Related
Product Link: http://amzn.com/B0062V037Q
I'm not really prepared to give a full review of this case yet since I just put it on today and haven't "lived" with it for very long, but I wanted to go ahead and post some pics for anyone who might be interested. These pics are of a Galaxy Nexus LTE with extended battery. I believe it's designed to fit the LTE with standard battery, but it fits just fine with the extended battery.
What I can tell so far -- the glossy/gel part of this case is rubbery and sticks to hard surfaces, but doesn't seem to stick to fabric/clothes so i don't think it'll be a problem getting in and out of pockets. The matte part is like a textured plastic -- very smooth and not sticky at all. The gel fits around the front and sticks up only a fraction above the screen like it's supposed to, so you can lay it face down and the screen won't touch the surface. Anyway, here are the pics.
If I'm missing any angles that anyone wants to see, let me know and I'll take more pics. I'll try to add some more opinions about this case after I've carried it around a little.
how flexible is the case?
Thanks for sharing large photos, it really helps to show the fit of the case. Think I'll go ahead and order one.
For those who have a different case, it would be nice to see those cases posted in a similar fashion.
I have this case too and I believe it was molded to fit the GSM version. I've had both versions of the phone and it fit the GSM version perfectly. The Verizon version (even without the extended batt) does not fit quite right. You can see it clearly in your 4th pic how it bulges out and does not hug the edges of the screen area properly. I also don't care for the button areas, as they are both enclosed and make it difficult to locate the buttons by feel.
Thanks. I just picked up one in green and it seems to fit fine over the extended battery. I am still able to find the power button because it has a different texture than the rest of the side.
It will probably take a few days to see if it is better out worse that the gel I got at Verizon. So far, so good. And it was on sale!
Sent from my Galaxy Nexus using xda premium
You can find this for 2 dollars on Ebay.
http://www.ebay.com/sch/i.html?_fro...TPU+Gel+Case+for+Samsung+Galaxy+Google+Nexus+
ludow said:
You can find this for 2 dollars on Ebay.
http://www.ebay.com/sch/i.html?_fro...TPU+Gel+Case+for+Samsung+Galaxy+Google+Nexus+
Click to expand...
Click to collapse
i don't think that is the same case. the one i got is made by Qubits.
@halo0: yes, i can tell this case wasn't made for the extended battery, and i can see what you're talking about in picture 4, but i don't notice any bulge in actual use, and i'm pretty anal about my cases.
also, like @VivianC mentioned, it's easy to find the power and volume buttons by touch because of the difference in texture.
ludow said:
You can find this for 2 dollars on Ebay.
http://www.ebay.com/sch/i.html?_fro...TPU+Gel+Case+for+Samsung+Galaxy+Google+Nexus+
Click to expand...
Click to collapse
My case was around £3 and is IDENTICAL to the pictures above and this link.
Don't spend more than $10/£5 on this case.
The reason why I am getting rid of this case is because it makes the screen/sleep button quite weird to press. (However, having this case for nearly a month you get used to it)
Sadly, lint and dirt collects easily around the lip of the case where it touches the screen.
There are NO issues with this case pulling up the screen protector edge. (I've read how someone said cheap TPU cases sometimes do this)
Does provides good protection for small knocks and drops! - Dropped my phone on wood floor twice and was well protected!
Got these on amazon for 8 each.green one for my girl black for myself. Barely noticeable and I actually think it fits better with the extend battery than the standard, mine (with extended battery) just feels better than hers without. Good skin, very pleased with it
Sent from my Galaxy Nexus using XDA App
I have three different colors (red, clear, and black) of this case and I have to say I am very pleased with them. They were made for the GSM version but they still fit pretty good with the CDMA's. (Small buldge that was previously mention) Paid $5 for the red and the clear one. $8 for the black one. I'd recommend it for those prices.
I've got this and I really don't like the button covers. They're to stiff for my liking. Amazon carries this for $9.99 with two screen protectors and a micro fiber pouch.
Sent from my ICY+ Galaxy Nexus
Hey guys,
Back to making vids! Sorry for the month-long break!
Got my hands on the Incipio Silicrylic for the Galaxy Nexus, this is a two-piece hybrid style case that features a hard plastic exterior with a soft silicone interior. Fit on the phone is perfect and all cutouts are accessible, this case offers a decent level of protection for everyday use and is quite stylish as well. Check out the full review for all info!
Video Review:
nice video mate keep it up
Welcome! I've got a review on the SGP Ultra Capsule coming up soon as well. Stay tuned for that.
Good review. I'm glad you mentioned the gap at the back (something I noticed with my own Sylicrilic, on my GSM phone) and the flimsy sides, which really bugs me. I wish they extended a 1 cm small section of the plastic over the sides which would have helped control this problem.
Looking forward to the capsule review (I'm considering that case). Please mention if the case follows the contour display along the front, and if there is a gap on the back for the GSM version, similar to the Sylicrilic.
ChrisAG said:
Good review. I'm glad you mentioned the gap at the back (something I noticed with my own Sylicrilic, on my GSM phone) and the flimsy sides, which really bugs me. I wish they extended a 1 cm small section of the plastic over the sides which would have helped control this problem.
Looking forward to the capsule review (I'm considering that case). Please mention if the case follows the contour display along the front, and if there is a gap on the back for the GSM version, similar to the Sylicrilic.
Click to expand...
Click to collapse
Thanks for the feedback! I've posted the review of the capsule case now - I didn't exactly mention about the contour display, but I did mention that there is great attention to detail with regards to case construction, and it does follow the curved display.
On a GSM version without extended battery there is a very, very, very! slight gap, which does not bother me at all. I'm using the case with the extended battery and it fits a little tight, but I prefer it that way.
Hope I helped! Thanks for being a viewer!
i got this case today with the verizon version of the phone. im also using the extended battery. but i am not using the battery cover since i didnt like the gaps on the side. is it safe to use the phone without the battery cover and just the case?
Can confirm there is no gap on the VZ version (and it's all black instead of two-tone). Had it for several days and works wonderfully.
Ando_O said:
i got this case today with the verizon version of the phone. im also using the extended battery. but i am not using the battery cover since i didnt like the gaps on the side. is it safe to use the phone without the battery cover and just the case?
Click to expand...
Click to collapse
I wouldn't say it is safe, but you should be fine for the most part. The only issue I see arising is if you were to drop the phone, it could cause the battery to move and turn off the phone.
Does anyone know of a belt clip that works with this case?
Sent from my Transformer Prime TF201 using xda premium
ChrisAG said:
Good review. I'm glad you mentioned the gap at the back (something I noticed with my own Sylicrilic, on my GSM phone) and the flimsy sides, which really bugs me. I wish they extended a 1 cm small section of the plastic over the sides which would have helped control this problem.
Looking forward to the capsule review (I'm considering that case). Please mention if the case follows the contour display along the front, and if there is a gap on the back for the GSM version, similar to the Sylicrilic.
Click to expand...
Click to collapse
thanks for the review man.
the awful flimsy sides really ruined it for me. i actually had this case on order from amazon for $20 , and canceled it after seeing this review. the edges of the front flapping aroundlike that looks terrible compared to some of the much tighter fitting tpu cases.
glad i read this forum occasional as that gave me the heads up to get the cruzer lite case for half the cost.
Thank you for taking the time to do a review. Wish I had watched it before getting this case. The look is great but I have trouble getting the plastic secured to the rubber part of the case. However, it will work with the Samsung 2100 mAh extended life battery, and it has taken quite a bit of abuse from me, so it is doing its job.
Hey Guys I'm getting a Galaxy Note (White) and I want a good Case that has the following:
-Slim, with little bulk
-White Preferably but can be different
-Raises screen from flat surface
-Covers Buttons Preferably but doesn't have to
-All around good protection and can take a fall!
If anyone has a case or knows of a case like that please feel free to leave a comment!
Thanks for the Help!
I have the SGP Ultra Capsule White case love it so far no complaints
I have the.ringke slim. probably the slimmest around. Took a lot of droppings. Still great.
Sent from my GT-N7000 using XDA
http://www.amazon.com/BoxWave-Samsu...1ZPI/ref=sr_1_2?ie=UTF8&qid=1334506138&sr=8-2
I have that case and absolutely love it. It's not too thick 3mm? I have no idea. But the tpu sides make it easy to grip and the frosted plastic back gives it a nice look imo. Cut outs are PERFECT too. pressing the side buttons can be a little hard sometimes though, but I usually use the home button to wake the phone.
I have been using a Rearth Ringke Slim since day one and I love it, especially since it has plugs for the charging port and the headphone jack. The screen protector they include is pretty good as well. It's a bit on the expensive side but I think it's worth it. The bottom lip was a millimeter or two off and they sent me another one. I think the white on white looks beautiful.
http://www.rearthusa.com/galaxy_note_slim.html
You should take a look at the Seidio Active Cases. Exceptional quality.
In-Depth Review
Official Store: http://www.seidioonline.com/category-s/7741.htm
Look for them on eBay if you intend to buy it. It's a lot cheaper there.
n023b said:
I have the SGP Ultra Capsule White case love it so far no complaints
Click to expand...
Click to collapse
I can also second the SGP Ultra Capsule White. It does all that you ask for. The build quality is fantastic where the cut-outs for ports are near perfect. Bright white colour with a slightly glossy look.
Aslo, for the ~£18 you also get a very good screen protector.
n023b said:
I have the SGP Ultra Capsule White case love it so far no complaints
Click to expand...
Click to collapse
Yeah I was thinking about that one today, but supposedly it turns yellow in a month lol ??
I am using original one - ETC-1E1LWECSTD and I am very satisfied...
Sent from my GT-N7000 using xda premium
Heronization said:
Yeah I was thinking about that one today, but supposedly it turns yellow in a month lol ??
Click to expand...
Click to collapse
Can anyone with an SGP confirm or deny?
If you like your case, please also tell us how long you've had it and the condition it is in today.
i'm also looking for this kind of case, can someone confirm whether the SGP Ultra capsule white is a finger print magnet due to its glossy surface?
I have the Boxwave White TPU with Frosted back case mentioned earlier. It's a nice case but a little thick. The back is pretty touch and is thick enough so that the camera glass is protected.
My biggest complaint is that it picked up blue stains from a pair of new jeans. Took a couple of weeks for the blue to disappear from the case. After about 3 months, the tpu sides are starting to have a very slight yellowish color to them. Tried scrubbing it with Comet Cleaner but did not help.
I also agree that the volume and power buttons can be a little difficult to push and the volume buttons kind of creak, its the TPU rubbing against the the button.
It's not my favorite case I've owned but I'm also not in a hurry to replace it.
gedster314 said:
I have the Boxwave White TPU with Frosted back case mentioned earlier. It's a nice case but a little thick. The back is pretty touch and is thick enough so that the camera glass is protected.
My biggest complaint is that it picked up blue stains from a pair of new jeans. Took a couple of weeks for the blue to disappear from the case. After about 3 months, the tpu sides are starting to have a very slight yellowish color to them. Tried scrubbing it with Comet Cleaner but did not help.
I also agree that the volume and power buttons can be a little difficult to push and the volume buttons kind of creak, its the TPU rubbing against the the button.
It's not my favorite case I've owned but I'm also not in a hurry to replace it.
Click to expand...
Click to collapse
Thanks for the feedback! After posting this a lot of people say White Cases turn yellow or start to stain... So I think I am going to go with a Capdase Alumor Metal case instead! Thanks!! you just saved me from a crappy purchase!
Noreve Samsung Galaxy Note Tradition B leather case
Ordered one of these Noreve for Samsung Galaxy Note Tradition B leather case [21130TB] they come almost in all colors. Heard/read good things about cases of this French brand [Noreve Saint-tropez].
I have the hybrid case and I love it... not too bulky, nice kick stand and white just like my note
Sent from my GT-N7000 on a liquid diet...
antonioeram said:
I have the.ringke slim. probably the slimmest around. Took a lot of droppings. Still great.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
+ 1 excellent case.
I have this one in white.
http://www.ebay.ca/itm/Samsung-Gala...t=LH_DefaultDomain_0&var=&hash=item7915e57204
It's got a great fit-n-finish to it. Provides clean access to all the ports, and has a good level of protection.
I've got the Krussell ColorCover in white (http://www.amazon.co.uk/Krusell-ColorCover-Samsung-Galaxy-89631/dp/B0072CM2MS), as I ordered a white Note, but got delivered a black one instead, so this is unused.
I know it doesnt tick all your boxes, but it is a nice case and feels very nice in the hand. You can have it for a fiver if you want. PM me if interested.
Rob
Yoobao
Check this out
you'll love it
http://www.amazon.co.uk/fashional-l...ectronics&ie=UTF8&qid=1338436195&sr=1-3-spell
Or this one:
http://www.ebay.ca/itm/110875813319...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Fast shipping too. @ least in Canada, where I live.
Right now I am very unhappy with the case and I am most likely going to be returning it to best buy.
1) The rubber cut outs seem to be a little off.
2) Getting it inside of the plastic bracket is just not happening. It just seems to tight of a fit. Any advice here?
3) I'm just frustrated with it over all. Bad design? Morse than likely for me anyways. But I am sure for others it works great. The last commuter case I had has a flat lip to so that you can work the case on. It doesn't seem to be the same for the S3. Getting the buttons in with all of the flaps looks to be more work than its worth.
Oh well maybe the Defender ill be better.
mine fits perfectly... it's supposed to be a snug fit. Just put the case in one side at a time starting with the volume rocker and then push the power button side in.
Otterbox has changed the silicone portion of the case so it is more durable but also more stiff and rigid. I was able to get my case on without too much trouble but it wasn't as easy as other cases. The thickness of the silicone also makes button presses harder. This case won't be for everyone but I like it enough.
The Dark One
Check out the recent Trident Kraken thread. There is a video comparison with Otterbox Defender, that shows how the case installs/removes, I prefer the way the Kraken works, so I ordered it for $29.95, link in the other thread. (Make sure you watch the right video, the one of the iPhone Kraken, is an old trident design, not the current set up)
firetruck41 said:
Check out the recent Trident Kraken thread. There is a video comparison with Otterbox Defender, that shows how the case installs/removes, I prefer the way the Kraken works, so I ordered it for $29.95, link in the other thread. (Make sure you watch the right video, the one of the iPhone Kraken, is an old trident design, not the current set up)
Click to expand...
Click to collapse
Can you link me the video please?!
And yes the case is not for every one. This morning I put a ZAGG shield on until the Defender comes out.
Also look at the Incipio case, it feels fantastic on the phone and the buttons are responsive to a normal button press, I have no issues turning on the phone with only one hand and I'm a fairly weak guy
mastarifla said:
Also look at the Incipio case, it feels fantastic on the phone and the buttons are responsive to a normal button press, I have no issues turning on the phone with only one hand and I'm a fairly weak guy
Click to expand...
Click to collapse
Only gripe with the Incipio case is that the rubber part is a lint magnet! Ill buy that Otterbox off you lol!
I didn't like it very much when I first got mine, but it's grown on me. It's hard to get in, but I think that's by design. The biggest issue I have with it is that the power button doesn't have very much feedback to know if I've actually pressed it. However, after a few days I've gotten used to it. I like the feel of the phone naked, but I like the protection of the case too much.
I tried just about every case locally available, and I must say this one beats them all hands down.
The only thing I don't like is the stiff rubber for the power button, but I'm sure it will soften with use.
Classy looking too.
I'm finding it a pain in the ass also. I thought my Epic Touch Trident Aegis was a pain to get on and off but this is ridiculous. Took me almost 15 minutes to get the thing on and 5 minutes to get off the first time. I understand it's probably because of the design, but still.
Also, I'm used to the clicky power button feeling of the Trident, which I don't get with the Otterbox. I might end up returning it and getting the Aegis when it pops up on Amazon in white. Or I may go with the lime green.
I looked at the commuter at best buy and thought it really ruined the appearance of the phone.Decided to go with the PT case with holster(Seido) and found it to be much nicer and offered a decent amount of protection
Sent from my SGH-T999 using xda app-developers app
It stiff I agree but maybe you guys need to get some man hands.
So funny story of the day....
After i returned my case to best Buy I check my email to find that Otterbox sent me a case anyways with an email from a manager. Apologizing to me and told me the case is on them! Very nice of them IMO. This is why I love Otterbox. Best CS hands down!
So maybe I will give the case one more go. I just hope it doesn't kill the corners of my Zagg IS. I have had it on now for 2 days! My case should be here tomorrow or Thursday. Again when they asked if I would like another I told em no that I was returning it and that I would be getting the Defender if it ever came out. I never even asked to speak to a manager. Some things just wow me. To bad other companies are not like OB.
Hi guys, I want to buy a new case and have narrowed it down to these two cases. I just need it for scratch protection and maybe minor drops. My questions are: which of these two cases fits better with the official extended battery, and which of these two cases is slimmer? Thanks
If you plan are running it with an extended battery then the diztronic for sure. The Ultra Hybrid wont fit right.
Just to make sure, I have the i9250M version which I will be running with the 2000mAh extended battery. That will not fit perfectly with the Ultra Hybrid, correct?
Someone posted pics of the case on his LTE galaxy nexus + 2100 mah battery.
http://forum.xda-developers.com/showthread.php?p=26895098
I know that you have the GSM version with the 2000mah battery. It is a little slimmer, but I suspect similar results. Perhaps not as bad, but still. It will go on the phone, but the sides will not completely cover.
BTW the ultra hybrid is on sale from the official site. I have the GSM + extended also and might buy one anyways and try to bend out that plastic part. The thing that makes the "hump" in the back.
4Pr3mier said:
BTW the ultra hybrid is on sale from the official site. I have the GSM + extended also and might buy one anyways and try to bend out that plastic part. The thing that makes the "hump" in the back.
Click to expand...
Click to collapse
The back piece feels like hard polycarbonate, you might have to heat it up to change the shape. It's going to be difficult to make it look good.
That's what I'm thinking. $13 is somewhat cheap enough to mess around with it. The website is OOS on the black one now, so I guess I won't be doing this anymore.
Diztronic is where's it at. I'm also using the 2100mAh battery, fits perfectly.
Sent from my Galaxy Nexus using Tapatalk 2
mbh87 said:
If you plan are running it with an extended battery then the diztronic for sure. The Ultra Hybrid wont fit right.
Click to expand...
Click to collapse
Nah it fits, just not as perfectly as the original battery but the case won't fall out or looks weird.
There's just a little gap on the bottom of the camera cutout and the edge near the volume and on/off buttons doesn't go up all the way.
MilkPudding said:
Nah it fits, just not as perfectly as the original battery but the case won't fall out or looks weird.
There's just a little gap on the bottom of the camera cutout and the edge near the volume and on/off buttons doesn't go up all the way.
Click to expand...
Click to collapse
Like I said, it doesn't fit right. Never said it would never fit at all
Hmm...I did not know that the GSM with EB is slimmer than the LTE with EB. I saw those pictures earlier, and the fact that the phone bulges out on the sides bothers me a lot. Does anyone know how much slimmer the GSM variants is to the LTE (both with EB)?
I have the Dizitronic case (among others) and primarily use it when I am not doing anything 'active'. Its definitely slim and looks good. Fit on it is great (GSM with standard battery). For $10, its a great purchase.
For what its worth, it is slim enough to also be used with a leather belt pouch as well.
Haven't used the SGP but it looks very nice as well.
i really wanted to keep the ultra hybrid but the really high sensitivity of the power button was a dealbreaker. just a light brush over the power button would turn the device on.
ceejay83 said:
i really wanted to keep the ultra hybrid but the really high sensitivity of the power button was a dealbreaker. just a light brush over the power button would turn the device on.
Click to expand...
Click to collapse
How long did you use it for?
ceejay83 said:
i really wanted to keep the ultra hybrid but the really high sensitivity of the power button was a dealbreaker. just a light brush over the power button would turn the device on.
Click to expand...
Click to collapse
If you're handy with small tools, it's pretty easy to adjust the stub inside the case where the button is, and make it less sensitive. A dremel tool with a tiny sanding wheel, or a dental drill when your dentist isn't looking , will do the trick. Or even some small hand tool to carve away some of it could work.
I was taking a few unintended screenshots the first week until I adjusted both the power button and the volume buttons.
SefEXE said:
How long did you use it for?
Click to expand...
Click to collapse
for a few days. in that short time i couldn't deal with it.
sanding/modifying it is too much of a hassle. rather get a refund than messing the case up