In order to make changes such as these (There may be more or better ones listed for the Epic 4g but these ones are for the EVO 4g) follow these guides:
http://forum.xda-developers.com/showthread.php?t=733773
http://forum.xda-developers.com/showthread.php?t=726877
First you will need your MSL. You can either go through the hassle of contacting Sprint and trying to get them to give it to you, or download a terminal emulator program from the market at follow these instructions:
Once in your preferred terminal program (connecbot, terminal emulator, etc.) type the following EXACTLY:
getprop ril.MSL
It should display your MSL.
From there you can do the 4G and 3G tweaks.
Turn 4g on, go to the dialer, enter ##3282# click view then click Wimax. Enter your MSL, scroll down and choose extensions from there. This is where you will change certain settings mentioned in the threads above. To change the following edits to suggestions below, just long press the option you want to edit and click write extension.
1. Scroll down the list and click on "WiMAX_Scan_Retry(s)"
2. Enter the number 15 and click "OK" (This equals 15 seconds instead of 120 seconds, stock is )
3. Scroll down the list and click on "WiMAX_Entry_Delay(s)"
4. Enter the number 0 and click "OK" (This equals 0 seconds instead of the stock of 300 seconds)
5. WiMAX_Entry_RX(RSSI)(dBm) - Default is -89. This is the minimum signal it has to be picking up to connect. I'm not sure what the best value here is, but the lower the number, the quicker the connect, since it will connect to a weaker signal. You'll have to experiment some with this, I recommend trying about -95 to -100 first. If it's unstable, raise the value closer to -89.
6. WiMAX_Exit_CINR(dB) - Default is 2. See the entry CINR value for an explanation of it. If the signal degrades to a CINR of 2, it will drop the connection. Change this to 1. This should let you stay connected longer. If you run into problems with staying connected but having an unreliable connection, change it back to 2.
7. WiMAX_Exit_Delay(s) - The default is 2. Since it's measured in seconds, that means if the CINR drops to 2 or below for 2 seconds, it will drop the connection. Raise it to 5. That should be enough to cover just a random drop in signal that will pick back up right away. That way you don't drop connection if you drive under a bridge or something (I'm rocking mine at 15s here, but it'll take any value up to 600 seconds, which is 10 minutes!)
8. EntryCINR, change from 0006 to 0004.
Thanks to Geniusdog254 and swatspyder for finding these tweaks!
3g streaming tweaks:
dial ##3282#
Enter MSL
Click on Others
Click on Multimedia
change the following settings to:
RTSP Proxy Address changed to 0.0.0.0
RTSP Proxy Port to 0
HTTPPD Proxy Address to 0.0.0.0
HTTPPD Proxy Port to 0
Stock is:
RTSP Proxy Address: rtsp.vog.sprintpcs.com
RTSP Proxy Port: 554
HTTPPD Proxy Address: pd.vog.sprintpcs.com
HTTPPD Proxy Port: 8085
AutoPrime was considerate enought to share a way to edit MAC addresses, if you are interested in how please go here, and don't forget to thank him/donate to him as well!
If you are on a AOSP/AOKP/MIUI rom, you can try this suggestion from Sahn-J
Originally Posted by Sahn-J
Thats not true..
You just need to back-door it by usng anycut, nova activities, or apex activities to "WiMAX Hidden Menu/Extensions" on ANY phone with WiMAX.
While youre at it, make a shortcut to "wimax mode change"...
That guy with the speed tests up there told me about them.... They are ridiculous. Dm mode and SDIO are fantastic! Thanks!
Click to expand...
Click to collapse
Are there similar settings for 3G?
Journeyjeans said:
Are there similar settings for 3G?
Click to expand...
Click to collapse
Not 100% sure, but one tweak I did use on the Evo 4g that I just tweaked on this device is the:
RTSP Proxy Address changed to 0.0.0.0
RTSP Proxy Port to 0
HTTPPD Proxy Address to 0.0.0.0
HTTPPD Proxy Port to 0
Stock is:
RTSP Proxy Address: rtsp.vog.sprintpcs.com
RTSP Proxy Port: 554
HTTPPD Proxy Address: pd.vog.sprintpcs.com
HTTPPD Proxy Port: 8085
To get here dial ##3282#
Enter MSL
Click on Others
Click on Multimedia
It is suppose to help streaming and 3g. Try it, if it doesn't work go back to the stock settings above.
Im really curious if this works for 3g. No 4g in indianapolis and 3g speeds are usually 100kb.
Sent from my SPH-D710 using XDA App
Beejis said:
Not 100% sure, but one tweak I did use on the Evo 4g that I just tweaked on this device is the:
RTSP Proxy Address changed to 0.0.0.0
RTSP Proxy Port to 0
HTTPPD Proxy Address to 0.0.0.0
HTTPPD Proxy Port to 0
Stock is:
RTSP Proxy Address: rtsp.vog.sprintpcs.com
RTSP Proxy Port: 554
HTTPPD Proxy Address: pd.vog.sprintpcs.com
HTTPPD Proxy Port: 8085
To get here dial ##3282#
Enter MSL
Click on Others
Click on Multimedia
It is suppose to help streaming and 3g. Try it, if it doesn't work go back to the stock settings above.
Click to expand...
Click to collapse
I need to do this. ASAP. I just need my MSL and don't feel like dicking around with CS right now. Anyone have another way to get your MSL?
daneurysm said:
I need to do this. ASAP. I just need my MSL and don't feel like dicking around with CS right now. Anyone have another way to get your MSL?
Click to expand...
Click to collapse
I called *2 and first thing I asked was for this and she gladly gave it to me, as always it is hit and miss. If they don't do it, hang up try again. There are other ways but I think they all pretty much require root, I could be wrong though.
to the OP.. i dont have the phone yet but im wondering about the wimax settings myself.
first thing to try.. ##DATA# but instead of going to edit.. go to view. see if theres a wimax setting in there. it does NOT show up when u pick "edit". if there IS a wimax option under ##DATA# > view.. then it will most likely require your MSL.
another place to try is ##DEBUG# which will require MSL as well. there might be wimax settings somewhere in there.
one last thing i'd like you to try is to install AnyCut from the android market(free). open it and choose to add shortcut or whatever(forget the exact option) and it will give you a list of all the system apks/menus on your phone.. scroll down and see if there are any wimax options. if there are.. could you please list them? could you also make shortcuts for each wimax option you do see and run them to see if you find anything interesting.
please report back with details. you're my eyes on this for now
autoprime said:
to the OP.. i dont have the phone yet but im wondering about the wimax settings myself.
first thing to try.. ##DATA# but instead of going to edit.. go to view. see if theres a wimax setting in there. it does NOT show up when u pick "edit". if there IS a wimax option under ##DATA# > view.. then it will most likely require your MSL.
another place to try is ##DEBUG# which will require MSL as well. there might be wimax settings somewhere in there.
one last thing i'd like you to try is to install AnyCut from the android market(free). open it and choose to add shortcut or whatever(forget the exact option) and it will give you a list of all the system apks/menus on your phone.. scroll down and see if there are any wimax options. if there are.. could you please list them? could you also make shortcuts for each wimax option you do see and run them to see if you find anything interesting.
please report back with details. you're my eyes on this for now
Click to expand...
Click to collapse
You are 100% correct. The wimax settings are in " view" and not "edit". This is the same way it was for epic1, now to get my msl? Does connectbot require root?
puff601 said:
You are 100% correct. The wimax settings are in " view" and not "edit". This is the same way it was for epic1, now to get my msl? Does connectbot require root?
Click to expand...
Click to collapse
Isn't it getprop.ril MSL in terminal? Not 100% certain but I did the 4G tweak on my Epic and it made a big difference. Let me search for the thread from the Epic forum that has a full how-to..
Sent from my SPH-D710 using xda premium
JohnCorleone said:
Isn't it getprop.ril MSL in terminal? Not 100% certain but I did the 4G tweak on my Epic and it made a big difference. Let me search for the thread from the Epic forum that has a full how-to..
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I just used terminal emulator to get my MSL. It worked just fine and no root. I was thinking I needed to be rooted too, before I tried it, but it worked.
Sent from my SPH-D710 using xda premium
Double post edit.
can you explain how you got it then?
smark72 said:
I just used terminal emulator to get my MSL. It worked just fine and no root. I was thinking I needed to be rooted too, before I tried it, but it worked.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
autoprime said:
to the OP.. i dont have the phone yet but im wondering about the wimax settings myself.
first thing to try.. ##DATA# but instead of going to edit.. go to view. see if theres a wimax setting in there. it does NOT show up when u pick "edit". if there IS a wimax option under ##DATA# > view.. then it will most likely require your MSL.
another place to try is ##DEBUG# which will require MSL as well. there might be wimax settings somewhere in there.
one last thing i'd like you to try is to install AnyCut from the android market(free). open it and choose to add shortcut or whatever(forget the exact option) and it will give you a list of all the system apks/menus on your phone.. scroll down and see if there are any wimax options. if there are.. could you please list them? could you also make shortcuts for each wimax option you do see and run them to see if you find anything interesting.
please report back with details. you're my eyes on this for now
Click to expand...
Click to collapse
Thanks, and you're right, I can only view it. I'll try the rest too.
Sent from my SPH-D710 using XDA App
smark72 said:
I just used terminal emulator to get my MSL. It worked just fine and no root. I was thinking I needed to be rooted too, before I tried it, but it worked.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
How did u get the MSL with terminal emulator?
Sent from my SPH-D710 using xda premium
autoprime said:
to the OP.. i dont have the phone yet but im wondering about the wimax settings myself.
first thing to try.. ##DATA# but instead of going to edit.. go to view. see if theres a wimax setting in there. it does NOT show up when u pick "edit". if there IS a wimax option under ##DATA# > view.. then it will most likely require your MSL.
another place to try is ##DEBUG# which will require MSL as well. there might be wimax settings somewhere in there.
one last thing i'd like you to try is to install AnyCut from the android market(free). open it and choose to add shortcut or whatever(forget the exact option) and it will give you a list of all the system apks/menus on your phone.. scroll down and see if there are any wimax options. if there are.. could you please list them? could you also make shortcuts for each wimax option you do see and run them to see if you find anything interesting.
please report back with details. you're my eyes on this for now
Click to expand...
Click to collapse
Alright, with you last paragraph I think I may have found it. Here is what was listed and here is how to do it (you have to have 4g on in order to make changes however):
WiMax CT
WiMax DM
WiMax Mode Change
WiMax_CFG
WiMax_CFG
WiMax_NETEST
WiMax_RC
WiMaxLineTest
In order to make changes such as these (There may be more or better ones listed for the Epic 4g but these ones are for the EVO 4g) follow these guides:
http://forum.xda-developers.com/showthread.php?t=733773
http://forum.xda-developers.com/showthread.php?t=726877
Download Any Cut from the market, open it and choose New Shortcut, then choose Activity. Scroll down to WiMax_CFG (the first one, there after two listed) and it will create a shortcut on your home screen. Open that and select Extensions and make the changes from the threads above in that menu (just long press what you want to change and click save, it will automatically change it). You might have to reboot your phone in order for them to actually take but I'm still not sure if this all works.
It also looks as though you may be able to adjust frequencies. I'm tempted to test them. In wimax_cfg the first one under MRU you'll see 4 sts of frequencies and you can edit then it seems.
Sent from my SPH-D710 using XDA App
Honestly, I haven't changed a thing yet..notice my 4G in the 2nd screenie. I don't know if changing latency to change 4G on time will use more battery or not
Sent from my SPH-D710 using xda premium
JohnCorleone said:
Honestly, I haven't changed a thing yet..notice my 4G in the 2nd screenie. I don't know if changing latency to change 4G on time will use more battery or not
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I think it probably will, but not certain.
Sent from my SPH-D710 using XDA App
A different route I found is to turn 4g on, go to the dialer, enter ##3282# click view them click Wimax. Enter your MSL and choose extensions from there.
Sent from my SPH-D710 using XDA App
To get your MSL code, download terminal emulator from the market and typs:
getprop ril.MSL
The output will be your MSL number.
Related
To start, I AM searching and trying to find any and all information that could possibly help me out.
I rooted using unrevoked. Used Calk's rom, switched to netarchy-toastmod-4.3.1-cfs-havs-nosbc-universal-signed, made several nandroid backups (one including the RSA keys, although the backup made when using unrevoked made one of the RSA keys also), tried Ava-Froyo, went back to Calk's. Also tried the PRL hack.
Im new to all this but am fairly technically inclined and understand, so I think, these processes. Of course Im still learning obviously...
....cause somewhere along the line I lost the ability to get incoming calls !!!!!!!
I can still make calls (my number comes up on caller ID correct), send texts, use the net, email, and use wifi tether.
When i make a call it triggers something cause all my texts, mail, and voicemails come streaming in all at once.??????
Im at my wits end, and probably will be up all night trying to fix it.
I found some values in my advanced settings after dialing ##3282# that were different and wonder if thats the problem.
if someone will post me their info from the ##3282# screens (off course omit your phone number under advanced) that would be awesome !!!
S is still showing off.
I have gone back to:
RUU_SuperSonic_S_Sprint_WWE_3.26.651.6_Radio_2.15.00.07.28_NV_1.40_release_140444_signed
and then:
RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459
and then the over the air update to 2.2
still not working....
I really dont want to go to the friggin Sprint store....
And any other advice where to steer my searching and efforts would be greatly appreciated !!!!!
Did you mess with your evdo settings from the settings: networks: mobile networks settings screen?
do ##3282#, under evdo, does it say automatic, or something else?
evdo settings
I will list what my phone is set at.
just answer/values
DATA PROFILE:
1
(name)@sprintpcs.com
4D2
4D2
enable
0.0.0.0
255.255.255.255
68.28.89.76
******
******
https://dsa.spcsdns.net:443/dsa/
EVDO:
disable
HDR only
ADVANCED:
(##############)
IS-2000(6)
58
enable
2
310
00
(ph# (not mine though))
9
enable
disable
evrc
voice 13k
<not available> -- LBS PDE IP
<not available> -- LBS PDE PORT
enable
enable
enable
disable
(####)/(#####)
http:/mms.sprintpcs.com
554
rtsp.vog.sprintpcs.com
8085
pd.vog.sprintpcs.com
WIMAX:
10
30
##E#D####A##@sprintpcs.com
(name)@sprintpcs.com
sprintpcs.com
2647000,2657000,2667000
10,10,10
000002
000004
1
120
10
-89
4
300
2
2
0
0
enable
disable
USB CHARGING unchecked
Flash evio 2 1.80 back on
Go into the network settings and select AUTOMATIC for the evdo mode.
EVDO:
disable
HDR only
Click to expand...
Click to collapse
HDR is what's preventing you from receiving calls. After you make the above change, go back into ##3282# and confirm that evdo is set to "automatic"
These network settings carry over regardless of rom's. You can flash til you're blue in the face, problem won't go away
Edit:
8085
pd.vog.sprintpcs.com
Click to expand...
Click to collapse
You may want to delete that so your streaming works without hiccups.
It needs to be set to auto or hybrid.
Sent from my (insert daily ROM name here) Evo 4g
ok, getting incoming calls now.
i switched to automatic under evdo and also in the advanced settings changed the phone number to my actual phone number and this time hit menu>commit changes.
yeah, now to check everything else!!!!
didnt know about the commit changes thing, i was wondering why nothing changed when i edited them.
also under settings>system updates i updated PRL and PROFILE after this.
crossing fingers!!!!
Thank God for nan back ups, now i can reroot and be back in business in no time !!!!!
BACK TO LOVING THE EVO LOL
Thanks for chiming in !!!!!!!
Glad it worked.
This post defines it a bit more - http://forum.xda-developers.com/showpost.php?p=11426299&postcount=8879
Operation Mode = ##3282# > EVDO
Hybrid = Automatic
EVDO-Only = HDR
1X-Only = CDMA
Click to expand...
Click to collapse
???????
ok, now im stumped!
something keeps changing my friggin phone number in my advanced settings in ##3282#
i can change it, commit the change, update profile and everything will be fine and work (get calls).
but then when i reboot it will switch back !!!!
i havent installed, to my knowledge, any rogue crap.
what in the blazes could be causing this???
Are you changing it in ##3282#, or in the network settings that evio 2 1.80 gives access to?
Try changing in network settings, not in ##3282#.
Also, if you want, there is an option in ##3282# to completely wipe the settings. I can't remember which heading it's under, but you need to hit menu and it'll say something like reset settings, or reset something.
I had a simular issue. Unroot the phone flash the ruu then OTA then call sprint tech suppeort and ask them hard resset your phone. It helped me. should help you to. here is how 2 unroot
http://forum.xda-developers.com/showthread.php?t=780141&highlight=unroot
Seems like an awful lot of work to fix this.. I'd exhaust other possibilities before going through all this trouble.
My phone is done. My phone wouldn't call or text earlier so i did a reset on the ##768# screen or whatever so it would run hands free activation again. It failed out. Erased all of my data from the epst screen. Can anyone help? Phone will not connect to data
abdabbs said:
ok, now im stumped!
something keeps changing my friggin phone number in my advanced settings in ##3282#
i can change it, commit the change, update profile and everything will be fine and work (get calls).
but then when i reboot it will switch back !!!!
i havent installed, to my knowledge, any rogue crap.
what in the blazes could be causing this???
Click to expand...
Click to collapse
Did you happen to have your number ported over from another carrier when you got your Evo?
Yes, it was ported. But the number listed in there wasnt the old number. Anyway my phone has been working now, with that old number in it...so...
The only thing is that when on data network it show 'EvDo' all the time, never '3G'. Is this a problem? I have been tring to read up on it and it seems fine, but everyone else's Evo's here seem to show 3G.
Im still trying to locate the original settings so I can compare exactly what I see when I do the ##3282#.
Thanks again for you help!
I'm having an issue where I can't stream videos on 4G....I can browse anything no probem, but no video. (Have plenty on bandwidth) It acts like it's loading but never plays back. 3G works just fine, any suggestions on what I be possibly missing? Thanks in advance
Sent from my SPH-D710 using xda premium
there is a known issue out right now with that, i put in a work order ticket for this ( i work for sprint ) and we're in contact with the youtube developer about this issue. happening on all the sprint dual core phones oddly enough (stock)
exceedinglimits said:
there is a known issue out right now with that, i put in a work order ticket for this ( i work for sprint ) and we're in contact with the youtube developer about this issue. happening on all the sprint dual core phones oddly enough (stock)
Click to expand...
Click to collapse
Hey thanks! I am currently running stock as a matter of fact. I know it used to work a while back etc.. Is it affecting only youtube?
There's a solution I found, I had the same exact problem about a month ago. I called Sprint about it but the person wasn't really helpful and told me that the network was just having some issues...
(You'll need your MSL btw)
##3282#
/edit
*Msl*
/others
/multimedia
Just change:
HTTPPD Proxy address to 0.0.0.0
HTTPPD Proxy port to 0
s049031 said:
There's a solution I found, I had the same exact problem about a month ago. I called Sprint about it but the person wasn't really helpful and told me that the network was just having some issues...
(You'll need your MSL btw)
##3282#
/edit
*Msl*
/others
/multimedia
Just change:
HTTPPD Proxy address to 0.0.0.0
HTTPPD Proxy port to 0
Click to expand...
Click to collapse
I'll give that a shot, thanks!
Sent from my SPH-D710 using xda premium
s049031 said:
There's a solution I found, I had the same exact problem about a month ago. I called Sprint about it but the person wasn't really helpful and told me that the network was just having some issues...
(You'll need your MSL btw)
##3282#
/edit
*Msl*
/others
/multimedia
Just change:
HTTPPD Proxy address to 0.0.0.0
HTTPPD Proxy port to 0
Click to expand...
Click to collapse
Sent from my SPH-D710 using XDA
I've reprogrammed about 12 total devices and they were all experiencing the same issue, including mine. What's funny about it is that even searching for the videos works while on 4g, just streaming it doesn't work. All other streaming apps work fine.
I've done data restores on all those devies and also factory resets, still not working. Every device has same prl same YouTube same firmware
I'm not sure, but I tried checking logs to see what was wrong...i don't exactly remember what the code was...the same problem happened when trying to watch YouTube through the browser as well...I'm just glad I found a temporary fix...
Sent from my SPH-D710 using XDA App
Youtube seems to be working fine on 4g connection for me. Completely stock. Unless it somehow switches to 3g when it starts streaming. I highly doubt it, considering I usually turn 4g on before watching videos because 3g is just too slow.
s049031 said:
There's a solution I found, I had the same exact problem about a month ago. I called Sprint about it but the person wasn't really helpful and told me that the network was just having some issues...
(You'll need your MSL btw)
##3282#
/edit
*Msl*
/others
/multimedia
Just change:
HTTPPD Proxy address to 0.0.0.0
HTTPPD Proxy port to 0
Click to expand...
Click to collapse
it works for me...
before I couldn't open any youtube video from youtube apps... what funny is I could stream youtube easily using browser...
fix worked for me
Worked for me on Evo3D. Thanks
Harris
Denver, CO
s049031 said:
There's a solution I found, I had the same exact problem about a month ago. I called Sprint about it but the person wasn't really helpful and told me that the network was just having some issues...
(You'll need your MSL btw)
##3282#
/edit
*Msl*
/others
/multimedia
Just change:
HTTPPD Proxy address to 0.0.0.0
HTTPPD Proxy port to 0
Click to expand...
Click to collapse
This worked perfectly for me, thank you so much. Had been frustrating me for months
I am curious I f I can use this method:
tropicalbrit said:
Let's get you some good data speeds. First, go to Settings - System Updates - and update PRL.Once that finishes, reboot.
Go to Market and get MSL Reader. Open the app. If it asks for "Superuser Privileges" then accept. It will tell you a 6-digit code. This code is unique to your phone. Write it down, but you can always get it again.
Go to Phone (Dial ##3282#, Choose edit mode) and enter your MSL code
select Data Profile
Hit the menu button and choose restore.
Just sit there, your phone should reboot. If it doesn't, then hold the power button and reboot.
Your phone should do "Hands-Free Provision". Once it says your phone has been provisioned, hit "Okay".
Once it starts to check for PRL update, hit cancel.
Go to Phone (Dial ##3282#, Choose edit mode) and enter your MSL code. Select Advanced, scroll down to RTSP Proxy Port and HTTP PD Proxy Port. Click on them, set them to 0 (zero).
Set RTSP Proxy Address and HTTP PD Proxy Address to 0.0.0.0
You should now have about as good 3G speeds as you can have on Sprint.
Click to expand...
Click to collapse
to increase 3G Speeds on my boost phone without interfering with my boost flash.
Thanks for the help!
Idk if that'll help or not but if it doesn't, you could try the 3g turbo charger. It's a script that you can run using script manager from the market.
Sent from my Supercharged MikG'd up EVO 4g while eatin some Chop Suey.
Hit that thanks button if I managed to help.
Used the method posted here to get my MSL. It worked great to open the ##DATA# menu to remove the sprint proxy. However, when I use it to unlock ##DEBUG# I get the invalid code errors. Sprint game me an alternative MSL which didn't work. I have terminal emulator and the sprint msl .zip.
Any thoughts?
Sprint's unlock code is
777468
Sent from my SPH-L710 using Tapatalk 2
you dont need the lock code
You can access the debug menu without the lock code by using anycut from the market. Add a shortcut to IOTHiddenMenu(screenshot below). Gives you access to all that fun **** w/o the dialer codes or lock codes.
Link to anycut: http://db.tt/lfo4OSGy
brickeds3 said:
Used the method posted here to get my MSL. It worked great to open the ##DATA# menu to remove the sprint proxy. However, when I use it to unlock ##DEBUG# I get the invalid code errors. Sprint game me an alternative MSL which didn't work. I have terminal emulator and the sprint msl .zip.
Any thoughts?
Click to expand...
Click to collapse
I searched and did a post asking for this method and no response and i could not find it, do you have the link?
mvaughn12 said:
I searched and did a post asking for this method and no response and i could not find it, do you have the link?
Click to expand...
Click to collapse
What are you having trouble with, getting the MSL?
billard412 said:
What are you having trouble with, getting the MSL?
Click to expand...
Click to collapse
yes , i have tried the flash also and it doesnt work
mvaughn12 said:
yes , i have tried the flash also and it doesnt work
Click to expand...
Click to collapse
You don't need to flash. Go here and follow easiest method by billard412, can't fail.
http://forum.xda-developers.com/showthread.php?t=1745888
I just posted the sprint lock code for the debug menu. It is the same for all sprint s3's. It is not the MSL. It is the one I posted above.
Sent from my SPH-L710 using Tapatalk 2
slickdaddy96 said:
I just posted the sprint lock code for the debug menu. It is the same for all sprint s3's. It is not the MSL. It is the one I posted above.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I think he wants the MSL tho. And u don't need the debug code you posted if you use the anycut method I posted above
slickdaddy96 said:
Sprint's unlock code is
777468
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
i tried the anycut and when i check for msl it ask for code so the 777468 is that ##77468#
[/COLOR]
mvaughn12 said:
i tried the anycut and when i check for msl it ask for code so the 777468 is that ##77468#
Click to expand...
Click to collapse
The 777468 is the code needed in the debug(##33286#) menu. The msl is the one for the data (##3282#) menu
ok i got it to work to use Get My MSL you have to update you busybox, but default just a regular root seems to install busynbox 1.20.1 you have to upgrade to 1.20.2 and the get my msl will work. just tried it and got my msl coded you can download the latest busy box from the market.
---------- Post added at 02:05 AM ---------- Previous post was at 01:40 AM ----------
works like a charm had to speed of my 3g since no LTE coming to colorado for who knows when. if you try it allthe portsettings are under multimedia
then you can put in the following
1. Get your MSL, by calling Sprint or by using CDMA workshop like i explain below
2. After you have your MSL go to your phone and type ##3282#
3. Click Edit Mode
4. Click Advanced
5. Scroll down to RTSP/HTTP Setting
6. Change RTSP proxy IP to 0.0.0.0 or You can leave this blank if you like
7. Change RTSP proxy Port to 0 (Zero)
8. HTTP proxy IP to 0.0.0.0 or You could leave this blank if you like
9. HTTP proxy port to 0 (Zero)
10.Go enjoy Downloads and a .20-.60 mbps increase in 3G speeds!
NOTE for Samsung Galaxy S3 the Default under multimedia
rtsp proxy ip: rtsp.vog.sprintpcs.com
rtsp proxy port: 554
http proxy ip: pd.vog.sprintpcs.com
http proxy port: 8085
lte
You are better than sprint!
Sprint kept telling me that the unlock code was the same as the MSL. Thanks everyone! I still can't get my data much above 20k (often lower than that). last night until this morning it was over 1MBs, but no more. The data is HORRIFIC. I wish I knew how slow slow really was (slower than dialup!).
No, the unlock code is the code for the ##DEBUG# menu. The MSL is the master subscriber lock that is used under the ##DATA#. Take a look at this thread to see how to get the MSL: http://forum.xda-developers.com/showthread.php?t=1745888&page=3.
By chance did you take the OTA update since you were getting 1.0Mbps? Look at your baseband and see if your last 3 say LG2. If they do it might be the OTA that killed your speeds. Search about it and you will find the way to revert if you are having issues.
Sent from my SPH-L710 using Tapatalk 2
mvaughn12 said:
i tried the anycut and when i check for msl it ask for code so the 777468 is that ##77468#
Click to expand...
Click to collapse
Thanks for the input. I did update the baseband, but the speeds were slow. Sprint officially said that the network is seeing "a lot of traffic" in my area. The good news is that in 2 weeks they'll do a data upgrate to the local tower (I've heard that before). And in 7 months we get a T1 line! (Only will help marginally, if at all).
I think I'm going to start working to get out without paying ETF. I'm trying to find the contract's arbitration provision to go that route if needed.
If anyone else is in doubt, DON'T GET THE SPRINT GALAXY S3, THE DATA IS SLOWER THAN DIALUP!!!! (I get 8-20k down 123k up most of the time, even on the weekends).
That is a matter of opinion though. I live in the Atlanta area and my S3 is giving me 30 down on LTE and on 3g I get 1.5 down.
Sent from my SPH-L710 using Tapatalk 2
slickdaddy96 said:
Sprint's unlock code is
777468
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
This worked!
mvaughn12 said:
ok i got it to work to use Get My MSL you have to update you busybox, but default just a regular root seems to install busynbox 1.20.1 you have to upgrade to 1.20.2 and the get my msl will work. just tried it and got my msl coded you can download the latest busy box from the market.
---------- Post added at 02:05 AM ---------- Previous post was at 01:40 AM ----------
works like a charm had to speed of my 3g since no LTE coming to colorado for who knows when. if you try it allthe portsettings are under multimedia
then you can put in the following
1. Get your MSL, by calling Sprint or by using CDMA workshop like i explain below
2. After you have your MSL go to your phone and type ##3282#
3. Click Edit Mode
4. Click Advanced
5. Scroll down to RTSP/HTTP Setting
6. Change RTSP proxy IP to 0.0.0.0 or You can leave this blank if you like
7. Change RTSP proxy Port to 0 (Zero)
8. HTTP proxy IP to 0.0.0.0 or You could leave this blank if you like
9. HTTP proxy port to 0 (Zero)
10.Go enjoy Downloads and a .20-.60 mbps increase in 3G speeds!
NOTE for Samsung Galaxy S3 the Default under multimedia
rtsp proxy ip: rtsp.vog.sprintpcs.com
rtsp proxy port: 554
http proxy ip: pd.vog.sprintpcs.com
http proxy port: 8085
lte
Click to expand...
Click to collapse
thanks for this info. I can tell a difference in signal. Is there anything I can do in the debug menu to help as well?
billard412 said:
You can access the debug menu without the lock code by using anycut from the market. Add a shortcut to IOTHiddenMenu(screenshot below). Gives you access to all that fun **** w/o the dialer codes or lock codes.
Link to anycut: http://db.tt/lfo4OSGy
Click to expand...
Click to collapse
Dang, that's cool, unfortunately there is no 'activity' for that menu on the Galaxy Nexus (Sprint). Can't find one for Debug, or 1x Engineering.
Okay, I have a GS3. I swapped the ESN (Evo 4G) and now I can't get 3G
The only time I have 3G is on a stock Rom with the MD4 Modem but even than it feels like 1x.
I've tried all the radios, with no luck including the MD4 one. I've been trying to get it working the past two days now with no luck.
Someone PLEASE, please PLEASE help me?
mac19124 said:
Okay, I have a GS3. I swapped the ESN (Evo 4G) and now I can't get 3G
The only time I have 3G is on a stock Rom with the MD4 Modem but even than it feels like 1x.
I've tried all the radios, with no luck including the MD4 one. I've been trying to get it working the past two days now with no luck.
Someone PLEASE, please PLEASE help me?
Click to expand...
Click to collapse
do you have the MSL? Try going to ##data# and making sure everything is set up correctly and even doing a ##debug# and see whats going on there.Make sure you have your radio set to cdma/lte/evdo
Apeleon said:
do you have the MSL? Try going to ##data# and making sure everything is set up correctly and even doing a ##debug# and see whats going on there.Make sure you have your radio set to cdma/lte/evdo
Click to expand...
Click to collapse
I do have the MSL
I'm not exactly sure what I should be seeing in the Data menu, but I have gone in there a few times turning things on and off to try and get things working, otherwise I switch is back to default.
Okay,I can try to help for what I know,what was the purpose of you cloning the esn?
Apeleon said:
Okay,I can try to help for what I know,what was the purpose of you cloning the esn?
Click to expand...
Click to collapse
My uncle's names on our account and I payed my portion of the bill, he decided to quite halfway through the contract so I cloned it to get back on Sprint.
Any help you can give me is much appreciated. I can't stand this 1x :/
Does anyone think it could have anything to do with the donor phone?
mac19124 said:
Does anyone think it could have anything to do with the donor phone?
Click to expand...
Click to collapse
Im not on sprint, but what does it show as the Mobile network type under Settings: About Device: Mobile network type?
I was messing with my phone and had changed the settings in ##DATA#
I was getting 1x only so I had to change the HDR/1x Selection under Data: Others. Hybrid works the best for me, but you could try changing to "LTE + CDMA + EVDO Mode. When I selected CDMA only then it only got 1x and not full EVDO/3g.
If that's not it did you have to enter the HA & AAA secret keys to get data to work?
showcasemodr said:
Im not on sprint, but what does it show as the Mobile network type under Settings: About Device: Mobile network type?
I was messing with my phone and had changed the settings in ##DATA#
I was getting 1x only so I had to change the HDR/1x Selection under Data: Others. Hybrid works the best for me, but you could try changing to "LTE + CDMA + EVDO Mode. When I selected CDMA only then it only got 1x and not full EVDO/3g.
If that's not it did you have to enter the HA & AAA secret keys to get data to work?
Click to expand...
Click to collapse
Earlier OP said he is not sure what he should be doing is ##data# menu, maybe I can break it down
Do ##data# on dialer
click on edit
type in msl
enter in 6 digit MSL
**To Enter HDR/1x Selection Stated Above**
Select Other > Select HDR/1X Selection > Select Mode( Try LTE + CDMA + EvDO, if that doesnt work try hybrid or global mode)
Just browse the data menu but do not touch korean mode ever.
for HA and AAA Keys noted aboved its within the Data Profile in the menu of MSL,
let us know if this helps,going to be honest I am a noob but I can research these things as I have been doing so passively trying to fix my own problem
Thanks for the help guys. I was messing around the other day in the settings and somehow wiped my username and MSID. I got the username back, now I'm trying to get the MSID so i can get my phone back on Sprint. I"m an idiot sometimes... lol
As soon as I get back on Sprint I'll let you know how it works out!
Thanks again
To get msin you can just do phone activation through menu and if that doesn't work a sleight tech can provide a new one
Sent from my SPH-L710 using xda app-developers app