I was using CM7 with 3.4.2_177-005_NORDIC
I installed SndInitDefy_2.0
But did not wiped data/factory and Wipe cache
I flashed JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF
The process reached 100% in rsd lite (it showed manually reboot) and rebooted automatically, now it stuck at android logo, nothing after that.
I tried removing battery and pressing volume up and down at same time. But still nothing happened.
Now i am stuck at android logo.. please help.. i am not expert at this...
What could help: press the volume down button for several seconds while powering on until you get the image of a small robot with an exlamation mark. There you press the volume buttons so you see a menu with some options. Choose wipe data there and wait until it's done. If you are lucky the system will boot properly nkw (just reboot).
dhanu_aqua said:
I was using CM7 with 3.4.2_177-005_NORDIC
I installed SndInitDefy_2.0
But did not wiped data/factory and Wipe cache
I flashed JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF
The process reached 100% in rsd lite (it showed manually reboot) and rebooted automatically, now it stuck at android logo, nothing after that.
I tried removing battery and pressing volume up and down at same time. But still nothing happened.
Now i am stuck at android logo.. please help.. i am not expert at this...
Click to expand...
Click to collapse
Now Listen
1. reboot your phone.
2. press power button+volume down for 10 sec and release it will show an exclamation mark with android sign ( If it doesn't show up. just flash you original sbf or flash file. like you stock froyo or gb what did u have.)
3. now press volume up+down. same time
4. now wipe everything .
5 enjoy.
( If anything step or anything doeesn't happen.) just flash you original sbf. or tell me. i ll tell you..)
hit thanks if i have helped you.
fauji OUT
DON'T FORGET TO CLICK ON
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am Suffering from Obsessive-ROM Updating Disorder[Meaning]
ROM ►LiquidArc by Jboogie @ 1Ghz
Proud to be a DEFY Owner
switch off phone.... remove battery... press and hold Vol+ button.... the phone should start.. if not then press the power button while holding the vol+ button... you will see boot loader menu (9.10)... connect usb wire with PC and start RSDLite... then flash your favourite 2.2.2 froyo SBF.
popcorn1122 said:
switch off phone.... remove battery... press and hold Vol+ button.... the phone should start.. if not then press the power button while holding the vol+ button... you will see boot loader menu (9.10)... connect usb wire with PC and start RSDLite... then flash your favourite 2.2.2 froyo SBF.
Click to expand...
Click to collapse
LoL popcorn he just said that he had already flashed a sbf. so he knew how to do it.! just tell him the solution for his problem
cm7 already has a boot menu installed. If you install SndInitDefy_2.0, it will have multiple entries....
so the best way is to enter the boot loader in by my above method and install the FULL fresh sbf.
---------- Post added at 03:06 PM ---------- Previous post was at 03:03 PM ----------
zed_fauji said:
LoL popcorn he just said that he had already flashed a sbf. so he knew how to do it.! just tell him the solution for his problem
Click to expand...
Click to collapse
The flashing of .sbf can happen without the need of vol++PowerOn... by connecting the usb to pc and USB debugging on with rsdlite and Moto drivers.
Related
LG after my G3 running on the original rom or. Tot and. KDZ are suspended in this picture hope you like my help with.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ouch a soft brick. Damaged recovery maybe?
Try a hardware factory reset again if you can:
Hardware factory reset (Using power and vol buttons when you can't run it from within Android 4.4)
Take your phone and turn it off – just press power button and select “power off”.
Wait while your device is shutting down.
Then, press volume down button and power button together until the LG logo appears on the screen.
When the LG logo is displayed, let go of the power button, keep pressing the volume down key and then press once more the power button.
Once you do that, on your LG G3 the factory reset menu will be displayed.
Press power button in order to agree and wait while the hard reset is being completed.
If you can't do that do you have download mode at least? If download mode can run your not fully bricked. And you can run the KDZ flasher, flash the tot and dll files again.
Hendrickson said:
Ouch a soft brick. Damaged recovery maybe?
Try a hardware factory reset again if you can:
Hardware factory reset (Using power and vol buttons when you can't run it from within Android 4.4)
Take your phone and turn it off – just press power button and select “power off”.
Wait while your device is shutting down.
Then, press volume down button and power button together until the LG logo appears on the screen.
When the LG logo is displayed, let go of the power button, keep pressing the volume down key and then press once more the power button.
Once you do that, on your LG G3 the factory reset menu will be displayed.
Press power button in order to agree and wait while the hard reset is being completed.
If you can't do that do you have download mode at least? If download mode can run your not fully bricked. And you can run the KDZ flasher, flash the tot and dll files again.
Click to expand...
Click to collapse
Cannot do it, my LG G3 Sprint cannot factory reset and hang a factory status
me too... halp
vandieutot said:
LG after my G3 running on the original rom or. Tot and. KDZ are suspended in this picture hope you like my help with.
Click to expand...
Click to collapse
i got the same problem man... i give up :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
What if u plug it to pc ..will it be recognize by lg pc suite ?
From Lg G3 "the beast"
LG G3 Unbrick/Unroot (set to Stock ROM) stuck on Status 2
I had the same issue (phone stuck on Status 2) during stock ROM update. This is what I did to get it to work :
Unplug battery.
After a couple of seconds, plugged battery.
Repeated step that makes phone go into download mode (Volume Key up pressed while plugging into computer USB).
Computer continued downloading everything and finally made it to Status 3 (update is complete).
Rebooted phone. Everything works OK!
ahpitre said:
I had the same issue (phone stuck on Status 2) during stock ROM update. This is what I did to get it to work :
Unplug battery.
After a couple of seconds, plugged battery.
Repeated step that makes phone go into download mode (Volume Key up pressed while plugging into computer USB).
Computer continued downloading everything and finally made it to Status 3 (update is complete).
Rebooted phone. Everything works OK!
Click to expand...
Click to collapse
close the program before the process is finished
I have a problem to make phone to factory reset i download mode... My kid make a password on phone and forget it
Whe I click vol down and power buttons phone start i download mode... only options I have on menu is system info, show barcode, reboot to bootloader, reboot to download mode, reboot, power down...
Why I dont have factory reset option??
Select reboot to bootloader, then select recovery, then give it a couple seconds, then press the power button and tap the volume up button and release both. Sorry for the excessive use of the word 'then'
Ok... I do This... And I have a Red Triangle ? Nothing else... 40sec-1min and phone restart automaticly...
When you are at the screen with the red triangle, press and hold the power button and while holding down the power button, press and release the volume up button.
THX for help Works
fernandezhjr said:
When you are at the screen with the red triangle, press and hold the power button and while holding down the power button, press and release the volume up button.
Click to expand...
Click to collapse
I'm not good at explaining things so thanks for clarifying for him lol
Same problem
Was your phone unlocked after doing the hard reset? I tried to do the same - like you, I do not see a factory reset option when I enter recovery mode. My phone reboots but remains locked. I cannot remember my password anymore. What would you suggest?
I have the same issue. Phone only boots into this mode (regardless of what buttons i press) shown in the image attached. It doesn't let me choose anything at all, and reboots after a while. How to change the bootup mode ?
I had the same issue as OP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's another message that pops up after I keep the phone connected to the PC. I dont press any button or do anything, it just keeps on showing this screen for a few seconds then shuts down, on it's on.
shani248 said:
Here's another message that pops up after I keep the phone connected to the PC. I dont press any button or do anything, it just keeps on showing this screen for a few seconds then shuts down, on it's on.
Click to expand...
Click to collapse
See this.
http://forum.xda-developers.com/showpost.php?p=62326237&postcount=19
Good luck!!
Thank you so much for this. What happened in the end was that i pressed all three buttons while being connected to the pc through a cable, and when it vibrates, i let go of the power button and it boots into bootloader mode. Thanks again for the tip !
Thanks Mate
Help please!!!!!!
How do I unlock this phone? Any help? I've tried resetting it
Tevin Jones said:
How do I unlock this phone? Any help? I've tried resetting it
Click to expand...
Click to collapse
What do you exactly mean by unlock? Network unlock?
Sent from my HTC U11 using Tapatalk
Thanks a ton man, works like a charm
dudekken said:
Ok... I do This... And I have a Red Triangle ? Nothing else... 40sec-1min and phone restart automaticly...
Click to expand...
Click to collapse
do exactly as you are demonstrated . . . . it surely works, mine did . . .
What happens if you don't get a red triangle, or no options for factory reset... PHONE is still unlocked... I've tried every combination.. EITHER I'm really bad at button pushing.. I'VE done it over and over again.. Anyone? Phone was rooted, remains unlocked.. But can't find a way to get hard reset... I'm open for more button combos.. Lol..
htc 29S500 X9u MODEL does not show factory reset option
fernandezhjr said:
When you are at the screen with the red triangle, press and hold the power button and while holding down the power button, press and release the volume up button.
Click to expand...
Click to collapse
This worked. Thank you very much. There are many videos out there, all demonstrating the hard resetting of the factory data but they not emphasizing the last step i.e. " press and release the volume up button ", and this made the difference for me.
Thank you very much for the tip.
Gracias funcionó en enero 2020...
My phone is HTC One M8s 16GB. After installing ROM my phone doesn't work anymore. Tryed pressing Power button + Volume Down nothing, Power button + Volume Up it goes back to the same logo, but if it is disconnnected from phone charger it shows blackscreen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(lightning bolt is yellow)
Try holding power + vol up for a minute or more, and see if it forces a reboot.
Do you ever see the HTC logo screen, or bootloader screen?
redpoint73 said:
Try holding power + vol up for a minute or more, and see if it forces a reboot.
Do you ever see the HTC logo screen, or bootloader screen?
Click to expand...
Click to collapse
No, after ~10sec of holding power + volume up it goes to same screen. Should I disconnect from charning my phone?
Whooops1 said:
No, after ~10sec of holding power + volume up it goes to same screen. Should I disconnect from charning my phone?
Click to expand...
Click to collapse
Yes, try disconnecting charger and holding power+vol up, and note if it reboots, what screens appear (HTC logo, bootloader) etc.
redpoint73 said:
Yes, try disconnecting charger and holding power+vol up, and note if it reboots, what screens appear (HTC logo, bootloader) etc.
Click to expand...
Click to collapse
Thank you sir, everything booted nicely. Again thank you.
redpoint73 said:
Yes, try disconnecting charger and holding power+vol up, and note if it reboots, what screens appear (HTC logo, bootloader) etc.
Click to expand...
Click to collapse
Phone boots normaly but I can't do factory reset. It freezes at HTC logo
Whooops1 said:
Phone boots normaly but I can't do factory reset. It freezes at HTC logo
Click to expand...
Click to collapse
How are you trying to factory reset, in OS or in TWRP?
Tryed in OS and in bootloader
Whooops1 said:
Tryed in OS and in bootloader
Click to expand...
Click to collapse
Try in TWRP. Although I'm curious why (for what purpose) you're trying to wipe, which you should have done before flashing the ROM.
please helppp meeee. the tablet has no removeble battery. it is in loop and i cant shut down and i cant put in download mode
Galaxy Note 10 (SM-P605) with qualcomm. I downloaded this twrp-3.1.1-0-lt03ltexx.img from here https://twrp.me/samsung/samsunggalax...12014qcom.html.
odin gave pass ok and flashed it. now it is in loop and no button work. Battery can'0t be removed as it is inside the tablet. how can i solve - please help meeeeeeeeeeeeeeeeeeee
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance
You should still be able to get into Recovery or Fastboot mode. When it's bootlooping, just keep Vol+ or Vol- pressed. No need to press home button on the Note. Preferably you have TWRP installed, i don't know whether the Fastboot or Samsung recovery menu offer power-off as first solution.
When my Galaxy S5 froze last time, i was unable to perform a cold boot or shutdown, but these two keys worked, and you had to keep vol and menu pressed and to release power button when the boot screen comes up. Probably i just repeatedly failed on the cold boot/powerdown, though there was one key less to keep down. One the Note this would mean to keep just power pressed for around 10 seconds.
Help me to solve the problem
lecorbusier said:
You should still be able to get into Recovery or Fastboot mode. When it's bootlooping, just keep Vol+ or Vol- pressed. No need to press home button on the Note. Preferably you have TWRP installed, i don't know whether the Fastboot or Samsung recovery menu offer power-off as first solution.
When my Galaxy S5 froze last time, i was unable to perform a cold boot or shutdown, but these two keys worked, and you had to keep vol and menu pressed and to release power button when the boot screen comes up. Probably i just repeatedly failed on the cold boot/powerdown, though there was one key less to keep down. One the Note this would mean to keep just power pressed for around 10 seconds.
Click to expand...
Click to collapse
I have exactly the same tablet. I tried to install the twrp (no errors) through ODIN. After the installation of the Super Su I have seen that many services started to stop and the tablet was almost completely blocked. I removed Super Su (from the app) and when I restarted the tablet the nightmare has started too.
I read some advices regarding remove the battery (on other samsung smartphones) but this is a tablet so any help is appreciated.
Any idea? Even if I manage to have the screen with "a custom os can cause critical problems"..... if I try to push the volume + the loop starts againg
Hope someone can give me an answer
Unbrick by flashing stock rom via Kies or Odin, then TWRP via Odin, then Magisk via TWRP.
I use this phone normally to watch youtube, and use social apps, and he changed wallpaper without i do nothing, i try change to my wallpaper to normally, but he dont response, and i reset the phone and when turn on, stayed like this, i try format and no sucess, any have idea how to fix him ?
Hmmm...
Custom ROM or not, root or not?
Go into recovery mode and clear the cache.
ze7zez said:
Hmmm...
Custom ROM or not, root or not?
Go into recovery mode and clear the cache.
Click to expand...
Click to collapse
not custom rom and not root, in video i show recovery mode and i cant enter in android configuration
Go into recovery mode (with the device powered off, hold Volume Down + Power) and you see what options are available. I'm not suggesting anything because I don't know the device, but I'll hint when I see a screenshot in recovery mode.
ze7zez said:
Go into recovery mode (with the device powered off, hold Volume Down + Power) and you see what options are available. I'm not suggesting anything because I don't know the device, but I'll hint when I see a screenshot in recovery mode.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is recovery mode i turn on hold volume down and power, in this phone, he call "Security Mode" in my language, dont have options in screen
and i try turn on with hold volume up and power, one blue light appears and the phone dont response
HeenryL said:
this is recovery mode i turn on hold volume down and power, in this phone, he call "Security Mode" in my language, dont have options in screen
Click to expand...
Click to collapse
The image shows that the system booted into safe mode, not recovery mode. Can you check with the adb devices command how the phone connected to the PC responds?
Recovery mode looks like >this< video at 1:30.
ze7zez said:
The image shows that the system booted into safe mode, not recovery mode. Can you check with the adb devices command how the phone connected to the PC responds?
Recovery mode looks like >this< video at 1:30.
Click to expand...
Click to collapse
i try enter in recovery mode according to the video, he fixed in loop boot and use the ADB commands in CMD the phone dont response, just returning "waiting device", i buy new battery for my old phone to the fix him, will arrive in two days, I bought this xperia 2 months ago, its already broken its very sad for me, in my country this phone cost 2 salary, and sony dont offer oficial support here, i just put he in closet and forgget him, guy very very thanks so much to try help me, and your time too, thanks
try download the firmware with xperfirm later flash with newflasher but the newflasher files in firmware downloaded archive next cilck the newflasher exe and good luck i hope make a back up of yoru drm keys
sony xperia xa2 ultra stuck on dead battery and sony screen and wont go past them
so this morning in class I lightly dropped my phone from my hand onto the table lightly, and that was it, I had this phone for a while so its filled with stuff. Its stuck on loop on the Dead battery sign to the white sony screen and none of the...
forum.xda-developers.com