Hello xda sorry for the n00b question and I'm not sure if there was a thread about this but I tried looking but no luck, I browse xda all the time but I just registered now to hopefully find some help.
So I just used GNex TOOLKIT V5.3 and did numbers 1,2,3 then skipped to #7 and then did #8 to get yakju.
Now everything was successful and I got my apps back and my phone could still call and text. I was using my wifi the whole time pretty much so I didn't notice my data or internet on my phone was lost till later.
Did I just screw my self over? I'm on the GSM version Galaxy nexus now on 4.0.2 if that is any help.
I would start by checking your apn settings...
danger-rat said:
I would start by checking your apn settings...
Click to expand...
Click to collapse
Thanks for replying
As is Access point names? Sorry Im still kinda learning here.
Well anyways It shows Dataconnect and medianet I tried both none seem to be working, do I have to change something in one of those?
*BUMP* ? still need a little help with this :/
Are you on AT&T
Sent from my Galaxy Nexus using XDA App
cordell507 said:
Are you on AT&T
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Naw I'm actually with docomo.
slick.seal said:
Naw I'm actually with docomo.
Click to expand...
Click to collapse
go to the screen where it list all the APN's then hit menu and reset them then go to the dialer and dial *#*#4636#*#* then tap phone info then scroll to the bottom and preferred network type to WCDMA preferred then hit menu and select radio band and then select the corresponding band for your country
cordell507 said:
go to the screen where it list all the APN's then hit menu and reset them then go to the dialer and dial *#*#4636#*#* then tap phone info then scroll to the bottom and preferred network type to WCDMA preferred then hit menu and select radio band and then select the corresponding band for your country
Click to expand...
Click to collapse
hmmm do I type WCDMA even if im GSM? thanks for your input so far.
WCDMA is usually what GSM carriers use for 3G at least AT&T does its not real CDMA though
Sent from my Galaxy Nexus using XDA App
Related
When in the "secret menu" (*#*#4636*#*#) there are a bunch of options. On the Verizon galaxy nexus what would you say is the best? I am using wcdma preferred right now.
Sent from my Galaxy Nexus using XDA
I'm on GSM/CDMA auto (PRL)...
What is default?
I did not go in through testing, but downloaded a widget that if I click "4G" it takes me to "phone info" where i can select a "preferred Network Type". I am just curious what "default" is.
Thanks
@op, you should leave those options alone.
Default is the Auto PRL one.
pumaras said:
What is default?
I did not go in through testing, but downloaded a widget that if I click "4G" it takes me to "phone info" where i can select a "preferred Network Type". I am just curious what "default" is.
Thanks
Click to expand...
Click to collapse
If you want 4G, then cdma/lte (which is the default.) If you only want 3g, go cdma only
Sent from my Galaxy Nexus using xda premium
Is there a way to force LTE as the only network my phone connects to? I have the network app that worked in my EVO 4G LTE but it doesn't seem to work on my GS3
Sent from my SPH-L710 using xda app-developers app
go to settings>more settings>mobile networks>click on network mode and select Lte/cdma
also in the mobile networks click automatic connections if urs is unchecked.!
*
Rooted Evo dead.
Rooted Evo shift dead.
Rooted Galaxy s3 alive and well!
I know that setting but is it a way to put the GS3 into LTE only mode and not just LTE/CDMA
Sent from my SPH-L710 using xda app-developers app
loujennings4 said:
I know that setting but is it a way to put the GS3 into LTE only mode and not just LTE/CDMA
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
No.. Not without issues
Sent from my SPH-L710 using Tapatalk 2
My wife is with Verizon and theirs works the same way. She's always like, why won't it just stay in 4g? Different beast than WiMax (not that that wouldn't drop out like a trap door sometimes.)
loujennings4 said:
I know that setting but is it a way to put the GS3 into LTE only mode and not just LTE/CDMA
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Yes, you can do this in the hidden Data Programming menu launched from the stock TouchWiz dialer. You will need to know your MSL code:
In the Dialer enter ##DATA#
On the Data Programming screen select Edit
Enter your MSL
Tap OK
Select Others
Select HDR/1X Selection
Select "LTE Only Mode"
Tap OK
There is a major downside to this: You will no longer have voice or text service, only LTE data service (where available).
Hat tip: S4GRU.com
I can't believe this hasn't been stickied but this is how to apply the APN Settings to most ROM's that are Android 4.0+. Most ROM's have this information already baked in, some do not. I created this little tutorial not only for people that are new to this, but also for veterans who need a quick reference for the actual settings. Can we please get this Stickied?
APN Settings for MMS
1. Goto Settings
2. Under Wireless & Networks select "More..."
3. Select "Mobile networks"
4. Select "Access Point Names"
5. Press the Setting soft key
6. Select "New APN"
7. Select "Name" and enter "Verizon" and select "OK"
8. Select "APN" and enter "internet" and select "OK"
9. Select "MMSC" and enter "http://mms.vtext.com/servlets/mms" and select "OK"
10 . Press the setting softkey
11. Select "Save"
12. In the APN screen select your new "Verizon" APN
13. Finished
Yeah I'm surprised this hasn't been stickied yet. I can't tell you how many times I've seen this asked for.
+1 Mods, please make this a sticky! I'm always searching through threads to find this.
+ 2 cause it had already been + 1'd
Sent from my Incredibly Indecisive Dinc2
+3 (keep the combo going!)
+5!!!!! Screw 4
fen0m said:
+5!!!!! Screw 4
Click to expand...
Click to collapse
Noooooooooooooooooooooooooooooooo
Thanks!
Sent from my OG Droid
Yes my OG freaking Droid.
Thanks for this my man
Sent from my ADR6350 using xda premium
nitsua98 said:
+3 (keep the combo going!)
Click to expand...
Click to collapse
You tried...
fen0m said:
+5!!!!! Screw 4
Click to expand...
Click to collapse
Boooooo!
Sent from my Incredibly Indecisive Dinc2
Good stuff!
Thanks!! Im always looking for this fix!
Something else you may add to this, the method of updating towers when you can't use a keyboard. That might be handy also.
Sent from my Incredibly Indecisive Dinc2
Still trying to get this stickied, I guess the MODS have moved on to other devices and don't hang around here much anymore.....
PLZ sTiCkY !!!!!
uber information that needs to be seen =)
okay guys, I have tried doing this and it kicks me out of APN back to the settings page. Every time. I have switched to phablet mode to stock and everything in between to try and be able to enter these settings. Is there anyway possible to do this without getting into the APN?
drneely said:
okay guys, I have tried doing this and it kicks me out of APN back to the settings page. Every time. I have switched to phablet mode to stock and everything in between to try and be able to enter these settings. Is there anyway possible to do this without getting into the APN?
Click to expand...
Click to collapse
If you are looking for rom specific help you need to ask in that thread. I'm assuming you are trying pacman. I believe it has been addressed there already. But be sure you are hitting menu and save and not just backing out.
Sent from my Incredible 2 using xda app-developers app
It is for paranoid, i tried the way you suggested in that thread but even before i can get into apn settings i get kicked back to settings....
This is how it goes
1.hit menu
2.hit settings
3.click more
4.click wireless networks
5.click apn
6.get kicked back to main menu
Sent from my Incredible 2 using xda app-developers app
drneely said:
It is for paranoid, i tried the way you suggested in that thread but even before i can get into apn settings i get kicked back to settings....
This is how it goes
1.hit menu
2.hit settings
3.click more
4.click wireless networks
5.click apn
6.get kicked back to main menu
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
I believe someone mentioned a way to fix that. Something to do with clearing and rebooting maybe. Still this isn't the right thread for trouble shooting that rom. We don't want to clutter this thread with rom specific issues. Recheck that thread.
I'm on my way to work right now but it you don't find it ask in that thread and I will see if I can help later.
Sent from my Incredible 2 using xda app-developers app
drneely said:
It is for paranoid, i tried the way you suggested in that thread but even before i can get into apn settings i get kicked back to settings....
This is how it goes
1.hit menu
2.hit settings
3.click more
4.click wireless networks
5.click apn
6.get kicked back to main menu
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Goto post #526 in Paranoid/Pac thread and start there. I personally never had that problem with PA, or PAC.....but I have gone back to Psycho's Build 4 because I don't like the apps baked into PA and PAC....
I downloaded Phone Info and switched it back to LTE but it keeps on saying 3G. I'm on Rogers.
GetPatriotized said:
I downloaded Phone Info and switched it back to LTE but it keeps on saying 3G. I'm on Rogers.
Click to expand...
Click to collapse
Are you in a lte area?
Sent from my SAMSUNG-SGH-I317 using xda premium
AlonB. said:
Are you in a lte area?
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Yes.
Check basebands
Sent from my Galaxy Nexus using xda premium
Phone info basically replaces the process of using *#2263#. I'd suggest uninstalling it, and manually:
1. In dialer, *#2263#
2. LTE band preference, LTE all
3. Menu key, end
4. Again in dialer, *#2263#
5. Select automatic
6. Menu key, end
Sent from my SAMSUNG-SGH-I317 using xda premium
AlonB. said:
Phone info basically replaces the process of using *#2263#. I'd suggest uninstalling it, and manually:
1. In dialer, *#2263#
2. LTE band preference, LTE all
3. Menu key, end
4. Again in dialer, *#2263#
5. Select automatic
6. Menu key, end
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
That totally worked! Thanks a million! I downloaded Phone Info because I wanted to switch to 3G to save battery.
Again thanks!
nothing happened when I put in *#2263# in my note 2?
GetPatriotized said:
That totally worked! Thanks a million! I downloaded Phone Info because I wanted to switch to 3G to save battery.
Again thanks!
Click to expand...
Click to collapse
Glad I could help
taiwanese said:
nothing happened when I put in *#2263# in my note 2?
Click to expand...
Click to collapse
Are you using a cyanogenmod Rom?
Sent from my SAMSUNG-SGH-I317 using xda premium
AlonB. said:
Glad I could help
Are you using a cyanogenmod Rom?
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Does not work for me either running stock rogers rom.... It dails it as a USSD code
ServiceMode
Im running NOTEorious Prime and I'm taken to a ServiceMode screen, however it reads "RAT Selection option is restricted"
any Ideas? I get 4g LTE here and there but its a hit and miss.
Like on the Nexus 4 there is a dialer code and are able to change to LTE only or wcdma only etc...
They only give us 3 options to us through connection settings.
Reason for this is in certain places I know where I get lte it only gives me H+ and it isn't as fast. And at those times I'm not calling so I don't care.
Can any one please help me?
Sent from my SM-N900T using xda app-developers app
*#2263# enter that in dialer. Might work.
Sent from my SGH-M919 using Tapatalk 2
*#2263# enter that in dialer go to "[4] LTTE Band preference" then select lte band 4. hit the menu button and hit select. type the number 1.
also as you will not be able to make calls with this setting.
The better mode is LTE/WCMA (go figure).
turtlerocks01 said:
*#2263# enter that in dialer go to "[4] LTTE Band preference" then select lte band 4. hit the menu button and hit select. type the number 1.
also as you will not be able to make calls with this setting.
Click to expand...
Click to collapse
I know thank you. When I'm at work lte is there on one bar and is faster than H+. and other places too.
Once I leave I switch back to normal.
The funny thing is that on my Nexus 4 it had better radio's sorta in a way as it almost always choose the fastest regardless if LTE was available.
Sent from my SM-N900T using xda app-developers app
if you are on LTE only you can not call anyone and no one will be able to call you
dirtbikerr450 said:
if you are on LTE only you can not call anyone and no one will be able to call you
Click to expand...
Click to collapse
What part of I do not care haha? I understand and I wasn't calling any one when I am at work or when I go to certain stores and places.
Sent from my SM-N900T using xda app-developers app
Thank you for this information. Sorry if it's not obvious to me but is there a way to disable LTE using this menu? When I'm at work, it's constantly changing between LTE and HSPA+ as I walk about and it actually interrupts my data connection a bit. My HSPA+ speeds are more than acceptable to me.
pu1se80 said:
Thank you for this information. Sorry if it's not obvious to me but is there a way to disable LTE using this menu? When I'm at work, it's constantly changing between LTE and HSPA+ as I walk about and it actually interrupts my data connection a bit. My HSPA+ speeds are more than acceptable to me.
Click to expand...
Click to collapse
In normal settings you go to more networks and choose mobile networks, then choose wcdma only.
Sent from my SM-N900T using xda app-developers app