Hello everyone, I have been researching on how to activate an HTC Evo 4G on the Boost network for a week now and I've been making some headway. I am stuck trying to write the NV files for it. I am using the guide linked below; I'm at 7:45 and just unlocked the phone with the SPC. I don't know where to get the NV files to write to.
I have tried not to post any questions here because everyone on the forums is very helpful, but I have reached a wall and need some expert help. I have an active Boost account (Galaxy Prevail).
Well, it won't let me link to the video but it's "Flash HTC Evo to Boost Mobile" by Flashed phones on youtube.
You have to extract the NV files from your donor phone. Use CDMA workshop under the Memory Tab. Remember to save each one as a separate txt file. Then you'll need to write them into your Evo.
Related
hello there, i have been reading lots of diffrent post and i can not find a straight forward guide on how to flash a evo 4g to boost. PLEASE HELP THIS IS VERY FRUSTRATING!!!!
CAN SOMEONE PLEASE POST A STEP BY STEP GUIDE WITH ALL THE NEEDED SOFTWARE TO PUT A EVO 4 G ON TO BOOST!!!!
THANKS
check out youtube its a guy using cdma workshop to flash and something called rru to
the phone you then have rewrite the data for boost to the phone
Hello!
I was wondering if someone could provide me with step by step instructions on how to change my htc evo 4g to virgin mobile service.
I have downloaded a few things already :
1. EVO FLASHING TOOLS. rar
2. VM MMS ROMS.rar
3. VM-official-cm-7.2.0-RC1_Patcher.zip
Will I be able to use the data and internet?
But I have NO IDEA what to do with them. Also, I apologize if this is a repost of a forum already stated. I searched and couldn't find any solutions.
Anywho, any suggestions or help would be greatly appreciated.
CuriousGal said:
Hello!
I was wondering if someone could provide me with step by step instructions on how to change my htc evo 4g to virgin mobile service.
Click to expand...
Click to collapse
Did you root your phone yet? You probably need to start with that so that you can start flashing other images on to your phone. I've never seen those files ( I just started looking because I'm trying to do the same thing ). But a few Google searches wised me up. If you haven't rooted your phone yet, do that first.
Good luck.
Hey guys, I have searched in all of the "Samsung Epic 4G Touch" forums for some help with this for an hour, so forgive me if this is duplicated elsewhere.
I have a friend who gave me his phone since he has too much money. He flashed it to Boost Mobile. The current original ESN is clean and is a Sprint Network ESN.
I have been trying to find a guide to help me restore the original ESN to this phone from Boost, but haven't been able to find it anywhere.
I am familiar with Odin, ADB, and am not afraid of CMD windows, I have the original ESN/MEID and the MSL password. I just want to restore this phone to use it on the Sprint network again.
Obviously, flashing a Stock Sprint ROM or performing a factory reset won't do the trick. (I already flashed a stock Sprint EK02 ROM with Odin and upgraded to EL29. The ESN is still the Boost Mobile ESN and not the one on the back of the box).
Thank you in advance.
Your friendly, neighborhood Lagomorph,
--Sadie Nibblesworth
The program you are looking for is called "DFS software", you can google or youtube it to learn how to program the orig esn back on the device for sprint activation
Hey Guys,
I have a sprint galaxy s3 that i would like to flash over to metro.
Tools i already have:
CDMA Workshop 2.7
DFS 4.3.1
QPST 2.7
QXDM 3.12
i got these in a zip online saying it was the package needed to flash sprint galaxy s3 over to metro pcs. I have no clue where to start with these, i've tried to search the forums and found several tutorials but i'm confused. Some say i have to change my imei to esn and some say i have to an MSL number.
Please help, i'm a first timer at flashing but i've rooted a few galaxy's. I don't want to pay $85 to $100 to just flash my phone.
Any help (Step by step) will be greatly appreciated.
Thanks!:good:
**bump** please someone help me with this
youngdhillon said:
Hey Guys,
I have a sprint galaxy s3 that i would like to flash over to metro.
Tools i already have:
CDMA Workshop 2.7
DFS 4.3.1
QPST 2.7
QXDM 3.12
i got these in a zip online saying it was the package needed to flash sprint galaxy s3 over to metro pcs. I have no clue where to start with these, i've tried to search the forums and found several tutorials but i'm confused. Some say i have to change my imei to esn and some say i have to an MSL number.
Please help, i'm a first timer at flashing but i've rooted a few galaxy's. I don't want to pay $85 to $100 to just flash my phone.
Any help (Step by step) will be greatly appreciated.
Thanks!:good:
Click to expand...
Click to collapse
i have flashed my sprint s3 (SPH-L710) to Virgin Mobile USA which i think will be like yours (CDMA)
all i can say is this
there are quite a few different guides out there (boost, page plus and even cricket)
virgin mobile and metro pcs are a little different but not much.
you are going to have to do research and alot of trial and error.
you will use a mixture of all those tools you listed above to get the results done
i know may way around these apps now and which ones can get certain things done and which ones report wrong info.
i still can not even change my SPC code to a new code like 000000
i see lots of guides on how to do it and i follow them to the letter and they do not work
i then asked for help and no one says anything
the info is out there you just have to read
flashed galaxy s3 sprint to metro
Hello,
I was able to flash my phone using odin 3.4, metropolis and a stock rom. There are alot of tutorials on youtube but my only issue is i have no mobile network. I can not figure out how to get an MDN, MEID for metro. I was able to flash my iphone fully but i can not get a mobile network even when i change the mobile network on the device.
Metro MEID
cookie721 said:
Hello,
I was able to flash my phone using odin 3.4, metropolis and a stock rom. There are alot of tutorials on youtube but my only issue is i have no mobile network. I can not figure out how to get an MDN, MEID for metro. I was able to flash my iphone fully but i can not get a mobile network even when i change the mobile network on the device.
Click to expand...
Click to collapse
You have to have Metro put your MEID in their database.Not many Metro stores will do that for you. But there are a lot on the internet that will. They usually charge $10.00. Just look on craigslist for shops that flash phones to metro.They will be able to have your # put in the database.
I hope that is the answer you needed and that I've understood your question right.
Also, you shouldn't even have to go in to a Metro store to have it activated. Once the correct #'s are in the phone and the MEID is in their database it should program like any other when getting activated.
HELP
en11gma said:
i have flashed my sprint s3 (SPH-L710) to Virgin Mobile USA which i think will be like yours (CDMA)
all i can say is this
there are quite a few different guides out there (boost, page plus and even cricket)
virgin mobile and metro pcs are a little different but not much.
you are going to have to do research and alot of trial and error.
you will use a mixture of all those tools you listed above to get the results done
i know may way around these apps now and which ones can get certain things done and which ones report wrong info.
i still can not even change my SPC code to a new code like 000000
i see lots of guides on how to do it and i follow them to the letter and they do not work
i then asked for help and no one says anything
the info is out there you just have to read
Click to expand...
Click to collapse
^^Hello, i know this post is old but i have been searching all over the wed for days now on how to flash a sprint SPH-L710 to virginmobile, coul you explain to me your steps on how you did it? thank you
Hi all, I've never been to this side of the forums, I'm usually in the AT&T s3 threads. So heres whats going on my cousin has VM and a friend of his gave him a Sprint S3 thinking he could activate on VM since they use the sprint network. Well he found out he couldn't do it directly. but after a quick search on google we found that it could be done. Ive been searching here and google and got a lot of info on the procedure but couldn't find a step by step tutorial. Ive already rooted the S3 and flashed a TWRP recovery, Downloaded Conquest rom for it.
I also have downloaded the CDMA tools DFS tools, how to use it i'm clueless. IS there a video or tutorial on this?
After reading this thread several times :
http://forum.xda-developers.com/showthread.php?t=2060085
The donor phone is a LG optimus V
I know that 4g isnt going to happen, unless he had a 4g donor.
Do I need to root the LG phone to get the MSL info via apk like MYMSL Reader?
Is DIAG mode ##DIAG# from the phone dialer?
What is the samsung password and how do I get it?
Any help will be GREATLY appreciated....
I know the only way you used to be able to get the msl on the optimus v was to use CDMA workshop. Its been years since I have had one, so there might be an easier way now.
pbailey212 said:
I know the only way you used to be able to get the msl on the optimus v was to use CDMA workshop. Its been years since I have had one, so there might be an easier way now.
Click to expand...
Click to collapse
Thanks
I did come across another thread that I didnt find originally This Looks like what I need ONCE I get the MSL and/or whatever from the Optimus V. Back to searching and reading
http://forum.xda-developers.com/showthread.php?t=2270191
and this
http://forum.xda-developers.com/showthread.php?t=991668