Develop Bugs

No Data Connection with Dash

I started to have an issue with my Tmobile Dash where I am having problems getting a data connection. I called TM regarding this issue and of course their standard solution as alway is "Master Reset" the phone.
I swear I have Master Reset my phone 3 x's with TM and it is a major PITA.
I have checked my settings in GPRS and TM had me change them to the following:
wap.voicestream.com
internet2.voicestream.com
internet3.voicestream.com
None seem to be working. I am getting no internet connect and I can't download my email. I have tried powering down the phone and a soft reset.
Does anyone have any solutions other than a master reset??
Thanks in advance.

What ROM are you using? how about your Proxy settings?

For the tmobile dash using the excal s261 rom
have dash tmobile
using this file to change the rom on the phone
RUU_Excalibur_HTC_WWE_Brightpoint_US_1.33.422.1_4.1.13.51_03.07.90_Ship
htc s1620 for this phone now. working 1/21/09
Setting up the handset
1. On the handset, press Start.
2. Scroll to Settings and press the center button.
3. Scroll to Connections and press the center button.
4. Scroll to GPRS and press the center button.
5. Press Menu.
6. Scroll to Add and press the center button.
7. Scroll to Description and enter T-Mo WEB.
8. Scroll to Connects to and scroll horizontally to The Internet.
9. Scroll to Access point and enter internet2.voicestream.com.
10. Scroll to User name and enter . Otherwise leave this field blank.
11. Scroll to Password and enter . Otherwise leave this field blank.
12. Press Done twice.
13. Press Menu.
14. Scroll to Advanced and press the center button.
15. Scroll to Internet connection and scroll
horizontally to T-Mo WEB.
16. Press Done.
17. Press the red End Call button.
18. Press Start.
19. Scroll to Internet Explorer and press the center button.
20. Press Menu.
you may get lost here just look for options in internet explorer and find connections next or below prioties.
21. Scroll to Options and press the center button.
22. Scroll to Connections and press the center button.
23. Scroll to Select network: and scroll horizontally to The Internet.
24. Press Done.
25. Press the red End Call button to return to the main screen.
The new Internet profile is now configured and ready for use.
Configure my HTC S621 for different Services >
Configure a different phone >
anyway good luck i just did my phone and my friends phone has the data service for usa chicago data pack 24.99

this worked perfectly thanks.

this works =D

Pats300zx said:
I started to have an issue with my Tmobile Dash where I am having problems getting a data connection. I called TM regarding this issue and of course their standard solution as alway is "Master Reset" the phone.
I swear I have Master Reset my phone 3 x's with TM and it is a major PITA.
I have checked my settings in GPRS and TM had me change them to the following:
wap.voicestream.com
internet2.voicestream.com
internet3.voicestream.com
None seem to be working. I am getting no internet connect and I can't download my email. I have tried powering down the phone and a soft reset.
Does anyone have any solutions other than a master reset??
Thanks in advance.
Click to expand...
Click to collapse
i'm having the same problem with the newest kavana rom it won't get any internet connection at all i use to work fine but 2-3 months later it stopped working..

[Q] Howto 'Boost WiMax' on SyndicateRom Frozen?

I'm running SyndicateRom Frozen with EC05
and I'm trying to pull open the extensions menu mentioned in the thread :
"[Tutorial] Reconnect to 4G much faster"
at http://forum.xda-developers.com/showthread.php?t=833332
However, when I dial ##3282# (DATA) I am taken to a "Data Programming" menu with options only to "View" or "Edit".
If I follow Edit, and enter my MSL, I see options for Data Profile, EVDO, Advanced, USB Charging, and "Others", but none for Extensions, and none of those menus contain the Extension values mentioned in the tutorial.
I do have 4G Radio on before entering the dialer code.
Am I doing something wrong? Is the dialer code different in SyndicateRom than from regular stock? Are there any other ways to get to this menu?
Thanks much!

You have 4G?!
I thought it was just a myth. Lolz
Sent from my SPH-D700 using XDA Premium App

Make sure 4G is ON
Hit ##DATA#
View
WiMAX
Enter MSL
Then go to EntryRX and change it to -110
Here is a more informative thread:
http://forum.xda-developers.com/showthread.php?t=925898

Wimax (4G) tweaks/3G Tweaks

In order to make changes such as these (There may be more or better ones listed for the Epic 4g but these ones are for the EVO 4g) follow these guides:
http://forum.xda-developers.com/showthread.php?t=733773
http://forum.xda-developers.com/showthread.php?t=726877
First you will need your MSL. You can either go through the hassle of contacting Sprint and trying to get them to give it to you, or download a terminal emulator program from the market at follow these instructions:
Once in your preferred terminal program (connecbot, terminal emulator, etc.) type the following EXACTLY:
getprop ril.MSL
It should display your MSL.
From there you can do the 4G and 3G tweaks.
Turn 4g on, go to the dialer, enter ##3282# click view then click Wimax. Enter your MSL, scroll down and choose extensions from there. This is where you will change certain settings mentioned in the threads above. To change the following edits to suggestions below, just long press the option you want to edit and click write extension.
1. Scroll down the list and click on "WiMAX_Scan_Retry(s)"
2. Enter the number 15 and click "OK" (This equals 15 seconds instead of 120 seconds, stock is )
3. Scroll down the list and click on "WiMAX_Entry_Delay(s)"
4. Enter the number 0 and click "OK" (This equals 0 seconds instead of the stock of 300 seconds)
5. WiMAX_Entry_RX(RSSI)(dBm) - Default is -89. This is the minimum signal it has to be picking up to connect. I'm not sure what the best value here is, but the lower the number, the quicker the connect, since it will connect to a weaker signal. You'll have to experiment some with this, I recommend trying about -95 to -100 first. If it's unstable, raise the value closer to -89.
6. WiMAX_Exit_CINR(dB) - Default is 2. See the entry CINR value for an explanation of it. If the signal degrades to a CINR of 2, it will drop the connection. Change this to 1. This should let you stay connected longer. If you run into problems with staying connected but having an unreliable connection, change it back to 2.
7. WiMAX_Exit_Delay(s) - The default is 2. Since it's measured in seconds, that means if the CINR drops to 2 or below for 2 seconds, it will drop the connection. Raise it to 5. That should be enough to cover just a random drop in signal that will pick back up right away. That way you don't drop connection if you drive under a bridge or something (I'm rocking mine at 15s here, but it'll take any value up to 600 seconds, which is 10 minutes!)
8. EntryCINR, change from 0006 to 0004.
Thanks to Geniusdog254 and swatspyder for finding these tweaks!
3g streaming tweaks:
dial ##3282#
Enter MSL
Click on Others
Click on Multimedia
change the following settings to:
RTSP Proxy Address changed to 0.0.0.0
RTSP Proxy Port to 0
HTTPPD Proxy Address to 0.0.0.0
HTTPPD Proxy Port to 0
Stock is:
RTSP Proxy Address: rtsp.vog.sprintpcs.com
RTSP Proxy Port: 554
HTTPPD Proxy Address: pd.vog.sprintpcs.com
HTTPPD Proxy Port: 8085
AutoPrime was considerate enought to share a way to edit MAC addresses, if you are interested in how please go here, and don't forget to thank him/donate to him as well!
If you are on a AOSP/AOKP/MIUI rom, you can try this suggestion from Sahn-J
Originally Posted by Sahn-J
Thats not true..
You just need to back-door it by usng anycut, nova activities, or apex activities to "WiMAX Hidden Menu/Extensions" on ANY phone with WiMAX.
While youre at it, make a shortcut to "wimax mode change"...
That guy with the speed tests up there told me about them.... They are ridiculous. Dm mode and SDIO are fantastic! Thanks!
Click to expand...
Click to collapse

Are there similar settings for 3G?

Journeyjeans said:
Are there similar settings for 3G?
Click to expand...
Click to collapse
Not 100% sure, but one tweak I did use on the Evo 4g that I just tweaked on this device is the:
RTSP Proxy Address changed to 0.0.0.0
RTSP Proxy Port to 0
HTTPPD Proxy Address to 0.0.0.0
HTTPPD Proxy Port to 0
Stock is:
RTSP Proxy Address: rtsp.vog.sprintpcs.com
RTSP Proxy Port: 554
HTTPPD Proxy Address: pd.vog.sprintpcs.com
HTTPPD Proxy Port: 8085
To get here dial ##3282#
Enter MSL
Click on Others
Click on Multimedia
It is suppose to help streaming and 3g. Try it, if it doesn't work go back to the stock settings above.

Im really curious if this works for 3g. No 4g in indianapolis and 3g speeds are usually 100kb.
Sent from my SPH-D710 using XDA App

Beejis said:
Not 100% sure, but one tweak I did use on the Evo 4g that I just tweaked on this device is the:
RTSP Proxy Address changed to 0.0.0.0
RTSP Proxy Port to 0
HTTPPD Proxy Address to 0.0.0.0
HTTPPD Proxy Port to 0
Stock is:
RTSP Proxy Address: rtsp.vog.sprintpcs.com
RTSP Proxy Port: 554
HTTPPD Proxy Address: pd.vog.sprintpcs.com
HTTPPD Proxy Port: 8085
To get here dial ##3282#
Enter MSL
Click on Others
Click on Multimedia
It is suppose to help streaming and 3g. Try it, if it doesn't work go back to the stock settings above.
Click to expand...
Click to collapse
I need to do this. ASAP. I just need my MSL and don't feel like dicking around with CS right now. Anyone have another way to get your MSL?

daneurysm said:
I need to do this. ASAP. I just need my MSL and don't feel like dicking around with CS right now. Anyone have another way to get your MSL?
Click to expand...
Click to collapse
I called *2 and first thing I asked was for this and she gladly gave it to me, as always it is hit and miss. If they don't do it, hang up try again. There are other ways but I think they all pretty much require root, I could be wrong though.

to the OP.. i dont have the phone yet but im wondering about the wimax settings myself.
first thing to try.. ##DATA# but instead of going to edit.. go to view. see if theres a wimax setting in there. it does NOT show up when u pick "edit". if there IS a wimax option under ##DATA# > view.. then it will most likely require your MSL.
another place to try is ##DEBUG# which will require MSL as well. there might be wimax settings somewhere in there.
one last thing i'd like you to try is to install AnyCut from the android market(free). open it and choose to add shortcut or whatever(forget the exact option) and it will give you a list of all the system apks/menus on your phone.. scroll down and see if there are any wimax options. if there are.. could you please list them? could you also make shortcuts for each wimax option you do see and run them to see if you find anything interesting.
please report back with details. you're my eyes on this for now

autoprime said:
to the OP.. i dont have the phone yet but im wondering about the wimax settings myself.
first thing to try.. ##DATA# but instead of going to edit.. go to view. see if theres a wimax setting in there. it does NOT show up when u pick "edit". if there IS a wimax option under ##DATA# > view.. then it will most likely require your MSL.
another place to try is ##DEBUG# which will require MSL as well. there might be wimax settings somewhere in there.
one last thing i'd like you to try is to install AnyCut from the android market(free). open it and choose to add shortcut or whatever(forget the exact option) and it will give you a list of all the system apks/menus on your phone.. scroll down and see if there are any wimax options. if there are.. could you please list them? could you also make shortcuts for each wimax option you do see and run them to see if you find anything interesting.
please report back with details. you're my eyes on this for now
Click to expand...
Click to collapse
You are 100% correct. The wimax settings are in " view" and not "edit". This is the same way it was for epic1, now to get my msl? Does connectbot require root?

puff601 said:
You are 100% correct. The wimax settings are in " view" and not "edit". This is the same way it was for epic1, now to get my msl? Does connectbot require root?
Click to expand...
Click to collapse
Isn't it getprop.ril MSL in terminal? Not 100% certain but I did the 4G tweak on my Epic and it made a big difference. Let me search for the thread from the Epic forum that has a full how-to..
Sent from my SPH-D710 using xda premium

JohnCorleone said:
Isn't it getprop.ril MSL in terminal? Not 100% certain but I did the 4G tweak on my Epic and it made a big difference. Let me search for the thread from the Epic forum that has a full how-to..
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I just used terminal emulator to get my MSL. It worked just fine and no root. I was thinking I needed to be rooted too, before I tried it, but it worked.
Sent from my SPH-D710 using xda premium

Double post edit.

can you explain how you got it then?
smark72 said:
I just used terminal emulator to get my MSL. It worked just fine and no root. I was thinking I needed to be rooted too, before I tried it, but it worked.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse

autoprime said:
to the OP.. i dont have the phone yet but im wondering about the wimax settings myself.
first thing to try.. ##DATA# but instead of going to edit.. go to view. see if theres a wimax setting in there. it does NOT show up when u pick "edit". if there IS a wimax option under ##DATA# > view.. then it will most likely require your MSL.
another place to try is ##DEBUG# which will require MSL as well. there might be wimax settings somewhere in there.
one last thing i'd like you to try is to install AnyCut from the android market(free). open it and choose to add shortcut or whatever(forget the exact option) and it will give you a list of all the system apks/menus on your phone.. scroll down and see if there are any wimax options. if there are.. could you please list them? could you also make shortcuts for each wimax option you do see and run them to see if you find anything interesting.
please report back with details. you're my eyes on this for now
Click to expand...
Click to collapse
Thanks, and you're right, I can only view it. I'll try the rest too.
Sent from my SPH-D710 using XDA App

smark72 said:
I just used terminal emulator to get my MSL. It worked just fine and no root. I was thinking I needed to be rooted too, before I tried it, but it worked.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
How did u get the MSL with terminal emulator?
Sent from my SPH-D710 using xda premium

autoprime said:
to the OP.. i dont have the phone yet but im wondering about the wimax settings myself.
first thing to try.. ##DATA# but instead of going to edit.. go to view. see if theres a wimax setting in there. it does NOT show up when u pick "edit". if there IS a wimax option under ##DATA# > view.. then it will most likely require your MSL.
another place to try is ##DEBUG# which will require MSL as well. there might be wimax settings somewhere in there.
one last thing i'd like you to try is to install AnyCut from the android market(free). open it and choose to add shortcut or whatever(forget the exact option) and it will give you a list of all the system apks/menus on your phone.. scroll down and see if there are any wimax options. if there are.. could you please list them? could you also make shortcuts for each wimax option you do see and run them to see if you find anything interesting.
please report back with details. you're my eyes on this for now
Click to expand...
Click to collapse
Alright, with you last paragraph I think I may have found it. Here is what was listed and here is how to do it (you have to have 4g on in order to make changes however):
WiMax CT
WiMax DM
WiMax Mode Change
WiMax_CFG
WiMax_CFG
WiMax_NETEST
WiMax_RC
WiMaxLineTest
In order to make changes such as these (There may be more or better ones listed for the Epic 4g but these ones are for the EVO 4g) follow these guides:
http://forum.xda-developers.com/showthread.php?t=733773
http://forum.xda-developers.com/showthread.php?t=726877
Download Any Cut from the market, open it and choose New Shortcut, then choose Activity. Scroll down to WiMax_CFG (the first one, there after two listed) and it will create a shortcut on your home screen. Open that and select Extensions and make the changes from the threads above in that menu (just long press what you want to change and click save, it will automatically change it). You might have to reboot your phone in order for them to actually take but I'm still not sure if this all works.

It also looks as though you may be able to adjust frequencies. I'm tempted to test them. In wimax_cfg the first one under MRU you'll see 4 sts of frequencies and you can edit then it seems.
Sent from my SPH-D710 using XDA App

Honestly, I haven't changed a thing yet..notice my 4G in the 2nd screenie. I don't know if changing latency to change 4G on time will use more battery or not
Sent from my SPH-D710 using xda premium

JohnCorleone said:
Honestly, I haven't changed a thing yet..notice my 4G in the 2nd screenie. I don't know if changing latency to change 4G on time will use more battery or not
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I think it probably will, but not certain.
Sent from my SPH-D710 using XDA App

A different route I found is to turn 4g on, go to the dialer, enter ##3282# click view them click Wimax. Enter your MSL and choose extensions from there.
Sent from my SPH-D710 using XDA App

To get your MSL code, download terminal emulator from the market and typs:
getprop ril.MSL
The output will be your MSL number.

(Q) Sprint MSL unlocks DATA but not DEBUG

Used the method posted here to get my MSL. It worked great to open the ##DATA# menu to remove the sprint proxy. However, when I use it to unlock ##DEBUG# I get the invalid code errors. Sprint game me an alternative MSL which didn't work. I have terminal emulator and the sprint msl .zip.
Any thoughts?

Sprint's unlock code is
777468
Sent from my SPH-L710 using Tapatalk 2

you dont need the lock code
You can access the debug menu without the lock code by using anycut from the market. Add a shortcut to IOTHiddenMenu(screenshot below). Gives you access to all that fun **** w/o the dialer codes or lock codes.
Link to anycut: http://db.tt/lfo4OSGy

brickeds3 said:
Used the method posted here to get my MSL. It worked great to open the ##DATA# menu to remove the sprint proxy. However, when I use it to unlock ##DEBUG# I get the invalid code errors. Sprint game me an alternative MSL which didn't work. I have terminal emulator and the sprint msl .zip.
Any thoughts?
Click to expand...
Click to collapse
I searched and did a post asking for this method and no response and i could not find it, do you have the link?

mvaughn12 said:
I searched and did a post asking for this method and no response and i could not find it, do you have the link?
Click to expand...
Click to collapse
What are you having trouble with, getting the MSL?

billard412 said:
What are you having trouble with, getting the MSL?
Click to expand...
Click to collapse
yes , i have tried the flash also and it doesnt work

mvaughn12 said:
yes , i have tried the flash also and it doesnt work
Click to expand...
Click to collapse
You don't need to flash. Go here and follow easiest method by billard412, can't fail.
http://forum.xda-developers.com/showthread.php?t=1745888

I just posted the sprint lock code for the debug menu. It is the same for all sprint s3's. It is not the MSL. It is the one I posted above.
Sent from my SPH-L710 using Tapatalk 2

slickdaddy96 said:
I just posted the sprint lock code for the debug menu. It is the same for all sprint s3's. It is not the MSL. It is the one I posted above.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I think he wants the MSL tho. And u don't need the debug code you posted if you use the anycut method I posted above

slickdaddy96 said:
Sprint's unlock code is
777468
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
i tried the anycut and when i check for msl it ask for code so the 777468 is that ##77468#

[/COLOR]
mvaughn12 said:
i tried the anycut and when i check for msl it ask for code so the 777468 is that ##77468#
Click to expand...
Click to collapse
The 777468 is the code needed in the debug(##33286#) menu. The msl is the one for the data (##3282#) menu

ok i got it to work to use Get My MSL you have to update you busybox, but default just a regular root seems to install busynbox 1.20.1 you have to upgrade to 1.20.2 and the get my msl will work. just tried it and got my msl coded you can download the latest busy box from the market.
---------- Post added at 02:05 AM ---------- Previous post was at 01:40 AM ----------
works like a charm had to speed of my 3g since no LTE coming to colorado for who knows when. if you try it allthe portsettings are under multimedia
then you can put in the following
1. Get your MSL, by calling Sprint or by using CDMA workshop like i explain below
2. After you have your MSL go to your phone and type ##3282#
3. Click Edit Mode
4. Click Advanced
5. Scroll down to RTSP/HTTP Setting
6. Change RTSP proxy IP to 0.0.0.0 or You can leave this blank if you like
7. Change RTSP proxy Port to 0 (Zero)
8. HTTP proxy IP to 0.0.0.0 or You could leave this blank if you like
9. HTTP proxy port to 0 (Zero)
10.Go enjoy Downloads and a .20-.60 mbps increase in 3G speeds!
NOTE for Samsung Galaxy S3 the Default under multimedia
rtsp proxy ip: rtsp.vog.sprintpcs.com
rtsp proxy port: 554
http proxy ip: pd.vog.sprintpcs.com
http proxy port: 8085
lte

You are better than sprint!
Sprint kept telling me that the unlock code was the same as the MSL. Thanks everyone! I still can't get my data much above 20k (often lower than that). last night until this morning it was over 1MBs, but no more. The data is HORRIFIC. I wish I knew how slow slow really was (slower than dialup!).

No, the unlock code is the code for the ##DEBUG# menu. The MSL is the master subscriber lock that is used under the ##DATA#. Take a look at this thread to see how to get the MSL: http://forum.xda-developers.com/showthread.php?t=1745888&page=3.

By chance did you take the OTA update since you were getting 1.0Mbps? Look at your baseband and see if your last 3 say LG2. If they do it might be the OTA that killed your speeds. Search about it and you will find the way to revert if you are having issues.
Sent from my SPH-L710 using Tapatalk 2

mvaughn12 said:
i tried the anycut and when i check for msl it ask for code so the 777468 is that ##77468#
Click to expand...
Click to collapse
Thanks for the input. I did update the baseband, but the speeds were slow. Sprint officially said that the network is seeing "a lot of traffic" in my area. The good news is that in 2 weeks they'll do a data upgrate to the local tower (I've heard that before). And in 7 months we get a T1 line! (Only will help marginally, if at all).
I think I'm going to start working to get out without paying ETF. I'm trying to find the contract's arbitration provision to go that route if needed.
If anyone else is in doubt, DON'T GET THE SPRINT GALAXY S3, THE DATA IS SLOWER THAN DIALUP!!!! (I get 8-20k down 123k up most of the time, even on the weekends).

That is a matter of opinion though. I live in the Atlanta area and my S3 is giving me 30 down on LTE and on 3g I get 1.5 down.
Sent from my SPH-L710 using Tapatalk 2

slickdaddy96 said:
Sprint's unlock code is
777468
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
This worked!

mvaughn12 said:
ok i got it to work to use Get My MSL you have to update you busybox, but default just a regular root seems to install busynbox 1.20.1 you have to upgrade to 1.20.2 and the get my msl will work. just tried it and got my msl coded you can download the latest busy box from the market.
---------- Post added at 02:05 AM ---------- Previous post was at 01:40 AM ----------
works like a charm had to speed of my 3g since no LTE coming to colorado for who knows when. if you try it allthe portsettings are under multimedia
then you can put in the following
1. Get your MSL, by calling Sprint or by using CDMA workshop like i explain below
2. After you have your MSL go to your phone and type ##3282#
3. Click Edit Mode
4. Click Advanced
5. Scroll down to RTSP/HTTP Setting
6. Change RTSP proxy IP to 0.0.0.0 or You can leave this blank if you like
7. Change RTSP proxy Port to 0 (Zero)
8. HTTP proxy IP to 0.0.0.0 or You could leave this blank if you like
9. HTTP proxy port to 0 (Zero)
10.Go enjoy Downloads and a .20-.60 mbps increase in 3G speeds!
NOTE for Samsung Galaxy S3 the Default under multimedia
rtsp proxy ip: rtsp.vog.sprintpcs.com
rtsp proxy port: 554
http proxy ip: pd.vog.sprintpcs.com
http proxy port: 8085
lte
Click to expand...
Click to collapse
thanks for this info. I can tell a difference in signal. Is there anything I can do in the debug menu to help as well?

billard412 said:
You can access the debug menu without the lock code by using anycut from the market. Add a shortcut to IOTHiddenMenu(screenshot below). Gives you access to all that fun **** w/o the dialer codes or lock codes.
Link to anycut: http://db.tt/lfo4OSGy
Click to expand...
Click to collapse
Dang, that's cool, unfortunately there is no 'activity' for that menu on the Galaxy Nexus (Sprint). Can't find one for Debug, or 1x Engineering.

[Q] HTC Evo Design 4G - Change WiMAX authentication to use TTLS.

Good Morning.
(Really) Hoping I can get some help here and this doesn't wind up another dead-end thread that people look at once and pass on...
I am attempting to attach this phone to a lab setup using my own WiMAX base station.. The rub is my Radius is configured to do TTLS authentication. The default WiMAX setting in the phone is TLS and it does not appear to be edit-able even after entering the MSL.
Is there a hidden menu where I can change the device to allow TTLS vs. TLS.. Or alternatively, where can I overwrite the default x.509 cert with my own x.509 client cert so I can perform TLS authentication against my own AAA?
My other option is using the Motorola Photon Q, but again I'm running into the same issue on that phone, Locked to TLS with no option to edit...
Thanks,
-Adam

overturfa said:
Good Morning.
(Really) Hoping I can get some help here and this doesn't wind up another dead-end thread that people look at once and pass on...
I am attempting to attach this phone to a lab setup using my own WiMAX base station.. The rub is my Radius is configured to do TTLS authentication. The default WiMAX setting in the phone is TLS and it does not appear to be edit-able even after entering the MSL.
Is there a hidden menu where I can change the device to allow TTLS vs. TLS.. Or alternatively, where can I overwrite the default x.509 cert with my own x.509 client cert so I can perform TLS authentication against my own AAA?
My other option is using the Motorola Photon Q, but again I'm running into the same issue on that phone, Locked to TLS with no option to edit...
Thanks,
-Adam
Click to expand...
Click to collapse
Anyone? Anyone at all?

To get to the Menu you want go to the Dial pad, and type ##3282# . It will ask you EDIT, or View. You want EDIT. It will then prompt you for your MSL. It's a six digit Password. Enter the Password. Then choose WIMAX. The settings to Enable, or Disable TTLS / TLS are there. If you do not have your MSL, you can download MSL Reader from the Play Store.