[Q] Unable to load ROM - HTC One X

Hi guys,
Hoping someone can help, have bricked my Australian Optus stock One X. I have tried to follow all threads related to loading stock or custom roms from fastboot and am unable to. I still have CWM recovery 5.8.2.7 touch installed.
I had previously rooted it and installed Android Revolution HD 5.1.0 and seemed to be fine but was unstable and would crash and reboot in certain apps. In trying to revert back to stock I stupidly formatted the SD card, DUMB ASS!
I have downloaded stock rom 1.29.401.7-DUO, all-in-one rootkit, and the ARHD ROM and have tried to either:
1) flash ARHD with bootloader still unlocked, doesn't work
2) follow reflashing stock process ie flash stock recovery, relock bootloader, then flash stock ROM, and am getting stuck on just reflashing the stock recovery. When I try to open stock recovery it takes me to a black screen with a red ! in a triangle, this is with the bootloader relocked.
If anyone is able to help an enthusiast noob like me I'd be very appreciative and would also be more than willing to donate for the trouble.

MAKE SURE you have exactly the right RUU for your phone, whatever the rom was on you were using, ie, 1.26, 1.28, 1.29, you need the same version of RUU, i discovered the problem trying to flash RUUs and after 2 days finally got the correct one, thats when i realised, unlike on other phones, you cant downgrade the One X and when recovering it seems to prefer the one that matches what you were using.
Also make sure youre cid is supported in that RUU, ie, HTC 001, TMOB 054, etc etc, mine can only accept 401 roms, so they must match exactly, until we can get S-Off this problem will remain, dont worry about recovery, so the guide on in case of disaster, you cant go wrong with it, relock your bootloader and get your RUU installed, from their update it to your latest ics version and then if you must reflash your cwm and root it.

Thanks for the info, graemeg. After downloading an RUU that was .exe file, I felt I was getting closer, as it was an AU Optus RUU. But it turns out that my current version is 1.28.980.10 and the RUU version was 1.26.980.3 and so yes I met with the non-downgrading issue.
It seems that there is not currently a stock 1.28.980.10 RUU at the moment, so might be using this as an ornament for much longer than I would have hoped/thought. Bummer.

agentorange82 said:
Thanks for the info, graemeg. After downloading an RUU that was .exe file, I felt I was getting closer, as it was an AU Optus RUU. But it turns out that my current version is 1.28.980.10 and the RUU version was 1.26.980.3 and so yes I met with the non-downgrading issue.
It seems that there is not currently a stock 1.28.980.10 RUU at the moment, so might be using this as an ornament for much longer than I would have hoped/thought. Bummer.
Click to expand...
Click to collapse
You can get 1.28.980.10 from htcdev downloads. I would link but I'm a new user, just filter by One X, Optus, and it's there.

Thanks again for the help. I have seen those files on htcdev website, but don't know how to use them
I don't know how to load a RUU that is not a .exe file...if anyone is able to assist, again, I would really appreciate it and will donate once up and running again.
Edit: I just wanted to add that I have tried to follow the thread that explains how to load/flash recovery and boot images via fastboot in command prompt, and have not been able to. So I don't think I'm a complete dumb ass, but do need someone with the knowledge and patience to guide me through it. Please!

First thing first, do you have the right RUU with you ?
If not, maybe this is the one for you : http://hoxroms.serveftp.com/RUU_END...Radio_1.1204.103.14_release_258004_signed.exe
second: do you have fastboot directory set up on your pc ? and htc usb driver too ?

Just starting the download now, I think that could be the RUU I've been looking for. Yes I have the drivers and fastboot directory. Will give this RUU a go and let you know, thanks for the quick reply, ckpv5!

Most important before you run the RUU, you need to:
1) have a stock recovery flashed to you your device first (I believe you already have one)
2) relock the bootloader - fastboot oem lock
3) run RUU, it should work.

THANK YOU!
ckpv5, thank you for the link to the updated RUU. Phone is functioning again, stock. Donation coming your way. Thanks for all your help. agentorange82.

Related

Need Help Getting Phone to Boot!

Hey Guys,
I'm reaching the point of frustration now. To try and cut a long story short, I had the Android Revolution 6 ROM on my rooted/unlocked HTC One X, and decided to update it to Android Revolution 13. I followed all the instructions, went to boot it, and it just sat on the HTC logo for an hour at which point I knew something went wrong. I repeated the steps, including wiping data using super wipe, without success either. I then decided to just select the "Factory reset" option on the boot menu, but this has also failed to boot after 30 minutes. I can also no longer boot into recovery. I've tried reloading CWM and other recovery ROM's onto the phone, but the phone resets as soon as they load.
At this point, I just want to get some form of OS on my phone. My phone is Unlocked, S-ON and has a CID of OPTUS001. I don't know if Factory reset will work if the phone is unlocked. It's all very time consuming as you normally don't know if the boot process has locked until you've waited ~20 minutes. I can't find my original ROM from when I bought the phone either, so I assume I need to obtain another one from somewhere, but I don't have any idea about CID compatibility, etc, and I'm finding this all very confusing and frustrating. All help is much appreciated. I have a feeling I need to replace my boot.img with a stock boot.img, but once again, where do I get that?
Thanks
the phone doesn't boot because you don't have the latest firmware installed, you need HBOOT 1.31 but you can't install it cause your CID is not compatible with it, you sjould go back to ICS and wait...
Did you load new firmware 1.31? This firmware is not compatible with Your CID... Did You read carefully this thread — http://forum.xda-developers.com/showthread.php?t=1924003
Sent from HOX with ARHD 13
You forgot that you need to update the firmware to 1.31.
You can also just install ARHD 9.7.2. Ensure you have the latest CWM 5.8.4.0
faatboot flash recovery recovery.img
and then flash the boot image:
fastboot flash boot boot.img
fastboot erase cache
And then copy the ROM on using recovery mount USB and flash it.
Thanks for all the help guys. I managed to get a stock recovery.img back onto the phone, and by re-locking the phone I was able to use the latest Optus RUU from htcruu.com.
So at least I've now got a working phone again.
Moving onto why ARHD didn't work, I had no idea about the firmware 1.31 compatibility requirement. I thought all HTC One X's were created equal. I didn't know about this CID nonsense. Can someone explain how I find out when my phone's CID becomes compatible, or perhaps a way to change my CID or some other means of getting Jelly Bean onto my phone. Apologies for being a noob.
wardrop said:
Thanks for all the help guys. I managed to get a stock recovery.img back onto the phone, and by re-locking the phone I was able to use the latest Optus RUU from htcruu.com.
So at least I've now got a working phone again.
Moving onto why ARHD didn't work, I had no idea about the firmware 1.31 compatibility requirement. I thought all HTC One X's were created equal. I didn't know about this CID nonsense. Can someone explain how I find out when my phone's CID becomes compatible, or perhaps a way to change my CID or some other means of getting Jelly Bean onto my phone. Apologies for being a noob.
Click to expand...
Click to collapse
without S-OFF no chance to change CID. Regarding CID compatible - http://forum.xda-developers.com/showthread.php?t=1924003
wardrop said:
Thanks for all the help guys. I managed to get a stock recovery.img back onto the phone, and by re-locking the phone I was able to use the latest Optus RUU from htcruu.com.
So at least I've now got a working phone again.
Moving onto why ARHD didn't work, I had no idea about the firmware 1.31 compatibility requirement. I thought all HTC One X's were created equal. I didn't know about this CID nonsense. Can someone explain how I find out when my phone's CID becomes compatible, or perhaps a way to change my CID or some other means of getting Jelly Bean onto my phone. Apologies for being a noob.
Click to expand...
Click to collapse
now you're on stock right? when you'll get the OTA update then you can install JB custom roms...
matt95 said:
now you're on stock right? when you'll get the OTA update then you can install JB custom roms...
Click to expand...
Click to collapse
Yeah, but I'm going to put on ARHD 9.7 I think.
Optus not compatible with JB yet

[Q] Back to full stock with s-on

Hi guys,
need your help.
I have Europe M9, with S-ON.
Rooted it, and installed TWRP, installed custom rom.
How to revert it to full stock? I have sold the phone, and now buyer wants it back to way it were.
Thanks.
Thankfully it's pretty easy; just download your carrier specific RUU to restore to full stock. It's a Windows executable that completely wipes & return your phone to factory state.
I have bought it in Telenor Serbia it was on 1.32.401.15. Should I use any Europe RUU, or do I need to find one exact to match my carrier, and-or my firmware version?
sorry if being noob, but cannot understand this HTC's nonsense (s-on/s-off, cid, hboot...) thats the exact reason why I have sold it. to complicated for me...
I just want it up and running, and trust me, I will never EVER buy another HTC again.
acasmc said:
I have bought it in Telenor Serbia it was on 1.32.401.15. Should I use any Europe RUU, or do I need to find one exact to match my carrier, and-or my firmware version?
sorry if being noob, but cannot understand this HTC's nonsense (s-on/s-off, cid, hboot...) thats the exact reason why I have sold it. to complicated for me...
I just want it up and running, and trust me, I will never EVER buy another HTC again.
Click to expand...
Click to collapse
Since there are two different versions of your firmware and I don't know which one is the correct one for you I would suggest you to use this firmware and downgrade to 1.32.401.8. This works because the aboot has not been updated until now. The process itself is very easy:
Download the RUU
Rename it to 0PJAIMG.zip (that's a zero at the beginning not an O)
Copy the file on an external SD card that is formatted to fat32 and not bigger than 32 gb
Boot into download mode
Follow the instructions that are shown on your M9's screen
Congratulation you are now back on stock rom and firmware
You have to use either this way or the fastboot flashing method since there are no RUU executables for the european version.
Btw: No one here forced you to buy the M9. Since it's simply a matter of taste it's up to you which device you choose. I personally prefer HTC's user friendliness in regard to bootloader unlock and rooting (compare it for example with Samsung's Knox system). But this is not the right place for that debate.
Edit: Since my phone is S-OFF I'm not completely sure but you might have to relock your bootloader or step 5 might no work properly.
I have the same problem, i wanna know how to restore it to full stock, i need it just in case something happens to phone and i need to use my waranty. I'm also on telenor serbia. Any detailed instructions would be much appreciated. And one more thing, will i be able to recevie OTA updates even though its rooted ?
Djomla87 said:
And one more thing, will i be able to recevie OTA updates even though its rooted ?
Click to expand...
Click to collapse
Root by itself doesn't prevent OTAs, but changes to the recovery do. As far as I know, acquiring root (for this device) always involves flashing a custom recovery. So OTA aren't possible until the stock recovery is restored.
Do I need to have sd card, or can I flash it from pc using adb?
I have already tried this method, and fastboot gave me an error 22? Maybe I got wrong firmware. Will try again, thanks.
computerslayer said:
Root by itself doesn't prevent OTAs, but changes to the recovery do. As far as I know, acquiring root (for this device) always involves flashing a custom recovery. So OTA aren't possible until the stock recovery is restored.
Click to expand...
Click to collapse
Ok so how do i restore stock recovery?
You flash stock recovery zip that can be found on xda.
acasmc said:
You flash stock recovery zip that can be found on xda.
Click to expand...
Click to collapse
What version ?
As far as I know, there is only one. Search in forums.
This is what I get when try to flash from adb.
used the file from post on first page,
try this RUU: http://androidruu.com/getdownload.p...6.02.50306G_2_F_release_429340_signed_2_4.exe
I'm also interested if it's possible to go back to stock from a S-ON with RUU_HIMA_UHL_L50_SENSE70_HTC_Europe_1.32.401.17_Radio_01.01_U11440261_56.02.50306G_2_F_release_429340_signed_2_4.exe
Good to know basis
dondavis007 said:
I'm also interested if it's possible to go back to stock from a S-ON with RUU_HIMA_UHL_L50_SENSE70_HTC_Europe_1.32.401.17_Radio_01.01_U11440261_56.02.50306G_2_F_release_429340_signed_2_4.exe
Click to expand...
Click to collapse
If you are S-ON you can only flash a RUU for your carrier and device. If that's the correct RUU for your phone, it will do it.
iElvis said:
If you are S-ON you can only flash a RUU for your carrier and device. If that's the correct RUU for your phone, it will do it.
Click to expand...
Click to collapse
The question is where can you find correct RUU from specific carrier
So if you're an European open you can't really flash without s off?
Skickat från min HTC One M9 via Tapatalk
Djomla87 said:
The question is where can you find correct RUU from specific carrier
Click to expand...
Click to collapse
There is a RUU list in the General forum. Not all configurations have RUUs, unfortunately, as it has always been with HTC.
http://forum.xda-developers.com/one-m9/general/htc-one-m9-dump-t3060545
By far the easiest way for the inexperienced is to use the windows exe version linked to a few posts ago .
If you're on 1.32.401.15 then simply flash 1.32.401.17 using the exe version. Simply run windows program and follow on screen prompts .
Main limitation if you're S on is it will only allow upgrade that is to go to higher number as described .
I think there is also a 1.32.401.8 exe but that's an earlier version so if you tried to use that and you were on higher version such as 1.32.401.15 then it wouldn't allow unless you had obtained S off.
Sent from my HTC One M9 using XDA Free mobile app
One more thing, i received lates OTA update, but it wont instal because recovery isnt stock. I found stock signed, when i flash it will the phone factory reset or not ?

Returning to stock issues.

I'm currently running Android Revolution HD on my new M9, unlocked, s-off also.
Found out that I have the battery is faulty, so I need to return it to stock, and get it back the shop for a replacement.
However, I stupidly didn't make a back up of my stock rom.
The CID of my phone is O2___01
I've downloaded the stock rom from this site, and flashed it using the RUU command. However when it flashes, then tells me to reboot, it still has Android Revolution HD on it.
I've spent a few hours browsing the forum, and still I've come to no avail.
Any help would be well appreciated!
Webbage said:
I'm currently running Android Revolution HD on my new M9, unlocked, s-off also.
Found out that I have the battery is faulty, so I need to return it to stock, and get it back the shop for a replacement.
However, I stupidly didn't make a back up of my stock rom.
The CID of my phone is O2___01
I've downloaded the stock rom from this site, and flashed it using the RUU command. However when it flashes, then tells me to reboot, it still has Android Revolution HD on it.
I've spent a few hours browsing the forum, and still I've come to no avail.
Any help would be well appreciated!
Click to expand...
Click to collapse
You don't provide much information so it's hard to help. So let's start at the bginning: What firmare version are you using? (It's stated in Download Mode in the line with "OS" at the beginning.)
You tried to flash a RUU? Which one? Have there been any error outputs? If yes, which ones? Since you're S-OFF flashing a RUU should not be a problem at all so these outputs are very important if you want any help.
I tried to flash 1.40.206.8 -> 2.10.206.2 from this page
Code:
http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Also I followed this,
Code:
http://forum.xda-developers.com/one-m9/development/firmware-t3068243
downloaded the correct RUU zip, tried to flash, got the error code telling me I need to immediately flash again which I did. Rebooted, and it just set up Android Revolution HD again.-
My firmware currently is 2.10.206.2
Im sure it's something stupid I missing out?
Webbage said:
I tried to flash 1.40.206.8 -> 2.10.206.2 from this page
Code:
http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Also I followed this,
Code:
http://forum.xda-developers.com/one-m9/development/firmware-t3068243
downloaded the correct RUU zip, tried to flash, got the error code telling me I need to immediately flash again which I did. Rebooted, and it just set up Android Revolution HD again.-
My firmware currently is 2.10.206.2
Im sure it's something stupid I missing out?
Click to expand...
Click to collapse
As far as I know Sneakyghost doesn't provide any RUUs. Those are only firmware packages that do not contain a rom. So it's no miracle that you're still booting ARHD.
You can download O2 RUUs from here, here or here. Any of the X.XX.206.X files will work since you are S-OFF. Do you have a SD card that is not bigger than 32gb? If yes, format it to fat32, copy one O2 RUU to its root directory and rename that file to "0PJAIMG.zip". If you then boot to Download Mode you will be asked to push the Volume Up button and the RUU will start flashing. If it reboots to system instead of rebooting to Download Mode you will have to power off your phone and boot to Download Mode manually. The RUU will continue then. At the end you will be asked to push the power button so that your phone gets shut down. If you now start your phone you will be back on a stock system.
Be aware that there is no RUU for your current firmware. Since you're S-OFF that doesn't matter but your phone will be downgraded at the end.
Ahh no wonder! haha
Going to try this shortly, so will let you know how I get on!
After its flashed, I'll be good to lock again and go s-on? Then return to the shop?
Webbage said:
Ahh no wonder! haha
Going to try this shortly, so will let you know how I get on!
After its flashed, I'll be good to lock again and go s-on? Then return to the shop?
Click to expand...
Click to collapse
Relock only after you successfully tested that your device is booting normaly. After that you theoretically could re-S-ON. (But I would never do that because there is always a risk of hardbricking your phone if you re-S-ON and there is anything still modified that you didn't notice. For safety reasons S-OFF should always be considered as a oneway.)
Edit: I'm not completely sure but I actually doubt that they will check whether your phone was S-OFFed or not. If I think about the people who are working at the O2 or vodafone shops in my city I would say they do not even know what a bootloader is...
Agreed, use the s-off command to change back to "LOCKED" and leave it s-off. Too much of a risk otherwise.
If in the unlikely event they see it, you can play dumb, because a few rare people have gotten s-off phones from the factory and it doesn't prove you did anything.
Flippy498 said:
Relock only after you successfully tested that your device is booting normaly. After that you theoretically could re-S-ON. (But I would never do that because there is always a risk of hardbricking your phone if you re-S-ON and there is anything still modified that you didn't notice. For safety reasons S-OFF should always be considered as a oneway.)
Edit: I'm not completely sure but I actually doubt that they will check whether your phone was S-OFFed or not. If I think about the people who are working at the O2 or vodafone shops in my city I would say they do not even know what a bootloader is...
Click to expand...
Click to collapse
All sorted mate! Thanks a lot for your help!
What recovery am I best restoring on it?
Webbage said:
All sorted mate! Thanks a lot for your help!
What recovery am I best restoring on it?
Click to expand...
Click to collapse
Didn't the RUU flash the corresponding stock recovery?
Flippy498 said:
Didn't the RUU flash the corresponding stock recovery?
Click to expand...
Click to collapse
My bad, I didn't check.
All sorted now, thanks again bud!

Can't get my HTC One M9 back to stock [HELP NEEDED]

RELOCKED
S-ON
OS : 2.10.401.1
CID: HTC_0031
Hello Guys,
I have a major problem getting my HTC M9 back to stock!
My first problem began when i was trying to update my ViberRom from 5.1.1 to Marschmallow, the problem that i had was that my recovery could not update. But when i updated it to 3.0.0 or something like that, i couldn't boot my ViberRom (because that was still 5.1.1).
So in order to fix that problem i thought that i could return my HTC M9 back to stock with an RUU, however since i have the EU/International version (2.10.401.1), i could not use the .exe version HTC provided themselves on their own website. After looking on the internet i found an RUU which corresponded with my version (2.10.401.1) it was a ZIP file so i needed to either flash it or put it on my SD card.
After a while a new problem arose, I have no S-OFF, but after reading several threads i did not matter as long as i had the right RUU version or higher (as well as matching CID, MID). Several articles and threads also mentioned that when i wanted to flash an RUU with S-On i would need to re-lock my bootloader and so i did.
With a locked bootloader i tried flashing the RUU, but everytime when i do it my FASTBOOT.EXE crashes!
Sorry if i am being a NOOB right now, but i really don't know what to do now, My Rom won't boot and i cant acces my recovery. I already treid Unlocking my bootloader again, and after completing every step, including choosing the option to unlock it on the phone itself using the volume buttons, it still states: RELOCKED
I really hope you guys can help me with my problem!!
Kind regards,
Roan
(sorry for anything that may be not clear, English is not my native language)
Roanvdw said:
RELOCKED
S-ON
OS : 2.10.401.1
CID: HTC_0031
Hello Guys,
I have a major problem getting my HTC M9 back to stock!
My first problem began when i was trying to update my ViberRom from 5.1.1 to Marschmallow, the problem that i had was that my recovery could not update. But when i updated it to 3.0.0 or something like that, i couldn't boot my ViberRom (because that was still 5.1.1).
So in order to fix that problem i thought that i could return my HTC M9 back to stock with an RUU, however since i have the EU/International version (2.10.401.1), i could not use the .exe version HTC provided themselves on their own website. After looking on the internet i found an RUU which corresponded with my version (2.10.401.1) it was a ZIP file so i needed to either flash it or put it on my SD card.
After a while a new problem arose, I have no S-OFF, but after reading several threads i did not matter as long as i had the right RUU version or higher (as well as matching CID, MID). Several articles and threads also mentioned that when i wanted to flash an RUU with S-On i would need to re-lock my bootloader and so i did.
With a locked bootloader i tried flashing the RUU, but everytime when i do it my FASTBOOT.EXE crashes!
Sorry if i am being a NOOB right now, but i really don't know what to do now, My Rom won't boot and i cant acces my recovery. I already treid Unlocking my bootloader again, and after completing every step, including choosing the option to unlock it on the phone itself using the volume buttons, it still states: RELOCKED
I really hope you guys can help me with my problem!!
Kind regards,
Roan
(sorry for anything that may be not clear, English is not my native language)
Click to expand...
Click to collapse
Fastboot crashes because it can't handle files over 2 GB. There is a different fastboot you need to use called htc_fastboot. Search the forum for a link. Or I'll find one if i can. Commands are exactly the same as fastboot, just add "htc_" in front of fastboot.
Here you go:
https://www.androidfilehost.com/?fid=95916177934550031
jollywhitefoot said:
Fastboot crashes because it can't handle files over 2 GB. There is a different fastboot you need to use called htc_fastboot. Search the forum for a link. Or I'll find one if i can. Commands are exactly the same as fastboot, just add "htc_" in front of fastboot.
Here you go:
Click to expand...
Click to collapse
IT WORKED, very grateful man, very weird that i could not find this problem in the forum though, maybe i just suck at searching.
i have the same problem, i cant even find RUU.zip file, if you could help me with that, would really appreciate it

HELP need serious advice here.

Hi,good afternoon,my friend brought me his HTC one m9,because i have experience with these things, i have flashed many devices of different brands but this is my first HTC device.
Well the problem is this:
He unlocked the botloader,installed TWRP ,super SU.zip (via twrp) and a custom rom with s-on,after that he lost signal,the phone does not have imei and baseband is uknown.
I've searched trough xda ,before posting this,so i came across with a thread that said that the phone can recover signal flashing a custom rom and a kernel,did that with no success. And also i've read that returning the bootloader to locked status,will allow me to flash a RUU file in order to get back to stock.
So, i relocked the bootloader,using CMD, but now the phone just boots into bootloader ,i can enter download mode aswell,but its stucked there.
Phone is recognized by windows,via fastboot.
So,the phone status is bootloader relocked,and s-on.
i´ve tried flashing the RUU via sdcard on download mode and gives me error,also i tried using fastboot commands and the result is the same,i can not flash the RUU file.
Any suggestions are very apreciated. Thanks fot your time.
kalel29 said:
Hi,good afternoon,my friend brought me his HTC one m9,because i have experience with these things, i have flashed many devices of different brands but this is my first HTC device.
Well the problem is this:
He unlocked the botloader,installed TWRP ,super SU.zip (via twrp) and a custom rom with s-on,after that he lost signal,the phone does not have imei and baseband is uknown.
I've searched trough xda ,before posting this,so i came across with a thread that said that the phone can recover signal flashing a custom rom and a kernel,did that with no success. And also i've read that returning the bootloader to locked status,will allow me to flash a RUU file in order to get back to stock.
So, i relocked the bootloader,using CMD, but now the phone just boots into bootloader ,i can enter download mode aswell,but its stucked there.
Phone is recognized by windows,via fastboot.
So,the phone status is bootloader relocked,and s-on.
i´ve tried flashing the RUU via sdcard on download mode and gives me error,also i tried using fastboot commands and the result is the same,i can not flash the RUU file.
Any suggestions are very apreciated. Thanks fot your time.
Click to expand...
Click to collapse
For download mode SD card method:
Make sure you're using an external SD card, not internal storage.
Make sure SD card is formatted properly.
Make sure file is named 100% correctly and is meant for that specific carrier /model.
No reason it shouldn't work.
Sent from my HTC6545LVW using Tapatalk
kalel29 said:
i´ve tried flashing the RUU via sdcard on download mode and gives me error,also i tried using fastboot commands and the result is the same,i can not flash the RUU file.
Click to expand...
Click to collapse
Are you sure you flashed the correct one? Some basic information about firmware versions, RUUs and instructions how to flash them can be found in my sticky thread in the general section.
Concerning the reception problem: It's important whether you tried to use a sense-based custom rom or a non-sense-based one. The mono-kernel only works with non-sense roms like CM or Candysix. Moreover the reception problem has been covered in this thread some days ago. If you want to use a sense-based rom the re-flash boot.img "trick" might be working for you, too.
Sidenote: There is absolutely no need for flashing SuperSU if you are going to erase the system and to flash a custom com. It doesn't harm the device but it's a waste of time.
Flippy498 said:
Are you sure you flashed the correct one? Some basic information about firmware versions, RUUs and instructions how to flash them can be found in my sticky thread in the general section.
Concerning the reception problem: It's important whether you tried to use a sense-based custom rom or a non-sense-based one. The mono-kernel only works with non-sense roms like CM or Candysix. Moreover the reception problem has been covered in this thread some days ago. If you want to use a sense-based rom the re-flash boot.img "trick" might be working for you, too.
Sidenote: There is absolutely no need for flashing SuperSU if you are going to erase the system and to flash a custom com. It doesn't harm the device but it's a waste of time.
Click to expand...
Click to collapse
Yes I flashed the one for my operator. Can I flash another RUU?
About your links, I'll check them when I get back from work. Thanks.
Is your phone branded by your carrier? (Can be checked by looking at the SKU of the currently installed firmware.) If not then it's the wrong RUU. Is the RUU made for the same firmware version as the one that is currently installed on the phone or does the RUU even have a newer version? If not then it's the wrong RUU.
Flippy498 said:
Is your phone branded by your carrier? (Can be checked by looking at the SKU of the currently installed firmware.) If not then it's the wrong RUU. Is the RUU made for the same firmware version as the one that is currently installed on the phone or does the RUU even have a newer version? If not then it's the wrong RUU.
Click to expand...
Click to collapse
Hi again, the phone is giving me this error :
im still lost ,hope this helps to point me in the right direction.
Code:
D:\Francisco\Desktop\HTC\fastboot_adb\fastboot_adb>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himaulatt
(bootloader) version: 1.0
(bootloader) imei:
(bootloader) version-main: 3.44.600.1
(bootloader) boot-mode: RUU
(bootloader) version-baseband: 01.01_U11440801_97.04.60111G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA11000
(bootloader) cid: HTC__332
all:
finished. total time: 0.033s
Thanks
You still didn't mention the name of the RUU you wanted to flash. However a quick search for your SKU (Telcel Mexico) showed me that there is no RUU available you could use. The only one I could find is linked in my thread and that one is too old for your phone since you can't downgrade the firmware with S-ON. You either need to re-unlock the bootloader, flash a sense-based custom rom and buy the sunshine app or try to find someone who has a java card. Both solutions would set the phone S-OFF so that you would be able to use that old RUU. Alternatively you could contact Llabtoofer (a link can be found in my thread and in my google sheet). He has a RUU service with RUUs that are not available publicly*. Neither the sunshine app, nor a java nor the RUU service are for free. Llabtoofer and the sunshine app cost nearly the same. I don't know how much you need to pay for java card services. Be aware that even if it's OK if the phone is running a custom right now** and you don't want to use any of these solutions that you still lack a way back to stock if a new OTA (like the one for Android N) gets distributed and therefore you won't be able to install it.
If you use the old RUU all OTAs that got installed on your phone will need to get re-installed.
However you choose you should read the tab "make your own backup" of my sheet after the phone got recovered and all available OTAs got installed but before anyone starts flashing anything, again. This way you will learn how to create a backup that will help you out if you face such a situation, again. Instructions how to restore such a backup correctly can be found in the tab "twrp backups".You'll always need to create a new backup when a new OTA got installed on your phone and you want to re-root it. Besides if you're willing you could upload the backup (and any upcoming ones) and share it(/them) with the xda community by posting the download link(s) in my thread.
* He wants to know the hboot version of your phone of you request his help. Since the One M9 has no hboot but an aboot and that one never got updated you can enter version 1.0.0.0000. That's the current aboot version.
** Possible solutions for recovering the reception can be found in my first post in this thread. There is no need to flash a RUU since your IMEI and your baseband are still intact but the boot.img of the rom you tried to use was/is incompatible.
Flippy498 said:
You still didn't mention the name of the RUU you wanted to flash. However a quick search for your SKU (Telcel Mexico) showed me that there is no RUU available you could use. The only one I could find is linked in my thread and that one is too old for your phone since you can't downgrade the firmware with S-ON. You either need to re-unlock the bootloader, flash a sense-based custom rom and buy the sunshine app or try to find someone who has a java card. Both solutions would set the phone S-OFF so that you would be able to use that old RUU. Alternatively you could contact Llabtoofer (a link can be found in my thread and in my google sheet). He has a RUU service with RUUs that are not available publicly*. Neither the sunshine app, nor a java nor the RUU service are for free. Llabtoofer and the sunshine app cost nearly the same. I don't know how much you need to pay for java card services. Be aware that even if it's OK if the phone is running a custom right now** and you don't want to use any of these solutions that you still lack a way back to stock if a new OTA (like the one for Android N) gets distributed and therefore you won't be able to install it.
If you use the old RUU all OTAs that got installed on your phone will need to get re-installed.
However you choose you should read the tab "make your own backup" of my sheet after the phone got recovered and all available OTAs got installed but before anyone starts flashing anything, again. This way you will learn how to create a backup that will help you out if you face such a situation, again. Instructions how to restore such a backup correctly can be found in the tab "twrp backups".You'll always need to create a new backup when a new OTA got installed on your phone and you want to re-root it. Besides if you're willing you could upload the backup (and any upcoming ones) and share it(/them) with the xda community by posting the download link(s) in my thread.
* He wants to know the hboot version of your phone of you request his help. Since the One M9 has no hboot but an aboot and that one never got updated you can enter version 1.0.0.0000. That's the current aboot version.
** Possible solutions for recovering the reception can be found in my first post in this thread. There is no need to flash a RUU since your IMEI and your baseband are still intact but the boot.img of the rom you tried to use was/is incompatible.
Click to expand...
Click to collapse
Ok,thanks, and yes,the RUU I was trying to flash I the telcel one.
I'm going to tell my fiend that he needs to pay in order to get his phone working.
Thanks again for everything. Have a nice day.
Update
I managed to unlock the bootloader again, the phone boots, but it has no signal.
Do I need sunshine and then flash any ruu?
Or what can I do? BTW my friend agreed to pay for sunshine.
kalel29 said:
Update
I managed to unlock the bootloader again, the phone boots, but it has no signal.
Do I need sunshine and then flash any ruu?
Or what can I do? BTW my friend agreed to pay for sunshine.
Click to expand...
Click to collapse
Is it a sense-based rom? If yes, did you reflash the stock boot.img? Or is it a non-sense-based rom? In that case the mono kernel which is linked above needs to be flashed for recovering the reception.
If you're currently using a sense-based rom (which is not an HTC 10 port - e.g. Viper one m9 4.3) then you can install the sunshine app and start it. The app will explain the rest of the procedure. Just google "sunshine s-off" and you'll find it. After your phone got S-OFF you simply need to try reflashing the RUU.
Flippy498 said:
Is it a sense-based rom? If yes, did you reflash the stock boot.img? Or is it a non-sense-based rom? In that case the mono kernel which is linked above needs to be flashed for recovering the reception.
If you're currently using a sense-based rom (which is not an HTC 10 port - e.g. Viper one m9 4.3) then you can install the sunshine app and start it. The app will explain the rest of the procedure. Just google "sunshine s-off" and you'll find it. After your phone got S-OFF you simply need to try reflashing the RUU.
Click to expand...
Click to collapse
The phone has the ICE rom,Twrp and superSU,I think it's a sense-based rom, sorry I can't give you more info, as I said I'm new in flashing HTC, but I'm learning thanks to you.
ICE is sense-based. It's using HTCs own launcher and framework which is called Sense. Examples for non-sense-based roms are CM, CandySix or other AOSP roms.
Depending on the version of ICE that got flashed on the phone you might need to revert back to an older version*. The newest ICE rom is based on an HTC 10 port and I've read several posts of users reporting that they couldn't use sunshine with an HTC 10 port.
* I don't know which version that would be. I've never used ICE so you would need to figure that out on your own.
Flippy498 said:
ICE is sense-based. It's using HTCs own launcher and framework which is called Sense. Examples for non-sense-based roms are CM, CandySix or other AOSP roms.
Depending on the version of ICE that got flashed on the phone you might need to revert back to an older version*. The newest ICE rom is based on an HTC 10 port and I've read several posts of users reporting that they couldn't use sunshine with an HTC 10 port.
* I don't know which version that would be. I've never used ICE so you would need to figure that out on your own.
Click to expand...
Click to collapse
So basically, no matter what rom I flash,sense or no sense based, I will need sunshine in order to have a working baseband?
No. Sunshine is needed for getting back to stock for installing upcoming OTAs. And in case you want to use a sense-based roms it's needed for being able to backup the stock boot.img. As explained before, you need to re-flash that one after you flashed the custom rom. The boot.img of 3.35.y (y is a placeholder for any possible number) custom roms isn't compatible with 3.x firmware if x is not equal to 35 (as in your case). At the moment your only option for not having to use sunshine would be flashing a non-sense-based rom and the kernel I linked in an earlier post. But as explained before you wouldn't be able to install upcoming updates like the one for Android N if you choose not to use sunshine.
Flippy498 said:
No. Sunshine is needed for getting back to stock for installing upcoming OTAs. And in case you want to use a sense-based roms it's needed for being able to backup the stock boot.img. As explained before, you need to re-flash that one after you flashed the custom rom. The boot.img of 3.35.y (y is a placeholder for any possible number) custom roms isn't compatible with 3.x firmware if x is not equal to 35 (as in your case). At the moment your only option for not having to use sunshine would be flashing a non-sense-based rom and the kernel I linked in an earlier post. But as explained before you wouldn't be able to install upcoming updates like the one for Android N if you choose not to use sunshine.
Click to expand...
Click to collapse
Finally i have signal again,flashed slim 6 and monokernel. Thank you so much,i've learned something new about HTC now im going to return the phone to my friend,also i explained what you told me in order to have a sense based rom.

Categories

Resources