Develop Bugs

Bricked my Galaxy Gio

Hi XDA,
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.

Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...

Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.

SuperUub said:
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
Click to expand...
Click to collapse
If not even adb detects it, i'm pretty sure you're buggered, mate.

did you try and leave the battery out for some 10 min or more?
If adb does not detect the phone after that, then it seems to be a brick for real.

Is your phone stop at the "samsung" when you turn on your phone?
If is this,it's very easy to unbrick

One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado

+
Yes this way usually works. I've tested this way.

that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.

Odin to detect
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?

I had my mainboard replaced at a service center... Probably not the news you would have liked, but I'm afraid that's your next step as well.

Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
This worked for me too, try to charge your battery in another phone if possible

bobcota said:
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
Click to expand...
Click to collapse
same problem

same problem here
voetbalremco said:
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Click to expand...
Click to collapse
i also have the same prblem here just now , i tried to flash this ROM but i forgot to wipe data/factory reset the phne and i unintentionally flashed the rom without wiping it :'( and now, dont boot at all but can still turned on and ended up just "samsung" appearing on the screen . please help :crying::crying:

I've bricked my Galaxy Gio when i flashed a custom kernel.
Hi There I also have the same problem. I installed Galaxy Ace's Kernel onto my Galaxi Gio, Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
S[B said:
[/B]uperUub;20668671]Hi XDA!
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Click to expand...
Click to collapse

Not either going to Download Mode
trackIDtracker said:
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Click to expand...
Click to collapse

[q] asking about phone brick!

When I finish restore my back up, I reboot my phone and it get brick (JUGG 5.0)!!! I cannot even press any button to turn the screen on!! Already try with different charger, battery and sim card also!! Does someone have any idea please!!

Try the long power button press. Press the power button and hold it for like 10 seconds (Maybe more, it always feels more then 10 seconds). The phone should vibrate 3 times and then you release.
If that doesn't work, then see if you can get into download mode and get Odin to recognize your phone.

I already try, I press it nearly 1 minute, but the screen doesn't turn on!

what exactly are you doing? you were making a backup in cwm, it finished and then you rebooted?

I flash a new Rom, but I don't like it. So I use Darkside Superwipe to wipe all cache and data of that Rom so that I can do the back up. After the back up process is finished,(I see everything runs well). I reboot the phone and it gets brick.

gunbreak said:
I flash a new Rom, but I don't like it. So I use Darkside Superwipe to wipe all cache and data of that Rom so that I can do the back up. After the back up process is finished,(I see everything runs well). I reboot the phone and it gets brick.
Click to expand...
Click to collapse
I am not quite understanding. You made backup, or did you restore a backup that you previously made? Anyways, If the phone wont boot try to put in in dl mode and odin it back to stock.

xcrazydx said:
I am not quite understanding. You made backup, or did you restore a backup that you previously made? Anyways, If the phone wont boot try to put in in dl mode and odin it back to stock.
Click to expand...
Click to collapse
Oh I understand u, I restore my back up. How can I put it in the mode that you say? I can't even turn the screen on can you please help me!

gunbreak said:
Oh I understand u, I restore my back up. How can I put it in the mode that you say? I can't even turn the screen on can you please help me!
Click to expand...
Click to collapse
Before you try to odin it, can you get into cwm by holding the volume up, down, and power. Release power when first samsung logo appears. stay holding vol buttons until cwm pops up. can you get into this?

xcrazydx said:
Before you try to odin it, can you get into cwm by holding the volume up, down, and power. Release power when first samsung logo appears. stay holding vol buttons until cwm pops up. can you get into this?
Click to expand...
Click to collapse
No, it doesn't work. All the buttons freeze now

You most likely are hard bricked, but you still have a slight chance to get into download mode. Not sure how you managed a brick by restoring a backup, but I'll try to help.
Ok, you are going to need the drivers for your phone. http://www.mediafire.com/file/6onrjbyd46j4lhj/T-Mobile_t989_GSII_ADB_Drivers.zip
You need odin as well, download it. http://www.mediafire.com/?u868rqz4qn0ta34
These links were provided by KonstantinKeller
Go here http://www.sammobile.com/firmware/ and make an account. I use sammobile because it contains everything in one shot. No need to get radio and crap from other places. After you make an account go to firmware section and type t989 in the search box. download the t989uvkid. ASSUMING YOU HAVE AMERICAN T989
After you have completed the download you are going to need to unzip it with 7zip to extract the tar.
Plug the USB cable into your computer, without plugging it into your phone.
Hold VOL UP + VOL DOWN while plugging in the USB cable to your phone. Stop holding buttons when the ''Warning'' appears.
Press Volume UP and start ODIN (Run as Admin on Vista and 7, just to be safe)
Click PDA and locate the MD5 file you extracted earlier.
WAIT FOR ODIN TO RECOGNIZE YOUR PHONE. THE COM PORT WILL TURN YELLOW AND HAVE A NUMBER
MAKE SURE NOTHING BUT AUTO REBOOT IS CHECKED!!!!!!!
Press 'Start' and be patient. It will take a few minutes because it is a large file.
phone will reboot automatically.
If you can't get the phone to be recognized try different usb ports or a different computer if you have another. This may not work at all, considering it sounds like you are hard bricked. Good luck!

I should download T989UVKID or T989UVKL1? I think my phone get android 2.3.6

gunbreak said:
I should download T989UVKID or T989UVKL1? I think my phone get android 2.3.6
Click to expand...
Click to collapse
it won't matter. if you want the newest grab kL1

Window told me "no driver found" after I already installed the samsung driver!

gunbreak said:
Window told me "no driver found" after I already installed the samsung driver!
Click to expand...
Click to collapse
Delete that driver setup and use kies. http://www.samsung.com/us/kies/

I think it already died, no driver found again. I try in device manager, it appears as Samsung Android ADB interface, but nothing appears on my screen it's such a hard brick....

gunbreak said:
I think it already died, no driver found again. I try in device manager, it appears as Samsung Android ADB interface, but nothing appears on my screen it's such a hard brick....
Click to expand...
Click to collapse
Just do this and see if it goes into DL mode.
Plug the USB cable into your computer, without plugging it into your phone.
Hold VOL UP + VOL DOWN while plugging in the USB cable to your phone. Stop holding buttons when the ''Warning'' appears.
If not, you have 2 options
Send to this guy for jtag repair for $50 http://mobiletechvideos.mybigcommerce.com/
OR warranty it through samsung

I should warranty it through Samsung or ask for replacement phone through Tmobile? (I have insurance in my plan). I wonder if Tmobile find out my phone is rooted and I have to pay for the replacement phone. Do you have any idea?

gunbreak said:
I should warranty it through Samsung or ask for replacement phone through Tmobile? (I have insurance in my plan). I wonder if Tmobile find out my phone is rooted and I have to pay for the replacement phone. Do you have any idea?
Click to expand...
Click to collapse
You can go to the tmobile store and tell them it wont turn on. you wont need your insurance plan, the phone carries a warranty against defects for 1 year. Just play dumb and say it wont turn on and demand a new phone.

Do u have any idea if Tmobile check the phone or not?

gunbreak said:
Do u have any idea if Tmobile check the phone or not?
Click to expand...
Click to collapse
They can't tell anything if it's hard bricked. You're fine man, Get a new one.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[Q] Hard Bricked my s5360 !! Please Help me ! please

by mistake i downloaded the rom of S5300 and flashed it on my s5360 . and have bricked the phone . when i press the power button nothing shows up. i have tried all the steps , all combinations of keys. my phone does not enter either recovery nor download mode. in short it does not boot . Pls help me

whats about ur batt charge....... Plz charge yr batt using any multi charger and try to enter DL mode........ May be its low batt problem ....
Sent from my GT-S6102 using xda premium

close this,there too many posts and threats like this

sunamit37 said:
by mistake i downloaded the rom of S5300 and flashed it on my s5360 . and have bricked the phone . when i press the power button nothing shows up. i have tried all the steps , all combinations of keys. my phone does not enter either recovery nor download mode. in short it does not boot . Pls help me
Click to expand...
Click to collapse
Bro if you have flashed the bootloader of S5300 then I'm afraid you are pretty and royally screwed! How can you make a mistake like that?
As far as I know, the only way you can fix it is to send it into Samsung service centre.
Sorry to break it to you bro.
Next time make sure you know what you are doing before playing around with firmwares, they are NOT COMPATIBLE!

sunamit37 said:
by mistake i downloaded the rom of S5300 and flashed it on my s5360 . and have bricked the phone . when i press the power button nothing shows up. i have tried all the steps , all combinations of keys. my phone does not enter either recovery nor download mode. in short it does not boot . Pls help me
Click to expand...
Click to collapse
are you sure you can't enter into download mode?? (volume down + home button + lock button)
if yes, then it's indeed hard brick bro
the only thing that you can do is send it back to the service center and make an excuse that your updating through kies was interrupted by a power black out

leodasal2 said:
are you sure you can't enter into download mode?? (volume down + home button + lock button)
if yes, then it's indeed hard brick bro
the only thing that you can do is send it back to the service center and make an excuse that your updating through kies was interrupted by a power black out
Click to expand...
Click to collapse
Buddy i always do that I got it unbricked 6 times since February
And once it got stuck at bootloops while installing creeds rom wid nexus boot animation
They said that software in phone is not from Samsung
Then I told them that I was updating it via fota and they agreed
Sorry for my good english
Check this out
http://forum.xda-developers.com/showthread.php?t=81

manoranjan2050 said:
whats about ur batt charge....... Plz charge yr batt using any multi charger and try to enter DL mode........ May be its low batt problem ....
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
i tried after recharging my battery. still nothing shows up. & if i leave the battery attached to my android phone after some time my phone heats even if its not working.

leodasal2 said:
are you sure you can't enter into download mode?? (volume down + home button + lock button)
if yes, then it's indeed hard brick bro
the only thing that you can do is send it back to the service center and make an excuse that your updating through kies was interrupted by a power black out
Click to expand...
Click to collapse
will the officials in service centre be able to figure out what i have done & which rom i have flashed in my phone and got the phone bricked

alkesh95 said:
Buddy i always do that I got it unbricked 6 times since February
And once it got stuck at bootloops while installing creeds rom wid nexus boot animation
They said that software in phone is not from Samsung
Then I told them that I was updating it via fota and they agreed
Sorry for my good english
Check this out
http://forum.xda-developers.com/showthread.php?t=81
Click to expand...
Click to collapse
soft brick and hard brick are two different things..
boot loops and stuck at samsung screen are only soft bricks
---------- Post added at 11:14 AM ---------- Previous post was at 11:09 AM ----------
sunamit37 said:
will the officials in service centre be able to figure out what i have done & which rom i have flashed in my phone and got the phone bricked
Click to expand...
Click to collapse
on the physical aspect, no
they can only figure that out if they can manage to boot it up without flashing the original firmware which i think cannot be avoided so base on that theory, they will not find out
ps: just tell them the excuse i gave on the previous comment
make sure your warranty isn't expired!!

alkesh95 said:
Buddy i always do that I got it unbricked 6 times since February
And once it got stuck at bootloops while installing creeds rom wid nexus boot animation
They said that software in phone is not from Samsung
Then I told them that I was updating it via fota and they agreed
Sorry for my good english
Check this out
http://forum.xda-developers.com/showthread.php?t=81
Click to expand...
Click to collapse
will the officials in service centre be able to figure out what i have done & which rom i have flashed in my phone and got the phone bricked. & what excuse is suitable for this situation as my phone is still in warranty

leodasal2 said:
soft brick and hard brick are two different things..
boot loops and stuck at samsung screen are only soft bricks
---------- Post added at 11:14 AM ---------- Previous post was at 11:09 AM ----------
on the physical aspect, no
they can only figure that out if they can manage to boot it up without flashing the original firmware
ps: just tell them the excuse i gave on the previous comment
make sure your warranty isn't expired!!
Click to expand...
Click to collapse
what do u mean by "make sure your warranty isn't expired!!" pls tell me ?

sunamit37 said:
what do u mean by "make sure your warranty isn't expired!!" pls tell me ?
Click to expand...
Click to collapse
check your warranty sticker!
example: my phone has this sticker inside it noting that it is an original Samsung product with a 1-year warranty (from date of purchase)
you can also check the box

sunamit37 said:
by mistake i downloaded the rom of S5300 and flashed it on my s5360 . and have bricked the phone . when i press the power button nothing shows up. i have tried all the steps , all combinations of keys. my phone does not enter either recovery nor download mode. in short it does not boot . Pls help me
Click to expand...
Click to collapse
if your phone was hard bricked, then the combination keys will not work anymore. .you can use "usb jig" to trigger your phone into odin mode. .you can buy a usb jig or a home made usb jig. .you will only need a 300k resistor and a micro usb. .search for a tutorial on "how to make your own usb jig"

that will definetely a hard brick. you've flashed wrong bootloader in your phone. in these case only samsung service center could revive your phone. you can ignore all comment and post about jig, recovery mode, combination keys, odin, bla bla bla since they won't work. save your time and just send your phone to samsung service center.

kurotsugi said:
that will definetely a hard brick. you've flashed wrong bootloader in your phone. in these case only samsung service center could revive your phone. you can ignore all comment and post about jig, recovery mode, combination keys, odin, bla bla bla since they won't work. save your time and just send your phone to samsung service center.
Click to expand...
Click to collapse
oopppssss. .sorry my bad. .i thought usb jig will work. .but you're more experienced than me (because i'm just a noob) so sunamit37 must consider your advice than mine. .thanks

kurotsugi said:
that will definetely a hard brick. you've flashed wrong bootloader in your phone. in these case only samsung service center could revive your phone. you can ignore all comment and post about jig, recovery mode, combination keys, odin, bla bla bla since they won't work. save your time and just send your phone to samsung service center.
Click to expand...
Click to collapse
what reason should i give in the service centre as my phone is in warranty period

@missingchord: I'm sorry if my post migh offend you. I didn't mean that. you're just suggesting something based on your knowledge anyway. aside OP, there's only one person here who have got hard brick on his SGY. its normal if only a few us here know how to fix a hard bricked device.
@sunamit: just say 'something goes wrong when I update my rom'. thats not a lie and not void your warranty. most service center will accept these reason.

missingchord said:
if your phone was hard bricked, then the combination keys will not work anymore. .you can use "usb jig" to trigger your phone into odin mode. .you can buy a usb jig or a home made usb jig. .you will only need a 300k resistor and a micro usb. .search for a tutorial on "how to make your own usb jig"
Click to expand...
Click to collapse
is there a readymade jig for s5360. if not can i use the jig of galaxy sII . will the method used to make the usb jig in the following video , work for my s5360
http://www.youtube.com/watch?v=xu3SchQ6zvM
in the video i dont see any resistors just a paper, pencil graphite rubbed on it to offer resistance. will it work or not . Please tell me

sunamit37 said:
is there a readymade jig for s5360. if not can i use the jig of galaxy sII . will the method used to make the usb jig in the following video , work for my s5360
in the video i dont see any resistors just a paper, pencil graphite rubbed on it to offer resistance. will it work or not . Please tell me
Click to expand...
Click to collapse
if the SII jig will not cost u too much .... there is nothing bad in giving it a try, afterall ur SGY is already hard bricked .. what worse can happen ....
give it a try if it is not a mess .

sunamit37 said:
is there a readymade jig for s5360. if not can i use the jig of galaxy sII . will the method used to make the usb jig in the following video , work for my s5360
http://www.youtube.com/watch?v=xu3SchQ6zvM
in the video i dont see any resistors just a paper, pencil graphite rubbed on it to offer resistance. will it work or not . Please tell me
Click to expand...
Click to collapse
will this model of jig work on s5360 - SAMSUNG I9100 GALAXY S2 DOWNLOAD MODE USB JIG S DONGLE RESET COUNTER II

sgw hard brick

hi all, my sgw hard brick because i wrong flash kernel, any idea to unbrick.
I had tried this method , but still cant power on.
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone.

WOW..!! You got it bro..!!
I also had a HardBrick and I'm very confused how to unbrick my SGW.
I'm looking for many thread and post about unbrick the HardBrick, but I just got same answer.
so., Solution for your problem is "Change the PDA/MainBoard"

Theres a solution on that.. just search here..

skylai82 said:
hi all, my sgw hard brick because i wrong flash kernel, any idea to unbrick.
I had tried this method , but still cant power on.
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone.
Click to expand...
Click to collapse
eza azami said:
WOW..!! You got it bro..!!
I also had a HardBrick and I'm very confused how to unbrick my SGW.
I'm looking for many thread and post about unbrick the HardBrick, but I just got same answer.
so., Solution for your problem is "Change the PDA/MainBoard"
Click to expand...
Click to collapse
hi bro, u r correct, I go samsung service center, answer is change main board. design too bad, may be main samsung factory no send out how to re-flash phone for all samsung service center.
And samsung android system without fastboot / hboot. maybe only jtagbox can help us.
sad sad... no more support samsung, I ready change to suppot miui phone xiaomi2. cheap and powerfull hardware the android system support fastboot like sony and htc.
pre-order now...

skylai82 said:
hi bro, u r correct, I go samsung service center, answer is change main board. design too bad, may be main samsung factory no send out how to re-flash phone for all samsung service center.
And samsung android system without fastboot / hboot. maybe only jtagbox can help us.
sad sad... no more support samsung, I ready change to suppot miui phone xiaomi2. cheap and powerfull hardware the android system support fastboot like sony and htc.
pre-order now...
Click to expand...
Click to collapse
http://androidforums.com/vibrant-tips-tricks/223806-guide-fixing-bricks-odin-errors.html
NO-BOOT BRICKS
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "SOFT BRICKS" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, of course for the downloading parts, obviously.
-Phone not responsive?
*Try the hard brick section right under
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.

skylai82 said:
http://androidforums.com/vibrant-tips-tricks/223806-guide-fixing-bricks-odin-errors.html
NO-BOOT BRICKS
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "SOFT BRICKS" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, of course for the downloading parts, obviously.
-Phone not responsive?
*Try the hard brick section right under
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.
Click to expand...
Click to collapse
Is this method worked with you ?

you hold the wrong button..
while you plugin the charge/usb cable, hold power button+vol down(not both up&down,only down)+home button then put again your battery..
if it still like that just go to ssc..
Sent from my GT-I8150 using Tapatalk 2

stpdkid said:
you hold the wrong button..
while you plugin the charge/usb cable, hold power button+vol down(not both up&down,only down)+home button then put again your battery..
if it still like that just go to ssc..
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
Try already.. also no working....

skylai82 said:
Try already.. also no working....
Click to expand...
Click to collapse
Send for phone repair shop, repair price RM150.00
Shop girl told me change Main board, actual no! imei number still same.

skylai82 said:
Send for phone repair shop, repair price RM150.00
Shop girl told me change Main board, actual no! imei number still same.
Click to expand...
Click to collapse
Means u got cheated with a software solution since imei no change which means same board?

egagah said:
Means u got cheated with a software solution since imei no change which means same board?
Click to expand...
Click to collapse
yes.

skylai82 said:
yes.
Click to expand...
Click to collapse
Oops what happened here ? I thought I wanted to share a solution...NVM

Very Hard Brick E975

Friends, first of all thank you very much. My E975 is a brick, the red light is fixed when I put it to load, the PC does not detect it and I'm sad about it. Rom R RRemix 5.1.1. I would like to know how to load a KDZ to revive ? I tried combinations of power and volume buttons up or down and nothing happens ... lot of thanks

I forget: No Recovery No Download Mode ?

All you can do it is throw it in to trash and buy new phone and dont install custom roms if youre noob!

Can you describe what happened to your phone ? I haven't got that kind of experience, at least I managed to custom recovery..

dfernandopm said:
Friends, first of all thank you very much. My E975 is a brick, the red light is fixed when I put it to load, the PC does not detect it and I'm sad about it. Rom R RRemix 5.1.1. I would like to know how to load a KDZ to revive ? I tried combinations of power and volume buttons up or down and nothing happens ... lot of thanks
Click to expand...
Click to collapse
bro sometimes you have to push your button hardly dont worry
Hold vol+ and down hardly Then plug datacable into your cellphone then you can flash kdz (download mode)
if it does not work..!! then try to hold just vol Up But and insert datacable

Thanks for trying to help ... When connecting the charger the LED is fixed constant .. What does that mean?

dfernandopm said:
Friends, first of all thank you very much. My E975 is a brick, the red light is fixed when I put it to load, the PC does not detect it and I'm sad about it. Rom R RRemix 5.1.1. I would like to know how to load a KDZ to revive ? I tried combinations of power and volume buttons up or down and nothing happens ... lot of thanks
Click to expand...
Click to collapse
The most probable explanation is that you're on a custom kernel and you've exhausted your battery to total zero. .
You can recharge it back by using a more powerful charger like a 2A/2000mA charger or above
(but not too much) like provided with Galaxy note 2/3/3 neo etc
dfernandopm said:
Thanks for trying to help ... When connecting the charger the LED is fixed constant .. What does that mean?
Click to expand...
Click to collapse

MasterFURQAN said:
The most probable explanation is that you're on a custom kernel and you've exhausted your battery to total zero. .
You can recharge it back by using a more powerful charger like a 2A/2000mA charger or above
(but not too much) like provided with Galaxy note 2/3/3 neo etc
Click to expand...
Click to collapse
Thanks, when it was shut off and charging the battery is the R Remix Rom 5.1.1

try this hard brick repair pack: https://mega.nz/#!64hHwATa!h04qnOp9gSS81sIuE6ULBO24j3tnexJ0Z0O68Mt1GpU
tutorial included.

Thanks man...

If nothing helps. Disassemble your phone, try to disconnect and reconnect your battery from the motherboard.

Ok malimukk