Related
I can get into download mode, but odin doesn't recognize, the only other screen i get too sdays "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again, but Kies cant connect to it, am i screwed? Please help this all happened from changing my screen density, i cant find anyway too restore, i'm not a noob and am in desperate help, i'm gonna be soo bummed if i brick, but i have a feeling if i can get too download mode, there must be a way too restore it.
BbbYou say no recovery, but you should have at least stock recovery I think. Try holding volume up and power, is you can get in, restore to stock from there.
If doesn't work I would start by reinstalling the drivers or try a different computer.
You'll be fine.
Also you should state you rom, what you did before, rooted, etc
Sent from my SPH-D710 using Tapatalk
I flashed the newest version of Roman BB's AOKP CM9 Kang and tried to change the density, i went too restore my nandroid and it froze before it finished, I tried odin and the first 2 times it recognized but both froze before the end. im kinda couch surfing so now i'm incredibally screwed without a phone, please help.
badname said:
BbbYou say no recovery, but you should have at least stock recovery I think. Try holding volume up and power, is you can get in, restore to stock from there.
If doesn't work I would start by reinstalling the drivers or try a different computer.
You'll be fine.
Also you should state you rom, what you did before, rooted, etc
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Roman bb's most updated AOKP, i changed the screen density and when i went to reboot it bootlooped, so i tried restoring a nandroid wich failed, tryed again, and now i cant get too recovery, i can only get too download mode, so i tried using odin too go back too stock, it failed almost at the end, twice, now i cant get odin to recognize my phone and it wont turn on, the only thing i can do is get too download mode, and too the thing saying use kies recovery, which does nothing because it won't connect. I'm at a total lost, i'm so scared i lost my only source of income, at this point in my life, if i dont have a phone, i dont have work or food or a warm place too sleep. Please anyone with any ideas please help.
I hate to be the one to tell you this but you're probably bricked. The giveaway is if you have problems in Odin at data.img:
http://forum.xda-developers.com/showthread.php?t=1504808
Will recommend that if you have further questions to post in that thread.
When going from ICS to anything else you should use ODIN to go back to stock. Anything else and you're risking a brick. More here:
http://forum.xda-developers.com/showthread.php?t=1525495
Hope this helps.
One quick question - which phone are you using and which usb cable for odin?
Be sure that using the original usb cable during odin.
kobridge said:
One quick question - which phone are you using and which usb cable for odin?
Be sure that using the original usb cable during odin.
Click to expand...
Click to collapse
I've never heard that one before. What do you think is unique about the stock micro-usb cable?
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
garwynn said:
I hate to be the one to tell you this but you're probably bricked. The giveaway is if you have problems in Odin at data.img:
http://forum.xda-developers.com/showthread.php?t=1504808
Will recommend that if you have further questions to post in that thread.
When going from ICS to anything else you should use ODIN to go back to stock. Anything else and you're risking a brick. More here:
http://forum.xda-developers.com/showthread.php?t=1525495
Hope this helps.
Click to expand...
Click to collapse
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
simple
TimidRat said:
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
Click to expand...
Click to collapse
use a different cable and uninstall drivers and reinstall reboot computer also
kobridge said:
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
Click to expand...
Click to collapse
Yeah now that you mention it I realized my nook color micro usb cable has a longer metal end-piece than my E4GT, and won't connect properly. I thought the length of the metal prong would have also been standardized. Go figure.
TimidRat said:
I flashed CM9. i went too restore my nandroid.
Click to expand...
Click to collapse
This is the problem unless you flashed a gb kernel/recovery first. You should not do anything in ICS recovery.
kobridge said:
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
Click to expand...
Click to collapse
Its true not all cables are the same, but the funny part is from the beginning of OG Epic days we figured out quick the only thing you should do with the stock cable is charge... its garbage. Maybe the new model is better, havent tried it, but it looked pretty much the same, thin little thing... I use my 4 year old BBerry cable, about as thick as a cat-5... never had an issue. But yeah, try new drivers, cable, diff PC, use a USB that is physically part of the Motherboard of the PC (desktop)... all these things help with the shoddy drivers, etc... you may get lucky...
TimidRat said:
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
Click to expand...
Click to collapse
But you said you did attempt a restore through CWM after the bootloop, correct? If you did and you're having problems you *may* have bricked. Using ODIN is a surefire way to confirm whether you did or not. If you didn't attempt anything through CWM while having CM9 installed then you may not be bricked but are obviously still having issues. As it has been said before - and quite often - CWM at your own risk; ODIN is believed to be the safest option.
Regardless, if you're having problems and the USB cable doesn't fix it I'll still recommend trying to get back to a GB stock ROM by ODIN. At the worst you've lost what you have done since the last backup, since you can restore that from the backup once you get back to GB. With so many bricked phones lately it may be best to err on the side of caution this time...
I've tried everything mentioned, except a different pc, i tried linux, on my pc odin doesntr recognize my phone, , but i just went and plugged a flash fdrive in so now im thinking my computer is having usb problems, so im gonna try another computer, i also made a usb jig to reset the odin counter too take it too sprint but it didnt work... i'm so confused and screwed without my phone. Thank you everyone for trying too help. Any more ides are greatly appreciated! Thanks soo much guys!
ive had this problem before and basically my phone would turn on but no signal sd card didnt work wouldent read in computer but if you cant get it to work and have fifty bucks u can go to mobiletechvideos.com and it will take about mabe 3-4 days mine took a week since i sent on a friday but it costs fifty bucks and the only thing when i came back that wasnt working 100% was the picture gallery. true him if it comes down to it
Well, since you're getting the firmware upgrade error, I'm gonna bet your phone is bricked. That happened to me, I finally took it to the Spring repair center and they couldn't fix it, so they swapped my phone out.
Sent from my Zack Morris brick phone
blackroseMD1 said:
Well, since you're getting the firmware upgrade error, I'm gonna bet your phone is bricked. That happened to me, I finally took it to the Spring repair center and they couldn't fix it, so they swapped my phone out.
Sent from my Zack Morris brick phone
Click to expand...
Click to collapse
Yup that's what theyre doing for me, i'll get it tomorrow or tuesday, cant complain too much im gonna get one with no scratches.
Thank you everyone who replied, im set egtting my new one, im gonna try and swindle kepping the bricked one cause im sure it could be of major use too a dev....
Sprint Epic 4G Touch Appears Bricked
My Sprint Samsung Galaxy S II Epic 4G Touch will no longer connect to my computer (also tried another computer and different usb cable), after a failed attempt to upgrade to ICS 4.0. The phone will not load up now to 'normal' operating mode.
It will only come up to the message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I can no longer get into Recovery or Download modes. At least none that work. (See below)
I also built and tried the USB jig solution, which does power on the phone, but it then comes up and says:
FACTORY MODE
PRODUCT NAME" GT-19100
CUSTOM BINARY DOWNLOAD: YES (2 counts)
CURRENT BINARY: SAMSUNG OFFICIAL
Downloading...
Do not turn off target!!
But connecting to my PC still fails. Any ideas?
Hello XDA!
I don't want to post a wall of text (not that tall of a wall, at least), so, I'll try to get to the point quickly. And yes, I have done a lot of searching, both on XDA and Google, and that will be proved soon enough with the solutions that I've tried so far.
The problem I'm currently experiencing is when I connect my phone to my computer, it charges but it isn't recognized. There is no USB notifications, no phone in My Computer, and no Windows pop up, whether it's a pop up asking me to install drivers or an unknown device has been connected, nothing. Mind you, everything has been working flawlessly, this just randomly, and I really do mean randomly, started happening. The phone has never been dropped and there is no water damage. I'm still using the USB cable that came with the phone. And, if it matters, I'm rooted, running the leaked LI8 JB ROM, stock kernel, and UVLEM baseband.
Here's a list of said solutions that I've tried so far:
Using a thin paint brush, wet the tip a little with alcohol and tried cleaning out the USB port
Connecting to a different computer, connecting with a different cable, connecting to any other USB ports on the computer
After making Nandroid backup: Data wipe/factory reset, flashing a different ROM
Remove Samsung USB drivers and reinstalling, also tried installing Samsung Kies
Uncheck USB debugging and restarting, checking USB debugging and restarting
Dialled *#7284#, select Modem, then reselect PDA, changing Qualcomm USB settings and changing it back to MTP + ADB
Turn off phone, remove battery for 30 sec, reinsert and boot up (soft reset to reset internal circuitry as described by a Samsung live chat service tech)
I might've left out a couple, but please do enlighten me of methods that you might know, I'll be sure to try it or let you know if it's already been attempted.
..also, when connected to my PC, under Settings > Battery, it shows "Charging (AC)" IIRC, this should be showing "Charging (USB)".
This next attempt stood out to me. I decided I would try and go back to the stock firmware, one where I would have to use Odin3. So, I put the phone in Download Mode, open up Odin3, connect the phone, and I get a pop up in Windows! It's trying to install drivers, and fails. I can't flash the stock Samsung firmware if I wanted to, even for warranty purposes. I do currently have the USB drivers installed, but my PC hasn't gone through the driver installation for when the phone is connected to the computer. So, I'm assuming that is why this is failing? I'm not entirely sure. But, when I saw this, I unplug the phone and plug it back in numerous times, to rule out that this might be a hardware problem. And, every time I plug it back in, it tries to install the drivers but fails. So, it's detecting my phone in Download Mode. I reboot and hope that it will detect normally, but no, it doesn't...
As a last resort, I went to Samsung.com and chatted with a service tech, he runs me through two procedures that I haven't done, the 'soft reset' and a 'master reset', which is done through Settings > Back up and Reset > Factory Data Reset. Neither worked, so, he then checks my IMEI and finds that I am still under the 1 year warranty and files a ticket for repair service. I asked him if there is a replacement warranty and he says that is done through my service provider (T-Mobile) with the Premium Handset Protection service, which I didn't add. Not because I didn't want to, but I can explain in later posts if someone is interested in why it wasn't added. So, now I have the return label in my inbox ready to be printed, taped onto a box containing my phone, and sent out. But, I can't go through with this because I have a custom ROM on the phone. There is no counter because I've already used Triangle Away, AFTER this started happening.
I am completely stumped... Any information is greatly appreciated!
EDIT: Also, I've disassembled the phone to check the MicroUSB port to see if any pins or prongs might've came loose. Everything is in tact.. I also wanted to see if the MicroUSB port was replaceable because I was able to find a spare MicroUSB ports on a website. But, it seems that the port isn't easily replaceable. It doesn't look removable, and I'm uncertain if it can be de-soldered to solder a replacement one on. Also, some thing caught my eye when I had it disassembled. There were two components of the phone that had SGH-I747 imprinted on them. I wasn't able to take pictures as I was in a rush to get it put back together, but thought it was of interest to bring up.
How do you have a custom ROM if you flashed the stock one? I'm confused..
Try installing drivers through the toolkit.
If windows recognized it in Download Mode, keep trying to unplug and replug the cable in the same and different ports until it installs?
This happened once on my Galaxy S 4G.
Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
http://d-h.st/zya
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app
psykhotic said:
How do you have a custom ROM if you flashed the stock one? I'm confused..
Try installing drivers through the toolkit.
Click to expand...
Click to collapse
I was never able to flash the stock firmware because my computer fails to install drivers for it. I've also tried using the drivers from the toolkit and it gave me no results.
theexel said:
If windows recognized it in Download Mode, keep trying to unplug and replug the cable in the same and different ports until it installs?
This happened once on my Galaxy S 4G.
Click to expand...
Click to collapse
I just hopped on right now after trying the different USB ports on my computer while in Download Mode. Same deal, it detects, tries to install drivers, then fails. It's coming up as an Unknown Device.
DocHoliday77 said:
Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I currently have the latest Kies installed. I'm going to uninstall and give that link a shot, though. Hopefully, Odin3 will be able to detect it, at least, so I can get the stock firmware back on this thing...
DocHoliday77 said:
Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
No luck with those drivers neither..... =/
What version of Windows are you running?
Aerowinder said:
What version of Windows are you running?
Click to expand...
Click to collapse
Windows 7 x64
I had the same problem. Tried uninstalling and and reinstalling drivers. Only thing that worked was restoring my pc to factory condition and starting over. Sucked but it worked
Sent from my SGH-T999 using xda premium
jasonpantuliano said:
I had the same problem. Tried uninstalling and and reinstalling drivers. Only thing that worked was restoring my pc to factory condition and starting over. Sucked but it worked
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thank you for your input, but I doubt this would work in my situation. Ive tried connecting it to my laptop and another computer in the house and they both do not detect the phone. However, i would consider going that route as a last resort if there arent any other ideas.. i just need Odin3 to recognize it so i can revert and send it back in..
Any other suggestions, XDA? And thank you to those that responded!
johnx818 said:
Thank you for your input, but I doubt this would work in my situation. Ive tried connecting it to my laptop and another computer in the house and they both do not detect the phone. However, i would consider going that route as a last resort if there arent any other ideas.. i just need Odin3 to recognize it so i can revert and send it back in..
Any other suggestions, XDA? And thank you to those that responded!
Click to expand...
Click to collapse
I had the same issue. Got my phone replaced and it worked fine.
eldgrim said:
I had the same issue. Got my phone replaced and it worked fine.
Click to expand...
Click to collapse
And that is exactly what im trying to do..
So the short question is if there is any way for me to get root without a working usb port?
Last week I plugged in to charge my phone overnight with the phone off. In the morning, I was surprised to find that the screen was on and what should have been a full green battery was instead a scrambled image that kind of looked like a battery. I powered on the phone and it worked so I thought nothing of it but later on that night I needed to pull a file off my phone via usb and realized that the phone will no longer detect the usb host, ie. no mtp options whatsoever. It at least does still charge.
Since then I have tried cleaning the usb connector, pulling the battery/sim, setting the UART using *#7284#(PDA, mtp+adb), multiple computers, and multiple cables(including the Samsung one) and the phone still doesn't ever think its connected to a host. So today I decided to use my php warranty service which meant I had to restore stock recovery and rom. So I grabbed mobile odin and a stock UVLDJA image. Ran Triangle away once to clear the counter, and another time to verify it was at zero, and installed the full image via mobile Odin. When the phone booted back up, it successfully installed the rom only the flash counter is back at one and now I have lost root. If I had used my head I should have flashed just the recovery first but I wasn't thinking....
Any suggestions on how to get root back? I read these forums quite a bit and I am thinking that I am SOL but hoping maybe someone has a suggestion I haven't seen yet.
Dlkiser said:
So the short question is if there is any way for me to get root without a working usb port?
Last week I plugged in to charge my phone overnight with the phone off. In the morning, I was surprised to find that the screen was on and what should have been a full green battery was instead a scrambled image that kind of looked like a battery. I powered on the phone and it worked so I thought nothing of it but later on that night I needed to pull a file off my phone via usb and realized that the phone will no longer detect the usb host, ie. no mtp options whatsoever. It at least does still charge.
Since then I have tried cleaning the usb connector, pulling the battery/sim, setting the UART using *#7284#(PDA, mtp+adb), multiple computers, and multiple cables(including the Samsung one) and the phone still doesn't ever think its connected to a host. So today I decided to use my php warranty service which meant I had to restore stock recovery and rom. So I grabbed mobile odin and a stock UVLDJA image. Ran Triangle away once to clear the counter, and another time to verify it was at zero, and installed the full image via mobile Odin. When the phone booted back up, it successfully installed the rom only the flash counter is back at one and now I have lost root. If I had used my head I should have flashed just the recovery first but I wasn't thinking....
Any suggestions on how to get root back? I read these forums quite a bit and I am thinking that I am SOL but hoping maybe someone has a suggestion I haven't seen yet.
Click to expand...
Click to collapse
Checking your flash counter in TA trips your counter, that's why it's at 1. Use mobile Odin to flash root66 to get rooted again.
Sent from my SGH-T999 using Tapatalk 2
Towle said:
Checking your flash counter in TA trips your counter, that's why it's at 1. Use mobile Odin to flash root66 to get rooted again.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Ok, thanks for the explanation on the counter. Don't I need root already to run mobile Odin?
Dlkiser said:
Ok, thanks for the explanation on the counter. Don't I need root already to run mobile Odin?
Click to expand...
Click to collapse
Oh, duh! Yes lol you do. There would be no other way. Have you tried a factory reset then try to connect your phone? You could also try to install Kies on your PC to make sure all drivers are correctly installed.
If you wouldn't have said you have tried other cables, I would have for sure thought defective cable. Some cables are also charge only.
Sent from my SGH-T999 using Tapatalk 2
Towle said:
Oh, duh! Yes lol you do. There would be no other way. Have you tried a factory reset then try to connect your phone? You could also try to install Kies on your PC to make sure all drivers are correctly installed.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, did the factory reset along with all of the other suggestions I could find. I typically try to avoid Kies and since I cannot even get the device to enumerate I'm pretty sure it's not driver related.
I think my only hope would be getting root or twrp intalled via stock recovery or adb over wifi.
Thanks, I appreciate the help.
download Odin3 v1.85
Put your phone in download mode (vol down=menu=power then after the screen comes up press vol up
plug the phone usb to the computer,
run odin
the first box on the top left should have a colored highlight (the ID:COM )
if that pops up, your phone is 99% functioning correctly, and only problem is in your computer.
When trying do do a regulad usb transfer to the computer:
I have noticed, sometimes I have to connect, wait a bit (like maybe 2 minutes)
then disconnect the cable for about 15 sec then connect again, and it pops up after a minute
you could also try this:
open explorer on the computer(double click on my computer) and see if there is a t999 in your left pane. Sometimes the autorun function in the
computer gets farkled and it does not open automatically and you have to do it manually,
Good luck & Aloha !
Go to galaxys3root.com and follow his t.mobile root tutorial WORD FOR WORD. USE THE USB THE PHONE CAME WITH AND KILL SAMSUNG KIES. also run Odin before you connect the phone to Pc, should be no problem bruh once it took me a couple of hours making love to my comp before I got a colored com box. And use a windows PC Mac suxx for this kind of.
Sent from my SGH-T999
I've basically given up trying to get the usb port working... I am convinced this is a hardware issue. Nothing shows up in the device manager when I plug in the phone whether USB debugging is on/off or I am in normal mode or download mode. The phone will never bring up the MTP options in the notification bar either. Again this is with multiple cables on 2 different comps where it used to work just fine. I think whatever bad charge experience I had last week damaged the USB host controller on the phone.
I think what looks promising now is using adb over wifi(http://forum.xda-developers.com/showthread.php?p=26844535) along with root via adb(http://galaxys3root.com/galaxy-s3-root/how-to-root-u-s-canadian-dual-core-galaxy-s3-on-mac-osx/). I can't do this at work but I'll follow up tonight on what will hopefully be success in case this could help someone else out.
Edit: Ugh, some quick googling shows that I need either root or working USB to make adb over wifi work.
Would you want to replace your chatging port?
Sent from my SGH-T999
AppzTheGawd said:
Would you want to replace your chatging port?
Sent from my SGH-T999
Click to expand...
Click to collapse
I don't think so.... the micro usb port is mounted on the main board and short of replacing that entire board it would be a ton of time/effort for something that I don't exactly think is the problem.
Dlkiser said:
I've basically given up trying to get the usb port working... I am convinced this is a hardware issue. Nothing shows up in the device manager when I plug in the phone whether USB debugging is on/off or I am in normal mode or download mode. The phone will never bring up the MTP options in the notification bar either. Again this is with multiple cables on 2 different comps where it used to work just fine. I think whatever bad charge experience I had last week damaged the USB host controller on the phone.
Click to expand...
Click to collapse
This happened to me, and it was from using different devices in the same port (with same cable). I switched ports and it worked. Might not work for you, but worth a mention - it really stumped me and I tried everything including restoring the OS to an earlier point.
Sent from my SGH-T999 using xda app-developers app
Dlkiser said:
I don't think so.... the micro usb port is mounted on the main board and short of replacing that entire board it would be a ton of time/effort for something that I don't exactly think is the problem.
Click to expand...
Click to collapse
Now that S3's are getting older, more people will be losing their functional USB ports. I found holding the phone vertically with steady even pressure on the plug was the trick to getting a solid connection on my flaky port, at least enough to get stock back (to send it back). That was the longest 15 minutes of my life (OK, not, but it was in the top 10, mostly because it was simultaneously nerve-wracking and insanely boring).
I tried de-soldering a usb port on a Galaxy S. Yeah.... To say it mildly, the way Samsung sets them up is booby-trapped. You can't get the existing silver solder hot enough to melt without toasting the board somehow. The boards are also wafer-thin and dimensional on both sides. Despite generally having a knack for fine tuning and detail work (thanks to estrogen or something), I felt like an ogre in a doll house. I definitely would suggest having all the (exactly) right tools in place before tackling it. Even then it might not be the port itself, but something between the actual port and the other components.
One other thing to note, Mobile Odin is an amazing tool, but it's even ***more crucial*** than regular Odin to get your ducks in a row before you flash. Know exactly what you are flashing what your next steps are, and what your results are supposed to be. One thing in particular: if you flash a stock ROM, it includes stock recovery, and you will lose root. make sure you've run Triangle Away before you flash stock (which won't trigger your counter, but anything else will).
I plan to keep the Triangle Away and Mobile Odin apk's ready on ExtSD to install, and a copy of a stock image (ROM) as well, from now on, on all my phones. You never know when that port is going to give up the ghost.
Just thought I'd add a couple things here. More times than not, when someone thinks their usb port on the phone is bad, it's actually just the cable. Even if the cable works on something else, or works to charge the phone. They ruin much, much, more easily than anyone wants to believe! Especially when you plug/unplug it as often as with a phone.
As for Mobile Odin, I fully agree! It's one of my favorite apps by far! But if you're going to keep stock firmware handy, which I highly recommend, you may as well keep the root66 version. Flash back with that, then run triangle away, then in SuperSU, choose full unroot. Then all you need is a factory reset. Making TA the last step makes for far fewer user mistakes.
Sent from my SCH-I535 using Tapatalk 4
My wife has a T-Mobile GSII. I successfully rooted it via ODIN to CWM-SuperSU-v0.87. My wife wanted me to put it back to stock so I unrooted it to T989UVLE1. It was killing the battery (and some other weird things began happening) so I want to re-root it but now the USB port is not working so I can't ODIN it back to the rooted MOD.
When I plug in the USB cable connected to my PC it charges but it doesn't connect for data. My computer doesn't see it, and it doesn't show the USB icon in my notifications on the phone either. When I try to boot to recovery, it goes into download mode (even if it's not connected to a USB cable). ODIN doesn't see that it's connected so I can't change the ROM.
Now, I also have the SGH-T989 and used this same process successfully. When I connect it to the same PC with the same cable I can do anything I want, ODIN works, I can get to recovery mode when it's not plugged into a USB. It's as if my wife's phone thinks it's connected to a USB even though it's not and when it is connected it doesn't recognize it. I'm thinking I could send it in for warranty figuring the USB port is dead but the ROM that's on there isn't stock and I'm afraid I'll get into hot water with TMO. For grins, I uninstalled all of my Samsung drivers and reinstalled them, and did the same thing with Kies. My phone connects fine, my wife's doesn't at all.
Anyone have a good idea? I've looked around on here all day and can't find anything that will work for me.
Once you Odin back to stock on your wife's phone you lost the recovery. Use [URL="https://www.dropbox.com/s/jdfj55rcj6p5c7c/odin3%20v1.85.exe]this version of Odin[/URL].
Remove battery
Open Odin (the one I provided)
Put battery back in after about 20 seconds
Hold volume up and volume down
Connect phone to computer via USB
Download mode should pop up on the phone and Odin should recognize your phone
After that just Odin a recover onto her phone and flash supersu to root
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Problem with your link...
The ODIN in your post doesn't lauch an ODIN session. Instead I get a dialog box that says, "Odin3.ini" and then seven boxes with an OK button. Now I'm really baffled.
stecina said:
The ODIN in your post doesn't lauch an ODIN session. Instead I get a dialog box that says, "Odin3.ini" and then seven boxes with an OK button. Now I'm really baffled.
Click to expand...
Click to collapse
Sorry about that man. That was my faul, the dialogue means you need the ini file for Odin. I've reuploaded everything in a zip file here. Just unzip to your desktop and follow the same steps I provided earlier.
*note* the zip file includes the two Odin files you need...just open Odin.exe. A recovery tar file and a superuser zip file...the superuser zip I provided outdated so just use your root zip file.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Didn't Work
Okay, so that returned the same result as before. Your method also didn't make my computer (or ODIN) think it was connected to anything, so I'm unable to get the root onto the phone.
What can I try next?
stecina said:
Okay, so that returned the same result as before. Your method also didn't make my computer (or ODIN) think it was connected to anything, so I'm unable to get the root onto the phone.
What can I try next?
Click to expand...
Click to collapse
You can try reinstalling the drivers. If you don't have them you can download it here. Just run the exe file. Also if you have Samsung kies on your computer that could be causing the interference so remove it
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I have uninstalled and reinstalled drivers as well as Kies. Remember, I have another phone of the same model that is easily recognized by my computer AND ODIN. I'm pretty sure there is something wrong with my wife's USB port. That's why I want to restore it to stock, so I can get a warranty replacement.
Sent from my SGH-T989 using xda app-developers app
stecina said:
I have uninstalled and reinstalled drivers as well as Kies. Remember, I have another phone of the same model that is easily recognized by my computer AND ODIN. I'm pretty sure there is something wrong with my wife's USB port. That's why I want to restore it to stock, so I can get a warranty replacement.
Click to expand...
Click to collapse
There is a flashable stock zip on the first post here:
http://forum.xda-developers.com/showthread.php?t=1858435
Scroll down to T-Mobile t989 UVLH1 and click show content. It's at the bottom.
---------- Post added at 11:59 PM ---------- Previous post was at 11:45 PM ----------
meekrawb said:
There is a flashable stock zip on the first post here:
http://forum.xda-developers.com/showthread.php?t=1858435
Scroll down to T-Mobile t989 UVLH1 and click show content. It's at the bottom.
Click to expand...
Click to collapse
After re-reading your OP I see you can't even get into recovery. I don't think there is anything you can do but take it to T-Mobile and hope for the best. Or send it to Samsung...
Have you tried using a PC which you have not used for flashing your own?
I realize its unlikely to make a difference, but trying to flash your wifes using a "virgin" PC is at least worth a shot...
Chris
Another thing you could try is disconnect the phone from the PC (leave it powered up and everything), load up device manager in windows then plug the phone in and watch for device manager to flicker or do anything. I'm thinking maybe your phones are the same (T989's) but possibly a different revision that requires a different driver. Device manager will tell you if the phone was able to start or not. One thing that SOMETIMES works with windows computers (although it sounds silly) is to use a different USB port. I always use the one on the back of my computer as it is directly connected to the motherboard and thus offers a shorter path for the data to travel. I have had issues using front USB ports with devices before (my MP3 player will time out during large data transfers if I use the front USB port sometimes).
Also, is "debug mode" turned on on your phone? It is under development tools. If it is off, try turning it on. And with it on, do you get any results from running "adb devices" (presuming you have the android SDK installed or a copy of adb floating around on your computer from some other tools)?
And lastly, does the phone charge when the USB cable is plugged in? It is unlikely that 2 of the pins on the USB connection are bad without them all being bad.
Good Ideas!
Well, I've tried a couple of those ideas. The Device Manager idea revealed nothing. Nothing changes in the Device Manager when I plug in the phone. The phone DOES charge, so like you said, it's likely a software issue not hardware since two of the pins seem to work fine. BTW- the phone acknowledges it has been plugged in, too, by beeping. The computer does not.
I had tried using different computer USB ports because I have found the same to be true as you: the ports on the back go directly to the motherboard but the ones on the front are actually going through a hub, though it's inside the case, the computer sees it as a hub.
I don't have ADB Devices. I don't have any experience with that program...can you advise me? Next up, trying on a virgin computer...
Thanks for the ideas. I've got to get this worked out or my wife's going to DIE. Currently, the home button doesn't take her home, it takes her to this weird Clock App based lock screen/screen saver. Anyone have an idea how to correct that problem itself?
UPDATE: I tried to install and run ADB Devices and it didn't result in recognition by my computer.
Sending in For Warranty
It appears that this is my problem.
I took it to TMO and they approved a warranty replacement for a faulty USB port. Just in case anyone wondered.
Long time listener first time caller (this is my first post here) I'm going to try not to leave out any details. Bear with me.
I rooted my Tmobile Galaxy s3 for the first time and installed CM10.1. It was great for a few months, then it started getting glitchy. So I would flash the nightly release and it would be fine for a while. I decided to unroot and start fresh. It was then that I discovered the PC wouldn't recognize the device. I followed a youtube tutorial to unroot with Mobile Odin. I extracted and flashed a stock image called Tmobile_GS3_SGH-T999_4.0.4 after clearing counter with Triangle Away.
Well it seemed to go well, unrooted my device, but now the OS is incomplete. No internet app, messaging won't work at all, and it keeps crashing and freezing. The usb port is still not working so I cannot root with my computer, and the flash counter still says 1 and status says modified.
Tmobile sent me a new one on warranty, but I'm really worried they're gonna charge me 500 bucks because it's "modified". I have a few days before I have to send it back, Is there anyway that I can fix this without connecting it to my computer? Any help is GREATLY appreciated.
Thanks
re: flashing stock rom.
empire-1 said:
Long time listener first time caller (this is my first post here) I'm going to try not to leave out any details. Bear with me.
I rooted my Tmobile Galaxy s3 for the first time and installed CM10.1. It was great for a few months, then it started getting glitchy. So I would flash the nightly release and it would be fine for a while. I decided to unroot and start fresh. It was then that I discovered the PC wouldn't recognize the device. I followed a youtube tutorial to unroot with Mobile Odin. I extracted and flashed a stock image called Tmobile_GS3_SGH-T999_4.0.4 after clearing counter with Triangle Away.
Well it seemed to go well, unrooted my device, but now the OS is incomplete. No internet app, messaging won't work at all, and it keeps crashing and freezing. The usb port is still not working so I cannot root with my computer, and the flash counter still says 1 and status says modified.
Tmobile sent me a new one on warranty, but I'm really worried they're gonna charge me 500 bucks because it's "modified". I have a few days before I have to send it back, Is there anyway that I can fix this without connecting it to my computer? Any help is GREATLY appreciated.
Thanks
Click to expand...
Click to collapse
First thing to do is to put the phone into DOWNLOAD mode to TEST it and see if ODIN will recognize it.
If Odin recognizes it then there is NO need to send it back to Samsung, all it needs is a proper Odin flash.
Just because when all those missing apps and the usb had issues it does not necessarily mean that Odin will not recognize the phone.
If your computer is not working or you don't have a windows computer find a relative or a friend who has one.
Even a laptop computer would do just fine.
Good Luck!
Tried that
Thanks for your response, I have tried connecting it to Odin in download mode and it still will not see it. I really don't know what the problem could be. the usb used to work fine and there has been no physical damage.
re: try this.
empire-1 said:
Thanks for your response, I have tried connecting it to Odin in download mode and it still will not see it. I really don't know what the problem could be. the usb used to work fine and there has been no physical damage.
Click to expand...
Click to collapse
Try a different usb cable and or plug usb into different port,
if that fails, re-install the Samsung usb drivers for the phone.
Remember, if the phone goes into download mode 99.999% of the time the phone
can be flashed successfully using Odin.
The main reasons for usb issues in "download mode" are either loose connection to computer's usb ports,
usb cable intermittant or the Samsung usb drivers in the computer are corrupted in one way or another.
Thanks again
I guess I should have put this in my first post. I have tried 2 different cables in every port on 2 different computers. I have re installed the drivers multiple times as well. Also the new phone they sent me is recognized just fine.
empire-1 said:
I guess I should have put this in my first post. I have tried 2 different cables in every port on 2 different computers. I have re installed the drivers multiple times as well. Also the new phone they sent me is recognized just fine.
Click to expand...
Click to collapse
You are in a tough spot. I don't know if you have the stock recovery or not but if not you can either download the stock rom on the phone again...you know the best way although unethical really...being that the usb port is down is to re root it and flash a rom like the gt 1300 or whatever the international version is and intentionally hard brick your phone. Hard brick meaning won't even turn on withOut jtag and that even just clears everything out and reloads software like from the factory.If the phone won't boot up then there's no way for the person to tell its been modified. Majority of the time samsung doesn't get the damaged phones its some idiot making 8 bucks an hour to refurbish phones. That's what I would suggest you do being that the counter is still saying one flash
tmobile s3 running wicked. best rom i've ever used
Pretty sure I'm on stock recovery. it does give me an option to "apply update from external storage"
Thanks for all your help, I'll try to flash the stock rooted rom through the stock recovery although i'm not optimistic.
I will check out the wicked rom you mentioned, although I am a little hesitant to root my new one after this ordeal.
but how do I re root it if I have no usb or custom recovery?
re: flashing
empire-1 said:
but how do I re root it if I have no usb or custom recovery?
Click to expand...
Click to collapse
If you can get your phone to boot normally with any stock rom rooting will not be a problem at all.
If you get the phone working and booting properly you would be very lucky but from reading
everything you have wrote so far I highly doubt that you can successfully flash any rom at all
unless you have forgotten to tell us something.
Don't worry about rooting, worry about getting the phone to boot and work properly with stock rom.
yep. running stock recovery. hopeless?
re: flashing
empire-1 said:
yep. running stock recovery. hopeless?
Click to expand...
Click to collapse
I never said a word about stock recovery, I said STOCK ROM.
Invest in a JIG, it puts your phone into download mode instantly even if you cannot
do it manually with the three buttons as long as the phone is not completely dead.
You can buy a jig for less than $4.00 shipped on eBay, it's great little tool.
All you do is remove the battery from the phone and put it back in then simply plug
the jig into the usb port then in a couple seconds it will be in download mode then you
can unplug the jig and the phone is ready to be odin flashed..
Remember what I said before, just because the usb did not work with some
rom you flashed it does not mean that it will not work for download mode.
The jig was one of the best investments I have made when I started using these samsung android phones.
Once in download mode it will allow you flash the stock or stock rooted Jellybean 4.1.1 rom.
This is my best advice.
I am not having a problem getting into download mode, I will take your advice and buy a jig though in case I ever need it. Again, thanks for all your help, I think I may have to send it back and hope for the best.
re: flashing
empire-1 said:
I am not having a problem getting into download mode, I will take your advice and buy a jig though in case I ever need it. Again, thanks for all your help, I think I may have to send it back and hope for the best.
Click to expand...
Click to collapse
Before sending it back, if I were you I would find a friend or family member who has
a windows computer and just for the hell of it install the usb drivers in the computer
just to see for sure that while in download mode and connected usb cable if Odin still
is not lighting up the [COM:xx] top left rectangle on Odin screen.
I have odin flashed many phones dozens of times in the past 3 years and I have yet
to come accross one which goes into download mode but odin is not reconized
unless there is something wrong with the windows computer or usb ports and drivers.
That only happens as I said before, if there is something wrong with the drivers,
usb ports and or usb cables or some other malfunction in the windows computer.
Just think, if it works no need send the phone to samsung plus you would have learned
something too.
I did try my other computer with the same results, tomorrow I will try it with my girlfriends laptop, I am starting to think something happened to the usb jack. It didn't work before I unrooted it either, that's why I used Mobile Odin. I am all about learning this stuff though. I plan to root every new phone I get, this has just been a little frustrating.
re: well that's it!
empire-1 said:
I did try my other computer with the same results, tomorrow I will try it with my girlfriends laptop, I am starting to think something happened to the usb jack. It didn't work before I unrooted it either, that's why I used Mobile Odin. I am all about learning this stuff though. I plan to root every new phone I get, this has just been a little frustrating.
Click to expand...
Click to collapse
This is the first I heard that the usb did not work before and the usb socket might be broke.!!!
In that case since you cannot use the Wifi in your phone to transfer and install apps since it cannot boot normally
(unless I am missing something again) and you cannot use usb and it would not even help to remove the external
sd and copy any apps at all since you would have no way to install the apps.
Then you are right, you have to send it back, exchange it and hopefully you can come up
with a good enough excuse why it's not working so samsung will not charge anything )which I doubt)
I must not have been clear, I can use the phone. it makes calls, the wifi works, i can use third party messaging and browser apps. again, there has been no physical damage. the socket worked a few weeks ago when I rooted it. I only noticed it not working when I went to unroot it.
So basically it sounds like there is no way to root or install custom recovery without usb, correct?
empire-1 said:
I must not have been clear, I can use the phone. it makes calls, the wifi works, i can use third party messaging and browser apps. again, there has been no physical damage. the socket worked a few weeks ago when I rooted it. I only noticed it not working when I went to unroot it.
So basically it sounds like there is no way to root or install custom recovery without usb, correct?
Click to expand...
Click to collapse
I don't know of any way unfortunately
tmobile s3 running wicked. best rom i've ever used
Josh McGrath said:
I don't know of any way unfortunately
tmobile s3 running wicked. best rom i've ever used
Click to expand...
Click to collapse
Can you flash it through mobile odin? I don't know anything about the mobile version.
tmobile s3 running wicked. best rom i've ever used