Develop Bugs

[ROM] [4.4.4] Official CyanogenMod 11 for Desire 816

CyanogenMod 11 is a free, community built distribution of Android 4.4 (KitKat) which greatly extends the capabilities of your phone.
This is the official Nightly Build of CM 11 for the HTC Desire 816 (all variants).
To hear about the latest updates and changes to CyanogenMod as a whole, please follow +CyanogenMod on Google+!​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions
You must unlock your bootloader via htcdev.com (unless ofc you are on the dev edition).
You must have a custom recovery installed
Go to http://get.cm/?device=a5 and download the latest CM11.0 nightly.
Locate 4.4 Gapps via a quick Google search.
Fully wipe your device from Recovery if you are not coming from CM11.0 already.
Reboot into recovery and install.
Changelog
You can find the latest Changelog here
Github
XDA:DevDB Information
Cyanogenmod A5, ROM for the HTC Desire 816
Contributors
Grarak, v_superuser
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked bootloader
Version Information
Status: Beta
Created 2014-10-25
Last Updated 2014-10-25

Please read before installing or posting
Dualsim variants (a5dwg, a5dug) are supported, but not fully functional. It's not possible to make calls if you selected 2G as preferred network mode. This is a known issue so please do not post any report about that! I would suggest you to only use one sim card with the dualsim variants.

Reserved, just in case.

CM official release finally
Thankyou
*Reserved

First to support!

Awesome work Grarak, glad to see official builds for out device!

I'll try tonight, downloading. I'll report result for 816x a5ul asap.:good:

Does this still require that modified cwm recovery, because I would much rather use Philz?

Do I flash it with CWM or TWRP or with Philz recovery ?
Or any recovery can flash this rom ? @Grarak
and does it has your grakernel ?

Gd news
Wow.......downloading n will report back:highfive:

thank you
Would be nice to have some screenshots

FoxyDrew said:
Does this still require that modified cwm recovery, because I would much rather use Philz?
Click to expand...
Click to collapse
mido3366 said:
Do I flash it with CWM or TWRP or with Philz recovery ?
Or any recovery can flash this rom ? @Grarak
and does it has your grakernel ?
Click to expand...
Click to collapse
Yes bros... It'll work with any recovery.
I flashed it with TWRP

1st time thinking of rooting , so don't mind me asking , but how much internal space we get free after this?
---------- Post added at 01:36 PM ---------- Previous post was at 01:35 PM ----------
jithumon said:
Yes bros... It'll work with any recovery.
I flashed it with TWRP
Click to expand...
Click to collapse
1st time thinking of rooting , so don't mind me asking , but how much internal space we get free after this?

abs3600 said:
1st time thinking of rooting , so don't mind me asking , but how much internal space we get free after this?
---------- Post added at 01:36 PM ---------- Previous post was at 01:35 PM ----------
1st time thinking of rooting , so don't mind me asking , but how much internal space we get free after this?
Click to expand...
Click to collapse
Same as stock... Need repartition to get more... But there is a risk of bricking

jithumon said:
Same as stock... Need repartition to get more... But there is a risk of bricking
Click to expand...
Click to collapse
so, just 1gb after intalling day to day apps?

Thank you

Grarak said:
CyanogenMod 11 is a free, community built distribution of Android 4.4 (KitKat) which greatly extends the capabilities of your phone.
This is the official Nightly Build of CM 11 for the HTC Desire 816 (all variants).
To hear about the latest updates and changes to CyanogenMod as a whole, please follow +CyanogenMod on Google+!​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions
You must unlock your bootloader via htcdev.com (unless ofc you are on the dev edition).
You must have a custom recovery installed
Go to http://get.cm/?device=a5 and download the latest CM11.0 nightly.
Locate 4.4 Gapps via a quick Google search.
Fully wipe your device from Recovery if you are not coming from CM11.0 already.
Reboot into recovery and install.
Changelog
You can find the latest Changelog here
Github
XDA:DevDB Information
Cyanogenmod A5, ROM for the HTC Desire 816
Contributors
Grarak, v_superuser
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked bootloader
Version Information
Status: Beta
Created 2014-10-25
Last Updated 2014-10-25
Click to expand...
Click to collapse
crashes when trying to change wallpaper, sometimes also when coming home from an app
also unable to add apn, 3g not working

abs3600 said:
crashes when trying to change wallpaper, sometimes also when coming home from an app
also unable to add apn, 3g not working
Click to expand...
Click to collapse
If you say something is not working then state the device your using. There are about 5 other versions of this device. Saying dual Sim isn't enough either.
Go into the bootloader and get the model where it says a5_***
Now you can say if its dual or single and more helpfully if you know where it came from. US, UK, Korea, India etc.
Sent from my 710C using XDA Free mobile app

jaysoblitzed said:
If you say something is not working then state the device your using. There are about 5 other versions of this device. Saying dual Sim isn't enough either.
Go into the bootloader and get the model where it says a5_***
Now you can say if its dual or single and more helpfully if you know where it came from. US, UK, Korea, India etc.
Sent from my 710C using XDA Free mobile app
Click to expand...
Click to collapse
A5_DWG India dual sim model, wallpaper thing was just a theme problem , but ya 3g is not working
Using single sim only in the 1st slot
Ty
Sent from my Desire 816 dual sim using XDA Free mobile app

abs3600 said:
crashes when trying to change wallpaper, sometimes also when coming home from an app
also unable to add apn, 3g not working
Click to expand...
Click to collapse
My dear frnd.....u can add APN . First boot up the device....do necessary things ( let both the sims search for networks and connect to network) Then reboot again. Now u can add APNs. U can set any of the sims to 3G. First change both sims to 2G.(using network settings) then change ur desired slot to 3G. Bt on 2G sim u will not be able to hear the other side while making or recievings calls...

[ABANDONED][ROM][BUILD 1 - 2016/01/06] CyanogenMod 12.1 - Bule Repack

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
NOTE: This is a cooked ROM based on Compiled from Source by Bule.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------​
This project no longer updated because I sold this device. Thanks for following my projects :good:​
-----------------------------------------------------------------------------------------------------------------​Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Click to expand...
Click to collapse
Features
It's a standard CyanogenMod 12.1 Bule build 20160102 porting plus this:
Deleted China app
Default system theme
Added Xperia keybord (deleted china keyboard)
Europe timezone
Fixed host for normal contacts synchronization
en local
Root explorer in data/app (can delete from home app)
.
Click to expand...
Click to collapse
Installation instructions
Download the ROM into internal/external SD.
Download GoogleApps into internal/external SD.
Create a backup with TWRP if need.
Factory Reset via TWRP.
Flash it via TWRP.
Flash GoogleApps via TWRP.
If you receive the error in the TWRP "mount: failed to mount /dev/block/platform/mtk-msdc.0/..." flash the rom again.
Wipe dalvik-cache and cache via TWRP.
Reboot and waiting to complete the ROM installation.
Click to expand...
Click to collapse
Update instructions
Download the ROM into internal/external SD.
Download GoogleApps into internal/external SD.
Create a backup with TWRP for security.
Flash it via TWRP.
Flash GoogleApps via TWRP.
If you receive the error in the TWRP "mount: failed to mount /dev/block/platform/mtk-msdc.0/..." flash the rom again.
Wipe dalvik-cache and cache via TWRP.
Reboot and waiting to complete the ROM update.
Click to expand...
Click to collapse
Xposed installation
For Xposed installation follow this thread and install the arm64-sdk22 version.
Click to expand...
Click to collapse
Know bugs
Notifications LED: working fine with some colors, red | green | cyano | pink | orange | white but the cm color selection go crazy sometimes, we working to fix this, but the notifications now working fine.
Engineering mode not working (in this moment into no one CM working).
FM Radio module not working.
Sim 2 not working (need testing).
Click to expand...
Click to collapse
Change log
Code:
Build 1 - 2016/01/06
[new] First release.
Click to expand...
Click to collapse
Downloads
External Download (sorry but I can't upload every build): The author abandoned for a moment for instability issue, when this rom come back again, I repost here too.
Click to expand...
Click to collapse
Important notes
This ROM is based on Bule Version with plus features get from other CyanogenMod available for our device. The most important in this ROM is stability with velocity. If you wanna try this ROM remember this is a testing ROM and all times we working for give the best experience with this ROM and device. If you have a problem you can write here or into the official site (I suggest to talking here because into XDA we have the best developers in the android ecosystem).
Click to expand...
Click to collapse
XDA:DevDB Information
[ABANDONED][ROM][BUILD 1 - 2016/01/06] CyanogenMod 12.1 - Bule Repack, ROM for the Redmi Note 2
Contributors
Namaless, vova_vafin, bule
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2016-01-06
Last Updated 2016-02-01

Reserved

You should tell us...WHY THIS ROM, WHY THIS THREAT?
There is the Daniel101 mod already which seems to have all this here PLUS other cool stuff.
Even if one doesn´t need the extra stuff....just ignore it. So no need for this ROM/THREAT here.
Otherwise please tell us what makes this here so special?

DJ-Tumor said:
You should tell us...WHY THIS ROM, WHY THIS THREAT?
There is the Daniel101 mod already which seems to have all this here PLUS other cool stuff.
Even if one doesn´t need the extra stuff....just ignore it. So no need for this ROM/THREAT here.
Otherwise please tell us what makes this here so special?
Click to expand...
Click to collapse
First for all thanks to post your idea with rude method.
Next you know some ppl can use some roms?
Third you can ignore the rom/thread and use what you want, example I used Miui stable but I testing all roms when come out for funny and for help other ppl.
What you think resolve with your post? Nothing...
Sorry if you think I'm rude, but I reply with the same method you post here...

The owner of the rom have removed from public access, I talking with him if want repost or I request deleting to this thread. Sorry for inconvenience.

[ROM][PORT][TEST]CM13 Xperia M5

Xperia M5 First CyanogenMod Rom
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
this rom is beta port and need tester
Working:
You tell me
Bugs:
You tell me
ROM link
Beta 1 [COLOR="Red"]NO KERNEL SOURCE =[/COLOR]
Beta 2 [COLOR="Red"]NO ES BUENO :([/COLOR]
Installation Instructions:
-unlock bootloder
-root and twrp install
-zip flash via twrp
-wipe data
-reboot
rom base customized tr marsmallow
this rom is beta and need tester.ıf you test and tell me work, TRXteam port new roms on xperia m5.
thanks @ByBlaCk @krkshalill @TheShadow35
Contributors
TRXteam,ByBlaCk,krkshalill,TheShadow35
ROM OS Version: Marsmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP+Any Rooted Stock Rom
Based On: CyanogenMod
Version Information
Status: Beta

How nice is that. Finally some custom roms are avaiable for m5.

jonathangrag said:
How nice is that. Finally some custom roms are avaiable for m5.
Click to expand...
Click to collapse
thanks.
my team port xperia m5 custom roms but need tester and tell me bugs.ıf some people test and report bug ı port new roms(eg.flyme cm14) xperia m5 and ı fix bugs.

Thread moved to Android Development. I would like to see kernel source very soon.
thx

Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.

グリッチ said:
Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.
Click to expand...
Click to collapse
this rom beta and some devices was boot loop.My team cant fix that and not update.If you like cm13 and you port it like devices(e.g elephone wowney lite,infinix zero 3,redmi note 2,redmi note 3(Mediatek),or any mt67xx eg.jıayu s3,jıayu s3 plus,....)

グリッチ said:
Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.
Click to expand...
Click to collapse
https://mega.nz/#!dhNC2Qha!HeCEBti25M1ecmxUFhsZ_AZE_dX-amjMJZL-OZea-sc
if you test its new rom wait 30 minutes black screen after flashed and reboot,ıf work you lucky guy,but not work you unlucky guy,My team Closed this thread because some devices boot loop or not working but some devices working,ı dont known this.If fix , share it.
.Have a good day.
thread closed.

TRXteam said:
https://mega.nz/#!dhNC2Qha!HeCEBti25M1ecmxUFhsZ_AZE_dX-amjMJZL-OZea-sc
if you test its new rom wait 30 minutes black screen after flashed and reboot,ıf work you lucky guy,but not work you unlucky guy,My team Closed this thread because some devices boot loop or not working but some devices working,ı dont known this.If fix , share it.
.Have a good day.
thread closed.
Click to expand...
Click to collapse
Ok, I downloaded it, but I just want to make sure before flashing...
Your instructions say flash zip > wipe data.
Should I do that or Wipe data (data only?) > flash zip?

TRXteam said:
Xperia M5 First CyanogenMod Rom
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
this rom is beta port and need tester
Working:
You tell me
Bugs:
You tell me
ROM link
https://mega.nz/#!Fg1AQCyA!SlGKtLdQmLJbFw8JHeulDa4b4KznRRkkYtusK1Ea0K0
Installation Instructions:
-unlock bootloder
-root and twrp install
-zip flash via twrp
-wipe data
-reboot
rom base customized tr marsmallow
this rom is beta and need tester.ıf you test and tell me work, TRXteam port new roms on xperia m5.
thanks @[email protected]@TheShadow35
Contributors
TRXteam,ByBlaCk,krkshalill,TheShadow35
ROM OS Version: Marsmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP+Any Rooted Stock Rom
Based On: CyanogenMod
Version Information
Status: Beta
Click to expand...
Click to collapse
will this rom pass safetynet api test?

Hello, this ROM is compatible with Sony Xperia M5 E5603, E5606 and E5653? It's correct?
The version dualSIM "hollyds" is compatible? Thank you very much for the support!

ataraxist said:
will this rom pass safetynet api test?
Click to expand...
Click to collapse
ı dont known,you test and look it.:good:

pickmod said:
Hello, this ROM is compatible with Sony Xperia M5 E5603, E5606 and E5653? It's correct?
The version dualSIM "hollyds" is compatible? Thank you very much for the support!
Click to expand...
Click to collapse
not support hollyds,this rom compatible with hollyss(eg.E5603)

グリッチ said:
Ok, I downloaded it, but I just want to make sure before flashing...
Your instructions say flash zip > wipe data.
Should I do that or Wipe data (data only?) > flash zip?
Click to expand...
Click to collapse
グリッチ said:
Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.
Click to expand...
Click to collapse
rom update beta2 and need tester.

TRXteam said:
rom update beta2 and need tester.
Click to expand...
Click to collapse
rom not working: after install file via twrp and reboot device i get the bootloop. I use TWRP 3.0.2.2. After try wipe cache partition i get error message "can't umount /cache: device busy". Tested b1 and b2 too.

spark1991z said:
rom not working: after install file via twrp and reboot device i get the bootloop. I use TWRP 3.0.2.2. After try wipe cache partition i get error message "can't umount /cache: device busy". Tested b1 and b2 too.
Click to expand...
Click to collapse
thanks your reply,My team goes to holiday and ı am alone but ı work it.

I'm downloaded the cm13 sources for build cm13 with kernel 3.10.[61/72] and binaries based on redmi note 2. If you want, i can help for you. Send me your usable binaries (/vendor and /device/ folders)

spark1991z said:
I'm downloaded the cm13 sources for build cm13 with kernel 3.10.[61/72] and binaries based on redmi note 2. If you want, i can help for you. Send me your usable binaries (/vendor and /device/ folders)
Click to expand...
Click to collapse
okay thanks your help.:good:

spark1991z said:
I'm downloaded the cm13 sources for build cm13 with kernel 3.10.[61/72] and binaries based on redmi note 2. If you want, i can help for you. Send me your usable binaries (/vendor and /device/ folders)
Click to expand...
Click to collapse
I dont understand... Sony opened sources for our device - why are you need sources for other device??!

Thread closed as there is no kernel source available. I have warned the OP a few days ago - without any success apparently
Here's a nice lecture about being a good developer. Rules are made to follow them and I fully expect it from you.
Regards,
Tom

[ABANDONED][RECOVERY][UNOFFICIAL][SOURCE-BUILT][WIP] TWRP for Huawei Honor 3C

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is an unofficial TWRP 3.x build for the Huawei Honor 3C (h30u10/H30-U10)
This project is abandoned! I'll reopen the thread if I have any progress in the future... If you want anything from me you can contact me in my email address, in Telegram (@iamnotstanley) or in private message.
Only use this binary with your own responsibility, and please read the "known issues" list.
Working:
Everything, except the things in the "known issues" list.
TWRP functional checklist, but in this list not everything applies for our device
Known issues:
flash/restore image (boot&recovery) (installing with a zip [if you're using codelover's fixed update-binary] and backup working correctly) **need help **
Download:
Latest and older versions: See the DevDB Downloads page or click here. (Mirror)
Install:
You can install this recovery in 4 way:
Using an another version of TWRP: install the downloaded zip
Using an another version of TWRP: extract the zip and flash the image
Using SP Flash Tools: extract the zip and flash the image
Using Flashify or other flashing app: extract the zip and flash the image
Revert easily to codelover's TWRP:
Download from here the UPDATE-TWRP-2.8.6.0_H30-U10.zip or the UPDATE-TWRP-2.8.6.0_V2_H30-U10_EU.zip and install it inside the TWRP, after that if you reboot to recovery, you will see the old version.
Changelog:
TWRP changelog: here
Device changelog:
3.1.1-0:
Updated to the latest version.
We still have the the "image flash" problem!
3.1.0-0:
First release for Huawei Honor 3C (h30u10)
Built with omnirom android-5.1 tree
Prebuilt kernel: EU B306 (3.4.67)
Screenshots: See the DevDB Screenshots page or click here.
Credits:
iamnotstanley
codelover
carliv for his bootimg module
MSF-Jarvis for his initial device tree
TeamWin team
omnirom team
XDA:DevDB Information
TWRP for Huawei Honor 3C, Device Specific App for the Honor 3C
Contributors
iamnotstanley, codelover, carliv, MSF-Jarvis, TeamWin team & omnirom team
Source Code: https://github.com/iamnotstanley/android_device_huawei_h30u10/tree/android-5.1
Version Information
Status: Abandoned
Current Beta Version: 3.1.1-0
Beta Release Date: 2017-05-13
Created 2017-04-01
Last Updated 2018-01-29

Reserved

Nice woork bro
why did not you patch it bro for img files flashing??
Can you Send Me sources

hassanjavaid8181 said:
Nice woork bro
why did not you patch it bro for img files flashing??
Can you Send Me sources
Click to expand...
Click to collapse
Thanks.
I'm working on the image flashing fix, but I'm building from source code and nearly scratch, and now I finding the cause of the problem. I'll fix it as soon as I can.
My source code (TWRP device tree) is in the post: https://github.com/iamnotstanley/android_device_huawei_h30u10

iamnotstanley said:
Thanks.
I'm working on the image flashing fix, but I'm building from source code and nearly scratch, and now I finding the cause of the problem. I'll fix it as soon as I can.
My source code (TWRP device tree) is in the post: https://github.com/iamnotstanley/android_device_huawei_h30u10
Click to expand...
Click to collapse
really appreciate your efforts:good:
good luck

Bro can we flash magisk by this version.

mnumaher said:
Bro can we flash magisk by this version.
Click to expand...
Click to collapse
If Magisk doesn't work in the older or other recoveries, it won't work in this recovery.
I think, because Magisk modify the boot image and MT6582 phones has a boot image with a special MTK header, and I think Magisk currently doesn't support this format. (Like the "new" systemless SuperSU.)

Thanks bro bringing twrp 3x to our device!!
I'm hoping you keep maintain this project as well till reach bugless

iamnotstanley said:
If Magisk doesn't work in the older or other recoveries, it won't work in this recovery.
I think, because Magisk modify the boot image and MT6582 phones has a boot image with a special MTK header, and I think Magisk currently doesn't support this format. (Like the "new" systemless SuperSU.)
Click to expand...
Click to collapse
Thanks.
Is touch working correctly in this version?

mnumaher said:
Thanks.
Is touch working correctly in this version?
Click to expand...
Click to collapse
For me, yes. This version has B306 kernel. If your phone's touch is working on B306, it'll work, but it's not, you will need to change kernel. You can try this first, but if isn't working, tell me which kernel has working touch for your phone and I'll make a version for that.
Kernels: https://forum.xda-developers.com/showpost.php?p=60721740&postcount=861
Rayquaza said:
Thanks bro bringing twrp 3x to our device!!
I'm hoping you keep maintain this project as well till reach bugless
Click to expand...
Click to collapse
Thanks for your support. I'll maintain this project while I have this phone. I'm trying to fix the img flash issue, but I think I need help with it.

iamnotstanley said:
For me, yes. This version has B306 kernel. If your phone's touch is working on B306, it'll work, but it's not, you will need to change kernel. You can try this first, but if isn't working, tell me which kernel has working touch for your phone and I'll make a version for that.
Kernels: https://forum.xda-developers.com/showpost.php?p=60721740&postcount=861
Thanks for your support. I'll maintain this project while I have this phone. I'm trying to fix the img flash issue, but I think I need help with it.
Click to expand...
Click to collapse
Ty bro it's working absolutely fine.
When we will be able to flash img.

mnumaher said:
Ty bro it's working absolutely fine.
When we will be able to flash img.
Click to expand...
Click to collapse
I'm working on it, but I think I need help to fix that. I hope maybe somebody can help me.

working fine cheers!

iamnotstanley said:
I'm working on it, but I think I need help to fix that. I hope maybe somebody can help me.
Click to expand...
Click to collapse
hi and great work, thanks for that
codelover maybe have a patch for that, past time he say i forget it, but can help you to know how solve that

Hi @iamnotstanley, to answer your question:
If i recall correctly i did explained about the problem in my thread earlier - the problem lies on 3C KK kernels. (MTK variant only)
H30-U10 stock KK kernels do not permit writing to the boot partition (/dev/bootimg) directly, the partition is mounted as read only.
Interestingly, there are some ported recoveries out there that doesn't work, and user doesn't even know about it. (eg: ROM appeared to be flashed successfuly but failed to boot because boot.img didn't get through, missing assert() to stop)
If you find a working H30-U10 recovery that can write to boot for 3C, it's likely using JB kernel or KK kernel from other 6582 compatible KK kernel, not sure if someone has compiled a fully working 3C kernel.
With JB kernel, you will be missing SELinux & some other features, while KK kernel from other device is dangerous IMHO, unless you are 100% sure it's compatible, sometimes i wonder whether those permanently bricked 3C with partition error were using these 'patched' recoveries...
My TWRP 2.8.6.0 has been customized to deal with this, i wrote a few C custom functions for twrp, it works like this;
1) read the partition table while flashing, loop through until you find the details for target partition that you need to write.
2) calculate the size and offset to write (you will need to convert the hex to int, then some math again to get the bs, skip, etc value for dd)
3) use 'dd' to write directly to mmcblock0, instead of C fwrite to the specific built-in partition mount point, eg: /dev/bootimg
Wish i could help more, unfortunately i don't have 3C data with me anymore (hdd crashed), and my work is killing me.
Good luck with that!

codelover said:
Hi @iamnotstanley, to answer your question:
...
Click to expand...
Click to collapse
Hi!
Thanks for your answer, I really appreciate your help.
So the problem is mainly in the kernel. I don't think I can fix this, but I'll try after my exams.

TWRP updated to 3.1.1-0
Hello guys!
I updated the TWRP to 3.1.1-0 yesterday. Unfortunately it still have the image flash issue. If you're interested you can download from the DevDB Downloads page or the Github mirror.

Huawei Honor 3C H30-U10
Hello guys
I m new on this site and want to know about my huawei honor 3c h30-u10
I want to root and install TWRP custom recovery in my cell without PC. .
I am using EMUI 3 and android ver 4.4.2 whereas build number is B310
Please any one give me detail with images.
Thanx in advance

SHBhatti said:
Hello guys
I m new on this site and want to know about my huawei honor 3c h30-u10
I want to root and install TWRP custom recovery in my cell without PC. .
I am using EMUI 3 and android ver 4.4.2 whereas build number is B310
Please any one give me detail with images.
Thanx in advance
Click to expand...
Click to collapse
Try rooting with root applications such as Baidu root and etc.

TamaziAce said:
Try rooting with root applications such as Baidu root and etc.
Click to expand...
Click to collapse
I was Try to root with king root, king root said that your device is rooted successfully but root checker said no root???? what should i do now..?

[RECOVERY][OFFICIAL][3.3.1][olive]TWRP for Xiaomi Redmi 8

Team Win Recovery Project 3.x, or TWRP3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
Features:
Data decryption
Zip flashing
Backup/Restore
All partitions can be backed up
Tianma and Truly panel support
Bugs:
Data decryption is not working on Android 10
Downloads and Installation:
https://twrp.me/xiaomi/xiaomiredmi8.html
If you have any problems while installing or using the recovery, feel free to ask questions below.
Device tree:
Latest device tree(Unofficial)
Official device tree

Thanks for your and TeamWin
For build worked device tree and worked recovery [emoji2]
UPD:
I read in device tree BoardConfig.mk
This recovery not support treble and SaR?
Or Twrp building this feature on default?
UPD2:
Truly touch screen not work
Please add hovatek_fw.bin in device tree
Отправлено с моего Redmi 8 через Tapatalk

altsec said:
Thanks for your and TeamWin
For build worked device tree and worked recovery [emoji2]
UPD:
I read in device tree BoardConfig.mk
This recovery not support treble and SaR?
Or Twrp building this feature on default?
UPD2:
Truly touch screen not work
Please add hovatek_fw.bin in device tree
Отправлено с моего Redmi 8 через Tapatalk
Click to expand...
Click to collapse
hovatek support added with this commit https://github.com/oguzbakir/twrp_device_xiaomi_olive/commit/68c2e8a6f0af7dc58c328f74355a2b90c01b6ac9 Further builds will have support for truly touch.
BOARD_BUILD_SYSTEM_ROOT_IMAGE flag is needed only on a/b devices i think. This device is not an a/b device, it is an Aonly device.

oguz298 said:
hovatek support added with this commit https://github.com/oguzbakir/twrp_d...mmit/68c2e8a6f0af7dc58c328f74355a2b90c01b6ac9 Further builds will have support for truly touch.
BOARD_BUILD_SYSTEM_ROOT_IMAGE flag is needed only on a/b devices i think. This device is not an a/b device, it is an Aonly device.
Click to expand...
Click to collapse
our device has a new type of system-as-root, it is simultaneously a only and SaR but gsi firmware is installed only a / b
This information for support gsi roms on devices
https://github.com/phhusson/treble_experimentations/wiki
Отправлено с моего Redmi 8 через Tapatalk

delete

removed

Great.. Official

Problem with touch
I've downloaded and installed the IMG, but the touch is not working. How can i fix this? (Step-By-Step pls, i'm beginner )

gaboca0817 said:
I've downloaded and installed the IMG, but the touch is not working. How can i fix this? (Step-By-Step pls, i'm beginner )
Click to expand...
Click to collapse
oguz298 said:
hovatek support added with this commit https://github.com/oguzbakir/twrp_d...mmit/68c2e8a6f0af7dc58c328f74355a2b90c01b6ac9 Further builds will have support for truly touch.
BOARD_BUILD_SYSTEM_ROOT_IMAGE flag is needed only on a/b devices i think. This device is not an a/b device, it is an Aonly device.
Click to expand...
Click to collapse
Looks like you have novatek screen, I do too, we'll have to wait for new build.
Edit: I read somewhere you can connect mouse and use it.

JaSomTy said:
Looks like you have novatek screen, I do too, we'll have to wait for new build.
Edit: I read somewhere you can connect mouse and use it.
Click to expand...
Click to collapse
I don't have type-C to USB cable, but thx

JaSomTy said:
Looks like you have novatek screen, I do too, we'll have to wait for new build.
Edit: I read somewhere you can connect mouse and use it.
Click to expand...
Click to collapse
It is waiting for code review. You can track updates from here https://gerrit.twrp.me/c/android_device_xiaomi_olive/+/1759

removed

oguz298 said:
Team Win Recovery Project 3.x, or TWRP3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
Features:
Data decryption
Zip flashing
Backup/Restore
All partitions can be backed up
Bugs:
No bugs so far
Downloads and Installation:
https://twrp.me/xiaomi/xiaomiredmi8.html
If you have any problems while installing or using the recovery, feel free to ask questions below.
Device tree:
Latest device tree(Unofficial)
Official device tree
Click to expand...
Click to collapse
Thanks Dude....
Very Nice....
Sent from my Redmi 8 using Tapatalk

JaSomTy said:
Looks like you have novatek screen, I do too, we'll have to wait for new build.
Edit: I read somewhere you can connect mouse and use it.
Click to expand...
Click to collapse
truly support added. can you test https://build.twrp.me/twrp-3.3.1-0-olive.img

oguz298 said:
truly support added. can you test https://build.twrp.me/twrp-3.3.1-0-olive.img
Click to expand...
Click to collapse
I can confirm that touch works.
Maybe I'm just stupid, but I can't get the recovery to stay. After flashing I went straight into recovery and I allowed modifications, then I went back to system to download Magisk and when I went back to recovery, the stock came up.

JaSomTy said:
I can confirm that touch works.
Maybe I'm just stupid, but I can't get the recovery to stay. After flashing I went straight into recovery and I allowed modifications, then I went back to system to download Magisk and when I went back to recovery, the stock came up.
Click to expand...
Click to collapse
Download magisk zip first. Then boot into recovery and flash magisk zip. Recovery will be permanent now.

JaSomTy said:
I can confirm that touch works.
Maybe I'm just stupid, but I can't get the recovery to stay. After flashing I went straight into recovery and I allowed modifications, then I went back to system to download Magisk and when I went back to recovery, the stock came up.
Click to expand...
Click to collapse
Thanks for testing.
Download magisk zip first. Then boot into recovery and flash magisk zip. Recovery will be permanent now.

oguz298 said:
Thanks for testing.
Download magisk zip first. Then boot into recovery and flash magisk zip. Recovery will be permanent now.
Click to expand...
Click to collapse
Thank you for doing this.
Yep, that worked! Just out of curiosity, is it a bug or do you now need root to have permanent custom recovery? I know that on my old phone this wasn't needed.

JaSomTy said:
Thank you for doing this.
Yep, that worked! Just out of curiosity, is it a bug or do you now need root to have permanent custom recovery? I know that on my old phone this wasn't needed.
Click to expand...
Click to collapse
It is just restoring stock recovery. I think there is another way to get a permanent TWRP. After flashing TWRP, reboot into recovery again and TWRP will be permanent.

Hello, please add treble support and system-as-root support, for flash custom gsi firmware
(Stock recovery supported treble and system-as-root)
Отправлено с моего Redmi 8 через Tapatalk