I have ported CWMR to the I927(r) device.
Here are the instructions, prepared for me by CarpeNoctem who was instrumental in the testing of this port. Thanks to him for providing me with all the files. This is a RECOVERY that does not rely on it being in a kernel, so you can use this with any kernel you like.
---
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
1. Launch odin (v1.82 tested)
2. Boot your phone in "Download mode"
3. Select PDA in odin and choose the file "CWMR_recovery.tar.md5"
4. ONLY "auto reboot" must be check !!
---
This is considered an ALPHA build as it has only been tested on a few handsets so far. Flashing this means that you acknowledge this fact. Please help test it by using it and reporting any problems that you might have.
The file for ODIN is here: CWMR_recovery.tar.md5 OUTDATED
The source code (device tree) is on my github: android_device_samsung_SGHI927R
Feel free to modify this all you like, enjoy.
Credits:
koush for clockworkmod recovery.
carpenoctem/gabby131 for testing this out.
-----
UPDATE:
I have migrated this device to the 5.0.2.7 source tree for clockwork.
v2: CWMR5x_i927_recovery.tar.md5
first! love utkanos
Thanks for all your work, you have been so great throughout this.
lol I recognize those instructions
I did not do much, just like to take some risks
Thanks for your work, patience and determination !
Works like a charm. Thank you.
yeah! CWMR is official!
Thanks to utkanos for all the CWM work and being patient on giving me step-by-step instructions (for I am a super noob!), Carpe for bricking his device just to give us root and being always the first guinea pig, and to future devs and testers.
I also want to thank vil33 for finding utkanos, and being amazed for my 1GB data on my first CWM backup LOL!
UPDATE:
I have migrated this device to the 5.0.2.7 source tree for clockwork.
v2: CWMR5x_i927_recovery.tar.md5
This is considered an alpha release, please test this on the new codebase and report any problems (if any).
Installed with no problems.
Easy to install and works great! Thanks for your work.
What's the 3 button, is it just +/-/power?
Symmetric said:
What's the 3 button, is it just +/-/power?
Click to expand...
Click to collapse
Do you mean the buttons used to navigate in CWM? Volume is used to scroll and power to select. I believe you can use the other keys too.
Symmetric said:
What's the 3 button, is it just +/-/power?
Click to expand...
Click to collapse
it's only 2 buttons.
Vol down + Power = CWM
Vol Up + Power = Download mode
Seems to work perfectly here so far, thanks very much for making this available!
Wait, so what is the point of this CWM? I'm sorry, quite new to Android.
Thank you so much,it was so easy and fast to install.
Thanks so much for everything guys!
Aquethys said:
Wait, so what is the point of this CWM? I'm sorry, quite new to Android.
Click to expand...
Click to collapse
It replaces the stock recovery of your Android device. It adds many more feautres such as backup/restore, flashing custom roms, etc.
Fix Permissions
could you please add the Fix Permissions feature in the Advanced menu ? I'm not sure how difficult that would be but it would be handy i think.
Thank You for all you've done
Include GPT tools
Nice work!
Next release include please parted utility.
Would be nice to have some GPT management tool.
--
Code:
<4>[ 7.293135] Primary GPT is invalid, using alternate GPT.
<6>[ 7.293252] mmcblk0: p1 (...S) p2 (...P) p3 (...C) p4 (...S) p5 (...C) p6 (...A) p7 (...M) p8 (...S) p9 (...X) p1
0 (...A) p11 (...D)
managing it using parted seems a bad idea
perhaps there is a loader or so in the first sectors, right?
mount external sdcard to /sdcard
Can you please mount external sdcard instead of internal one.
/etc/fstab:
Code:
#/dev/block/mmcblk0p4 /sdcard vfat rw
/dev/block/mmcblk1p1 /sdcard vfat rw
Related
CyanogenMod 7 for Samsung Galaxy S Series Phones
MAINTAINERS
Samsung Captivate
atinm - http://twitter.com/atinm
unhelpful - http://github.com/Unhelpful
Samsung Galaxy S GT-I9000
codeworkx - http://twitter.com/codeworkx
coolya - http://twitter.com/dumdidum
guiper -http://twitter.com/guiperpt
Samsung - http://twitter.com/helvio
Galaxy S GT-I9000B
helvio http://twitter.com/helvio
Samsung Vibrant
coolya -http://twitter.com/dumdidum
SOURCES
GITHUB: http://github.com/teamhacksung
HOWTO BUILD: /http://forum.cyanogenmod.com/topic/15513-gt-i9000-cyanogenmod-7-developer-thread/
WARNING
This release contains a lot of bugs and is purposed for testing only. It's not ready for daily use!
Don't flash this rom if you aren't able to solve some problems without our help.
Don't make any feature requests!
INFORMATIONS
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
INSTRUCTIONS
FIRST TIME FLASHING CM7 TO YOUR SAMSUNG GALAXY S SERIES PHONE:
* Make sure your phone is fully charged! Update process will take some time.
* Make sure there's enough free space at your internal sdcard (200MB)
* Make sure you've not disabled HSPA by using the dialer code *#301279#
* Download following files from sourceforge: Captivate https://sourceforge.net/projects/teamhacksung/files/captivate | Galaxy S https://sourceforge.net/projects/teamhacksung/files/galaxys | Galaxy S B https://sourceforge.net/projects/teamhacksung/files/galaxysb| Vibrant https://sourceforge.net/projects/teamhacksung/files/vibrant
- DEVICE-efsbackup.zip
- cm7-DEVICE-initial-kernel.tar
- cm7-DEVICE-initial-XXXXXXXX.zip
* Copy following files to your internal sdcard
- DEVICE-efsbackup.zip
- cm7-DEVICE-initial-XXXXXXXX.zip
* Flash a kernel which comes with clockworkmod-recovery using odin: Captivate http://www.google.com/url?q=http://...QQFjAA&usg=AFQjCNEZGUqZZwymvX012BLsd16hxwz3Ag | Galaxy S http://forum.xda-developers.com/showthread.php?t=822756| Vibrant http://forum.xda-developers.com/showthread.php?t=962780
* Reboot into recovery using 3-button-combo and apply DEVICE-efsbackup.zip.
- Don't use "reboot recovery" command or other shiny things to do this!
* Flash cm7-DEVICE-initial-kernel.tar as pda using odin without auto-reboot and without re-partition
* Reboot into recovery using 3-button-combo
* Choose "mounts & storage" and format system, data, cache
* Apply zip from sdcard: cm7-DEVICE-initial-XXXXXXXX.zip
* Do a factory reset / data wipe!
* Reboot
* OPTIONAL: Copy Gapps to your internal sdcard and flash it at recovery.
* DEVICE = stands for your device name. e.g. captivate, galaxys, galaxysb, vibrant
UPGRADING FROM EARLIER CM7-RELEASE:
* Download the updated package update-cm-7-XXXXXXXX-NIGHTLY-DEVICE-signed.zip from sourceforge: Captivate https://sourceforge.net/projects/teamhacksung/files/captivate | Galaxy S https://sourceforge.net/projects/teamhacksung/files/galaxys | Galaxy S B https://sourceforge.net/projects/teamhacksung/files/galaxysb | Vibrant https://sourceforge.net/projects/teamhacksung/files/vibrant
* Copy it to your internal sdcard
* Reboot into recovery
* Do a Nandroid Backup!
* Choose "install zip from sdcard" -> "choose zip from sdcard", choose update-cm-7-XXXXXXXX-NIGHTLY-DEVICE-signed.zip and apply it! (Google Apps will be restored automatically)
* Reboot
* DEVICE = stands for your device name. e.g. captivate, galaxys, galaxysb, vibrant
FLASHING ANOTHER RADIO IMAGE:
* Download the desired radio package cm7-DEVICE-radio-XXX.zip from sourceforge: Captivate https://sourceforge.net/projects/teamhacksung/files/captivate| Galaxy S https://sourceforge.net/projects/teamhacksung/files/galaxys| Galaxy S B https://sourceforge.net/projects/teamhacksung/files/galaxysb| Vibrant https://sourceforge.net/projects/teamhacksung/files/vibrant
* Copy it to your internal sdcard
* Reboot into recovery
* Choose "install zip from sdcard" -> "choose zip from sdcard", choose cm7-DEVICE-radio-XXX.zip and apply it!
* Reboot
* DEVICE = stands for your device name. e.g. captivate, galaxys, galaxysb, vibrant
ADDITIONAL INFORMATION
* Install the Nexus S USB-Drivers from SDK-Manager if you're using windows.
* Don't flash any other kernels! It will break your system.
* To revert to a samsung rom, simply use odin with repartition option enabled.
* Don't try to convert a onenand partition to another filesystem!
* To format a onenand partition at shell use erase_image. e.g.: erase_image system, erase_image cache
* To flash a image to onenand partition at shell use flash_image. e.g.: flash_image system system.img, flash_image boot zImage
FAQ & USER DISCUSSION
http://forum.cyanogenmod.com/topic/15278-all-models-cyanogenmod-7-faq-user-discussion/
KNOWN BUGS
* Polling problem on RIL (works after lock and unlock)
* 2G/3G toggle (works if no data connection is active)
* Compass (works not at 100%)
* commands: reboot recovery, reboot download (maybe not possible to implement)
* FM-Radio
* TV-Out
HOW TO REPORT BUGS OR PROBLEMS?
* Issues Tracker: link http://code.google.com/p/cyanogenmod7-for-samsung-galaxys/issues/list
* If the device was hard reboot, please provide the file "/proc/last_kmsg".
* If the device was soft reboot or is "bootlooping", please run a logcat http://wiki.cyanogenmod.com/index.php?title=Logcat and provide the full ourput.
* Please use Pastebin http://cyanogenmod.pastebin.com/ when possible.
DOWNLOADS
NEW NAMING FOR UPDATES, EXAMPLE: "update-cm-7-03102011-NIGHTLY-GalaxyS-signed.zip"
Captivate
Sourceforge: link https://sourceforge.net/projects/teamhacksung/files/captivate
Galaxy S GT-I9000
Sourceforge: link https://sourceforge.net/projects/teamhacksung/files/galaxys
Galaxy S GT-I9000B
Note: Fully untested!
Sourceforge: link https://sourceforge.net/projects/teamhacksung/files/galaxysb
Vibrant
Sourceforge: link https://sourceforge.net/projects/teamhacksung/files/vibrant
Google Apps Addon
Version: gapps-gb-20110307-signed.zip
Mirror: link http://android.d3xt3r01.tk/cyanogen/gapps/
Mirror: link http://goo-inside.me/gapps/
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
SUPPORT US
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3N9W7K94QCZKL
All Donations will be split up and redirected to all involved developers.
And/Or if you want to thank atinm (a liver transplant survivor), sign up as an organ donor http://donatelife.net/
This post has been edited by codeworkx: 11 March 2011 - 08:05 PM
6
CHANGELOG
04102011
- usb tethering fixed
- modified sensitivity of haptic feedback
04092011
- usb sharing of external sdcard (breaks usb tethering)
03312011
- headphones
03262011
- front facing camera
03182011
-storage update
03122011
- decreased wifi scan interval
- fixed storage menu (settings)
03112011
- disabled extended JNI checks (Skype)
- modifications on SGSTheme
03102011
- cpufreq
20110309
- wifi sleep fixed
20110304
- nothing new but fresh builds for all four devices!
- moved hosting to sourceforge for all devices
- changed build id to GRI40
- changed product model to GT-I9000, SGH-T959 and so on...
This post has been edited by codeworkx: Yesterday, 08:31 PM and uptated on xda by fbousk 18/03/2011 10:14 am
Wow!
Sent from my GT-I9000 using XDA App
Thanks for the update, would not have known otherwise. I'm not adventurous enough though as i've got a Bell i9000m and woried about mine getting bricked again for the 4th time heh. Any bell users try this though?
I advise that only people who know can read instructions should use this, random reboots is quite annoying at times. There are also quite a lot of bugs. Can't wait for the guys to fix all the big bugs. Hopefully not to long now
guys where can i find spedmod k12n becouse harcdcore doesnt have it uploadet anymore...
use the latest spedmod it should work
smukc said:
guys where can i find spedmod k12n becouse harcdcore doesnt have it uploadet anymore...
Click to expand...
Click to collapse
inside galaxy initial package there is speedmod kernel...
speedmod-kernel-k12n-500hz.tar is included in cm7-galaxys-initial-package.zip.
it's just for the efs backup. the kernel will go away after this.
smukc said:
guys where can i find spedmod k12n becouse harcdcore doesnt have it uploadet anymore...
Click to expand...
Click to collapse
This speedmod is in initial package-just extract it
codeworkx said:
speedmod-kernel-k12n-500hz.tar is included in cm7-galaxys-initial-package.zip.
it's just for the efs backup. the kernel will go away after this.
Click to expand...
Click to collapse
1) Thank you!
2) Ist there something special about the "n" Version, or is it just the "tested" one?
This is a dream come true
Sent from my Legend using XDA App
MrBusiness said:
1) Thank you!
2) Ist there something special about the "n" Version, or is it just the "tested" one?
Click to expand...
Click to collapse
We've tested this one. But you can use any kernel which uses cwm recovery.
just a quick question guys..
am i right to say flashing this rom is like flashing any other rom on xda and if anything happens i can just use CWM or ODIN to reflash/unbrick the phone? will it like permanently brick or "destroy" my phone in any way?
Is the camera Working now?
Sent from my GT-I9000 using Tapatalk
You are right if you have any problem, just reflash a Samsung ROM in Odin.
BUT I STRONGLY RECOMMEND TO DO THAT ONLY IF YOU HAVE PERMANENT DOWNLOAD MODE.
I am a tester of this ROM for 2 weeks now and the ROM is pretty stable.
EDIT : READ ISSUES LIST.
By the way: I'm looking for a bricked i9000 to test some bootloader stuff.
Anyone here with a bricked i9000?
no market in it...
Are you BLIND ?
+ DID YOU EVER USE CYANOGEN ?
+ Read the damn post by Codewokx on CM FORUM and you will have market...
zeeshee said:
no market in it...
Click to expand...
Click to collapse
Back to my previous point, you should not use this if you cannot read.
Have anyone tested camerafun with CM7? I remember that camerafun was the only camera app that actually had colors (on preview) on CM6.1. So maybe it works om CM7 too?
This thread is for CM7 RC releases for HD2. These are unofficial RC.
I will be maintaining CM stuff for HD2 all unofficially. They are compiled from source and not ported/kanged from other devices.
CyanogenMod is a free, community built distribution of Android 2.3 (Gingerbread) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Please do NOT post bug reports on any issue tracker for these builds. Report bugs here code.google.com/p/cm7leo
All source code is available at the CyanogenMod Github! If you'd like to to contribute to CyanogenMod, checkout Gerrit instance.
These builds REQUIRE ClockworkMod Recovery 3.x. If you use ClockworkMod Recovery 2.x to flash, it will not boot.
Additionally, ClockworkMod Recovery 3.x CAN NOT BE USED to flash CM6. You will have to downgrade ClockworkMod Recovery to 2.x if you want to switch back to CM6.
INSTRUCTIONS:
- First time flashing CM 7 to your HD2 (or coming from another ROM)?
1. Unlock/root your device and install MAGLDR
2. Flash ClockworkMod Recovery 3.x
3. Do a Nandroid backup!
3. WIPE
4. Install the ROM
5. Optionally install the Google Addon
- Upgrading from earlier CM7?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
Download link
http://www.megaupload.com/?d=QATMMXF6
For CLK
http://www.megaupload.com/?d=C7QK5I92
Gapps -
http://goo-inside.me/gapps/gapps-gb-20110120-signed.zip
needed only after first flash, after concurrent flashes gapps will persist
Link to ClockworkMod-3 - http://www.multiupload.com/41E9UMRO45
Thx RaiderX303
You can flash any Clockwork but 150mb version is recommended
Should be MAGDLR/CLK compatible
Follow me on Twitter for Updates - charansingh
Nice..thanks!
Will try this in a jiffy!
sweet. cant wait to flash it!
thx charnsingh
edit:
any news on getting this official?
Here is the link to the cLK patch, that I did earlier
Forum Link: http://forum.xda-developers.com/showpost.php?p=12414534&postcount=1634
Scan or click the image to download:
with the following in the update zip
* boot.img
* PPP files/fixed
* 02recov to mount cache/recovery correctly to get ROM Manager working
After flashing the ROM, you need to flash the file in the attached file in the above post, to get it to work with cLK. This is with with charans kernel, and not any other
Can anyone else confirm this doesn't work out the box for CLK. I had to install tytung_r8 to get this to boot.
ubuntu, have a look @ post 4
this doesn't work out of the box with cLK, nope.
seadersn said:
ubuntu, have a look @ post 4
this doesn't work out of the box with cLK, nope.
Click to expand...
Click to collapse
Without wanting to look too much of a numpty, the second part of post 4 is an edit
When I asked it wasn't there.
nice work Charansingh. Thanks for all your work- amazing you have been able to do all this without a hd2 yourself.
I look forward to trying it out tomorrow- too late here now
I just dont get the dont post any bugs part... in the other theme I felt urged to do so. I am sure there is a reason for this, - should we stick to the older thread for bug reports??? Anyway, as usual thank you for the great hard work, trying it now
He's saying not to post bugs in issue trackers because we're not official CM7, this forum is not an issue tracker.
Thanks a lot Charnsingh!
deckoff said:
I just dont get the dont post any bugs part... in the other theme I felt urged to do so. I am sure there is a reason for this, - should we stick to the older thread for bug reports??? Anyway, as usual thank you for the great hard work, trying it now
Click to expand...
Click to collapse
post bugs here code.google.com/p/cm7leo
Reserved for future use.
CPU Settings in the Performance menu not working, WiFi still errors. Apart from that, it seems to work pretty well, though I suspect the ambient light sensor isn't working too well either, it seems overly bright.
arif-ali said:
This i the same as the other post, as the MD5SUM cane out to be the same
Here is the link to the cLK patch, that I did earlier
Forum Link: http://forum.xda-developers.com/showpost.php?p=12414534&postcount=1634
Scan or click the image to download:
with the following in the update zip
* boot.img
* PPP files/fixed
* 02recov to mount cache/recovery correctly to get ROM Manager working
After flashing the ROM, you need to flash the file in the attached file in the above post, to get it to work with cLK. This is with with charans kernel, and not any other
Click to expand...
Click to collapse
Hmmm...so is it a new release, or the same one from yest. since MD5 is same
Mafioso said:
Hmmm...so is it a new release, or the same one from yest. since MD5 is same
Click to expand...
Click to collapse
I would presume, the other thread is a dev thread for testing purposes, and this is a release thread
No, thats a release thread too but thats for daily builds n this for RC and Major releases for those who dont want to flash everyday
100% load
I have a 100% cpu usage with rc2 due to the system_server process.
Am I the only one, because nobody else mentions this??
The GPS doesn't appear to work
Sent from my HTC HD2 using XDA App
RC4 is out, Also Available on ROM Manager
Everything Except GPS libs are compiled from source
This google profile is outdated http://code.google.com/p/cm7leo/
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
This is the support thread for CM10.2 on the T-mobile Samsung Galaxy S II. It is still a major work in progress, so please make sure you have a backup that you can restore if you run into problems.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view http://changelog.bbqdroid.org for a full list of changes.
IRC SUPPORT:
Join us in #teamchopsticks or #cyanogenmod on the Freenode IRC network.
DO NOT ASK FOR SUPPORT IF YOU FLASH A DIFFERENT KERNEL!
The kernel packaged with CM10.2 is very tightly coupled with the ROM code. If you install a kernel different from the one in this ROM, please do not ask for any support.
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Please see our blog at http://www.teamchopsticks.org for installation, download links and release notes.
Install instructions:
Installation, Download, and Release Notes: http://www.teamchopsticks.org/p/cm102-release-notes.html
Contributing/Building: http://www.teamchopsticks.org/p/contributing.html
FAQ/Troubleshooting: http://www.teamchopsticks.org/p/faq.html
NOTE! You MUST use the recovery provided at the install link otherwise you will boot loop!
NOTE! You MUST wipe /cache, /data, and /system!! Also, make sure you install a 4.3-compatible gapps package. See our blog for more information.
The CyanogenMod team and TeamChopsticks would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Womp womp! Good job Nancy.
Thanks Guys!!
---------- Post added at 10:01 PM ---------- Previous post was at 09:51 PM ----------
I see the 20130729 gapps are posted, aren't the 20130813 the 4.3 set ?
so... is cwm permanent or will we be able to flash with twrp in the near future?
cause i personally cant stand cwm, got soo used to twrp and going to be hard to go back, i had some bad experiences with it
mycars12 said:
so... is cwm permanent or will we be able to flash with twrp in the near future?
cause i personally cant stand cwm, got soo used to twrp and going to be hard to go back, i had some bad experiences with it
Click to expand...
Click to collapse
Well, that's it for now - we technically don't maintain the recoveries, so you'll have to talk to the folks that support them directly. This particular one is the stock CM recovery that we added external_sd support to and it is build with the proper SELinux capability to prevent the reboot of doom seen with the CM10.1 based recoveries.
Ohhh yeah, just saw this drop on g+. Downloading now, thanks for the hard work. Will report back once up and running
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
so flash it using the provided recovery then... Switch back to twrp. UNDERSTOOD SIR
JesusWazBlack said:
so flash it using the provided recovery then... Switch back to twrp. UNDERSTOOD SIR
Click to expand...
Click to collapse
If you do that, you are on your own. The 10.1 recoveries do not know how to deal with the SELinux capable file system properly. You can run into some major snags that way.
This recovery, although it's very basic, works just fine for flashing zips and taking backups. Plus, it is the only one right now for the Hercules and Skyrocket that correctly works with the new filesystem for 4.3
car vs driver said:
If you do that, you are on your own. The 10.1 recoveries do not know how to deal with the SELinux capable file system properly. You can run into some major snags that way.
This recovery, although it's very basic, works just fine for flashing zips and taking backups. Plus, it is the only one right now for the Hercules and Skyrocket that correctly works with the new filesystem for 4.3
Click to expand...
Click to collapse
Oh alright. Guess no twrp then Lol. Thanks for the work! Appreciate it
No sweat man, I"m sure it's only a matter of time before the appropriate changes are made to TWRP and CWMR Touch. Our device is a bit of an oddball in how the storage volumes are setup, so this issue was really unique to us with 4.3
Woohoo! Thanks devs! This phone will remain me for a long time to come so this gives me a smile
Once again, thanks and I will flash and report back :good:
-------------------------------------------------------------------------------------------
Ahh CWM, the good old days xD
Recovery was fun to use lol
ROM works beautifully on my end, no issues so far. Smooth and fast.
Good work!
Hmm, does DSP Manager work properly for anyone?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 4
Joining the party..
Sent from my SAMSUNG-SGH-T989 using Tapatalk 4
so far so good, just missing the options to disable touch keys from lighting up. Going back to 4.2.2 until mainline nightlies show up.Also lack of TWRP is upsetting.
Thanks for the work you've been doing for us!! Can't wait for a dayly driver!
The only bug I've been able to spot so far is that there is still a reboot issue when accessing the external SD card from a gallery app. I can use quickpic just fine, but once I hit the SD card folder, the phone locks up and inevitably reboots.
Other than that, this is a very good alpha build of Android 4.3! Great work TeamChopsticks!
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
The recovery link isn't working.... anyone have a mirror that isn't d-h.st?
Edit: Finally downloaded...
Edit: anyone know if advanced settings are making a come back any time soon?
Man, I feel so late joining the 4.3 party.
Anyway, just flashing the CWM for CM10.2 now. Its not TWRP but as long as I can still revert back to my nandroid backup made with TWRP in case things go wonky, I'll be fine.
So far, CM10.2 alpha builds for Hercules runs great: feels a bit smoother than 4.2 and faster.
4.3
Thanks so much for the hard work devs this is great!!!
There is a NFC wakelock issue with the latest 10.2 rom, as shown by BetterBatteryStats.
NfcService:mEeWakeLock - 87.7%
I cannot turn off NFC either.
PREAMBLE
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G) with the a3000_prc_3gfull board/partition table. This is not going to work with FUSE devices!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery image
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I'll keep this thread short and simple. Want a changelog or a list of features? Then visit teamw.in.
DOWNLOAD
You can always get the latest build from here. You can flash them using an already existing recovery or by extracting and flashing it using SP Flash Tool.
CREDITs
chrmhoffmann
TeamWin and OmniROM
XDA:DevDB Information
TWRP for the Lenovo IdeaTab A3000-H, Tool/Utility for the Lenovo A3000
Contributors
Olivier
Source Code: https://github.com/omnirom/android_bootable_recovery
Version Information
Status: Stable
Created 2014-06-26
Last Updated 2014-12-28
Where download-link?
Well, I really want to install that, but this internal storage bug is really major.. What's a recovery software is good for if it can't flash things?
..And where is that link? ?
Sent from my Lenovo IdeaPad A3000-H using XDA mobile app
faissl said:
Well, I really want to install that, but this internal storage bug is really major.. What's a recovery software is good for if it can't flash things?
..And where is that link? ?
Sent from my Lenovo IdeaPad A3000-H using XDA mobile app
Click to expand...
Click to collapse
FUSE-firmware haven`t internal sdcard. What firmware are you used?
I just bought this tablet, is bootloader unlocked? I got a 4gb version of the A3000, can I normally fastboot flash recovery twrp.img?
Download link?
I just got Lenovo A3300-T Tablet from China, and I want to wipe off all things on that and just install some custom OS. Can some one please help me with the same.
Is A3300 same as A3000 as this post points to A3000 only. Please help me as I am having really hard time with this tablet.
Feche said:
Download link?
Click to expand...
Click to collapse
See DevDB.
anshumangoyal said:
I just got Lenovo A3300-T Tablet from China, and I want to wipe off all things on that and just install some custom OS. Can some one please help me with the same.
Is A3300 same as A3000 as this post points to A3000 only. Please help me as I am having really hard time with this tablet.
Click to expand...
Click to collapse
No. This is for A3000 and has only been tested on A3000-H.
Can you help me find it for Lenovo A3300-T Tablet. I want to install custom OS on that but not able to find it's recovery.
I'd give feedback if I found the download link, but I haven't.
kupyxa4444 said:
FUSE-firmware haven`t internal sdcard. What firmware are you used?
Click to expand...
Click to collapse
The last one there is, of 9-26
I flashed, and when I enter recovery I stuck in bootloop
A new build (TWRP 2.8.1.0) is up, it works just fine (I have fixed all of the bugs). Do note it will only work on a3000_prc_3gfull devices! I have also added a download link to the OP since you guys don't seem to like DevDB...
Olivier said:
A new build (TWRP 2.8.1.0) is up, it works just fine (I have fixed all of the bugs). Do note it will only work on a3000_prc_3gfull devices! I have also added a download link to the OP since you guys don't seem to like DevDB...
Click to expand...
Click to collapse
Please remove my bug reports
I have flashed that and no bugs till now
Thank you for your hard work
A new build (TWRP 2.8.3.0) is up, enjoy.
Olivier said:
A new build (TWRP 2.8.3.0) is up, enjoy.
Click to expand...
Click to collapse
Think you sir...
It is worked fine on my tablet
request
Sir @Olivier I am on build A3000_A422_013_025_140626_WW_CALL_FUSE....... previous version of recovery worked for me.....except emmc bug.......now I see that you have fixed the bug but the new update doesn't even boot on my device.....I know that you mentioned it will only work on pgrc_3g_full......and I am not on the same.....but I would just like to request a port to the above build number because......your cm11 also installs quite nicely over This build as reported by other users in cm11 thread.....I would love to help with beta testing if needed.....thanks in anticipation.....and I got this build by installing azam426's posted rom and then installing a little ota update.....
Keep up the good work..sir......great respect.....:good:
Do not do a full wipe. IMEI number has deleted the possibility. Deleted my imei i can't write imei. :/
Reupload please, because link is dead
reupload pls
Team Win Recovery Project 3.x, or TWRP3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
Features:
Data decryption
Zip flashing
Backup/Restore
All partitions can be backed up
Tianma and Truly panel support
Bugs:
Data decryption is not working on Android 10
Downloads and Installation:
https://twrp.me/xiaomi/xiaomiredmi8.html
If you have any problems while installing or using the recovery, feel free to ask questions below.
Device tree:
Latest device tree(Unofficial)
Official device tree
Thanks for your and TeamWin
For build worked device tree and worked recovery [emoji2]
UPD:
I read in device tree BoardConfig.mk
This recovery not support treble and SaR?
Or Twrp building this feature on default?
UPD2:
Truly touch screen not work
Please add hovatek_fw.bin in device tree
Отправлено с моего Redmi 8 через Tapatalk
altsec said:
Thanks for your and TeamWin
For build worked device tree and worked recovery [emoji2]
UPD:
I read in device tree BoardConfig.mk
This recovery not support treble and SaR?
Or Twrp building this feature on default?
UPD2:
Truly touch screen not work
Please add hovatek_fw.bin in device tree
Отправлено с моего Redmi 8 через Tapatalk
Click to expand...
Click to collapse
hovatek support added with this commit https://github.com/oguzbakir/twrp_device_xiaomi_olive/commit/68c2e8a6f0af7dc58c328f74355a2b90c01b6ac9 Further builds will have support for truly touch.
BOARD_BUILD_SYSTEM_ROOT_IMAGE flag is needed only on a/b devices i think. This device is not an a/b device, it is an Aonly device.
oguz298 said:
hovatek support added with this commit https://github.com/oguzbakir/twrp_d...mmit/68c2e8a6f0af7dc58c328f74355a2b90c01b6ac9 Further builds will have support for truly touch.
BOARD_BUILD_SYSTEM_ROOT_IMAGE flag is needed only on a/b devices i think. This device is not an a/b device, it is an Aonly device.
Click to expand...
Click to collapse
our device has a new type of system-as-root, it is simultaneously a only and SaR but gsi firmware is installed only a / b
This information for support gsi roms on devices
https://github.com/phhusson/treble_experimentations/wiki
Отправлено с моего Redmi 8 через Tapatalk
delete
removed
Great.. Official
Problem with touch
I've downloaded and installed the IMG, but the touch is not working. How can i fix this? (Step-By-Step pls, i'm beginner )
gaboca0817 said:
I've downloaded and installed the IMG, but the touch is not working. How can i fix this? (Step-By-Step pls, i'm beginner )
Click to expand...
Click to collapse
oguz298 said:
hovatek support added with this commit https://github.com/oguzbakir/twrp_d...mmit/68c2e8a6f0af7dc58c328f74355a2b90c01b6ac9 Further builds will have support for truly touch.
BOARD_BUILD_SYSTEM_ROOT_IMAGE flag is needed only on a/b devices i think. This device is not an a/b device, it is an Aonly device.
Click to expand...
Click to collapse
Looks like you have novatek screen, I do too, we'll have to wait for new build.
Edit: I read somewhere you can connect mouse and use it.
JaSomTy said:
Looks like you have novatek screen, I do too, we'll have to wait for new build.
Edit: I read somewhere you can connect mouse and use it.
Click to expand...
Click to collapse
I don't have type-C to USB cable, but thx
JaSomTy said:
Looks like you have novatek screen, I do too, we'll have to wait for new build.
Edit: I read somewhere you can connect mouse and use it.
Click to expand...
Click to collapse
It is waiting for code review. You can track updates from here https://gerrit.twrp.me/c/android_device_xiaomi_olive/+/1759
removed
oguz298 said:
Team Win Recovery Project 3.x, or TWRP3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
Features:
Data decryption
Zip flashing
Backup/Restore
All partitions can be backed up
Bugs:
No bugs so far
Downloads and Installation:
https://twrp.me/xiaomi/xiaomiredmi8.html
If you have any problems while installing or using the recovery, feel free to ask questions below.
Device tree:
Latest device tree(Unofficial)
Official device tree
Click to expand...
Click to collapse
Thanks Dude....
Very Nice....
Sent from my Redmi 8 using Tapatalk
JaSomTy said:
Looks like you have novatek screen, I do too, we'll have to wait for new build.
Edit: I read somewhere you can connect mouse and use it.
Click to expand...
Click to collapse
truly support added. can you test https://build.twrp.me/twrp-3.3.1-0-olive.img
oguz298 said:
truly support added. can you test https://build.twrp.me/twrp-3.3.1-0-olive.img
Click to expand...
Click to collapse
I can confirm that touch works.
Maybe I'm just stupid, but I can't get the recovery to stay. After flashing I went straight into recovery and I allowed modifications, then I went back to system to download Magisk and when I went back to recovery, the stock came up.
JaSomTy said:
I can confirm that touch works.
Maybe I'm just stupid, but I can't get the recovery to stay. After flashing I went straight into recovery and I allowed modifications, then I went back to system to download Magisk and when I went back to recovery, the stock came up.
Click to expand...
Click to collapse
Download magisk zip first. Then boot into recovery and flash magisk zip. Recovery will be permanent now.
JaSomTy said:
I can confirm that touch works.
Maybe I'm just stupid, but I can't get the recovery to stay. After flashing I went straight into recovery and I allowed modifications, then I went back to system to download Magisk and when I went back to recovery, the stock came up.
Click to expand...
Click to collapse
Thanks for testing.
Download magisk zip first. Then boot into recovery and flash magisk zip. Recovery will be permanent now.
oguz298 said:
Thanks for testing.
Download magisk zip first. Then boot into recovery and flash magisk zip. Recovery will be permanent now.
Click to expand...
Click to collapse
Thank you for doing this.
Yep, that worked! Just out of curiosity, is it a bug or do you now need root to have permanent custom recovery? I know that on my old phone this wasn't needed.
JaSomTy said:
Thank you for doing this.
Yep, that worked! Just out of curiosity, is it a bug or do you now need root to have permanent custom recovery? I know that on my old phone this wasn't needed.
Click to expand...
Click to collapse
It is just restoring stock recovery. I think there is another way to get a permanent TWRP. After flashing TWRP, reboot into recovery again and TWRP will be permanent.
Hello, please add treble support and system-as-root support, for flash custom gsi firmware
(Stock recovery supported treble and system-as-root)
Отправлено с моего Redmi 8 через Tapatalk