My wife has a T-Mobile GSII. I successfully rooted it via ODIN to CWM-SuperSU-v0.87. My wife wanted me to put it back to stock so I unrooted it to T989UVLE1. It was killing the battery (and some other weird things began happening) so I want to re-root it but now the USB port is not working so I can't ODIN it back to the rooted MOD.
When I plug in the USB cable connected to my PC it charges but it doesn't connect for data. My computer doesn't see it, and it doesn't show the USB icon in my notifications on the phone either. When I try to boot to recovery, it goes into download mode (even if it's not connected to a USB cable). ODIN doesn't see that it's connected so I can't change the ROM.
Now, I also have the SGH-T989 and used this same process successfully. When I connect it to the same PC with the same cable I can do anything I want, ODIN works, I can get to recovery mode when it's not plugged into a USB. It's as if my wife's phone thinks it's connected to a USB even though it's not and when it is connected it doesn't recognize it. I'm thinking I could send it in for warranty figuring the USB port is dead but the ROM that's on there isn't stock and I'm afraid I'll get into hot water with TMO. For grins, I uninstalled all of my Samsung drivers and reinstalled them, and did the same thing with Kies. My phone connects fine, my wife's doesn't at all.
Anyone have a good idea? I've looked around on here all day and can't find anything that will work for me.
Once you Odin back to stock on your wife's phone you lost the recovery. Use [URL="https://www.dropbox.com/s/jdfj55rcj6p5c7c/odin3%20v1.85.exe]this version of Odin[/URL].
Remove battery
Open Odin (the one I provided)
Put battery back in after about 20 seconds
Hold volume up and volume down
Connect phone to computer via USB
Download mode should pop up on the phone and Odin should recognize your phone
After that just Odin a recover onto her phone and flash supersu to root
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Problem with your link...
The ODIN in your post doesn't lauch an ODIN session. Instead I get a dialog box that says, "Odin3.ini" and then seven boxes with an OK button. Now I'm really baffled.
stecina said:
The ODIN in your post doesn't lauch an ODIN session. Instead I get a dialog box that says, "Odin3.ini" and then seven boxes with an OK button. Now I'm really baffled.
Click to expand...
Click to collapse
Sorry about that man. That was my faul, the dialogue means you need the ini file for Odin. I've reuploaded everything in a zip file here. Just unzip to your desktop and follow the same steps I provided earlier.
*note* the zip file includes the two Odin files you need...just open Odin.exe. A recovery tar file and a superuser zip file...the superuser zip I provided outdated so just use your root zip file.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Didn't Work
Okay, so that returned the same result as before. Your method also didn't make my computer (or ODIN) think it was connected to anything, so I'm unable to get the root onto the phone.
What can I try next?
stecina said:
Okay, so that returned the same result as before. Your method also didn't make my computer (or ODIN) think it was connected to anything, so I'm unable to get the root onto the phone.
What can I try next?
Click to expand...
Click to collapse
You can try reinstalling the drivers. If you don't have them you can download it here. Just run the exe file. Also if you have Samsung kies on your computer that could be causing the interference so remove it
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I have uninstalled and reinstalled drivers as well as Kies. Remember, I have another phone of the same model that is easily recognized by my computer AND ODIN. I'm pretty sure there is something wrong with my wife's USB port. That's why I want to restore it to stock, so I can get a warranty replacement.
Sent from my SGH-T989 using xda app-developers app
stecina said:
I have uninstalled and reinstalled drivers as well as Kies. Remember, I have another phone of the same model that is easily recognized by my computer AND ODIN. I'm pretty sure there is something wrong with my wife's USB port. That's why I want to restore it to stock, so I can get a warranty replacement.
Click to expand...
Click to collapse
There is a flashable stock zip on the first post here:
http://forum.xda-developers.com/showthread.php?t=1858435
Scroll down to T-Mobile t989 UVLH1 and click show content. It's at the bottom.
---------- Post added at 11:59 PM ---------- Previous post was at 11:45 PM ----------
meekrawb said:
There is a flashable stock zip on the first post here:
http://forum.xda-developers.com/showthread.php?t=1858435
Scroll down to T-Mobile t989 UVLH1 and click show content. It's at the bottom.
Click to expand...
Click to collapse
After re-reading your OP I see you can't even get into recovery. I don't think there is anything you can do but take it to T-Mobile and hope for the best. Or send it to Samsung...
Have you tried using a PC which you have not used for flashing your own?
I realize its unlikely to make a difference, but trying to flash your wifes using a "virgin" PC is at least worth a shot...
Chris
Another thing you could try is disconnect the phone from the PC (leave it powered up and everything), load up device manager in windows then plug the phone in and watch for device manager to flicker or do anything. I'm thinking maybe your phones are the same (T989's) but possibly a different revision that requires a different driver. Device manager will tell you if the phone was able to start or not. One thing that SOMETIMES works with windows computers (although it sounds silly) is to use a different USB port. I always use the one on the back of my computer as it is directly connected to the motherboard and thus offers a shorter path for the data to travel. I have had issues using front USB ports with devices before (my MP3 player will time out during large data transfers if I use the front USB port sometimes).
Also, is "debug mode" turned on on your phone? It is under development tools. If it is off, try turning it on. And with it on, do you get any results from running "adb devices" (presuming you have the android SDK installed or a copy of adb floating around on your computer from some other tools)?
And lastly, does the phone charge when the USB cable is plugged in? It is unlikely that 2 of the pins on the USB connection are bad without them all being bad.
Good Ideas!
Well, I've tried a couple of those ideas. The Device Manager idea revealed nothing. Nothing changes in the Device Manager when I plug in the phone. The phone DOES charge, so like you said, it's likely a software issue not hardware since two of the pins seem to work fine. BTW- the phone acknowledges it has been plugged in, too, by beeping. The computer does not.
I had tried using different computer USB ports because I have found the same to be true as you: the ports on the back go directly to the motherboard but the ones on the front are actually going through a hub, though it's inside the case, the computer sees it as a hub.
I don't have ADB Devices. I don't have any experience with that program...can you advise me? Next up, trying on a virgin computer...
Thanks for the ideas. I've got to get this worked out or my wife's going to DIE. Currently, the home button doesn't take her home, it takes her to this weird Clock App based lock screen/screen saver. Anyone have an idea how to correct that problem itself?
UPDATE: I tried to install and run ADB Devices and it didn't result in recognition by my computer.
Sending in For Warranty
It appears that this is my problem.
I took it to TMO and they approved a warranty replacement for a faulty USB port. Just in case anyone wondered.
Related
So here is the story.
My phone is 3 months old. This weekend it got some mild water damage. I was able to get it back to 99% functional. The two water damage sensors (1 on battery and one under battery were tripped). I am running Juggernaut V4.1.
From what I can see the water got the sensors but was not really inside the phone.
Everything works perfectly. Calling, Wifi, screen EXCEPT when I plug it into the computer it does not get recognized. ie Windows has errors when trying to install the USB drivers.
I am not totally screwed as it is rooted, and I have Clockwork recovery. I suspect that as long as I do not need install anything using ODIN I will be fine but I am now not able to downgrade back to stock rom or transfer files via USB (kiers works fine).
So is there anyway to reinstall another custom rom to fix the USB issue? (Tried multiple cables and multiple computers with no luck).
Should I just keep is where it is at and be happy with Juggernaut V4.1?
Should I retry installing Juggernaut V4.1?
Do I have any options with sending it back for repair or getting TMobile to replace it under warranty?
Any help or thoughts is appreciated.
Do a google search for "removing android drivers" and completely remove them, then make sure the phone did not get set to "Charge Only" mode, on stock that is easy, not sure on jugs, download the drivers for your phone, unzip them, plug the phone in, IF it is not found autoMagicaly , direct windows to where you unzipped the drivers ...
IF that does not work, warranty time ... (oh try blowing out your usb port on the phone, and try a different cable)
EDIT: I read your post twice and still did not see the part about water damage .. LOL, yeah ummm no warranty ...
Do not warranty the device without replacing the water damage labels first. You should be able to find them on ebay.
They wont warranty a device with water damage.
I would try flashing a different rom and see if that works.
Powered by the SGSII....
ThC23 said:
Do not warranty the device without replacing the water damage labels first. You should be able to find them on ebay.
They wont warranty a device with water damage.
I would try flashing a different rom and see if that works.
Powered by the SGSII....
Click to expand...
Click to collapse
Haha. You beat me to it!
Sent from my Galaxy Nexus using xda premium
Thanks for the advice. Can't find the water damage labels anywhere BTW. Any link or help would be appreciated. Even if you want to PM me that would be great.
I did find a method to restore to stock firmware(or at least close) without ODIN for anyone that is interested.
http://forum.xda-developers.com/showthread.php?t=1374868
shortbus1234 said:
I did find a method to restore to stock firmware(or at least close) without ODIN for anyone that is interested.
http://forum.xda-developers.com/showthread.php?t=1374868
Click to expand...
Click to collapse
Make sure you Odin or flash stock kernel first and then stock rom. If not you're gonna get stuck with the custom kernel images on boot up.
I have to do a replacement myself. My internal speaker is blown. How? I have no idea. I hope I don't get a bad phone with lines and stuff.
Powered by the SGSII....
Just to make sure... when you plug in your phone... your computer doesn't detect the phone at all? like the connected sound or did you get an error "unable to install etc etc" something along those lines.
If there are any signs of it being detected
1. make sure you have the Samsung drivers installed (not kies)... its in one of the stickied threads
2. if you did install the correct driver but there was an error when plugging in the phone use USBDeview to remove all samsung and Android drivers... and do it again
And why don't you just use a microsd USB adapter or something to transfer files?
It actually makes the "ta da" sound when plugged in and instantly starts charging. I have the Samsung drivers installed on both computers that I have attempted to do it. Interesting that it used to work even on my Mac computer and show up with both the internal SD and micro SD card. I am only partially screwed as I have options that you mentioned about using Micro SD card reader to transfer custom roms. Anything that requires ODIN will be out of the question as I no longer have the ability to access ODIN because that can only be done with direct connection.
I am wondering if something is messed up with the rom as everything was working correctly a few days ago on the 19th but you would think that the USB drivers are deeply embedded in the firmware.
Thanks for taking the time to reply. I will uninstall the Samsung drivers and give it another attempt.
Teo032 said:
Just to make sure... when you plug in your phone... your computer doesn't detect the phone at all? like the connected sound or did you get an error "unable to install etc etc" something along those lines.
If there are any signs of it being detected
1. make sure you have the Samsung drivers installed (not kies)... its in one of the stickied threads
2. if you did install the correct driver but there was an error when plugging in the phone use USBDeview to remove all samsung and Android drivers... and do it again
And why don't you just use a microsd USB adapter or something to transfer files?
Click to expand...
Click to collapse
Hello XDA!
I don't want to post a wall of text (not that tall of a wall, at least), so, I'll try to get to the point quickly. And yes, I have done a lot of searching, both on XDA and Google, and that will be proved soon enough with the solutions that I've tried so far.
The problem I'm currently experiencing is when I connect my phone to my computer, it charges but it isn't recognized. There is no USB notifications, no phone in My Computer, and no Windows pop up, whether it's a pop up asking me to install drivers or an unknown device has been connected, nothing. Mind you, everything has been working flawlessly, this just randomly, and I really do mean randomly, started happening. The phone has never been dropped and there is no water damage. I'm still using the USB cable that came with the phone. And, if it matters, I'm rooted, running the leaked LI8 JB ROM, stock kernel, and UVLEM baseband.
Here's a list of said solutions that I've tried so far:
Using a thin paint brush, wet the tip a little with alcohol and tried cleaning out the USB port
Connecting to a different computer, connecting with a different cable, connecting to any other USB ports on the computer
After making Nandroid backup: Data wipe/factory reset, flashing a different ROM
Remove Samsung USB drivers and reinstalling, also tried installing Samsung Kies
Uncheck USB debugging and restarting, checking USB debugging and restarting
Dialled *#7284#, select Modem, then reselect PDA, changing Qualcomm USB settings and changing it back to MTP + ADB
Turn off phone, remove battery for 30 sec, reinsert and boot up (soft reset to reset internal circuitry as described by a Samsung live chat service tech)
I might've left out a couple, but please do enlighten me of methods that you might know, I'll be sure to try it or let you know if it's already been attempted.
..also, when connected to my PC, under Settings > Battery, it shows "Charging (AC)" IIRC, this should be showing "Charging (USB)".
This next attempt stood out to me. I decided I would try and go back to the stock firmware, one where I would have to use Odin3. So, I put the phone in Download Mode, open up Odin3, connect the phone, and I get a pop up in Windows! It's trying to install drivers, and fails. I can't flash the stock Samsung firmware if I wanted to, even for warranty purposes. I do currently have the USB drivers installed, but my PC hasn't gone through the driver installation for when the phone is connected to the computer. So, I'm assuming that is why this is failing? I'm not entirely sure. But, when I saw this, I unplug the phone and plug it back in numerous times, to rule out that this might be a hardware problem. And, every time I plug it back in, it tries to install the drivers but fails. So, it's detecting my phone in Download Mode. I reboot and hope that it will detect normally, but no, it doesn't...
As a last resort, I went to Samsung.com and chatted with a service tech, he runs me through two procedures that I haven't done, the 'soft reset' and a 'master reset', which is done through Settings > Back up and Reset > Factory Data Reset. Neither worked, so, he then checks my IMEI and finds that I am still under the 1 year warranty and files a ticket for repair service. I asked him if there is a replacement warranty and he says that is done through my service provider (T-Mobile) with the Premium Handset Protection service, which I didn't add. Not because I didn't want to, but I can explain in later posts if someone is interested in why it wasn't added. So, now I have the return label in my inbox ready to be printed, taped onto a box containing my phone, and sent out. But, I can't go through with this because I have a custom ROM on the phone. There is no counter because I've already used Triangle Away, AFTER this started happening.
I am completely stumped... Any information is greatly appreciated!
EDIT: Also, I've disassembled the phone to check the MicroUSB port to see if any pins or prongs might've came loose. Everything is in tact.. I also wanted to see if the MicroUSB port was replaceable because I was able to find a spare MicroUSB ports on a website. But, it seems that the port isn't easily replaceable. It doesn't look removable, and I'm uncertain if it can be de-soldered to solder a replacement one on. Also, some thing caught my eye when I had it disassembled. There were two components of the phone that had SGH-I747 imprinted on them. I wasn't able to take pictures as I was in a rush to get it put back together, but thought it was of interest to bring up.
How do you have a custom ROM if you flashed the stock one? I'm confused..
Try installing drivers through the toolkit.
If windows recognized it in Download Mode, keep trying to unplug and replug the cable in the same and different ports until it installs?
This happened once on my Galaxy S 4G.
Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
http://d-h.st/zya
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app
psykhotic said:
How do you have a custom ROM if you flashed the stock one? I'm confused..
Try installing drivers through the toolkit.
Click to expand...
Click to collapse
I was never able to flash the stock firmware because my computer fails to install drivers for it. I've also tried using the drivers from the toolkit and it gave me no results.
theexel said:
If windows recognized it in Download Mode, keep trying to unplug and replug the cable in the same and different ports until it installs?
This happened once on my Galaxy S 4G.
Click to expand...
Click to collapse
I just hopped on right now after trying the different USB ports on my computer while in Download Mode. Same deal, it detects, tries to install drivers, then fails. It's coming up as an Unknown Device.
DocHoliday77 said:
Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I currently have the latest Kies installed. I'm going to uninstall and give that link a shot, though. Hopefully, Odin3 will be able to detect it, at least, so I can get the stock firmware back on this thing...
DocHoliday77 said:
Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
No luck with those drivers neither..... =/
What version of Windows are you running?
Aerowinder said:
What version of Windows are you running?
Click to expand...
Click to collapse
Windows 7 x64
I had the same problem. Tried uninstalling and and reinstalling drivers. Only thing that worked was restoring my pc to factory condition and starting over. Sucked but it worked
Sent from my SGH-T999 using xda premium
jasonpantuliano said:
I had the same problem. Tried uninstalling and and reinstalling drivers. Only thing that worked was restoring my pc to factory condition and starting over. Sucked but it worked
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thank you for your input, but I doubt this would work in my situation. Ive tried connecting it to my laptop and another computer in the house and they both do not detect the phone. However, i would consider going that route as a last resort if there arent any other ideas.. i just need Odin3 to recognize it so i can revert and send it back in..
Any other suggestions, XDA? And thank you to those that responded!
johnx818 said:
Thank you for your input, but I doubt this would work in my situation. Ive tried connecting it to my laptop and another computer in the house and they both do not detect the phone. However, i would consider going that route as a last resort if there arent any other ideas.. i just need Odin3 to recognize it so i can revert and send it back in..
Any other suggestions, XDA? And thank you to those that responded!
Click to expand...
Click to collapse
I had the same issue. Got my phone replaced and it worked fine.
eldgrim said:
I had the same issue. Got my phone replaced and it worked fine.
Click to expand...
Click to collapse
And that is exactly what im trying to do..
So the short question is if there is any way for me to get root without a working usb port?
Last week I plugged in to charge my phone overnight with the phone off. In the morning, I was surprised to find that the screen was on and what should have been a full green battery was instead a scrambled image that kind of looked like a battery. I powered on the phone and it worked so I thought nothing of it but later on that night I needed to pull a file off my phone via usb and realized that the phone will no longer detect the usb host, ie. no mtp options whatsoever. It at least does still charge.
Since then I have tried cleaning the usb connector, pulling the battery/sim, setting the UART using *#7284#(PDA, mtp+adb), multiple computers, and multiple cables(including the Samsung one) and the phone still doesn't ever think its connected to a host. So today I decided to use my php warranty service which meant I had to restore stock recovery and rom. So I grabbed mobile odin and a stock UVLDJA image. Ran Triangle away once to clear the counter, and another time to verify it was at zero, and installed the full image via mobile Odin. When the phone booted back up, it successfully installed the rom only the flash counter is back at one and now I have lost root. If I had used my head I should have flashed just the recovery first but I wasn't thinking....
Any suggestions on how to get root back? I read these forums quite a bit and I am thinking that I am SOL but hoping maybe someone has a suggestion I haven't seen yet.
Dlkiser said:
So the short question is if there is any way for me to get root without a working usb port?
Last week I plugged in to charge my phone overnight with the phone off. In the morning, I was surprised to find that the screen was on and what should have been a full green battery was instead a scrambled image that kind of looked like a battery. I powered on the phone and it worked so I thought nothing of it but later on that night I needed to pull a file off my phone via usb and realized that the phone will no longer detect the usb host, ie. no mtp options whatsoever. It at least does still charge.
Since then I have tried cleaning the usb connector, pulling the battery/sim, setting the UART using *#7284#(PDA, mtp+adb), multiple computers, and multiple cables(including the Samsung one) and the phone still doesn't ever think its connected to a host. So today I decided to use my php warranty service which meant I had to restore stock recovery and rom. So I grabbed mobile odin and a stock UVLDJA image. Ran Triangle away once to clear the counter, and another time to verify it was at zero, and installed the full image via mobile Odin. When the phone booted back up, it successfully installed the rom only the flash counter is back at one and now I have lost root. If I had used my head I should have flashed just the recovery first but I wasn't thinking....
Any suggestions on how to get root back? I read these forums quite a bit and I am thinking that I am SOL but hoping maybe someone has a suggestion I haven't seen yet.
Click to expand...
Click to collapse
Checking your flash counter in TA trips your counter, that's why it's at 1. Use mobile Odin to flash root66 to get rooted again.
Sent from my SGH-T999 using Tapatalk 2
Towle said:
Checking your flash counter in TA trips your counter, that's why it's at 1. Use mobile Odin to flash root66 to get rooted again.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Ok, thanks for the explanation on the counter. Don't I need root already to run mobile Odin?
Dlkiser said:
Ok, thanks for the explanation on the counter. Don't I need root already to run mobile Odin?
Click to expand...
Click to collapse
Oh, duh! Yes lol you do. There would be no other way. Have you tried a factory reset then try to connect your phone? You could also try to install Kies on your PC to make sure all drivers are correctly installed.
If you wouldn't have said you have tried other cables, I would have for sure thought defective cable. Some cables are also charge only.
Sent from my SGH-T999 using Tapatalk 2
Towle said:
Oh, duh! Yes lol you do. There would be no other way. Have you tried a factory reset then try to connect your phone? You could also try to install Kies on your PC to make sure all drivers are correctly installed.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, did the factory reset along with all of the other suggestions I could find. I typically try to avoid Kies and since I cannot even get the device to enumerate I'm pretty sure it's not driver related.
I think my only hope would be getting root or twrp intalled via stock recovery or adb over wifi.
Thanks, I appreciate the help.
download Odin3 v1.85
Put your phone in download mode (vol down=menu=power then after the screen comes up press vol up
plug the phone usb to the computer,
run odin
the first box on the top left should have a colored highlight (the ID:COM )
if that pops up, your phone is 99% functioning correctly, and only problem is in your computer.
When trying do do a regulad usb transfer to the computer:
I have noticed, sometimes I have to connect, wait a bit (like maybe 2 minutes)
then disconnect the cable for about 15 sec then connect again, and it pops up after a minute
you could also try this:
open explorer on the computer(double click on my computer) and see if there is a t999 in your left pane. Sometimes the autorun function in the
computer gets farkled and it does not open automatically and you have to do it manually,
Good luck & Aloha !
Go to galaxys3root.com and follow his t.mobile root tutorial WORD FOR WORD. USE THE USB THE PHONE CAME WITH AND KILL SAMSUNG KIES. also run Odin before you connect the phone to Pc, should be no problem bruh once it took me a couple of hours making love to my comp before I got a colored com box. And use a windows PC Mac suxx for this kind of.
Sent from my SGH-T999
I've basically given up trying to get the usb port working... I am convinced this is a hardware issue. Nothing shows up in the device manager when I plug in the phone whether USB debugging is on/off or I am in normal mode or download mode. The phone will never bring up the MTP options in the notification bar either. Again this is with multiple cables on 2 different comps where it used to work just fine. I think whatever bad charge experience I had last week damaged the USB host controller on the phone.
I think what looks promising now is using adb over wifi(http://forum.xda-developers.com/showthread.php?p=26844535) along with root via adb(http://galaxys3root.com/galaxy-s3-root/how-to-root-u-s-canadian-dual-core-galaxy-s3-on-mac-osx/). I can't do this at work but I'll follow up tonight on what will hopefully be success in case this could help someone else out.
Edit: Ugh, some quick googling shows that I need either root or working USB to make adb over wifi work.
Would you want to replace your chatging port?
Sent from my SGH-T999
AppzTheGawd said:
Would you want to replace your chatging port?
Sent from my SGH-T999
Click to expand...
Click to collapse
I don't think so.... the micro usb port is mounted on the main board and short of replacing that entire board it would be a ton of time/effort for something that I don't exactly think is the problem.
Dlkiser said:
I've basically given up trying to get the usb port working... I am convinced this is a hardware issue. Nothing shows up in the device manager when I plug in the phone whether USB debugging is on/off or I am in normal mode or download mode. The phone will never bring up the MTP options in the notification bar either. Again this is with multiple cables on 2 different comps where it used to work just fine. I think whatever bad charge experience I had last week damaged the USB host controller on the phone.
Click to expand...
Click to collapse
This happened to me, and it was from using different devices in the same port (with same cable). I switched ports and it worked. Might not work for you, but worth a mention - it really stumped me and I tried everything including restoring the OS to an earlier point.
Sent from my SGH-T999 using xda app-developers app
Dlkiser said:
I don't think so.... the micro usb port is mounted on the main board and short of replacing that entire board it would be a ton of time/effort for something that I don't exactly think is the problem.
Click to expand...
Click to collapse
Now that S3's are getting older, more people will be losing their functional USB ports. I found holding the phone vertically with steady even pressure on the plug was the trick to getting a solid connection on my flaky port, at least enough to get stock back (to send it back). That was the longest 15 minutes of my life (OK, not, but it was in the top 10, mostly because it was simultaneously nerve-wracking and insanely boring).
I tried de-soldering a usb port on a Galaxy S. Yeah.... To say it mildly, the way Samsung sets them up is booby-trapped. You can't get the existing silver solder hot enough to melt without toasting the board somehow. The boards are also wafer-thin and dimensional on both sides. Despite generally having a knack for fine tuning and detail work (thanks to estrogen or something), I felt like an ogre in a doll house. I definitely would suggest having all the (exactly) right tools in place before tackling it. Even then it might not be the port itself, but something between the actual port and the other components.
One other thing to note, Mobile Odin is an amazing tool, but it's even ***more crucial*** than regular Odin to get your ducks in a row before you flash. Know exactly what you are flashing what your next steps are, and what your results are supposed to be. One thing in particular: if you flash a stock ROM, it includes stock recovery, and you will lose root. make sure you've run Triangle Away before you flash stock (which won't trigger your counter, but anything else will).
I plan to keep the Triangle Away and Mobile Odin apk's ready on ExtSD to install, and a copy of a stock image (ROM) as well, from now on, on all my phones. You never know when that port is going to give up the ghost.
Just thought I'd add a couple things here. More times than not, when someone thinks their usb port on the phone is bad, it's actually just the cable. Even if the cable works on something else, or works to charge the phone. They ruin much, much, more easily than anyone wants to believe! Especially when you plug/unplug it as often as with a phone.
As for Mobile Odin, I fully agree! It's one of my favorite apps by far! But if you're going to keep stock firmware handy, which I highly recommend, you may as well keep the root66 version. Flash back with that, then run triangle away, then in SuperSU, choose full unroot. Then all you need is a factory reset. Making TA the last step makes for far fewer user mistakes.
Sent from my SCH-I535 using Tapatalk 4
I was running CM10 but I got a message whenever I got into the Camera App that said "Unfortunately, Gallery has stopped working", after a research in here I found that I wouldn't get that msg again if I installed this "gapps-jb-picasa-20121011-signed" thing.
I did, but when I got into my Camera App, I didn't have the other options like "Image Effects" and all that stuff.
So, what I did was to Restore my phone from my BackUp folder that I've created before installing CM10, but for my surprise I got a msg saying "VolumeError" or something like that and other things that I can't really remember... and as a good Mexican that I am, I ignored it and hit the Reboot System Now..
What happened next almost made me cry...
I was expecting to get in my stock rom without any problems and yadda yadda but... OH SURPRISE!
I got stuck on the boot screen, where it says "Samsung" and the website of it and I didn't freak out... I waited like 5-6 mins and took the battery out. When I turned again, I tried to get in Recovery Mode but the screen just kept turning off and on and saying the exact same thing, the "Samsung" logo and it's website.
I hope you can help me and please answer me. I don't know if I'm 1000000% screwed but I will only wait for the worst. Sorry for my bad english and don't hate me for being mexican
I don't know if I can get into my phone from my PC but whenever I plug my phone in, it just loads it as if it was in Charging Mode
PLEASE HELP ME!
I BEG YOU!
Flash again CM10 with wipe data, cache, dalvik
If still stuck
Odin to stock ROM, you can search on google to odin the epic
Sent from my JellyBeer v.4.14 epicmtd (b3)
Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
AndyYan said:
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
Click to expand...
Click to collapse
Thanks to Everyone!
I solved this like 2 hrs after all this happened.
I got it by Odin. I couldn't go into Recovery Mode, but I got in Download Mode and do it by Odin.
Sorry, I'm a n00b to all this.
Greetings from México and thanks for all your support.
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
To the OP:
I would follow the instructions in this video from the part where qbking77 talks about putting the phone in download mode, as you presumably did when you first rooted your phone. Download all the files linked/referenced on the site, especially the Samsung mobile drivers, Odinv3 1.87, CWMRecovery, and the deOxed versions of the stock ROM. In sum:
1) get into recovery mode by holding onto the volume down, camera buttons, and then without letting either of those go, press and hold the power button.
if you get into recovery mode, skip to step 4
2) while your phone is completely off, hold onto the "1" button on the slide out keyboard first, then without letting the 1 button go, press and hold the power button until you're in download mode.
3) flash the version of Clockworkmod
4) once in recovery mode, wipe your phone, clear the cache, and dalvik cache, and then flash the deOxed version of the stock ROM
niteNarmor said:
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
Click to expand...
Click to collapse
Do you have the mobile drivers installed on the computer you're trying to connect your phone to?
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
niteNarmor said:
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
Click to expand...
Click to collapse
Uninstall and reinstall drivers.
Sent from my SPH-D700 using Tapatalk 2
Have already done that. But just for laughs, I did do it again with no change.
can you get your D700 into download mode as described above?
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
niteNarmor said:
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
Click to expand...
Click to collapse
Try to install another version of Odin or getting Odin from a different server.
My phone is fully recovered and now I'm only SuperUser 'cause I don't want any CM by now.
Greetings from Mexico!
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
EDIT: I have now downloaded and tried 4 different Odin programs with no avail. Again, that makes 6 Odin programs, 6 different USB ports, 3 different cables with the same exact results. The computer recognizes device but Odin will not.
niteNarmor said:
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
Click to expand...
Click to collapse
Had a simular issue when I had two odins on the same computer, for a lark and as I had nothing better to do, tried installing drivers and one version of odin to a vertual machine running vista and checked to see if my computer's vertual machine would reconize and it did, I took it as a sine that at one point I had done something to my computer's main os sometime between rooting my epic 4g and frying it (recovering from a backup from a different parition layout I think, bad times with bootloops and seeing way to much of the samsung logo.) So as I'm not brave enough to run odin on vm I instead removed all of odin from my main os and all of the samsung drivers, then reinstalled rebooted and repluged my epic in, got reconition and reflashed with plesure.
The other issue might be that your computer is reconizing the device and try/failing/hanging and not allowing odin in. Had an issue when my computer was failing to pop up a 'what do I do with this' window and hanging round in the system. A reboot with the internet unpluged strangely solved that for some reason, might be the reboot might be the combo, but I find better connection reconition with my computer when I've fewer things connected.
Don't mind the spelling to much I clean up with my other device.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
jeffreyjicha said:
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Phone does not boot past the "Samsung - www.samsung.com" logo. Plus, as with all of my devices, USB debugging is always checked.
Thanks for the suggestion though. Always helps to double check things.
I believe I am going to take it to Sprint tomorrow.
If I can't get into it, they should not be able to get into to it either. If they can't get into it, HELLO WARRANTY....
Perhaps before doing the whole getting found out thing with the return center, perhaps they do know what they're doing, try rolling this link past your eyes?
http://forum.xda-developers.com/showthread.php?t=773032
I know I've been in your boot problem situation and recovered, it just took persistence and eyenumbing amounts of reading.
Note On the multiple Odin, USB, and driver installation: if you've access to another computer it could be worth wile to run once though on a previously virgin computer, meaning your phone and computers' USB's have never touched. Just do the installation, rebooting, and plugging in exasperatingly meticulous order.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"
Yep tried the "virgin computer" computer as well. The computer sees the device but Odin does not. Com light will not illuminate.
Sounds grim.
So to rap up all the cables, plugs, computer, and software with odin is out of the debug process.
So I did some digging into the past and if your computer is reconizing and odin is not then ADB (android debug bridge) and the sdk are the other option
http://forums.androidcentral.com/epic-4g-rooting-roms-hacks/33427-how-access-your-adb-shell.html
Ran across this and it might just be what you need. Its not quick but it has worked for me in the past.
The other thing that may work is ejecting the sd card and battery before doing anything. Though its likely something you've already tried.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"
I just got my phone fixed by a repair shop and they had to replace the motherboard. So when I got it back it has 5.0 on it instead of my KitKat ROM I like. I'm trying to get into Odin so I can reflash a stock kitkat rom but no matter what driver I put on my computer when ever I plug my phone in Windows says Unrecognized Device and Odin doesn't pick it up either. Please help!! I am dying without being able to revert back to KitKat and my favorite rom.
The driver I am trying to install is SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0
By the way it's a T-mobile Note 3.
djnuffsaid said:
I just got my phone fixed by a repair shop and they had to replace the motherboard. So when I got it back it has 5.0 on it instead of my KitKat ROM I like. I'm trying to get into Odin so I can reflash a stock kitkat rom but no matter what driver I put on my computer when ever I plug my phone in Windows says Unrecognized Device and Odin doesn't pick it up either. Please help!! I am dying without being able to revert back to KitKat and my favorite rom.
The driver I am trying to install is SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0
By the way it's a T-mobile Note 3.
Click to expand...
Click to collapse
Try downloading and installing the newest version of Kies. It will install all the drivers you need. I'll look into that issue in case that doesn't work. Hopefully they didn't install a board with a bad port. It can be bad and still charge.
Sent from my SM-N920T using Tapatalk
ludeawakening said:
Try downloading and installing the newest version of Kies. It will install all the drivers you need. I'll look into that issue in case that doesn't work. Hopefully they didn't install a board with a bad port. It can be bad and still charge.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
I'm trying that right now. As soon as I have some results I will post back. Thanks for your help so far.
Maybe that'll work for you.
Sent from my SM-N920T using Tapatalk
I don't have Lolipop, but don't you have to manually set USB to connect on the phone (MTP mode), otherwise it stays in charge mode only? either that or your phone is set to charge mode only and you need to enable either MTP or PTP under USB options, for connection to work.
ludeawakening said:
Try downloading and installing the newest version of Kies. It will install all the drivers you need. I'll look into that issue in case that doesn't work. Hopefully they didn't install a board with a bad port. It can be bad and still charge.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
So I did exactly what you said to do and I actually have another T-Mobile Galaxy Note 3 to use as an alternate. My phone, no matter what computer I use and whether I use just the straight drivers or the install through Kies3, gives me the same issue - when ever I plug my phone in Windows says Unrecognized Device and Odin doesn't pick it up either. Please help!! I am dying without being able to revert back to KitKat and my favorite rom.
Not sure what to do guys?
The other T-Mobile Note 3 I used as an alternate worked just fine.
pete4k said:
I don't have Lolipop, but don't you have to manually set USB to connect on the phone (MTP mode), otherwise it stays in charge mode only? either that or your phone is set to charge mode only and you need to enable either MTP or PTP under USB options, for connection to work.
Click to expand...
Click to collapse
You're correct about MTP for mounting as internal storage, but MTP and PTP isn't used while in download mode and connected to Odin. It uses ADB at that point and it does that automatically. You just have to make sure USB Debugging is turned on.
djnuffsaid said:
So I did exactly what you said to do and I actually have another T-Mobile Galaxy Note 3 to use as an alternate. My phone, no matter what computer I use and whether I use just the straight drivers or the install through Kies3, gives me the same issue - when ever I plug my phone in Windows says Unrecognized Device and Odin doesn't pick it up either. Please help!! I am dying without being able to revert back to KitKat and my favorite rom.
Not sure what to do guys?
The other T-Mobile Note 3 I used as an alternate worked just fine.
Click to expand...
Click to collapse
Just gonna check some things with you. Have you made sure to activate Developer options and turn on USB Debugging? I know it doesn't connect while attached to a computer right now but does it charge? You said you've tried different computers, but have you tried different USB cables as well?
If the phone is charging but not connecting there is a small trick to see if it's a hardware issue. Get a very this piece of plastic or something else kind of stiff and barely wedge it under the charging port. You put it under the lower side that faces the back cover. You only want something that's going to put a tiny bit of pressure there. Most of the time if a charging port goes out, it's because the contacts are loose. If you do this and it connects as it should, then they put a bad board in the phone. This trick should be the last resort though.
Sent from my SM-N920T using Tapatalk