Related
I am looking for a working HTC universal's main board 99HAU0XX-02.
I am as well. Please post here if you have a spare available...
me too...even if the miniusb is broken.
Just thought i'd bump this up cos i'm looking for one now. As cheap as poss (free)
I got one with a broken screen only...offers?
ok, i'll let you know some time next week
I got an functionable MDA PRO,
if anybody is interested, please make an offer.
Cya
MB
I have no idea how much a motherboard would cost - fire a price and if it makes sense for me, I'm interested as my headphone jack is gone and I can't find it on its own.
Nice little store
If you would like to replace your main board there is a store by my house that has every peice that you need to build a new one. I live in taiwan. The parts range from $1.00-10.00. So, if you are in need of a special part let me know, maybe I can help.
Hi Cobb,
That would be great - I'm really looking for a headphone jack port as mine's gone and I had to eliminate it as the Uni was under the impression I had headphones connected at all time.
If you can check the price of this out, it would be cool.
Tks.
Sure
JZEE said:
Hi Cobb,
That would be great - I'm really looking for a headphone jack port as mine's gone and I had to eliminate it as the Uni was under the impression I had headphones connected at all time.
If you can check the price of this out, it would be cool.
Tks.
Click to expand...
Click to collapse
It is around $1.00-2.00 US. Just to let you know I used the female headphone connection from my Walkman. I will try to post a complete price list for the universal.
The parts are really cheap here, but sending them is not. Does anyone have any ideas how I could send replacement parts, and keep the price reasonable.
Any part that you want to replace should be less than $5.00 with exception to the screen, and the external housing.
For those of you with a broken USB female jack. While replacing mine I noticed that USB's are pretty standard. There seems to be two common types, I used the one from a 4port usb hub. I not had any problems yet.
I hope this helps. The prices I listed are for a single piece.
I have a full unit, everything is fine except for a usb connector that is FUBAR, Looking to get rid of the entire unit so I can buy a new one, shoot me a PM if anyone would like to purchase it or are selling a working unit.
cobb78 said:
It is around $1.00-2.00 US. Just to let you know I used the female headphone connection from my Walkman. I will try to post a complete price list for the universal.
The parts are really cheap here, but sending them is not. Does anyone have any ideas how I could send replacement parts, and keep the price reasonable.
Any part that you want to replace should be less than $5.00 with exception to the screen, and the external housing.
For those of you with a broken USB female jack. While replacing mine I noticed that USB's are pretty standard. There seems to be two common types, I used the one from a 4port usb hub. I not had any problems yet.
I hope this helps. The prices I listed are for a single piece.
Click to expand...
Click to collapse
Hi Cobb, how about that price list??? Just my guess, if parts are SO cheap, no transportation can be expensive!!! LOL
Anyways, what I´m looking for, is a new MoBo, you have any prices for them???
Thanks in advance, and congrats to all knowledged and not so knowledged ppl in this forum.
Willy
User665 said:
I have a full unit, everything is fine except for a usb connector that is FUBAR, Looking to get rid of the entire unit so I can buy a new one, shoot me a PM if anyone would like to purchase it or are selling a working unit.
Click to expand...
Click to collapse
User665, in what "cosmetic" and use state is the machine?? If you are "reasonable" I could be interested... Let me know things.
Willy
bump
Hi, I am bumping this thread as I am in need of the mainboard now. Any help would be greatly appreciated.
Hi,
I'm searching a motherboard too, if it's 128 Mb ugraded it's better for me, or if someone has a 128 Mb uni full working or with a broken LCD... please let me know.
I've made a new thread on the marketplace section too, you can write there or send me a PM. This is the link:
http://forum.xda-developers.com/showthread.php?t=532553
i have a htc universal mobo with a broken mini usb connector, it cant be repaired, some of the copper pads are missing, but the mobo still works fine
i have a G3 universal (imate jasjar) motherboard with damaged phone in and damaged screen. if someone want this let me know and make a offer. motherboard functions are ok..i see the content of the smartphon if i connect it to pc with usb cable.
i'm italian.
Hi this is my first post,
I have been searching the internet for a replacement backup battery for my XDA IIi (HTC Alpine) but without success.
The original backup battery fitted is a Maxell ML2016 rechargeable coin cell with tags to solder it onto the circuit board. While the Maxell ML2016 is available with soldering tags, none of the tag configurations match my battery. I assume that Maxell manufactured a special battery especially for HTC.
My battery is similar to the Maxell ML2016 T17 but the solder tag configuration is not quite right.
Does anyone know where I can buy a replacement battery? Perhaps someone on this forum has a new one for sale?
Thanks in advance,
this is not the htc alpine section but the blueangel section. it seems, the batteries are not of the same type, so you should ask in the alpine section. they would know best.
OOPs Sorry!
I have now put it in the correct section (I think). I will try and delete it from the blueange section if I can work out how.
thanks
you can't, but a mod or admin can.
This forum is for Galaxy 3 accessories!
thank you very much svetius for creating the section,...
cheers,,, great
Nice idea u found! Thx 4 creating it
Sent from my GT-I5800 using XDA App
Dock Gps ?
Is there eany DOCKING STATION for our phone (dosking station for charging and sync) ?
No, the usb/charger input is on the top side...
I know that but maby there is some docking station where we can put our phone in lendscape and stick usb cable in dock and phone for charging and syncing...
I don't know any but maby you look for something like that for the galaxy s (same input). Or search for a wireless dock (bluetooth)...
The Bugattie slim case for Samsung Galaxy i5800 is a great Accessories, too .
headsets
hi iam looking for the original stereo headsets that came with this phone. ant ideas where to purchase them?
I want to buy a car holder from dealextreme.com, because they are 4-5 times cheaper than the local dealers who usually sell exactly the same stuff. Can anybody suggest a good and durable one from there?
i dont know
great leather case best quality for case, this is my second case and its better than first about 50 times http://cgi.ebay.com/Stip-Leather-Ca...548813?pt=PDA_Accessories&hash=item43a74b740d
how do I replace the cover of the USB pin?
nicmicg said:
how do I replace the cover of the USB pin?
Click to expand...
Click to collapse
with great difficulty!
sorry, no idea, thought it looked a bit flimsy too, wondering how long it will last myself....
nicmicg said:
how do I replace the cover of the USB pin?
Click to expand...
Click to collapse
Build a custom cover using daily objects & your creativity
Sent from my GT-I5800 using Tapatalk
anyone out there know a place or website where i can get a new charging port flex cable that will actually work with out problems.
my original one didnt charge right unless i bent it backwards a little
i bought 3 off ebay and had problems with each
1st one off ebay had no sound
2nd one had no service
3rd one didnt charge at all.
the original one was a REV 1.0 connector and so were the others, so if anyone knows where to get one that will work with no problems let me know
THANK YOU
jhillyer253 said:
anyone out there know a place or website where i can get a new charging port flex cable that will actually work with out problems.
my original one didnt charge right unless i bent it backwards a little
i bought 3 off ebay and had problems with each
1st one off ebay had no sound
2nd one had no service
3rd one didnt charge at all.
the original one was a REV 1.0 connector and so were the others, so if anyone knows where to get one that will work with no problems let me know
THANK YOU
Click to expand...
Click to collapse
Try cnn.cn but i think you will find only the whole micro usb port and not the flex cable alone
I have tried 12 replacement parts from ebay for an i717 and they ALL have no service after putting them in. but the original one that doesn't charge still gets service fine...
edit: I can recommend http://www.parts4repair.com/. Worked like a charm
did you try the following:
http://forum.xda-developers.com/showthread.php?t=1948735
[/COLOR]
talonmike04 said:
I have tried 12 replacement parts from ebay for an i717 and they ALL have no service after putting them in. but the original one that doesn't charge still gets service fine...
Click to expand...
Click to collapse
well a i717 component in a n7000? version mismatch no?
Sent from my GT-N7000 using Tapatalk 2
Yes, the AT&T version and the International version have different radios, and the micro USB port is connected to them. They are NOT interchangeable.
i717 ≠ GT-N7000
Any tips anyone?
Hi, I just want to revive this thread rather than start a new one.
I am gonna swap my my usb charging port for a one I bought on eBay. Does anyone have any tips I should know about that you can tell me?
I'm going by this youtube video. this is all I got and of course I'm kinda scared.:crying:
Thanks. Will check back later.
Easy to do, but will cause other issues
Hi. I too have just brought a note with this problem.
The replacement is easy, remove battery cover, battery sim etc. Take out the screws, use something thin to pries the edge off. Its the lip below the screen level though. After that, 3 more screws for the bottom section, then take out the one screw in the thin motherboard piece. Slide out the old flex, slide in the new one, re assemble.
The biggest problem is that youll most likely lose 80 % of your reception from it. When the phone is open, try to see if there is any corrosion behind your USB port, if there is clean it and try it. I did that as im sending my ebay one back for a replacement, Now my old one seems to be working, but for how long, i dont know.
SalJam
I bought a battery charger and extra battery. I bought the brand Hyperion but I've heard there are better brands. Anyway, I don't charge my phone any more... I just swap batteries now. One is always on the charger and one in the phone. It works fantastically and further, the phone always has a charge. When I want to swap files I remove the card and put it in the PC. Works really good.
If you are on about the daughter board I got one of Amazon for£10 took less than 10 mins to fit and have had no problems. Came In OEM packaging
Any questions feel free to PM
Sent from BOX13.
---------- Post added at 10:20 PM ---------- Previous post was at 10:16 PM ----------
SalJam said:
Hi. I too have just brought a note with this problem.
The replacement is easy, remove battery cover, battery sim etc. Take out the screws, use something thin to pries the edge off. Its the lip below the screen level though. After that, 3 more screws for the bottom section, then take out the one screw in the thin motherboard piece. Slide out the old flex, slide in the new one, re assemble.
The biggest problem is that youll most likely lose 80 % of your reception from it. When the phone is open, try to see if there is any corrosion behind your USB port, if there is clean it and try it. I did that as im sending my ebay one back for a replacement, Now my old one seems to be working, but for how long, i dont know.
SalJam
Click to expand...
Click to collapse
It's 10 black screws on the back & 5 white to take there cover of over the daughter board. No need to undo a mother board screw whats this about losing 80%signal?
That's rubbish, Sir! Mine is on5 bars H+ and has been sincei did it. As there is a new mix. Too the sound is better, IMO
Sent from BOX13.
Bought mine off ebay worked 100%, signal is still the same, nothing happens to signal. But you have to buy the whole board. Mine didnt come with a wee microphone bit so i took off my old one, stuck the sticky bit within the square part and put the rubber part in the cover and screwed it on. Everything working fine.
Sent from my GT-N7000 using xda premium
My usb port is busted so am replacing that board too. However, I've bought two off ebay and both have had problems. First one fixed the charging issue but didn't give me any reception (well one bar now and then) and the second gave me signal but had a busted micro usb port. EBay can be so fustrating sometimes!!
howard bamber said:
If you are on about the daughter board I got one of Amazon for£10 took less than 10 mins to fit and have had no problems. Came In OEM packaging
Click to expand...
Click to collapse
I will have to try the ones on amazon instead.
fl4r3 said:
My usb port is busted so am replacing that board too. However, I've bought two off ebay and both have had problems. First one fixed the charging issue but didn't give me any reception (well one bar now and then) and the second gave me signal but had a busted micro usb port. EBay can be so fustrating sometimes!!
I will have to try the ones on amazon instead.
Click to expand...
Click to collapse
parts4repair has working ones lol.
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
parts4repair has working ones lol.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I'll try them out if my Amazon one turns out to be a dud (Which I have a feeling it will )
fl4r3 said:
Thanks, I'll try them out if my Amazon one turns out to be a dud (Which I have a feeling it will )
Click to expand...
Click to collapse
I have just fitted my 3rd replacement board and loose most of my signal after fitting it. My original board gives me full signal but intermittent charging. :crying:
Do all N7000 use the same board or does country intended for make a difference? My note is an International phone made for Hong Kong.
copperdawgnc said:
I have just fitted my 3rd replacement board and loose most of my signal after fitting it. My original board gives me full signal but intermittent charging. :crying:
Do all N7000 use the same board or does country intended for make a difference? My note is an International phone made for Hong Kong.
Click to expand...
Click to collapse
To be honest I still haven't got a perfect replacement yet but one that is at least functional (get werid noises during phone calls - not on my end but on whoever is calling me).
You do have to make sure you get the correct board though. If you look on the original board it should have some writing in gold near the top. Mine said Rev 1.0 so I got replacements which were rev 1.0 too. Apparently there are other revisions (although I didn't come across any others).
fl4r3 said:
To be honest I still haven't got a perfect replacement yet but one that is at least functional (get werid noises during phone calls - not on my end but on whoever is calling me).
You do have to make sure you get the correct board though. If you look on the original board it should have some writing in gold near the top. Mine said Rev 1.0 so I got replacements which were rev 1.0 too. Apparently there are other revisions (although I didn't come across any others).
Click to expand...
Click to collapse
mine is a version 1.00 see attached my original is on the top one of the replacements below
I did my replacement yesterday.
Got the part from this seller:
http://www.ebay.co.uk/itm/190821533955?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
And then followed this link on how to do it, took me 2 attempts as the 1st time I hadn't pushed one of the ribbon cables down and had no service. After pushing it in and putting it all back together it works again
http://www.youtube.com/watch?v=pD9R-YUT69Q
Ordered one from parts4repair, we'll see how that one works. The one I have now, works, but the signal level sucks.
p51d007 said:
Ordered one from parts4repair, we'll see how that one works. The one I have now, works, but the signal level sucks.
Click to expand...
Click to collapse
hi, did the flex from parts4repair work?
cheers
Yep, worked PERFECTLY. Improved signal performance in areas where I had little to no signal.
starfoo12 said:
hi, did the flex from parts4repair work?
cheers
Click to expand...
Click to collapse
OK, I understand the theory of high freq air transformers.
I also understand the price for the device is high and people do their own devices el chipo etc...
What I cannot understand why all those devices on eBay sold with a special back cover?
Doesn't the international N7100 support Wireless Charging from the box?
I looked inside the back cover of my Vietnam-made, Philippines-sold device. There are two pins on the cover directly touching another two pins near the battery compartment. The resistance between those two pins is small but above zero. And there is some kind of tick label inside of the back cover covering most of the space. Is it a kind of receiver coil?
How can I verify I need just the charger plate or another back cover too?
Thanks.
sms2000 said:
OK, I understand the theory of high freq air transformers.
I also understand the price for the device is high and people do their own devices el chipo etc...
What I cannot understand why all those devices on eBay sold with a special back cover?
Doesn't the international N7100 support Wireless Charging from the box?
I looked inside the back cover of my Vietnam-made, Philippines-sold device. There are two pins on the cover directly touching another two pins near the battery compartment. The resistance between those two pins is small but above zero. And there is some kind of tick label inside of the back cover covering most of the space. Is it a kind of receiver coil?
How can I verify I need just the charger plate or another back cover too?
Thanks.
Click to expand...
Click to collapse
if not mistaken that is the NFC antenna and connector.
vash_h said:
if not mistaken that is the NFC antenna and connector.
Click to expand...
Click to collapse
So those on-battery antennas like
http://www.ebay.com/itm/Qi-Standard...ories_MobilePhoneChargers&hash=item4170166bb8
is as addition to the Note 2?
Interesting how two antennas don't interfere with each other.
I need not NFC actually...
yes its a user made addition because Samsung is yet to announce a stock back cover with NFC and wireless charging...
Ather said:
yes its a user made addition because Samsung is yet to announce a stock back cover with NFC and wireless charging...
Click to expand...
Click to collapse
Yeah, Toyota-style innovations.
Release something and let the buyers become your testers. At very maximum we can revoke and make free repairs (upgrades).
Hope not everyone be so smart to actually require free repair (upgrade).
Faster, people, live faster...
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator