Develop Bugs

[Q] Please Help....

I was using CM7 with 3.4.2_177-005_NORDIC
I installed SndInitDefy_2.0
But did not wiped data/factory and Wipe cache
I flashed JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF
The process reached 100% in rsd lite (it showed manually reboot) and rebooted automatically, now it stuck at android logo, nothing after that.
I tried removing battery and pressing volume up and down at same time. But still nothing happened.
Now i am stuck at android logo.. please help.. i am not expert at this...

What could help: press the volume down button for several seconds while powering on until you get the image of a small robot with an exlamation mark. There you press the volume buttons so you see a menu with some options. Choose wipe data there and wait until it's done. If you are lucky the system will boot properly nkw (just reboot).

dhanu_aqua said:
I was using CM7 with 3.4.2_177-005_NORDIC
I installed SndInitDefy_2.0
But did not wiped data/factory and Wipe cache
I flashed JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF
The process reached 100% in rsd lite (it showed manually reboot) and rebooted automatically, now it stuck at android logo, nothing after that.
I tried removing battery and pressing volume up and down at same time. But still nothing happened.
Now i am stuck at android logo.. please help.. i am not expert at this...
Click to expand...
Click to collapse
Now Listen
1. reboot your phone.
2. press power button+volume down for 10 sec and release it will show an exclamation mark with android sign ( If it doesn't show up. just flash you original sbf or flash file. like you stock froyo or gb what did u have.)
3. now press volume up+down. same time
4. now wipe everything .
5 enjoy.
( If anything step or anything doeesn't happen.) just flash you original sbf. or tell me. i ll tell you..)
hit thanks if i have helped you.
fauji OUT
DON'T FORGET TO CLICK ON
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am Suffering from Obsessive-ROM Updating Disorder[Meaning]
ROM ►LiquidArc by Jboogie @ 1Ghz
Proud to be a DEFY Owner

switch off phone.... remove battery... press and hold Vol+ button.... the phone should start.. if not then press the power button while holding the vol+ button... you will see boot loader menu (9.10)... connect usb wire with PC and start RSDLite... then flash your favourite 2.2.2 froyo SBF.

popcorn1122 said:
switch off phone.... remove battery... press and hold Vol+ button.... the phone should start.. if not then press the power button while holding the vol+ button... you will see boot loader menu (9.10)... connect usb wire with PC and start RSDLite... then flash your favourite 2.2.2 froyo SBF.
Click to expand...
Click to collapse
LoL popcorn he just said that he had already flashed a sbf. so he knew how to do it.! just tell him the solution for his problem

cm7 already has a boot menu installed. If you install SndInitDefy_2.0, it will have multiple entries....
so the best way is to enter the boot loader in by my above method and install the FULL fresh sbf.
---------- Post added at 03:06 PM ---------- Previous post was at 03:03 PM ----------
zed_fauji said:
LoL popcorn he just said that he had already flashed a sbf. so he knew how to do it.! just tell him the solution for his problem
Click to expand...
Click to collapse
The flashing of .sbf can happen without the need of vol++PowerOn... by connecting the usb to pc and USB debugging on with rsdlite and Moto drivers.

ONE M8 wont power on and wont charge.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All i can get is this screen. It doesn't boot or charge only this. I tried power+volume up, volume down etc. still did not work. Also i tried other charges.
All I can manage to enter is that white backgrounded screen then i tried to enter the recovery and again i get that screen.

I plugged to PC and i hold power, vol up vol down etc. i just hold randomly. And I got windows connected sound. All the alphabet came through as disks.
These are the not empty ones:
After that I hold the power button I got these:
Than it returned back to the image in the first post.

I still can see the htc splash screen after 2 seconds first image in the first post.
And also sometimes i am managing to connect it to PC. QHSUSB_BULK is the device name

royalchild said:
I tried power+volume up, volume down etc. still did not work.
Click to expand...
Click to collapse
Did you try holding power+vol up for a minute or more?

redpoint73 said:
Did you try holding power+vol up for a minute or more?
Click to expand...
Click to collapse
Actually I tried all those stuff. Now the only thing that I can get is boot screen. I can enter the fastboot but i have no idea what to do with. And also when i enter fastboot my Windows 10 can see My Htc name under the device manager.

royalchild said:
Actually I tried all those stuff. Now the only thing that I can get is boot screen. I can enter the fastboot but i have no idea what to do with. And also when i enter fastboot my Windows 10 can see My Htc name under the device manager.
Click to expand...
Click to collapse
This is all a good thing, and points to your phone being recoverable.
From what you've posted, its sounds like YES power + vol up works (this function forces a reboot) and power + vol down get you into bootloader. So the phone powers on; the main issue is not booting into Android OS.
To determine the path forward, we'll need more info. Please do fastboot getvar all, and post the output (delete IMEI and serial number before posting).

Recovery is not Seandroid Enforcing and loop - no button can me pressed. please help!

please helppp meeee. the tablet has no removeble battery. it is in loop and i cant shut down and i cant put in download mode
Galaxy Note 10 (SM-P605) with qualcomm. I downloaded this twrp-3.1.1-0-lt03ltexx.img from here https://twrp.me/samsung/samsunggalax...12014qcom.html.
odin gave pass ok and flashed it. now it is in loop and no button work. Battery can'0t be removed as it is inside the tablet. how can i solve - please help meeeeeeeeeeeeeeeeeeee
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance

You should still be able to get into Recovery or Fastboot mode. When it's bootlooping, just keep Vol+ or Vol- pressed. No need to press home button on the Note. Preferably you have TWRP installed, i don't know whether the Fastboot or Samsung recovery menu offer power-off as first solution.
When my Galaxy S5 froze last time, i was unable to perform a cold boot or shutdown, but these two keys worked, and you had to keep vol and menu pressed and to release power button when the boot screen comes up. Probably i just repeatedly failed on the cold boot/powerdown, though there was one key less to keep down. One the Note this would mean to keep just power pressed for around 10 seconds.

Help me to solve the problem
lecorbusier said:
You should still be able to get into Recovery or Fastboot mode. When it's bootlooping, just keep Vol+ or Vol- pressed. No need to press home button on the Note. Preferably you have TWRP installed, i don't know whether the Fastboot or Samsung recovery menu offer power-off as first solution.
When my Galaxy S5 froze last time, i was unable to perform a cold boot or shutdown, but these two keys worked, and you had to keep vol and menu pressed and to release power button when the boot screen comes up. Probably i just repeatedly failed on the cold boot/powerdown, though there was one key less to keep down. One the Note this would mean to keep just power pressed for around 10 seconds.
Click to expand...
Click to collapse
I have exactly the same tablet. I tried to install the twrp (no errors) through ODIN. After the installation of the Super Su I have seen that many services started to stop and the tablet was almost completely blocked. I removed Super Su (from the app) and when I restarted the tablet the nightmare has started too.
I read some advices regarding remove the battery (on other samsung smartphones) but this is a tablet so any help is appreciated.
Any idea? Even if I manage to have the screen with "a custom os can cause critical problems"..... if I try to push the volume + the loop starts againg
Hope someone can give me an answer

Unbrick by flashing stock rom via Kies or Odin, then TWRP via Odin, then Magisk via TWRP.

Pixel 3XL Black Screen - Still show in adb and have vibration

Google release Android 12 Dev Preview and i decide to sideload that on my 3xl device (It not my daily use device so it fine for me)
1) I connect the phone, use adb reboot recovery in ota intrucstion and the screen gone black
2) It not show in adb, not show anything in the screen. I use Power + Vol Down for a while, then it show on adb devices with Window add device sound
Current State: + Black screen
+ Have vibration
+ Receive charging and show on adb, i use some adb command to check and it have 100% battery
Case i think happen:
+ No battery, no boot up : I tried use adb command and it in 100%
+ Screen die, error (Hardware): I dont think that happen because it working fine for me and i not did any damage to it, just reboot it to recovery. I tried a type-c to hdmi and connect it to my monitor but it
not render anything
+ Some firmware problems: I not flash anything yet, just boot it to recovery so i dont think this case happen, i tried some method like hold power, hold power + vol down but not work
It really weird things for me, it is the first time i see a device working normally just gone to black screen by boot to recovery, non respond in screen (squeeze gesture and fingerprint still give vibration), not ringing by call.
Some note may useful: I tried hold power + vol down, then hold vol + while still hold these two button, some kind of strong vibration happen then everything still the same
I really looking forward to people have the same problems and solved it!

Surfaceflinger might have been corrupted, so the only thing you can do now is try to guess the key combination for bootloader, or just use adb to boot into bootloader mode. Then flash the latest factory image. That will hopefully fix it.

My device not have oem unlock option, so seem like enter bootloader to flash image is not possible
But i have some update, i used a tool https://github.com/Genymobile/scrcpy and i show my display
to my computer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I try to touch on screen, use button, ... and everything seem like work. Only the display not display anything, just the black screen. At this point, i think it because of hardware problems - sound like so weird because i just run the device to recovery by adb

[Help me]Xperia XA2 Brick I also don't know what the reason for this is

I use this phone normally to watch youtube, and use social apps, and he changed wallpaper without i do nothing, i try change to my wallpaper to normally, but he dont response, and i reset the phone and when turn on, stayed like this, i try format and no sucess, any have idea how to fix him ?

Hmmm...
Custom ROM or not, root or not?
Go into recovery mode and clear the cache.

ze7zez said:
Hmmm...
Custom ROM or not, root or not?
Go into recovery mode and clear the cache.
Click to expand...
Click to collapse
not custom rom and not root, in video i show recovery mode and i cant enter in android configuration

Go into recovery mode (with the device powered off, hold Volume Down + Power) and you see what options are available. I'm not suggesting anything because I don't know the device, but I'll hint when I see a screenshot in recovery mode.

ze7zez said:
Go into recovery mode (with the device powered off, hold Volume Down + Power) and you see what options are available. I'm not suggesting anything because I don't know the device, but I'll hint when I see a screenshot in recovery mode.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is recovery mode i turn on hold volume down and power, in this phone, he call "Security Mode" in my language, dont have options in screen

and i try turn on with hold volume up and power, one blue light appears and the phone dont response

HeenryL said:
this is recovery mode i turn on hold volume down and power, in this phone, he call "Security Mode" in my language, dont have options in screen
Click to expand...
Click to collapse
The image shows that the system booted into safe mode, not recovery mode. Can you check with the adb devices command how the phone connected to the PC responds?
Recovery mode looks like >this< video at 1:30.

ze7zez said:
The image shows that the system booted into safe mode, not recovery mode. Can you check with the adb devices command how the phone connected to the PC responds?
Recovery mode looks like >this< video at 1:30.
Click to expand...
Click to collapse
i try enter in recovery mode according to the video, he fixed in loop boot and use the ADB commands in CMD the phone dont response, just returning "waiting device", i buy new battery for my old phone to the fix him, will arrive in two days, I bought this xperia 2 months ago, its already broken its very sad for me, in my country this phone cost 2 salary, and sony dont offer oficial support here, i just put he in closet and forgget him, guy very very thanks so much to try help me, and your time too, thanks

try download the firmware with xperfirm later flash with newflasher but the newflasher files in firmware downloaded archive next cilck the newflasher exe and good luck i hope make a back up of yoru drm keys

sony xperia xa2 ultra stuck on dead battery and sony screen and wont go past them
so this morning in class I lightly dropped my phone from my hand onto the table lightly, and that was it, I had this phone for a while so its filled with stuff. Its stuck on loop on the Dead battery sign to the white sony screen and none of the...
forum.xda-developers.com