bring.
I had then the original image, which I did for the root time, have re-played.
But unfortunately I get the menu ClockworkMod not go away.
The menu is still available.
Next try:
After I had been playing the original image, and I had started the cell phone was offered by T-Mobile is an update.
But unfortunately this update is not installed.
It aborts with an error message.
Now I have read that I should just flash the original RUU, Complete new. So I went to shipped rom on the side and I have the appropriate RUU for my phone charged. (RUU with the Tmobile UK).
But this I do not get installed.
The flash process is interrupted after a few minutes with the error 140 (wrong bootloader version).
Now my question:
How do I bekome out there, I have on my phone without the original T-Mobile software ClockworkMod, or do I uninstall ClockworkMod?)
Did any of you an idea?
Thank you!
Greeting Hollux
P.S.: Sorry for my bad English.....
Everything you need to know about putting your wildfire to original condition is in this post:
http://forum.xda-developers.com/showthread.php?t=1160251
Enjoy
dragdusan said:
Everything you need to know about putting your wildfire to original condition is in this post:
http://forum.xda-developers.com/showthread.php?t=1160251
Enjoy
Click to expand...
Click to collapse
Hello!
Thank you for the link, but my Handy is not S-off!
I'm at HBoot 0.80 and I have the Problem, that I can not flash the original RUU for my Wildfire....
I become an Error 140 Code (Bootloader error)...
Greets Hollux
what is your language?
is your phone branded?
you have breaked your recovery?
Maybe you have installed the bootloader driver from Unrevocked
Is yes,download and install htc syn from its official site and after the installation,unistall ONLY htc sync,not the drivers
my phone is unbranded and i used this
http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
it will update your HBOOT to 1.01.00001 so you need s-off to flash recovery and custom rom
kylon said:
what is your language?
is your phone branded?
you have breaked your recovery?
Maybe you have installed the bootloader driver from Unrevocked
Is yes,download and install htc syn from its official site and after the installation,unistall ONLY htc sync,not the drivers
my phone is unbranded and i used this
http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
it will update your HBOOT to 1.01.00001 so you need s-off to flash recovery and custom rom
Click to expand...
Click to collapse
Hello!
I have my phone with Rooted Unrevoked3.
Then a Custom Rom installed. (DK ROM).
Original is the phone branded by T-Mobile Germany. It was originally Froyo still on the phone.
HTC Sync I have installed and then uninstalled so I only have the drivers on my computer.
For flash process:
I've taken on shipped-rom RUU following:
RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed
If I'm in HBOOT USB plug mode, the mobile is an Android Phone - Android detected bootloader interface.
However, so after the start of the RUU, the phone is not detected!
If I'm in the fast boot mode, the USB phone as a USB device is Android - My HTC detected.
Even after you start the RUU detected the phone and I can start the flash process.
However, it comes out after a minute the error 140 (bootloader error).
If I install the image, which I then made by the original ROMs, will start after the one offered on Air update.
This, however, can not even install.
The flash process will start, but after a short time I see a picture in the phone with an Android males and a triangle. Then I am back in ClockworkMod menu ....
As I've written, I only want to install my phone with the original RUU from T-Mobile Germany and the menu should disappear ClockworkMod ...
Did any of you an idea?
What happens if I flash a non T-Mobile RUU ....?
I can try to flash another RUU and then later, my T-Mobile?
Please Answer, thank you
Greeting Hollux
You will have to downgrade MISC Partition, to allow "Downgrading" your ROM. (DK Custom ROM is based on 2.22.405.1, and you are trying to flash 1.10.114).
The Guide for AlphaRev X to Downgrade HBoot from 1.01.0002 to 1.01.0001 follows this same procedure, but, its for the WWE 2.22.405.1 ROM only.
But, you can follow this procedure, since you are on HBoot 0.80x
http://forum.xda-developers.com/showthread.php?t=905003
Obviously, the command version numbers will change in your case, and, you will need the TMO Rom.zip from that RUU.
NB - Disclaimer - It should work, but, it's a sensitive process, and I am not responsible for bricks.
Related
Hi, everyone.
Got a Desire 2.1 update-1 branded by Orange ES. Hboot is 0.83. Dunno if it's SLCD or OLED, does it matter anyway?
Used unrevoked to successfully root and installed a custom recovery (unrevoked standard). Right after this the phone wouldn't go past the HTC logo but I could still get recovery screen. I tried a recovery but it didn't work either. From there I tried installing RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.exe (which is the one I want to upgrade from to stock Froyo2.2) but I got a problem in the middle of the installation ( installer says I needed to use the proper file for my phone). Then I used the recovery screen to install a custom ROM, AuraxTSense Froyo and that worked (have it on right now) but from this ROM the RUU WWE installer doesn't work either.
Any suggestions?
You'll need a gold card to use the stock RUU file - otherwise your phone doesn't pass the CID check because it's branded...
driveboy said:
Hi, everyone.
Got a Desire 2.1 update-1 branded by Orange ES. Hboot is 0.83. Dunno if it's SLCD or OLED, does it matter anyway?
Used unrevoked to successfully root and installed a custom recovery (unrevoked standard). Right after this the phone wouldn't go past the HTC logo but I could still get recovery screen. I tried a recovery but it didn't work either. From there I tried installing RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.exe (which is the one I want to upgrade from to stock Froyo2.2) but I got a problem in the middle of the installation ( installer says I needed to use the proper file for my phone). Then I used the recovery screen to install a custom ROM, AuraxTSense Froyo and that worked (have it on right now) but from this ROM the RUU WWE installer doesn't work either.
Any suggestions?
Click to expand...
Click to collapse
The Error code the installer gives me is "131" if that helps. On the phone it shows "CID error, cannot continue". Any ideas what does this mean? Help? Please?
Read my last post...
EddyOS said:
...otherwise your phone doesn't pass the CID check because it's branded...
Click to expand...
Click to collapse
can i flash my =ROOTED- Desire using stock RUU WWE? i already have a gold card...
If you want, it'll remove root though
EddyOS said:
If you want, it'll remove root though
Click to expand...
Click to collapse
now i know.. after flashing to stock RUU WWE, can i still use the unrevoke technique you taught me?
i did flash my phone using stock RUU WWE Europe (as far as i can remember) and thinking to flash WWE Asia... i cant get 3G/GPRS/MMS settings in my carrier.. im thinking if flashing WWE Asia ROM could solve the problem...
Quite possibly yes, and yes you can re-root with unrEVOked once done
thanks again EddyOS ill flash right away
Ok, so now I did a goldcard and the process seems to go a bit further but it stops. It says "Error 104, wrong hboot version - please install the correct version for your mobile phone". Any answers?
to pass the CID check, try this: htcpedia.com/forum/showthread.php?t=2934
driveboy said:
Ok, so now I did a goldcard and the process seems to go a bit further but it stops. It says "Error 104, wrong hboot version - please install the correct version for your mobile phone". Any answers?
Click to expand...
Click to collapse
That now means the HBOOT version you have is newer than the one in the ROM you're trying to flash...What ROM are you trying to flash?
EDIT: If it's still the one in your OP then chances are you'll need the stock 2.10.405.2 RUU to get the generic ROM on the handset. You can get it by clicking on the version on my signature
Hi
I've downloaded an HTC Europe 1.15 RRU that I used before and worked.
Now, however, it wont flash. I just get to the "waiting for bootloader" and then a "connection error". I tried rebooting into bootloader but then the RRU just counts upto 100 and then tells me there is a connection error.
The difference between now and last time is that I've updated my bootloader to Alpha-Rev bootloader and Clockwork Mod Recovery is installed. The phone is rooted and S-OFF as well.
I'm trying to restore the phone to factory condition in preparation for a return to HTC for repair.
I guess I need to resintall some bootloader and recovery mod?? or is that in the RUU?
Any ideas/advice?
Android version 2.2
Baseband 32.47.00.32U_5.10.05.23
Kernel 2.6.32.15-gf5a401c
Build 2.29.405.2 CL263770 release-keys
Software: DJ Droid v1.8 (but also tried latest MoDaco, Pinky, CM6 and LeeDroid)
Browser: WebKit 3.1
HBOOT 0.93.0001
BRAVO PVT3 SHIP S-OFF
MICROP-051d
TOUCH PANEL-SYNW0101
Clockwork Recovery v2.5.0.7
Why do you want to put the FIRST ever RUU back onto your device? Just download the latest RUU (2.29.405.2) by clicking on my signature. This is assuming your phone in unbranded from the start, if not you'll need to get the RUU for your operator
Er, because I said ...
"I'm trying to restore the phone to factory condition in preparation for a return to HTC for repair"
Factory condition means ANY ROM that was meant for the unit - you don't need to go back to the first!!! So long as you're on an x.xx.405.x ROM you'll be fine!!! LMAO!!!
If you just flash the 2.29.405.2 RUU then you're back to stock so the factory will accept it
bloody hell.
saved me a ****ty weekend there pal.
nice1
cheers
will do this tonight and report back.
My HBOOT is 0.93.001 (flashed using alpha-rev clockword mod install utility). Some older RUUs refuse to load (waiting for bootloader and a reboot to bootloader whilst the RRU is still running - doesnt fix the problem). Appears to be waiting for a special signature from the bootloader. Is your link (RRU) likely to work do youo know ??
If you're currently S-OFF, which I assume you are, then get this file instead:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.zip
It's the same RUU but in ZIP form. Once downloaded remove everything from the name except PB99IMG (so the file is effectively called PB99IMG.zip) and copy it to the root of your SD card. Then boot into HBOOT and it will read the ZIP and ask you to continue. Say yes and once done reboot and you'll be back to stock. Then just remove the ZIP from the SD card and away you go!
Word of advice: I was S-OFF and using the N1Table and the first time I ran this it failed on the System partition and got stuck on the white HTC screen. I left it an hour, ran the PB99IMG again and it completed so if you are on anything other than the stock table I'd go back to that first using the file from AlphaRev before running the ZIP
Either way you should be fine
Yeah S-OFF.
I'm okay with the PB99 - used that when creating gold card and downgrading.
The N1Table stuf is new to me. I'll google that now.
Thanks for the tip and link.
Cheers pal.
**EDIT:
Okay, so N1table is the partition table for sram/nvram chips.
I have not knowingly modified these, but in any event will grab
the stock HTC table just in case. I can only assume the hangup
is generated because the partition table is hardcoded in the RRU
rather than being read in by the RRU - or something like that.
Anyway, thanks once again pal.
[Q] The phone was purchased on the UK Orange network although no branding on the phone (orange square logo and orange applications). The phone was locked to the Orange network and the settings SLIGHTLY different than the unbranded phone my bro has. Will I need to get hold of the Orange RRU before sending to HTC for repair (as in will the IMEI number be registered to Orange or something)?
If it had the Orange ROM on it then you will need that before sending it back...now, an Orange RUU has never surfaced BUT I might know someone getting one today so if I hear anything I'll post back on here.
If you needed a gold card to flash the stock RUU then you will need the Orange RUU
With regards to S-OFF, unless you downloaded and flashed a new table you will still be on the stock Desire one
I used alpha-rev' s-off utility (cant recall the link and didnt save it) but unsure whether the table has been modified. I'll just download the HTC one. Simples.
DAMM. I thought I may need the Orange RUU. Yes, the stock RRU wouldnt install I recall; required a gold card and a bootloader downgrade as I remember. ****!
I've been searching for Orange RUU for months to no avail.
As I said, hold out a day or so as I think someone might be getting it from Orange
Leave it with me...
Acknowledged
My gracious thanks in advance.
Good luck!
Eddy if you get a stock Orange RUU you will be god . Hope you get it.
Sent from my HTC Desire using XDA App
It won't be me but apparently someone is getting an Orange techie to debrand his phone and he's getting the RUU in case he needs to go back to stock...as soon as I hear something I'll update
ste1164 said:
Eddy if you get a stock Orange RUU you will be god . Hope you get it.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
+1 for Eddy being God
EddyOS said:
It won't be me but apparently someone is getting an Orange techie to debrand his phone and he's getting the RUU in case he needs to go back to stock...as soon as I hear something I'll update
Click to expand...
Click to collapse
Hang on; dya mean its possible to create an RUU or backup of a branded Orange phone - as indeed I had before I rooted et.al. ? Oh no, could I have created one - surely not ?
EddyOS said:
If you're currently S-OFF, which I assume you are, then get this file instead:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.zip
It's the same RUU but in ZIP form. Once downloaded remove everything from the name except PB99IMG (so the file is effectively called PB99IMG.zip) and copy it to the root of your SD card. Then boot into HBOOT and it will read the ZIP and ask you to continue. Say yes and once done reboot and you'll be back to stock. Then just remove the ZIP from the SD card and away you go!
Word of advice: I was S-OFF and using the N1Table and the first time I ran this it failed on the System partition and got stuck on the white HTC screen. I left it an hour, ran the PB99IMG again and it completed so if you are on anything other than the stock table I'd go back to that first using the file from AlphaRev before running the ZIP
Either way you should be fine
Click to expand...
Click to collapse
Nice1 Eddy. The ZIP did the trick. The RRU method didnt work but I expected that as it was looking for an original HBOOT signature.
So, back to HTC stock. Not sure whether they would accept it for repair though given that it was sold as a branded Orange handset. Can they check?
Well, I will give this a go. The reason for the repair is that I've installed god knows how many custom ROMs and:
1. wifi doesnt always work.
2. Data connection errors.
3. Random reboots.
4. 90% reboot when navigating in the car.
5. Failure to answer some incoming calls.
6. Sometimes outgoing calls carry no voice modulation (they cant hear me)
different problems depending on ROMs.
So, lets see how the stock does before I decide to send back/or not.
Thanks again Eddy.
No, the bloke at Orange is going to give the guy getting it debranded the Orange RUU so he can go back to stock if he needs to...
HTC can tell, and my still fix it and put the Orange ROM back on it, but they may also turn around and refuse to fix it due to having a different ROM to the original
You can get to stock Orange with a very complicated method. After debranding you would root the phone. Then apply the backup on my thread. You then remove the superuser.apk with adb. You then flash the two updates orange released this unroots your phone back to stock.
Sent from my HTC Desire using XDA App
Nice1 Ste, however, mine is SLCD not Amoled. The nandroid is from an Amoled handset. Wont work with mine. Nice idea tho.
Anyone have a nandroid from an Orange set??
Hi,
I was trying to root my phone with the guide that is on this forum, but then when i restarted my phone, it was stuck on the white "HTC" boot screen. Then i tried to do a "Factory Reset" in hboot and rebooted, and still stuck on the boot screen. I tried to put a PD98IMG.zip as it was prompted in hboot as "no image or wrong file", so i loaded PD98IMG.zip onto my SD card, and still not working. any suggestions ?
my phone is S-ON.
I guess your phone is branded ? If that's the case, you need to follow the tutorial for a goldcard.
Also, if your rom is 1.7x or 1.8x, you can't root it. You have to follow the downgrade tutorial 1st
Mine took 30 mins to boot once. You could try the ruu look in dev section, you just flash it from Windows, then start again. Was your she branded?
Sent from my Desire HD using XDA App
Howling Wolf said:
I guess your phone is branded ? If that's the case, you need to follow the tutorial for a goldcard.
Also, if your rom is 1.7x or 1.8x, you can't root it. You have to follow the downgrade tutorial 1st
Click to expand...
Click to collapse
<-- This
I was in the same situation, downgraded ROM and clockwork mod and did a restore and it works fine now
@Howling Wolf - I cannot get the CID for the SD card, because
in the 'adb shell' command, my command prompt says "error: device not found". But i want to know, can i still get the CID through another HTC desire phone ? and can i still update a stock rom with S-ON ? and how do i know if my phone is branded ?
I got my phone from Taiwan, a friend brought it over for me, and when i last checked it was on software version 1.37.921.1 .
@turbo_d - ill try that thnx
did you try installing the htc sync software then do adb devices
ye i did, i installed HTC sync to get the HTC drivers, but from what i noticed is that your phone needs to be "running" instead of being stuck on the white HTC boot screen or even the hboot doesnt pick up the device aswell >.<
Totoro_tw said:
ye i did, i installed HTC sync to get the HTC drivers, but from what i noticed is that your phone needs to be "running" instead of being stuck on the white HTC boot screen or even the hboot doesnt pick up the device aswell >.<
Click to expand...
Click to collapse
Try going into bootloader, and then run adb from pc..
@SAPPH1RE - i tried that but thanks for the help !
ok i acquired my CID through linux, but now its telling me
main version is older !
update fail.
any suggiestions ? my current software version of the phone is 1.37, which stock RUU should i be using ?
If you are on 1.37 you should be fine to continue with getting s-off and such. You don't need to upgrade or downgrade your ROM until you achieve s-off. And then you should upgrade to a custom ROM such as LeeDroid.
Sent from my Desire HD using XDA App
did you get it working ?
I fixed mine a few weeks back by doing a full wipe and then loading a fresh ROM
Thing is, i cant get my phone to start up, so i need to flash a stock rom, so that i can get my phone started and then do S-OFF. But it keeps telling me "Main Version is older!"
ive tried 2 roms already, 1.32 and 1.72 RUU. What could be the problem ?
thnx problem solved, the gold card wasnt done properly, so i re did everything.
thnx for the help guys !
paulcoop007 said:
I fixed mine a few weeks back by doing a full wipe and then loading a fresh ROM
Click to expand...
Click to collapse
@paulcoop007 i have same problem with you, same version with your phone and S-ON. and my phone at black screen with htc. how can i fix it. can you explain how did you fix your phone?
After reading Bortak's guide, I was still unable to fix this bootloop as I don't have a goldcard, and it seems like you need a functional Desire to create one.
The situation is:
> Desire can boot into Fastboot (Power button + back button), but attempting to enter recovery causes a boot loop (Carrier splash screen)
> Attempting to enter recovery directly (Power button + volume down) causes a boot loop
> I lost the MicroSD with this phones' recovery on it, all I have is a spare blank MicroSD
I'm wondering, is it possible to flash a new recovery off the SD card, through fastboot?
Or, can I do this through a USB connection somehow? (I currently have the latest HTC Sync installed)
Thanks for any help!
Edit: My Desire is S-ON (I swear it used to be S-OFF, but who can remember, I haven't picked this phone up for ages) and HBOOT is 0.75.0000
S-on users cant flash a custom recovery through fastboot. It can be done only via the unrevoked method. What exactly did you do to cause this? Dont you have your own RUU?
I've got similar problem, but i don't have root.
I made S-OFF with revolutionary and rovolutionary couldn't flash clockworkmod. Previously, I didn't know that I have to do root... so i wanted to do s-on to do this root. I downgraded phone to hboot 0.80 as they said on alpharev website. But now, I can't get out from fastboot. Every time, when i'm robooting, it goes to fastboot.
Please, could You help me?
Flash 2.3.3 RUU via fastboot and use revolutionary again.
Which one from those
http://forum.xda-developers.com/showthread.php?t=695667
is 2.3.3?
-----EDIT----
MatDrOiD said:
Flash 2.3.3 RUU via fastboot and use revolutionary again.
Click to expand...
Click to collapse
OK, I found it on official htc site, or sth, and it works!! Thank you very much!
Do not forget to use thanks-button.
Droidzone said:
S-on users cant flash a custom recovery through fastboot. It can be done only via the unrevoked method. What exactly did you do to cause this? Dont you have your own RUU?
Click to expand...
Click to collapse
When I got my Desire HD, I flashed Oxygen rom on this Desire and gave it to a friend. I have no idea how it got in its current state. I'm downloading the latest official RUU now.
If someone could provide some instructions on how to flash the RUU with the phone in it's current state that would be awesome
As long as you can get into fastboot not all is lost, there will be a way of flashing it was a stock rom
chongo_au said:
When I got my Desire HD, I flashed Oxygen rom on this Desire and gave it to a friend. I have no idea how it got in its current state. I'm downloading the latest official RUU now.
If someone could provide some instructions on how to flash the RUU with the phone in it's current state that would be awesome
Click to expand...
Click to collapse
Boot phone into fastboot mode, connect phone to computer and start the downloaded RUU.exe on your computer.
The RUU recognized the phone, but it refused to update due to wrong bootloader version. Looks like my RUU was not the right one, back to searching again.
If you have GSM and not a hboot with nummber 6.93.1002, the 2.3.3 RUU should work for you:
http://www.htcdev.com/process/legal_download/152
Ok I found the correct RUU (Telstra) and was able to flash everything except the radio, which failed. Attempted to retry twice but same result.
Now I have the grey HTC logo with the exclamation triangles in the corners.
Does anyone have any suggestions?
Sorry mate, but radio brick is unfixable (as far as I know).
MatDrOiD said:
If you have GSM and not a hboot with nummber 6.93.1002, the 2.3.3 RUU should work for you:
http://www.htcdev.com/process/legal_download/152
Click to expand...
Click to collapse
Thanks, that RUU flashed successfully! It said rom update complete and so on. At least now I'm making progress.
However, the rom doesn't load and I get a bootloop. I've now got the normal white HTC splashscreen appearing, then the screen flashes black, the phone vibrates 5 or 6 times, and I'm back to the splashscreen again.
I'm able to boot into bootloader (HBOOT 1.02.001 apparently) but not recovery.
I'm not familiar with adb and all that, all I can do is follow instructions, but in short, without being able to load a rom to tick the box for usb debugging, is there any way to S-OFF and or flash CWM if I can get the computer to recognise the phone (while its sitting in bootloader or fastboot mode) with the HTC Sync USB drivers or equivalent?
I'm going to say some probably unrelated words and phrases that I've read in the last days forum trawling, maybe it will jog someones memory:
> Fastboot commands
> Revolutionary hboot drivers
> USB brick
I know its probably time to lay the old Desire to rest, but I'd love to squeeze some more use out of it, I loved that phone.
Greatly appreciate the help
You did not get any errors when flashing RUU? Okay, cool. Check if you still have an ext-partition on your SD card. Maybe this let the romboot loop.
With revolutionary you will be able to get S-OFF and root in two simple steps:
http://revolutionary.io
But read the documentary site very carefully before doing anything!
Hi i'm in the same situation (desire branded how boot loop update with RUU 2.3.3 and boot loop again)
had you fixed your desire ?
Xims said:
Hi i'm in the same situation (desire branded how boot loop update with RUU 2.3.3 and boot loop again)
had you fixed your desire ?
Click to expand...
Click to collapse
Please read the thread. The solution is in there!
ok i had try revolutionary but it never find the device ( as on hboot or fastboot)
i have the htc fastboot driver so i don't see how i can user revolutionary
If you use Android Flasher while connected to the PC you can flash a recovery in fastboot mode. Either the latest Clockwork or 4EXT Recovery will make you able to flash a Desire(d) rom again
Hi to use android flasher i had to be S-off or woth the RUU of 2.3.3 i'm back S-on and i haven't find a way to go S-off from fastboot or hboot ...
Hi guys,
Hoping someone can help, have bricked my Australian Optus stock One X. I have tried to follow all threads related to loading stock or custom roms from fastboot and am unable to. I still have CWM recovery 5.8.2.7 touch installed.
I had previously rooted it and installed Android Revolution HD 5.1.0 and seemed to be fine but was unstable and would crash and reboot in certain apps. In trying to revert back to stock I stupidly formatted the SD card, DUMB ASS!
I have downloaded stock rom 1.29.401.7-DUO, all-in-one rootkit, and the ARHD ROM and have tried to either:
1) flash ARHD with bootloader still unlocked, doesn't work
2) follow reflashing stock process ie flash stock recovery, relock bootloader, then flash stock ROM, and am getting stuck on just reflashing the stock recovery. When I try to open stock recovery it takes me to a black screen with a red ! in a triangle, this is with the bootloader relocked.
If anyone is able to help an enthusiast noob like me I'd be very appreciative and would also be more than willing to donate for the trouble.
MAKE SURE you have exactly the right RUU for your phone, whatever the rom was on you were using, ie, 1.26, 1.28, 1.29, you need the same version of RUU, i discovered the problem trying to flash RUUs and after 2 days finally got the correct one, thats when i realised, unlike on other phones, you cant downgrade the One X and when recovering it seems to prefer the one that matches what you were using.
Also make sure youre cid is supported in that RUU, ie, HTC 001, TMOB 054, etc etc, mine can only accept 401 roms, so they must match exactly, until we can get S-Off this problem will remain, dont worry about recovery, so the guide on in case of disaster, you cant go wrong with it, relock your bootloader and get your RUU installed, from their update it to your latest ics version and then if you must reflash your cwm and root it.
Thanks for the info, graemeg. After downloading an RUU that was .exe file, I felt I was getting closer, as it was an AU Optus RUU. But it turns out that my current version is 1.28.980.10 and the RUU version was 1.26.980.3 and so yes I met with the non-downgrading issue.
It seems that there is not currently a stock 1.28.980.10 RUU at the moment, so might be using this as an ornament for much longer than I would have hoped/thought. Bummer.
agentorange82 said:
Thanks for the info, graemeg. After downloading an RUU that was .exe file, I felt I was getting closer, as it was an AU Optus RUU. But it turns out that my current version is 1.28.980.10 and the RUU version was 1.26.980.3 and so yes I met with the non-downgrading issue.
It seems that there is not currently a stock 1.28.980.10 RUU at the moment, so might be using this as an ornament for much longer than I would have hoped/thought. Bummer.
Click to expand...
Click to collapse
You can get 1.28.980.10 from htcdev downloads. I would link but I'm a new user, just filter by One X, Optus, and it's there.
Thanks again for the help. I have seen those files on htcdev website, but don't know how to use them
I don't know how to load a RUU that is not a .exe file...if anyone is able to assist, again, I would really appreciate it and will donate once up and running again.
Edit: I just wanted to add that I have tried to follow the thread that explains how to load/flash recovery and boot images via fastboot in command prompt, and have not been able to. So I don't think I'm a complete dumb ass, but do need someone with the knowledge and patience to guide me through it. Please!
First thing first, do you have the right RUU with you ?
If not, maybe this is the one for you : http://hoxroms.serveftp.com/RUU_END...Radio_1.1204.103.14_release_258004_signed.exe
second: do you have fastboot directory set up on your pc ? and htc usb driver too ?
Just starting the download now, I think that could be the RUU I've been looking for. Yes I have the drivers and fastboot directory. Will give this RUU a go and let you know, thanks for the quick reply, ckpv5!
Most important before you run the RUU, you need to:
1) have a stock recovery flashed to you your device first (I believe you already have one)
2) relock the bootloader - fastboot oem lock
3) run RUU, it should work.
THANK YOU!
ckpv5, thank you for the link to the updated RUU. Phone is functioning again, stock. Donation coming your way. Thanks for all your help. agentorange82.