Pro 2 hardware QWERTY number keys producing Wrong symbols - Touch Pro2, Tilt 2 Windows Mobile General

Hi
Yes i have searched the forum.
Please fully read the description of my problem before advising me to do something i already stated i have tried.
I have an unlocked GSM TPII.
ROM: Simplicity WWE ROM (date 03/27/2011) ver 5.2.29017 (29017.5.3.12) according to winmob phone info
No reg tweaks or anything else to account for the behaviour. Had phone a few months now with no real issues. Haven't installed any txt/typing related software recently.
Just out of the blue the other day my hardware keyboard starts acting weird.
The main alphabet keys are fine. But the top row number keys are only producing symbols ( NO I AM NOT IN SYMBOL MODE).
The symbols are not even the correct symbols for the corresponding number keys either.
As number inputs unshifted/or func keyed i get
[email protected] 2=_ 3=! 4=( 5=) 6=' 7=" 8=; 9=: 0=/
Shifting makes no difference at all
With Func key on i get
1=% 2=¢ 3=$ 4=& 5=* 6=1 7=2 8=3 9=# 0==(yes = )
Nothing seems to change this behaviour, checked every input and txt/type setting, rebooted a few times, still the same. Figuring it must be a reg setting.
Any help hugely appreciated as this is seriously messing with my txting.
Thanks in advance
Zeb

Seems you haven't gone drastic and flashed...
So either hard reset and go back to default on the ROM you're on, or go all out crazy and flash stock.
Certainly would rule it out... Sorry I don't have more specific advice.

Hi m8
Thanks for the prompt reply, was hoping to be able to avoid a full reset.
But hoohum .....
Just got cobaltcontroller, FPseCE, etc, etc all nicely installed and setup.
Oh well....
Any recommendations on a different ROM?? GSM as am in uk, simplicity wasn't my choice prev owner flashed it.
Hopefully someone else has reg fix or something
Thanks m8
Zeb

Guru Zeb said:
Hi m8
Thanks for the prompt reply, was hoping to be able to avoid a full reset.
But hoohum .....
Just got cobaltcontroller, FPseCE, etc, etc all nicely installed and setup.
Oh well....
Any recommendations on a different ROM?? GSM as am in uk, simplicity wasn't my choice prev owner flashed it.
Hopefully someone else has reg fix or something
Thanks m8
Zeb
Click to expand...
Click to collapse
Good luck.
I've always liked EnergyROM.

Related

wm6 keyboard fix

I have a Softbank and the keys are reorganized (for example @ becomes !).
There used to be a keyboard fix here, but i can't find it anymore. Someone lead me this, please.
Try using the search button or google its amazing what you will find...
imasri29 said:
I have a Softbank and the keys are reorganized (for example @ becomes !).
There used to be a keyboard fix here, but i can't find it anymore. Someone lead me this, please.
Click to expand...
Click to collapse
Try one of two patches below, it may help you..
Keyboard Mapping Fixed
Try this:
http://forum.xda-developers.com/showpost.php?p=1179841&postcount=14
Works on my X01HT.
Make sure you turn your phone off after this registry edit using the power button, don't use the reset button, and you'll find the keyboard symbols will be mapped OK.
imasri29 said:
I have a Softbank and the keys are reorganized (for example @ becomes !).
There used to be a keyboard fix here, but i can't find it anymore. Someone lead me this, please.
Click to expand...
Click to collapse
the most easy way I think is d/l a program called HTCustom
Install it, run it, at the keyboard setting, pick "Japanese"
save then soft reset......
works fine
So I tried both of the cab files attached in post #3 and neither of them fixed my issue. Mine seems rather unique. There are about 8 symbols that are out of wack. Here's how my keyboard is mapped right now:
Hardware key: Actual Symbol it brings up:
! ~
@ !
? @
_ ;
- ?
" -
: _
; :
The above was the case before the cab installs, and with either of them installed as well. All other symbols, letters, and numbers are working fine though. Can any experts see what the issue is by looking at the above mapping problems? It's totally over my head. I'm on vp3G's version of LSVW's 3.30.2.1 Rom.
If anyone can figure this out without me having to flash another ROM, I'll buy you a beer.
EDIT: Ok, the formatting of the symbols above did not show up in the post the way I expected. The symbol on the left is the hardware key, and the symbol directly to the right of it is the actual symbol that comes up on the screen when you hit said hardware key. Thanks.
stpete111 said:
So I tried both of the cab files attached in post #3 and neither of them fixed my issue. Mine seems rather unique. There are about 8 symbols that are out of wack. Here's how my keyboard is mapped right now:
Hardware key: Actual Symbol it brings up:
! ~
@ !
? @
_ ;
- ?
" -
: _
; :
The above was the case before the cab installs, and with either of them installed as well. All other symbols, letters, and numbers are working fine though. Can any experts see what the issue is by looking at the above mapping problems? It's totally over my head. I'm on vp3G's version of LSVW's 3.30.2.1 Rom.
If anyone can figure this out without me having to flash another ROM, I'll buy you a beer.
EDIT: Ok, the formatting of the symbols above did not show up in the post the way I expected. The symbol on the left is the hardware key, and the symbol directly to the right of it is the actual symbol that comes up on the screen when you hit said hardware key. Thanks.
Click to expand...
Click to collapse
My problem is almost the same... my keys are a bit different though
Left is symbol pushed Right is symbol that appears
~ !
! @
@ ?
; _
- "
_ :
? -
+ +
: ;
Have yet to find a fix. both cabs above do not work...
jwagman1 said:
My problem is almost the same... my keys are a bit different though
Left is symbol pushed Right is symbol that appears
~ !
! @
@ ?
; _
- "
_ :
? -
+ +
: ;
Have yet to find a fix. both cabs above do not work...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=1271619#post1271619
Download this and set keyboard style as needed. i set mine to "cingular" and all my keys work now
Really? I already had this app and tried all that. It does not fix my problem.
Beer is still up for grabs...
it's just your language setting in WM6, set it to "cingular" (if you'r eon Cingular) and it'll go away.
had the same problem for a few weeks until I figured that out.
cuttriss said:
it's just your language setting in WM6, set it to "cingular" (if you'r eon Cingular) and it'll go away.
had the same problem for a few weeks until I figured that out.
Click to expand...
Click to collapse
Like I said in my post #9, I set it to Cingular, reset as prompted, and it DID NOT FIX IT. I tried Japanese too as takaki suggested above. That DID NOT WORK EITHER.
Brewski still up for grabs...
I had the same problem. I just used the HTCustom Tweak to set the keyboard to Cingular and all is fine now.
Hay guys not sure how many people are having this problem.
But this is my problem Dopod 838pro with Windows M6 Black 3.01
From a fresh rom image the symbol pad works, but i noticed as soon as i install blackberry connect, the symbol pad stops working.
So if you guys have BBConnect thats your problem
hopfully there will be a fix for this but iam willing to not deal with it at the moment
OpusBC said:
I had the same problem. I just used the HTCustom Tweak to set the keyboard to Cingular and all is fine now.
Click to expand...
Click to collapse
I'm baffled. I mean, this is the solution for EVERYONE except me. Looks like I'm going to have to go with a completely different ROM to see if that works.
stpete111 said:
I'm baffled. I mean, this is the solution for EVERYONE except me. Looks like I'm going to have to go with a completely different ROM to see if that works.
Rom: WM6.1 Nola Icerom v. 1.1
Radio: v1.54.11.00
Click to expand...
Click to collapse
Hmmm, maybe it IS your ROM. WM6.1 Nola Icerom v. 1.1? Radio: v1.54.11.00? Where did you get this configuration? I haven't been as active in the past few days, so ... Did I miss something?
-pvs
pvs said:
Hmmm, maybe it IS your ROM. WM6.1 Nola Icerom v. 1.1? Radio: v1.54.11.00? Where did you get this configuration? I haven't been as active in the past few days, so ... Did I miss something?
-pvs
Click to expand...
Click to collapse
Ha, sorry PVS, that's a joke... I did that as an inside joke to another member. I have to get rid of that. I had mentioned in my post on the first page what my real rom is: vp3G's version of LSVW's 3.30.2.1 Rom with 1.41 radio.
stpete111 said:
Ha, sorry PVS, that's a joke... I did that as an inside joke to another member. I have to get rid of that. I had mentioned in my post on the first page what my real rom is: vp3G's version of LSVW's 3.30.2.1 Rom with 1.41 radio.
Click to expand...
Click to collapse
Damn! And I thought I missed something biblical in my two days "away" ... WM8 or something, with a radio that could outpace my cable connection at home. Oh well, guess I need to wait a few more days before one of these cooks brews up something like that.
Sorry I didn't put your info together with the first post. Had a tooth extraction yesterday, and the pain-killers are making me a little slow.
Also sorry I don't have an answer for your problem. All of mine, including austinnyc's typical and predictable reply, (which is really becoming SO BORING, btw) were already offered.
Good luck with your issue,
-pvs
do you have total commander? if you do, try this
Different keyboard layouts for different Hermes versions
Issue: When applying a non-cingular ROM to an 8525 its default keyboard is different than the 8525.
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)
tbl178 said:
do you have total commander? if you do, try this
Different keyboard layouts for different Hermes versions
Issue: When applying a non-cingular ROM to an 8525 its default keyboard is different than the 8525.
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)
Click to expand...
Click to collapse
I have an HTC Tytn, not an 8525, but I tried your registry tweak anyway. No go
This has to be some sort of hardware failure.
have an 8525 flashed with schaps wm6 rtm rom, and the registry change in post #4 worked like a charm

Calendar cab

guys can someone help with a link for WM calendar?
after installing 2.1 touch i had an issue with the left soft key in an appointment saying reply instead of edit. ive reflashed original wm5 rom and then vanmilla and same problem - now the calendar itself is playing up with things missing like letters (no am/pm just a & p) it only shows 5 hours in the working day
im just wondering if another calendar will help
thanks
guys can someone please help with this
for time, there is not pm or am on call register etc etc as well, just seems a bit strange, i re-flashed, hard reset, soft reset dunno what he problem is
the stuff you said, should be able to be fixed by settings (i.e. Flashing not required). the am/pm issue, I think it is in the regional settings. And the 5 hours working one, I think can be set in.. the Calender itself.
i tried all this, no joy, as soon as i add another rom, it all changes, but still doesnt explain why it says reply in the left soft of a calendar entry???
do you have a screendump?
patterns said:
i tried all this, no joy, as soon as i add another rom, it all changes, but still doesnt explain why it says reply in the left soft of a calendar entry???
Click to expand...
Click to collapse
im not sure what that is?
Screen capture of your device
patterns said:
im not sure what that is?
Click to expand...
Click to collapse
no unfortunately, how can i do this if it helps? thanks]
ive just flashed wm5 and the calendar is fine, reflashed 2.1 touc and then the same process with vanilla and again the soft key says reply??? it didnt with wm5???
I'm not sure what you are trying to say, but from the looks of it, it is a WM6 and WM5 difference, nothing much you can do about it.
hanmin said:
I'm not sure what you are trying to say, but from the looks of it, it is a WM6 and WM5 difference, nothing much you can do about it.
Click to expand...
Click to collapse
I think he's trying to say the the right softkey in the Calendar program is set to "Reply" instead of "Menu". Basically, he can't get to the menu now. Can that be fixed with the softkey program in settings? (I haven't explored this application fully, yet) But that doesn't sound right. I don't know how you would correct the way softkeys change within programs - just the home screen.
He may want to try to turn off his firewall and download it again. Then reflash just to make sure.
patterns said:
guys can someone help with a link for WM calendar?
after installing 2.1 touch i had an issue with the left soft key in an appointment saying reply instead of edit. ive reflashed original wm5 rom and then vanmilla and same problem - now the calendar itself is playing up with things missing like letters (no am/pm just a & p) it only shows 5 hours in the working day
im just wondering if another calendar will help
thanks
Click to expand...
Click to collapse
Thats the way wm6 works
edit is in menu\edit different to wm5.
ahh ok, so its just set like that?
your both right - menu is on the right soft key and edit is in there
i just thought it may be a problem with my rom or phone as the left soft key says reply and its not clickable. its not a big deal im not that fussy and love the software - setlled with touch 2.1 in the end. only reason i was panicking s i thought it maybe a bug or somehting and ruin my phone
thanks so much guys

Dialer keypad buttons Transparent!! (regedit oops)

hello everyone,
First a big thanks to K for his beautiful roms. I am currently using K's 1.30a (december) rom, and I love it.
But, my problem....... I was playing around in the registry yesterday, and recall setting something along the lines of "transparent dialer keys" (dumb idea #1). I noticed that it didnt do anything, so I left it (dumb idea #2).
Today, I had to restart my phone, and then went to make a call and guess what. The dialer keys are transparent!! It makes it look like hte phone is freezing, but I can still use the empty spaces to dial.
Does anyone know WHERE in the registry this key is? I can definitely set it back ( I believe it was a 1 or 0 setting), but only if I can remember where it is.
If anyone can help me, I would be eternally grateful. Otherwise I will have to go about upgrading to K's next newest rom (was going to eventually anyway), and/or finding a new dialer skin to install.
Heres to hoping someone knows!
any body ?
try this, but if doesn't work, plz hard reset ASAP. and don't forget to make a back up data first (just PIM, Message not the SYSTEM, afraid the last registry will follow).
Thank you sir!
Does it matter that I'm on a Hermes and thats a Kaiser dialer?
I will try this in about an hour.. thanks again!!
ryaske said:
Thank you sir!
Does it matter that I'm on a Hermes and thats a Kaiser dialer?
I will try this in about an hour.. thanks again!!
Click to expand...
Click to collapse
it works on hermes. it's made look alike (i think).
report here if anythinh happen.
Well I installed it, and it asked me to reboot. Upon restarting, the phone skin was completely unchanged! I think I'm just going to suck it up and upgrade to one of the newer roms, again. Thanks for your help though.. I included a pic of what it looks like .. its pretty interesting.
ryaske said:
Well I installed it, and it asked me to reboot. Upon restarting, the phone skin was completely unchanged! I think I'm just going to suck it up and upgrade to one of the newer roms, again. Thanks for your help though.. I included a pic of what it looks like .. its pretty interesting.
Click to expand...
Click to collapse
Try this one
nope! same old thing. I'm pretty sure the reg value I changed is what's causing it. I will never find it though (I'm surprised there isn't a big map of what sections of the registry do what .. even for windows!)
Not a big deal thought, New rom for me. (i will be documenting everything thsi time!)
ryaske said:
nope! same old thing. I'm pretty sure the reg value I changed is what's causing it. I will never find it though (I'm surprised there isn't a big map of what sections of the registry do what .. even for windows!)
Not a big deal thought, New rom for me. (i will be documenting everything thsi time!)
Click to expand...
Click to collapse
Weird but cool . I think I need that registry if you find them to protect my billing from my lil' bro. (just kidding). Good luck to u.
Looks and works great on my HTC TYTN RU version. Thanks a lot. The only problem is the previous "green" short call list.
I've got the same problem!!!!
With a P4350 when I install any dialer (tried some of them) I've got the transparent keys.
Right now no solution to the problem

Hermes Keyboard Map

I flashed to the htc release wm 6.1 but accidentally did a foreign version. I flashed it again with the US release and it works fine except the symbols E, D, X, W, S, Z, Q, and A are not working correctly. They input a different symbol.
I went to do the keyboard fix...
"Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
There is a key called 'Layout' and it is in Decimal.
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal)."
...and the value was already 132105 (20409 in decimal)
I went ahead and changed it to 132104 and then back to 132105 but it is still not working.
Is there such a program that would allow me to easily re-map the keyboard?
Any help is appreciated!
schaps advanced config 2
Thanks!
I ended up just finding this fix a little further down the page...
"Issue: When applying a non-cingular ROM to an 8525 its default keyboard is different than the 8525.
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)"
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
scfreshy said:
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
Click to expand...
Click to collapse
FIXED sorry for clutter!
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)"
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
No it doesn't fix the problem, any other place in the registry do you know....? Thank you!!
Apologies for jumping onto this thread, seems the best place really.
I've just bought a HTC Hermes, and it has WM 6.1 installed, using it on the Orange UK network.
My only problem is, when pressing ! I get @, and when pressing Y i get Z.
I've ensured all language and keyboard options are set to UK, however I just don't seem to be able to change the keyboard map to full UK, although physically the keyboard is correct, just not the SW side of things.
I was just wondering if someone could help me, if you let me know where I need to look, i'll be able to help you, just not used anything MS based for the past 4 years, so its a bit of a foreign object now.
Thank you,
Greeee said:
Apologies for jumping onto this thread, seems the best place really.
I've just bought a HTC Hermes, and it has WM 6.1 installed, using it on the Orange UK network.
My only problem is, when pressing ! I get @, and when pressing Y i get Z.
I've ensured all language and keyboard options are set to UK, however I just don't seem to be able to change the keyboard map to full UK, although physically the keyboard is correct, just not the SW side of things.
I was just wondering if someone could help me, if you let me know where I need to look, i'll be able to help you, just not used anything MS based for the past 4 years, so its a bit of a foreign object now.
Thank you,
Click to expand...
Click to collapse
Good job and thank you in finding this thread and not opening up a new one
Anyhow, have you tried the latest Advance Config Tool v3.3? Try that version and see if it fixes you issue.
kareem9nba said:
Good job and thank you in finding this thread and not opening up a new one
Anyhow, have you tried the latest Advance Config Tool v3.3? Try that version and see if it fixes you issue.
Click to expand...
Click to collapse
Hi there,
I'm actually new to Smartphones, and the Tytn / Hermes was going cheaply online (ebay unfortunately), but the phone itself is excellent and is easy to use from back in my windows days.
Most is familiar, but seeing how far Windows can go before I want to switch to Linux.
Where would I get the ACT? Is it downloadable from here as a development tool, or is it online needing payments etc?
Thank you,
greee, u can get it at schaps website here: http://forum.xda-developers.com/showthread.php?t=317070&highlight=advanced
galaxys,
I've downloaded the ACT, along with a pocket msn, and neither will install.
Do i need to put them somewhere for it to install correctly? Just i'm only getting access to my memory card.
Thank you,
Greeee said:
galaxys,
I've downloaded the ACT, along with a pocket msn, and neither will install.
Do i need to put them somewhere for it to install correctly? Just i'm only getting access to my memory card.
Thank you,
Click to expand...
Click to collapse
Both should install on main memory.
Are you getting an error when the don't install?
So far kareem, i'm getting an XML output for the ACT, and for Pocket MSN it reports:
Setup Is Not a valid Pocket PC application.
With the ACT, i've no option to install, although the setup file I have was meant to be a cab file.
Thank you,
Scratch all that, got both PocketMSN and ACT installed today! For some reason the keyboard was in German, so switched that back!
Thanks guys!
Now got to find uber cool stuffs for my phone...
what's the value for an azerty keyboard

Word Suggestion Issue

I don't have the Touch Pro 2 yet but I am trying to help someone out to fix his issue.
Basically his problem is the suggested word feature doesn't work as well as the Original Touch Pro.
Here is his issue. If anybody could help I would greatly appreciate it.
The correct word "também" is correctly suggested if I type "tamb". So far, so good (although on Touch Pro I could type "tambem" and he would suggest "também" also). The problem is with small words like "olá", "não", "é", "há", "ás", etc...
The T9 only starts suggesting words after the third letter.
Does anyone know how to make the T9 start suggesting after the first typed letter? It would make things better, but it would not solve the problem. There are many words that are single lettered: "é", "à", "á", etc..
Click to expand...
Click to collapse
Maybe a registry setting? I don't have the TP2 so I am not able to browse the registry and find it but I figured you guys would be the best help for this issue. Thanks in advance.
Try this...
Dont know if its what you are after, but might be
http://forum.xda-developers.com/showthread.php?t=534126
hope this helps
I think most t9 starts after the third word because just by typing one letter, there are thousands of words that it can be. So when more letters are typed, it narrows down the selection in the dictionary. The only words that might show up quicker is if the TP2 actually stores newly added words into the dictionary.
dfootball56 said:
I don't have the Touch Pro 2 yet but I am trying to help someone out to fix his issue.
Basically his problem is the suggested word feature doesn't work as well as the Original Touch Pro.
Here is his issue. If anybody could help I would greatly appreciate it.
Maybe a registry setting? I don't have the TP2 so I am not able to browse the registry and find it but I figured you guys would be the best help for this issue. Thanks in advance.
Click to expand...
Click to collapse
Hi. I'm the one who wrote the quoted message
Thanks dfootball56!
Let me just add some more info: what madjsp wrote is indeed true. However, on Touch Pro, this never happened... If I typed "esta", the XT9 on Touch Pro would suggest "está", "esta", "estámos", etc... On TP2, "está" only is suggested if I type "est".
This is, if I type the full accented word (without the accent) it does not suggests the correctly accented word...
Hope I'm not being too much confusing...
Thanks for any help!
you've been clear enough! same problem here, very very annoying since in italian accented letters are very common too.. no solutions / hacks / tricks??
that would be great! thaks a lot!
Hi. I'm the one who wrote the quoted message
Thanks dfootball56!
Let me just add some more info: what madjsp wrote is indeed true. However, on Touch Pro, this never happened... If I typed "esta", the XT9 on Touch Pro would suggest "está", "esta", "estámos", etc... On TP2, "está" only is suggested if I type "est".
This is, if I type the full accented word (without the accent) it does not suggests the correctly accented word...
Hope I'm not being too much confusing...
Thanks for any help!
Click to expand...
Click to collapse
Hey man. Figured these guys on here were the best resource of new hacks and tweaks. I'm sure someone will get bored and try to figure something out...haha If I had one now I would search the registry for you but it hasn't came out in the U.S yet
Update: I mailed HTC and they understood and acknowledged my problem. Just hope it was worth the "effort"...
I'm quoting all the mails:
Me: (...) already described the problem
HTC:"Hi Nuno,
The T9 dictionary does not include words with special characters. You can add these words manually, and they will be remembered next time you need them. On the onscreen keyboards, tapping and holding on the letter assosciated with the special character will display all the extra characters for that letter, and you can drag and select them.
Best REgads"
Me: "Hi. Thanks for the fast reply. I'm afraid I disagree with you: the T9 does include words with special characters. I've never added words like "está", "também", "já", and they are there. The problem is that even if I add the word "olá" to the diccionary (not needed because it is already there), the T9 will not suggest it because the suggestions only start after the third letter. I type "ola" and it does not suggests me "olá". However, the T9 of the 'old' Touch Pro that I've got does this correctly: I type "estariamos" -the full word - and it suggests me "estaríamos". On the Touch Pro 2, I would have to type "estar" so it could suggest me "estaríamos". Are understanding what the problem is? I hope I'm not being too confuse. Thanks."
HTC:"Hi Nuno,
I understand the issue now, I do not think I can resolve this for you now, I have forwarded details to our developers for investigation and possible resolution. Please monitor our support pages for fixes and updates in teh future, and I will be back in contact once I have further news for you.
Best Regards"
I then closed the "support case". I think there's nothing much I can do...
Nuno, did you recieve any reply from their side?
great job nuno, so basically we have to wait and pray for them to fix it in a rom update or hotfix... wtf
fadimck said:
Nuno, did you recieve any reply from their side?
Click to expand...
Click to collapse
Yes, I did... you can see what they told me on my previous post.
Unfortunately we just have to wait for a hotfix...
at least they said they will do this hotfix.. it's a good start, now let's hope it doesn'take ages!
Today I found that the T9 word suggestion work's perfectly if I write the messages in portrait mode (without hard keyboard out) and with the "telephone numeric keys" selected...
This is indeed a bug somewhere on the T9 definitions...
Hi.
I worked out a solution!! ;D ;D ;D
I borrowed a Portuguese Touch Pro, copied the following files from \windows
eT9.HQD.kdb
eT9.SQR.Accented.kdb
et9.sqr.portuguese.kdb
eT9ime.dll
KbdNopAll.dll
and then placed them on the \windows folder of the Touch Pro 2
Reboot and DONE!
Good "old" XT9 with the correctly suggested words!!
I've placed the files here, in case someone needs it:
http://www.nunosilva.com.pt/nuno/outras/T9TouchPro.rar
Mind that this is for the Portuguese TP2; I don't know if there are differences from TP2 from other countries.
Thank you all for your help
Well... not that solved after all...
I found out that the Touch Pro has specific keys for these marks:
/ ? + = - _
Meaning: on the Touch Pro 2, I can't write them with the hard keyboard
I also found out that it is only necessary to replace the eT9ime.dll file; all the other are pointless as far as I figured out.
So, to put it back in it's original form, just re-replace the eT9ime.dll file.
Here is the link, in case someone forgot to backup the files before replace them with the files from the Touch Pro:
http://www.nunosilva.com.pt/nuno/outras/T9TouchPro2.rar
Because it is an .dll file I don't really know if it is editable in any way... is someone knows how to do it, please do tell me..
Thanks.

Categories

Resources