Related
I was trying to put the hum/hiss sound fix on my sd card and I cannot get my pc to connect via USB...
My wife has a TP2 and it connects fine...
I have tried with/without the sd card in, rebooted the pc and phone, rebooted the phone while connected to the pc.... nothing...
wtf...
anyone else with this problem?
PS... NRGZ28 had posted a very basic rom for booting to android back in Feb and it is now gone from hotfile. Anyone know of a quick boot into android?
- Try a different computer
- Try a hard reset
That are the first thing you should do.
Tried hard reset...
Dif PC is not an option at the moment... I have rebooted...
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
FarBeyond said:
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
Click to expand...
Click to collapse
Reboot your PC? lol bet your tried that already...
Try this:
settings > connections > usb to pc > and disable Faster Data Sync then try. This way uses the generic usb drivers and maybe it will connect.
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
FarBeyond said:
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
Click to expand...
Click to collapse
dont think thats working yet
Ya I don't think that works yet, it's tied to Android software drivers and the use of the USB port, since there is no drivers to control the port only to charge battery. Windows thinks there is something there, but the phones USB can't communicate back....I think this is the issue or at lease after playing around with it on my phone anyway
Not that it's a huge amount of help but might troubleshoot down to the hardware level...if you go into bootloader mode on the phone and connect to USB does it connect?
I don't think you should go that deep and dirty. My touch pro 2 works only with only 1 (non-HTC) cable of the 10 i have at home, all are the "standard" mini-USB but only one works flawlessly for communicating/flashing/syncing, the other cables either do the same error - device not recognized - or windows says that the device could communicate faster - and only copies files slowly.
All in all: you should simply check with another USB cable or if you have the factory HTC cable try it with that. I noticed that the cable i am using other than the HTC one is a very good quality thick (low-resistance and double-shielded) USB cable and it never failed on me.
One other thing you should definitely watch for: plug the USB cable into the motherboard USB port directly (on the back of the PC where you plug the keyboard, mouse etc.), sometimes PC cases with front panel USB outputs simply die, or are wrongly attached to the motherboard USB header and it can cause the aforementioned problems too, not to mention if it is wrongly attached it could harm your phone too.
Hi,
I have got HTC DESIRE a day back, I am unable to connect my device to pc, when I plug the cable to PC nothing, neither mobile shows any thing nor PC. Also the device dont start charging. to charge I have to turn the devise of, connect the cable to PC it starts charging then, & if I turn the mobile on it still charges but dont connect to PC,
I have android 2.2, I think its the issue with of OS, is there any way I can reinstall the OS again? my device is not rooted,
Please Help me out, Thanx in advance.
Regards
Hi there
i cant sync my desire,pls help,sync program doesnt recognize my phone, windows 7
aliasif2010 said:
Hi,
I have got HTC DESIRE a day back, I am unable to connect my device to pc, when I plug the cable to PC nothing, neither mobile shows any thing nor PC. Also the device dont start charging. to charge I have to turn the devise of, connect the cable to PC it starts charging then, & if I turn the mobile on it still charges but dont connect to PC,
I have android 2.2, I think its the issue with of OS, is there any way I can reinstall the OS again? my device is not rooted,
Please Help me out, Thanx in advance.
Regards
Click to expand...
Click to collapse
The problem wherein the device doesnt charge when connected directly, and starts charging after plugged in while switched off, is not unique to you. I have faced the same issue. However I have been unable to solve it fully. Cynogenmod Rom when installed does not have this issue, and seems to be unique to Sense based Roms.
Have you installed HTC Sync?
If so, try uninstalling all three HTC Software from Windows-HTC Sync, the Driver Setup, and BMP Driver.
Disconnect the phone.
Now reboot the PC.
Reinstall HTC software fully.
Reboot PC again.
Now start up HTC Sync, and now connect the Usb cable.
droidzone said:
The problem wherein the device doesnt charge when connected directly, and starts charging after plugged in while switched off, is not unique to you. I have faced the same issue. However I have been unable to solve it fully. Cynogenmod Rom when installed does not have this issue, and seems to be unique to Sense based Roms.
Have you installed HTC Sync?
If so, try uninstalling all three HTC Software from Windows-HTC Sync, the Driver Setup, and BMP Driver.
Disconnect the phone.
Now reboot the PC.
Reinstall HTC software fully.
Reboot PC again.
Now start up HTC Sync, and now connect the Usb cable.
Click to expand...
Click to collapse
Thanks for your response, Actually I am unable to connect my device to pc, then how can i install any other ROM??
The procedure I have read from the websites require the PC to be connected with the device.
Also I didnt installed three things in my PC to sync, I just installed the HTC sync I downloaded it from the HTC website, Please tell where can I find the other two things.
Also there is an update, I have replaced the cable, Now when I connect the device to the PC, windows 7 shows un known device. But nothing is shown in the Mobile, no notification, & no list to select either "charge only" or "Disc Drive" etc
Thanks for your help
Regards
Hmm this sounds allmost exactly as USB-brick (i had one). Did you buy completely new phone or used one. You say its unrooted? Have you messed with your phone (flashing custom roms etc)?
godina said:
Hmm this sounds allmost exactly as USB-brick (i had one). Did you buy completely new phone or used one. You say its unrooted? Have you messed with your phone (flashing custom roms etc)?
Click to expand...
Click to collapse
No the phone is used one, but used only 2 or 3 days with no any scratch or any mark on it. I would have to replace the USB port of the device??
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Bladeinger said:
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Click to expand...
Click to collapse
Your device manager shows anything when you connect it to your pc?Debugging mode is enabled?
Device Manager shows nothing. Debugging Mode is enabled.
I went through a similar problem a while back - took ages to resolve it - in my case the problem was the usb cables I was using - I had tried a few - but its possible to get cables that only charge and dont communicate - eventually i got it fixed by using a new original cable.
Might not be this for you but it certainly helped me
No fix that I know of...
I had this problem...
I tried different computers, different SD cards, I could take the sd card out and put it in a usb holder and that would work fine, so it really wasn't the sd card. I tried different usb cables too.... nothing would work.
I spoke to my carrier (Orange) to see if they could sort out the problem, and they went through their 'script' of diagnostics and came to the conclusion that it was my computer drivers and there was nothing wrong with the phone!!!
I then rang HTC and after several phones calls later, they said that they would repair it, unfortunately that would have left me without a phone for 2 weeks, so I rang Orange again to demand that they replaced the phone! I told them that HTC had said it was a fault and they sent out a replacement Luckily I had not rooted it at this point, so it was easy for me to swap it.
The replacement phone came the next day, and like magic, worked fine when I connected it to my computer (the same one that apparently had faulty drivers!!)
So, I never found a fix for this, but managed to get a replacement! hopefully you will be able to sort something out...
Good luck
I had this problem once and it turned out to be kernel related, but I'm not sure if this would apply in your case since you've flashed a few ROMs and still have the issue. Still, might be worth trying one of Apache's Buzz kernels or LeeDrOiD's latest... if only to rule out another possibility.
does your PC recognize it if you mount the SD in recovery?
if not, it should be the cable
I had the same thing, I went crazy, and somebody told me to use another cable
and worked
Same happened to me.
Seems the phone crashed the USB controller or something on the PC.
A reboot of the PC fixed it for me (I dont see you mention that anywhere).
First of all, thanks a lot for all your replies!
As I said before, I tried 2 different cables, that both worked fine before. But after your replies I tried a third, new one - same result.
The card is recognized fine by windows when I put it in a USB-Card Adapter.
What I forgot to mention in my initial post, is, that I also formatted the card in my pc, put it back in the phone and started the phone new - same result.
I will try some other kernels now. B.t.w., has anyone a solution for flashing the radio without pc? Via terminal, or recovery? As this is one of the few things, that I couldn't try yet.
I'm 99% sure radio wont be a factor in this mate as they only deal with mobile connections, eg GSM/3G, Bluetooth, WiFi and GPS. If the problem is software and not hardware then I think it will be with the Android USB gadget driver, which is in the kernel. Someone please correct me if I am wrong.
Can you mount as usb in CWM?
No, that doesn't work either.
Sent from my Desire HD using XDA Premium App
1) Try reinstall HTC driver on your windows and try again.
2) If it failed, backup all your files on sd card via USB-Card Adapter. Then use SD Formatter 3.0 (google it) to format the sd card. Copy the backup files back to SD card and try mount the usb again.
HELP i got the same problem
I use the phone in the last 6 months; I have S-OFF, clockworks custom recovery and rooted stock HTC 2.2 Froyo. The only change I made last week is purchasing a desktop cradle "stand". I tested the stand several times the last week and I was able to access the SD card & the HTC sync modes successfully.
Now when I connect the phone using stand or any other USB cable including the original HTC; nothing happened on the computer! The USB manager activates and brings up the USB connection type menu. However, nothing recognized by PC.
I tried all things that you can expect (another PC, another cable, factory reset, new room, with/without cradle) nothing happened, even I connected the phone on a new PC it didn’t detect the new driver!
What to do now??
Hi,
Not sure if you have already, but you can try the new HTC sync version 3.0.5557 - It's actually for the HTC flyer tablet, but i installed it and it works perfectly for the DHD.
You might have a driver issue, but the new 3.0 sync comes with new windows drivers so maybe it's worth a shot.
I've checked the HTC Flyer support page but there's no link there for the 3.0 Synch ... I could only find a direct link, here below
http://www.htc.com/www/SupportViewNews.aspx?dl_id=1097&news_id=923
Be sure to un-install the previous HTC sync first
Its not a driver issue, I tried the new sync. Not working. Nothing is working with USB only the charger.
I have a feeling that electrostatic damaged my USB. I remembered last week I touch the phone while charging and a one electrostatic click was strong.
help!!
Bladeinger said:
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Click to expand...
Click to collapse
hey I have same problem... :-/
what's the solution ?? plz tell me
same problem
please help
i had notice there is alot similar post to this problem but none really solved it. so i start this thread to make it more specific
1) once connected to pc, my wildfire automatically charge
2) no pop-up or option on the top to slide down to select either htc sync, mount as sd card, etc
3) tried reboot, mount unmount card, untick usd debugging, changed other rom, but still not working.
4) if connected to pc still automatically charging even if i change "default connection type" to disk drive, or usb tethering
5) i tick "ask me" so i can choose the connection type when connect to pc, but when connected to pc, nothing. just charging.
i'm rooted, using hg hybrid v3 (problem was there before i flash HG rom). it used to work before. i dont recalled when was the last time it start to behave like this. all this time i thought i set the connection default to charging, but when i want to transfer songs, only then i realised this problem. i m not sure which custom rom might cause this problem (if it does) because i had flash more than 10 roms
i have same problem with cm7
I haven't try to format my sd card. because when I connect without sd card, still no connect option. if my card is malfunction/the main problem, then my phone should work fine n show the connect option after I remove the card, right? (I do have connection option on the setting. what I meant no connection option is the pop up conection menu+connection option on the top bar. changing the connection on the setting change nothing)
I too have this prob but never questioned this as i never use htc sync. But if u really wanna use it try this i'm not sure it may work or not but mostly its due to driver problem:
1.Connect your device in htc sync mode.
2.Uninstall or Remove all drivers of htc and also htc sync.
3.Disconnect your device and Restart your pc.
4.Reinstall htc sync and connect your device in htc sync mode.
5.It'll install fresh drivers for your device and if asked to restart then do it else run htc sync.
If you are running vista or later try to run htc sync in administrator mode.
I'm not sure this method work but there's no problem on trying it. Reply your result after doin above steps
I also think the problem might related to my driver but I remember that when I first connect to my pc, there will be pop up menu, and my phone automatically recognized as "disk drive" (I m not install HTC driver yet. infact ,I install the driver after my phone connected to my pc through disk drive connection since the driver located on the SD card). nway, I"ll try your method and post the result later.
I just notice this might not work..the problem is I cannot change the connection. even if I did, it doesn't change the connection. it just charging.. as if I put it on default "charging" as it connect. but I will try later anyway
When i connect my phone the debugging icon shows up and my pc makes the noise but doesnt let me choose mass storage (running cm7). it shows up on my pc on drive f: but when i click it just says please insert a disc into removable storage F:
xynok, did u tried untick the usb debugging? go to setting, application, development, untick usb debugging. u still lucky at least it prompt u something if u connect to pc, mine nothing. its like I plug it to the socket wall not pc
anakhanjing said:
xynok, did u tried untick the usb debugging? go to setting, application, development, untick usb debugging. u still lucky at least it prompt u something if u connect to pc, mine nothing. its like I plug it to the socket wall not pc
Click to expand...
Click to collapse
yeah i tried that
lokeshramesh said:
I too have this prob but never questioned this as i never use htc sync. But if u really wanna use it try this i'm not sure it may work or not but mostly its due to driver problem:
1.Connect your device in htc sync mode.
2.Uninstall or Remove all drivers of htc and also htc sync.
3.Disconnect your device and Restart your pc.
4.Reinstall htc sync and connect your device in htc sync mode.
5.It'll install fresh drivers for your device and if asked to restart then do it else run htc sync.
If you are running vista or later try to run htc sync in administrator mode.
I'm not sure this method work but there's no problem on trying it. Reply your result after doin above steps
Click to expand...
Click to collapse
not working..
try this if u r using sense roms . Also try this for AOSP roms, if there is an option(i dont know about AOSP).
Go to Settings/Applications/Manage applications/All/
Then search for "Connect to PC". Actually in stock roms that was an app by htc. But there must be something similar to that in AOSP roms. Then open that and select, "Force stop" , "Clear data", "Clear cache".
I dont know for sure if that solves the issue or not. But have a try.
And by seeing this thread, actually i got a doubt, "can we synchronise the htc sync in AOSP custom roms". Since AOSP is nothing but removing the HTC crap. Can someone confirm this .......
bharatgaddameedi said:
try this if u r using sense roms . Also try this for AOSP roms, if there is an option(i dont know about AOSP).
Go to Settings/Applications/Manage applications/All/
Then search for "Connect to PC". Actually in stock roms that was an app by htc. But there must be something similar to that in AOSP roms. Then open that and select, "Force stop" , "Clear data", "Clear cache".
I dont know for sure if that solves the issue or not. But have a try.
And by seeing this thread, actually i got a doubt, "can we synchronise the htc sync in AOSP custom roms". Since AOSP is nothing but removing the HTC crap. Can someone confirm this .......
Click to expand...
Click to collapse
nope. still nothing. anyway since it had this problem, I had wipe my wildfire few times, n try different rom.. maybe it is because of faulty cable. but if the cable is the culprit, why it still charging? is it possible the cable is broken but still can charging?
anakhanjing said:
nope. still nothing. anyway since it had this problem, I had wipe my wildfire few times, n try different rom.. maybe it is because of faulty cable. but if the cable is the culprit, why it still charging? is it possible the cable is broken but still can charging?
Click to expand...
Click to collapse
Not telling that it should be, but definitely there is a possibility of a cable culprit.
The USB male/female end has 4 connections in which two connections are used for voltage and the remaining two connections are used for data transfer.
There might be a possibility that the data connection got broken with voltage connection retaining. Try with another cable (any USB v2 cable).
And one more thing, for having the disk drive option, nothing need to be installed in the pc. U need to install htc driver in the pc only if u want to use usb debugging , usb tethering.
[But at the wildfire end the cable has 5 connections and i dont know what the 5th one is for. mostly it will be a NO CONNECTION]
Now i got another idea to diagnose ur issue.
Well do u know of application "pdanet". It uses USB DEBUGGING feature to tether ur phone internet to PC. Actually usb debugging can be used both under charge mode and disk drive mode. What u can know on doing this is whether usb debugging through ur phone is working or not. U can diagnose the thing while checking with every app that uses usb debugging. So try it. Enable the usb debugging in phone first.
---Install pdanet desktop version and follow the setup instructions. It asks to connect ur phone during setup to install usb driver and also pdanet.apk to mobile. Connect ur phone with usb debugging enabled. I doubt whether desktop version installs or not because of ur issue. Mostly desktop version of pdanet will not install without a phone connected having usb debugging enabled. And if the desktop version is installed successfully, that means ur phone usb debugging is working. And if desktop version is installed successfully, that means it also installed the mobile version of pdanet.apk to ur phone (which says that data transfer is working). Then open the pdanet on phone and enable usb tether. Then open pdanet from desktop and connect. Then see whether u r able to access internet from pc.
---One more method is try to use ADB from android sdk. It also uses the usb debugging feature.
If adb and pdanet works, that means usb debugging feature on ur phone is working. If it is so, then it is mostly not a cable problem (as far as i know). And if they dont work there is a chance that it is a cable problem.
......................................................................................................................................................................................
And one more thing. If u have used a stock rom (freshly formatted), and faced the issue, then it is mostly not a software problem. Then it might be cable problem or some kind of problem in ur phone. Also check ur phone radio version. Thats all.
bharatgaddameedi, i cant install pdanet. it say android phone not detected. error =103. i think u were right. its hardware related problem but its look like not the cable. most probably its my wildfire usb jack. i test the cable with other mobile, its working (test it on nokia 5800). before i had this problem, sometime i use htc cable to transfer data for my 5800, and some time i used 5800 cable to transfer data for my wildfire. the difference between the two cable pin might damage my wildfire usb jack.. (u said htc cable got 5 pin, so i asume nokia got 4?)
anakhanjing said:
bharatgaddameedi, i cant install pdanet. it say android phone not detected. error =103. i think u were right. its hardware related problem but its look like not the cable. most probably its my wildfire usb jack. i test the cable with other mobile, its working (test it on nokia 5800). before i had this problem, sometime i use htc cable to transfer data for my 5800, and some time i used 5800 cable to transfer data for my wildfire. the difference between the two cable pin might damage my wildfire usb jack.. (u said htc cable got 5 pin, so i asume nokia got 4?)
Click to expand...
Click to collapse
So, pdanet not detecting the phone means usb debugging is also not working under charge mode. That should be phone hardware related problem like u have said about usb jack.
And No. All the micro USB version 2 cables will be the same. Its same for 5800 and wildfire. I use my previous 5233 cable to my wildfire even now.
The usb jack of wildfire may damage if u have used it in an improper way. Something like pressure on the cable when connected and so on...
So, its not something we can solve here. That should be given to service centre as far as i know
anakhanjing said:
the difference between the two cable pin might damage my wildfire usb jack.. (u said htc cable got 5 pin, so i asume nokia got 4?)
Click to expand...
Click to collapse
Can't be. I am using my N82's data cable for data transfers on my Wildfire from Day 1. The provided data cable is pretty much permanently attached to the wall charger.
I accept the fact that it might be hardware problem but there is one more thing I want to try. how about flashing stock rom from pc? flashing 2.1 is ok since it can be rooted again. I had flash stock rom but from the clockwork mod, not from pc, and the hboot is been remove for save flashing. I never try this before because all this time I thought that the problem was cause by custom rom, so I just need to find the right custom Rom.
How can u flash a stock Rom from pc when the usb is not functioning. RUU will not work.
Things get worse when basic things stop functioning.
Sent from my HTC Wildfire using XDA App
Did you try mounting your SD Card via Recovery? Reboot into Recovery > Advanced > Mount SDCard
I'm running cyanogenmod 7 on my evo 4g and when I plug it into a computer it only charges and never prompts me if I want to connect as a disk drive. It used to but now it just stopped. I had a backup of my rom so I put it on my girlfriends evo and hers still connected to the pc like normal but mine will not give me the option to hook up through USB. My computer says unknown device. Any help would be great. I can provide more info if you need.
More info. It gives me code 43 in windows 7. I was able to hook it up in xp but when I tried doing anything it no longer was able to detect the phone. I did a factory reset and it still doesn't work. I'm at a complete loss. I feel the only thing left to do is revert completely back to stock losing root and starting from scratch.
perhaps try completely uninstalling the device from windows in Device Manager. Then plug it in again and let it re-install the drivers
sitlet said:
perhaps try completely uninstalling the device from windows in Device Manager. Then plug it in again and let it re-install the drivers
Click to expand...
Click to collapse
I've tried that on two different computers with windows 7. My gfs fone reads fine with the exact same rom but mine wont.
It seems like the drivers on the phone are corrupted or something. At one point I found a forum that suggested to turn off bluetooth and a few other things. I decided to see if turning off my wifi would do anything and finally my phone showed the usb debugging notification and the mount as usb notification but it wouldn't mount so I restarted my phone and now it's back to doing nothing but charge the phone.
The only difference between the two phones is the rom then? Perhaps make a backup and flash a different rom or re-flash your current rom to see if that helps
sitlet said:
The only difference between the two phones is the rom then? Perhaps make a backup and flash a different rom or re-flash your current rom to see if that helps
Click to expand...
Click to collapse
I actually took a backup of my rom and put it on my gfs phone and hers worked. we had the exact same rom. I will try installing a different rom however and i'll let you know what happens.
Okay so I had a back up of sinister rom so I restored it and now it asks me if I want to connect as a usb device and so I do and my computer still says usb device not recognized or whatever.
Wow so I tried a backup of sinister rom that I had and suddenly it asked if i wanted to connect as a disk drive but windows was still saying usb device not recognized. I reverted all the way back to stock losing root privileges and it still doesn't work. It appears to me that it is a hardware problem. I don't know what else to do.
ok, so I hooked my phone up to a computer with ubuntu on it and my phone showed up but then when I went to explore the sd card it said permission denied. Then I hooked it up in windows 7 and it showed unknown device under universal serial bus controllers(as usual) but it also had it under modem, which is what I want.
Okay, got it working on this computer. After plugging the phone in several times it still said device not recognized. I have also been pushing ##data# and it was saying the same thing. I decided to shut my phone off one last time and when I hooked it up i pushed ##diag# and now it works. ****ing stupid. Glad it's working now.
UPDATE: Now all of the drivers install when I plug the phone in except the HTC DIAG doesn't appear even when i enter diag mode on the phone. this is the only driver i need installed but i can't install it because the computer isn't picking up that part of the device....This is getting irritating.
Turns out my port is ****ed up. I'm gonna have to order a new one and replace it.