Here is a very alpha build of 4.0.3 for the UMTS 3G Xoom, ie., MZ601 (everest). I'm going to be trying to get something better soon, but it's quite serviceable for now.
Disclaimers/notes:
* There's no guarantees with this build, but if you have any issues, providing an "adb lolcat", "dmesg", or "adb lolcat -b radio" output depending on the issue would at least help.
* The framework is _blindly_ hacked to get a stable data connection, so reliability issues may be present (see below); I will be trying to improve this most of all for a subsequent build. Let me know if anyone's interested in the technical details. I will be providing patches of some kind later.
* The RIL's been taken off a 3.2 Telstra AU build and tested on an AU device on Telstra only. Unknown if this works at all for overseas users of the 601, 605, or on other carriers.
* The boot images will start in insecure mode (ie., adb will run as root) but the correct su binary has not been pushed.
Known issues:
* RSSI indications not correct (always shows full strength) (will be fixed in future build)
* If moving and connection drops, data connection is not reestablished properly. To work-around, enable and disable Airplane Mode for this
* after first flash, requires reboot to make data active. (will be fixed in future build)
* gps broken (will be fixed in future build)
Known tested:
* camera
* cellular data connection (although see known issues above)
* wi-fi
* wi-fi tether
* speaker dock
* video playback
Not tested:
* face unlock
* update zips not tested, but probably will not work -- use adb.
* maybe other things
Not provided:
* gapps -- get them elsewhere, and also note above re update zips and adb. Manually installing the "beta" CM ICS gapps seems to work fine.
This is a set of fastboot images: flash all images and "fastboot erase cache", then reboot twice.
http://mediafire.com/download.php?1dfi2hm30dp6bsy
I say thank you! I'll test this ROM in my MZ605 (Brazilian) and report the results. Have a great day.
hey
brilliant, my 601 has just started being awkward with its current 3.2 rom so this is good timing
gonna download and install after work on my UK Mz601 3g
lets see where this goes
ydaraishy said:
providing an "adb lolcat", "dmesg", or "adb lolcat -b radio"
Click to expand...
Click to collapse
LOLCat?
Will test this after work, 've been waiting for MZ601 for ages
Thank you!
_TB_TB_ said:
LOLCat?
Click to expand...
Click to collapse
An easter egg I learnt a while back from mbm...
Hey these sounds really great to get someone working on European 3g Version of ICS.
Could you provide zip file with modified files, or show me list with compare of different file types.
I work also on Stingray Source to get 3g working !!
Hope we could get it work really stable without bugs !!!
Does this widget work for signal strength? Works well on 3.2
https://market.android.com/details?id=com.indepico.netstat
Finally a 601 build! Big thanks. I was using the wifi only versions by teamEOS recently, but then switched back to 3.2, because needed the 3G. I'll give it a try today.
anyone tried this rom and tell how good it works??thx
I can't test it now but great job!
downloading now.. ill give it a try
Downloading and I will report bug for you. Thank for hard work to MZ601
damn just realized i need my desktop to do this
cant do this til later then
EDIT: downloaded it and installed. Had to play around with it abit but it works.
Had to disable and re enable airplane mode then reboot afterwards and that got it to work
Thanks op!
can we overclock with this rom??
Exellent!!!!!!
You can do a backup once installed with ClockworkMod and upload it so
install from SD?, this rom is with root access?
Report I update from 3.2 official MZ 601 dtac network thailand
3G work I have baseband N_01.100.05P
Data connect ok
Camera ok
Bug
Icon show in 3g not H but it's H Mode
Animation in icon 3g and charge battery not show
Next I will test application
teerapong.g said:
Report I update from 3.2 official MZ 601 dtac network thailand
3G work I have baseband N_01.100.05P
Data connect ok
Camera ok
Bug
Icon show in 3g not H but it's H Mode
Animation in icon 3g and charge battery not show
Next I will test application
Click to expand...
Click to collapse
can do a backup with recovery and upload in .zip format?
regards
.... no root (???) ..... gps services need to be activated and need a reboot like 3G .....
Most apps works great ...... no crash or hangs till now ....
Good afternoon. Could someone write the commands that I use via the ADB, to install this .Tar package?
jrenascimento said:
Good afternoon. Could someone write the commands that I use via the ADB, to install this .Tar package?
Click to expand...
Click to collapse
Instructions to Flash & Re-Lock Your Motorola XOOM:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
Related
I have made some updates to the RIL which is the driver for the radio in the phone and would like some people to test it and let me know if they have any issues with signal (as in no service at all from their provider when they did before the update) and also data problems. Apply the update like any other update, from the android installer menu.
EDIT 6.8.11::
Hello again, done some more updates on the RIL for you all. Seems to sync with the modem app a little better for those that just can't let go. Still don't think it's necessary though. Anyway, a few more minor improvements I believe, give it a go.
Hi Scoot thanks for sharing new kernel and updates for us..
I didn't check ext4 or ext2 compatibility because I always do nand installation, but about RIL update I do have signal issue.
After fresh install, my device gets no services at all but after turn on and of ariplane mode and a very long wait, finally the signal reception is fine. Oh, I guess there is also a problem with data connection because sometimes even with 3G or gprs icon appears in status bar, I get no data traffic in or out when I tried to open market or browser. But when it happened, I do airplane mode again and sometimes it fix the problem
I've tried in both your CM 7 and 6.1.2 with Radio1.65.21.18
Hi Scoot, is a HaRET bootable version possible?
leona said:
Hi Scoot, is a HaRET bootable version possible?
Click to expand...
Click to collapse
Hello Leona, i appreciate the donation i received a while ago, little things like that make working on this even more rewarding and worth the challenge You can obviously test the RIL with haret and I have attached a zImage to the first post which you can put in your haret folder
The zImage is untested because i don't use haret so let me know if there are any problems.
Thanks Scoot and no problem.
The Kernal seems to boot fine.
I'm having the usual fun of trying to get into the install menu, so have not been able to apply the update yet, will let you know.
Thanks Scoot, seems to work fine - I don't get any signal problems with the your new kernel and RIL. Data is working correctly too. (using your CM6.1.2 build with radio 1.65.21.18)
What kind of changes have you made to the RIL?
mmec2 said:
Thanks Scoot, seems to work fine - I don't get any signal problems with the your new kernel and RIL. Data is working correctly too. (using your CM6.1.2 build with radio 1.65.21.18)
What kind of changes have you made to the RIL?
Click to expand...
Click to collapse
There are a couple of snags with the RIL, in terms of call performance it is much better, but with data after turning it off and turning on again it fails to get a correct IP, but going into the modem app and turning off then waiting for it to turn on and reassign an IP works so I need to look into that. THe RIL has changed massively, lots of bug fixes and extra stuff added in. Signal strength is now reporting correctly rather then just having either no bars, 2 or 4. In theory calls should come in a little faster too but we'll see. There is still work to be done, mainly to data though, i'd like to get it working like a native android phone being run from the ppp service rather then a script which deals with it all at the minute. This should then do away with the modem app so it can be fully controlled by the OS.
Hi have managed to apply the update now, and can confirm that all works well, yes I noticed that the data connection failed at first, but switching between the two o2 options seemed to fix it.
leona said:
Hi have managed to apply the update now, and can confirm that all works well, yes I noticed that the data connection failed at first, but switching between the two o2 options seemed to fix it.
Click to expand...
Click to collapse
Thanks for the feedback Leona
Scoot are the changes made to Ril kernel specific?
I have a '25 branch kernel can I update my system with your patch?
-Arturo- said:
Scoot are the changes made to Ril kernel specific?
I have a '25 branch kernel can I update my system with your patch?
Click to expand...
Click to collapse
The RIL isn't kernel specific, the kernel was just something else I had been working on so you can apply the RIL update regardless of kernel
Excellent,thanks Scoot.
It seems to be working fine except for data issues that you have mentioned before. Now it really shows the correct signal strenght, where I had zero bars before (which was kind of odd) now it shows one bar. Great update.
I update my RIL before 20 min and for now everything look fine.
I haven't tried the RIL yet, but the kernel works well. I had an issue where ramzswap was crashing the kernel whenever compcache did the insmod, but then realized that it was an old module, and that you provided zram.ko instead.
So, the question: does somebody have a compcache.sh that works with zram? Or, a zramconfig utility compiled for our target? I miss my compcache!
I'll try RIL soon.
n2rjt said:
I haven't tried the RIL yet, but the kernel works well. I had an issue where ramzswap was crashing the kernel whenever compcache did the insmod, but then realized that it was an old module, and that you provided zram.ko instead.
So, the question: does somebody have a compcache.sh that works with zram? Or, a zramconfig utility compiled for our target? I miss my compcache!
I'll try RIL soon.
Click to expand...
Click to collapse
To answer my own question, this edit of compcache.sh seems to work for me.
Also, I have your new RIL installed now, and it seems good. Cell-tower location seems to work, although I'm not sure because I haven't moved to a different tower yet. HSDPA data works, and I have one bar right now.
Kernel works fine except standard crash during sleep (can't wake up, qwerty backlight on) once a day. Boots normallly from Haret, no waiting.
RIL kills my data connection, works after turning airplane mode on/off.
Sent from my Not So Super Froyo using XDA App
Is the connection issue strictly for Haret users, or is NAND affected as well?
I've been running 2 phones, one with .25, the other with .32.9, both Liqid's and 1.70.19.9 radio.
Also, AT&T is doing upgrades to our area right now so I might not be a good candidate for testing, but I can give feedback as soon as I get it installed.
PoXFreak said:
Is the connection issue strictly for Haret users, or is NAND affected as well?
Click to expand...
Click to collapse
It is an issue for all users, the problem is in the 'kill connection' code in the ril. I'll be trying to fix it when i get a chance but for now it doesn't stop data from working, it just means that the radio or modem needs to be turned off and on either by toggling airplane mode or using the modem app included in most builds
Tried it with 7.0.2 RLS2 /system on nand /data on ext4. Took a long time to acquire t-mobile and even longer after in/out of airplane mode. Did get a data connection but had to go back to airplane mode after using wifi (wifi worked great). Had it on about 7 hours and received a couple of calls. It woke up for me to answer after 4 rings on the caller end. Then I had to make a call and it hung up immediately after dialing the number(tried several times and numbers). Other than no out calling it settled down and was very usable. May try 6.1.2 (RLS6) tomorrow pm. Thanks for the hard work
Hey does this kernel contains the optimizations for battery use done by Krazy? Cause with his kernel i get a lot of lag after a long sleep period!
I am having issue in connecting mobile data, although I have the "data enabled" option ticked, but there is no mobile data icon appears on the status bar.
I googled and tried lots of apn setting for my carrier however none of them can solve my problem. I have done the "search automatically" method under network operators. Also, I have tried flash newer cyanogenmod nightly and other radio version over my original cyagenmod rom, but none of these help.
Please advice on how could I get my mobile data working again.
Mobile data issue
I am facing the same issue . Any one knows wat could resolve this??
which radio version r u having????
Hope I can help you
Quoted from CM7's official thread for HTC wildfire (Buzz):
If you have any issues with GPS, 3G or any other network issues, try flashing the following radio firmware. NB, it's not possible to flash this zip from ClockworkMod 3, so if you have this version installed, use ROM Manager to flash it instead.
You can find the download link on their thread : http://forum.xda-developers.com/showthread.php?t=1015532
VernonJason said:
I am facing the same issue . Any one knows wat could resolve this??
Click to expand...
Click to collapse
I deactivated my 3G subscription. Deleted the APN. Activated 3G subscription. Recreated the APN and voila I am connecting via 3G. I hope this would help others facing this issue as well.
Bwfclew07 said:
Hope I can help you
Quoted from CM7's official thread for HTC wildfire (Buzz):
If you have any issues with GPS, 3G or any other network issues, try flashing the following radio firmware. NB, it's not possible to flash this zip from ClockworkMod 3, so if you have this version installed, use ROM Manager to flash it instead.
You can find the download link on their thread : http://forum.xda-developers.com/showthread.php?t=1015532
Click to expand...
Click to collapse
Hi,
I have tried all three radio versions, flashed all 3 of them several times for the last 3-4 days but I am still not able to enable the functions of GPS & Mobile Data (Internet) on my rooted HTC Wildfire. Currently I am running Cyanogenmod 7.1.0.1.
I am really going crazy over this. In google maps, location is found only while using wi-fi. With GPS location is not found although the GPS icon comes in status bar. Mobile internet doesnt work at all.
Please help.
Pratyush
As a last resort (this will do a clean wipe of all data) -
Run an RUU for your phone
- Downloaded from android forums.
- Connect phone to PC and run RUU
- This downgrads phone OS to eclair (android 2.1)
- Let it do the bizniss
- Re-root with unrevoked 3
- Re-Flash CM7 and gApps
I flashed my SGY last Sunday. I only noticed the problem today since I tried to used the Wi-Fi about an hour ago.
To my surprise, I can't use it. When I enter into Setup > Wifi Settings > Wifi
when I tick it, it shows Error.
When I look at the Advance Settings of Wi-Fi, the Mac Address is Unavailable.
I was about to bring my phone to Samsung Service Center when I realized that my ODIN Bin Count is 2 so NO warranty service as of the moment.
What should I do to probably fix the problem?
Things that I do with the Phone before I noticed the error on Wi-Fi:
1. Used Meruk's Custom Kernel
2. Flashed Beats Audio [Port]
3. Flashed Bravia Engine [Port]
Can't suggest a solution, just dropped by to say It'd be helpful if you quote which ROM you are using.
P.S. try another ROM..
Sorry. Forgot to mention. I'm using stock DXLC1 rom.
I've also reflashed using ODIN
from stock DXLC1 to DXLA1 still same issue. I'm still searching on how to reset the bin count to 0 so I could bring the phone to a Service Center
Service centres mostly dont check the bin counts(atleast in my region)..Well No need to give it to service center when you have all the tools
Download the stock ROM of your region from this topic and flash it..
http://forum.xda-developers.com/showthread.php?t=1465800
To ensure WIFI works properly you need to download the EXACT region firmware..
When Android boots up, it's highly recommended to set your CSC via the dialer *#272*_your_imei_# (to see IMEI type *#06# in dialer)
If that doesnt work try these tips which worked for me :
1) Install Busybox Installer and install the latest busybox version and restart with WIFI on..after restarting youll have your wifi sorted but you need to keep wifi on everytime you restart
2) Download Wifi Fixes from Market..There are a total of 3 working fixes which fixed my wifi once..
https://play.google.com/store/apps/details?id=org.wahtod.wififixer&hl=en
https://play.google.com/store/apps/details?id=com.bladewififix&feature=search_result
https://play.google.com/store/apps/details?id=com.brilliapps.wifiandmorefixer&feature=search_result
Thanks hitme987.
I shall try your suggestion.
Service centres mostly dont check the bin counts(atleast in my region)..Well No need to give it to service center when you have all the tools
Download the stock ROM of your region from this topic and flash it..
http://forum.xda-developers.com/show....php?t=1465800
To ensure WIFI works properly you need to download the EXACT region firmware..
When Android boots up, it's highly recommended to set your CSC via the dialer *#272*_your_imei_# (to see IMEI type *#06# in dialer)
If that doesnt work try these tips which worked for me :
1) Install Busybox Installer and install the latest busybox version and restart with WIFI on..after restarting youll have your wifi sorted but you need to keep wifi on everytime you restart
2) Download Wifi Fixes from Market..There are a total of 3 working fixes which fixed my wifi once..
https://play.google.com/store/apps/d...ififixer&hl=en
https://play.google.com/store/apps/d...=search_result
https://play.google.com/store/apps/d...=search_result
Click to expand...
Click to collapse
I have done your suggestion and it works.
Steps I did:
1. Re-apply the stock DXLB1 of Doky.
2. Did not use the factory reset
3. Re-apply Root
then all goes well.
=D
I'll post a report at merruk kernel regarding this error so that he may know the problem.
Thank you very much
Running Oxygen 2.3.2 on a rooted and S-OFF HTC Desire (stock HBOOT), which I flashed tonight.
The WIFI appears to connect to my home network but the phone does not actually receive any internet access.
Prior to rooting I was using the WIFI without issues, and nothing has changed in the network since I rooted - my laptop is currently successsfully connected to the internet.
Security is WPA/WPA2, which I changed from WEP ages ago when a buggy tablet wouldn't connect and I was checking it wasn't the encryption that was causing the problem. the phone was connecting to the WPA/WPA2 succesfully. No proxy.
I've searched and haven't found anyone with this exact issue, so I'm not sure how to go about troublshooting.
- I didn't think flashing the Oxygen HBOOT listed on the alphadev site would solve this problem, so I haven't done that yet.
What's your radio version?
rudiik said:
What's your radio version?
Click to expand...
Click to collapse
5.09.05.30_2 (stock radio).
Although I haven't checked since I flashed either cyanogen or Oxygen (WIFI wasn't working on cyanogen and I didn't like the ROM a whole lot anyways), but I don't think custom ROMs touch the radio - unless I'm mistaken?
You should definitively upgrade your radio version to the latest one - 5.17.05.23. You can find download link here: http://forum.xda-developers.com/showthread.php?t=687464 The latest radio is highly recommended when using custom ROM, because they are usually tested with latest radio.
rudiik said:
You should definitively upgrade your radio version to the latest one - 5.17.05.23. You can find download link here: http://forum.xda-developers.com/showthread.php?t=687464 The latest radio is highly recommended when using custom ROM, because they are usually tested with latest radio.
Click to expand...
Click to collapse
Okay, cheers, will do.
EDIT: Nevermind, after scrolling from 2010 to 2012 posts and across two forums, I found the answer (simplest response is on here for anyone interested -- essentially, the method listed is apparently a very old one, pre-recovery days. Just use recovery to flash the radio like you would with a ROM. No wipe needed, apparently.)
I'm assuming you've done this already?
If so, could you explain step 6 - where do I get the .bat script / modaco r5 root pack... Do I even need it since my phone is rooted and has recovery etc?
(I've read several people saying you "just flash it like you would flash a ROM", so I'm guessing that means loading the radio's .zip file onto my SD card and flashing from recovery like I would with a ROM?)
1. Turn your desire off
2. Hold the back button and turn your desire on
3. When you are at the white screen, make sure BOOTLOADER is selected and press the power button
4. Wait a few seconds then press volume down to select RECOVERY and press the power button again
5. When you are at the screen with the red triangle and the phone, plug in the usb cable
6. Run the recovery-windows.bat script from modaco r5 root pack
7. When the recovery menu appears select 'Flash zip from sdcard'
8. Select the radio zip file and press the trackerball to confirm
9. Press the trackerball over 'Reboot system now'
10. When the radio image has finished being written unplug the usb cable
11. The phone will reboot a couple of times and then return to a normal state with your new radio
Click to expand...
Click to collapse
The steps you found are probably outdated. It's really simple. Download latest radio and put it to the root of your SD card. Then you have to reboot to recovery (directly from running ROM or with volume down button pressed when powering up the device). Once you're in recovery, select update from zip (I don't know if you're using Clockworkmod or 4Ext) and choose zip file you downloaded before. Device should reboot and reflash the radio. That's all...
Does upgrading the radio influence the WIFI though?
I've been reading the radio-related post that lists the newest radios and there's a lot of talk about GPS and signal strength improving / worsening with radio changes, but haven't yet found anything relating to WIFI.
salxtai said:
Does upgrading the radio influence the WIFI though?
I've been reading the radio-related post that lists the newest radios and there's a lot of talk about GPS and signal strength improving / worsening with radio changes, but haven't yet found anything relating to WIFI.
Click to expand...
Click to collapse
Yes it's related with WIFI too.
Sent from my HTC Desire using xda premium
Ah crap
Just flashed the latest radio (5.17 etc) as I would with a ROM - yes I did a nand backup using Amon Ra.
Anyways, flashed it - told me it was doing its thing, asked me to restart system to allow it to finish etc, so I did.
It flashed to the HTC boot screen, then returned to Amon Ra recovery
Its now been about 5-10minutes and there's a msg saying:
Build: RA-desire-v2.0.1
Formatting CACHE:...
And that's it. Hasn't moved a bit since that screen and msg came back.
What can I do now? I can navigate the Amon Ra recovery menu, but I'm scared to reboot the system in case I brick my phone.... help please!
salxtai said:
Just flashed the latest radio (5.17 etc) as I would with a ROM - yes I did a nand backup using Amon Ra.
Anyways, flashed it - told me it was doing its thing, asked me to restart system to allow it to finish etc, so I did.
It flashed to the HTC boot screen, then returned to Amon Ra recovery
Its now been about 5-10minutes and there's a msg saying:
Build: RA-desire-v2.0.1
Formatting CACHE:...
And that's it. Hasn't moved a bit since that screen and msg came back.
What can I do now? I can navigate the Amon Ra recovery menu, but I'm scared to reboot the system in case I brick my phone.... help please!
Click to expand...
Click to collapse
So I accidentally solved the problem when I accidentally hit hte trackball and confirmed the "reboot system now" option from the main menu.
Radio is upgraded successfully by the looks of it.
Unfortunately though, WIFI still doesn't work
You've gone through all the trouble of changing your radio. Did you ever bother to try other roms first?
You say that nothing has changed with your wifi connection but you are using a secured connection. Did you even tried a connection with your wifi unsecured and try to establish a connection with the phone?
stankyou said:
You've gone through all the trouble of changing your radio. Did you ever bother to try other roms first?
You say that nothing has changed with your wifi connection but you are using a secured connection. Did you even tried a connection with your wifi unsecured and try to establish a connection with the phone?
Click to expand...
Click to collapse
If you're going to just get narky, then I'm not sure why you're posting, tbh.
Yes, I had used cyanogen 7 prior to oxygen and had the same problem.
And I only flashed oxygen on Monday night, so I don't have the luxury of running around finding unsecured wifi during my work days.
Having said that, a neighbour leaves unsecure wifi on late at night, and I can pick it up and managed to briefly connect to the net before the signal strength died., so yes I'm assuming I can connect to at least one unsecured network.
Which I guess means something's been changed in the scripts running in custom roms vs stock, which isn't helpful.
Well, could you confirm you have the latest radio now? I mean was the upgrade successful? Did you try to do nandroid backup, wipe device and test from scratch with fresh install?
salxtai said:
If you're going to just get narky, then I'm not sure why you're posting, tbh.
Yes, I had used cyanogen 7 prior to oxygen and had the same problem.
And I only flashed oxygen on Monday night, so I don't have the luxury of running around finding unsecured wifi during my work days.
Having said that, a neighbour leaves unsecure wifi on late at night, and I can pick it up and managed to briefly connect to the net before the signal strength died., so yes I'm assuming I can connect to at least one unsecured network.
Which I guess means something's been changed in the scripts running in custom roms vs stock, which isn't helpful.
Click to expand...
Click to collapse
I'm just suggesting things that ya'll may have overlooked. I've used CM and Oxygen and never had any issues with wifi may it be what type of security being implemented.
Well after playing around with my router's settings for ages, I finally made it work by changing the mode from "b/g/n mixed" to "b/g mixed". I was able to keep my WPA2 security on.
- Yep, radio was succesfully upgraded, even though it didn't appear to be.
I guess these custom ROMs do something to the WIFI component of the Desire because I was able to connect to the network with the b/g/n mixed mode in use before I flashed the custom ROMs.
This is annoying because it means I'll likely not be able to use any public WIFI hotspots that are set as b/g/n mixed...
Just to illustrate how tricky this can be. I had the same symptoms on my HTC Desire: Wifi connected OK to a b/g/n router but would not transfer any data through browsers, email, PlayStore, anything really.
Initially running Miui 2.4.9 and Wifi was OK.
Upgraded to Miui 2.4.13 but the ugrade did not complete successfully. The phone worked except that Wifi connected but didn't work.
Restored the phone with an earlier backup of MildWild CM-8.0 ROM which used to have working Wifi. Wifi still no good.
Flashed latest Radio 5.17.05.23. Wifi still no good.
Flashed earlier Radio 5.09.05.30. Wifi still no good.
Flashed full GB Miui 2.4.13 ROM. Wifi still no good.
Re-flashed latest Radio 5.17.05.23. Wifi works!!!! WTF?
I like this disclaimer.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Now upgraded to daily driver!
I don't expect any serious issues with this now, and will call it stable.
Not working: LiveDisplay, themes, you tell me with logs
Root no longer built in with Lineage OS. Use SuperSU
Works: NFC, Wifi, BT, tether, rotation, root, sound, video, MTP, GPS/network location, calls, mobile data, MMS, SMS messages, still camera, videocamera, flashlight, ?
File manager root functions working on 12-28-2016 build.
Also includes microg signature spoofing.
60 step volume control
Pixel home button animation from CypherOS
Use nanomod for microg if you want.
I can't test on dwg/dug but there's a build up for you anyway.
Flash with twrp for htc a5 from twrp.me use 3.0.2 or it may bootloop.
for clean flash, wipe>advanced wipe>system, cache, and data
if wifi and or bluetooth go funny on first boot, reboot a time or two and it should settle down.
seems to dirty flash nicely. wipe dalvik cache and cache. Be aware that dirty flashes may cause weird little glitches you can avoid with a clean flash then setting it all up from scratch.
Then flash rom.
If you had gapps and dirty flashed, be sure to flash arm-7.1 gapps before rebooting. If you're using microg, you shouldn't need to copy anything into /system, that set of gapps installs just fine as user apps, and should survive a dirty flash.
ROM folder link in post 2.
Download the md5sum file with the rom so twrp can verify it isn't corrupted before flashing.
for those having issues with boot reverting to fastboot from corrupted /data partitions who do not want to format /data to fix it; (single SIM version. If you need a dual SIM version pm me and I'll build/upload one.)
attached here on this post, unpack boot.img from non-flashable zip file.
Back up your boot.img with trwp before flashing.
flash by fastboot or recovery, for latest ROM release with the errors=panic flag set in the fstab.
Source: cm lineageos, branch cm-14.1
roomservice.xml with my tweaks
https://github.com/bigsuperprojects/android_roomservice
patches (signature spoofing and enhanced volume control)
https://github.com/bigsuperprojects/cm-14-patches
pixel home button animation
https://github.com/bigsuperprojects...mmit/51f6d0f98ea614d61f9500397fe6761867a232c9
download folder
reserved for screenshots
Tweaks
@rjcool1999 put together
stock htc camera and gallery
Hi bigsupersquid,
My phone is dual sim a5_dug. I used open_gapps-arm-7.0-aroma-20160925.zip
Works : wireless, bluetooth, rotation, fm radio, root, location (tested with maps)
No : Phone calls, mobile data, camera, sd-card
New build uploading
Phone still broken but MMS and mobile data working on chl once the ril randomly starts up
A5_Dug
Its great to hear that first Alpha released.. Thanks buddy..hope we will get a cell working version soon...
This looks very promising. Great progress,thanks @bigsupersqiud.
First I wanna say this ROM is amazing
no mobile data ,phone call , camera ,ROOT work on my a5 ul. I've got my carrier name and APN by the phone itself,but no mobile data.
SD card worked for me !!
Check it out
BTY,How can I do to let my official filpcase worked on cyanogen
frank9184 said:
First I wanna say this ROM is amazing
no mobile data ,phone call , camera ,ROOT work on my a5 ul. I've got my carrier name and APN by the phone itself,but no mobile data.
Check it out
Click to expand...
Click to collapse
Root works but cm14 file manager is known to have issues with root.
You might try other apps that need root. Connectbot or built in terminal work fine with su, for example.
Definitely no phone calls, incoming or outgoing calls both cause soft reboots.
Mobile data works on my chl... When the ril actually starts up. Until then, no sim it says. Only on the second release, though. First release, no data even when ril is running.
You can try entering your apn in cellular network settings maybe, but not until it shows a cell signal.
There's a hidden framework file with APNs, I didn't get data until I fixed it. Post your complete apn and carrier and I'll see if it needs added.
bigsupersquid said:
Root works but cm14 file manager is known to have issues with root.
You might try other apps that need root. Connectbot or built in terminal work fine with su, for example.
Definitely no phone calls, incoming or outgoing calls both cause soft reboots.
Mobile data works on my chl... When the ril actually starts up. Until then, no sim it says. Only on the second release, though. First release, no data even when ril is running.
You can try entering your apn in cellular network settings maybe, but not until it shows a cell signal.
There's a hidden framework file with APNs, I didn't get data until I fixed it. Post your complete apn and carrier and I'll see if it needs added.
Click to expand...
Click to collapse
I will dig it at framework.apk later .
Besides ,how can I do to let my official filpcase worked on cyanogen? Use dotmatrix.apk on stock ROM ?
frank9184 said:
I will dig it at framework.apk later .
Besides ,how can I do to let my official filpcase worked on cyanogen? Use dotmatrix.apk on stock ROM ?
Click to expand...
Click to collapse
You could try the apk from stock on the same cm android version (5.0 to cm12, 6.0 to cm13) and see if it works. Think the Hall sensor (magnet sensor) isn't getting registered properly as an input device though, log says it's a keypad instead.
Decompiling framework may not be feasible yet unless small/baksmali are updated for N. I don't know if they are or not. I build the file in instead.
If you can post your carrier MCCMNC it'll help me debug that. Virgin mobile us is 311490, sprint us is 310120 or 31000.
You can find it in your log on cm12 or cm13 in adb while it's running and connected to data...
logcat -db all | grep -i apn
Should give a big spammy list of APNs being tried and used by the system.
Or the /data/data/com.android.providers.telephony/databases/telephony.db from cm13 with data connected, has the info I need in it as well
logcat -db all | grep -i apn
http://pasted.co/78e345aa
P.S.I don't know which site is better for me to paste the log .So I using the site which is searched by Google
And the dB
http://www.mediafire.com/download/kc5wsus34ag3qbz/telephony_-_副本.db
I don't know why attach file is broke with cyanogen mod 13 broswer
AFAIK, magnet sensor don't work on any cyanogen build ,even place dot matrix.apk which is let stock ROM magnet worked
bigsupersquid said:
Root works but cm14 file manager is known to have issues with root.
You might try other apps that need root. Connectbot or built in terminal work fine with su, for example.
Definitely no phone calls, incoming or outgoing calls both cause soft reboots.
Mobile data works on my chl... When the ril actually starts up. Until then, no sim it says. Only on the second release, though. First release, no data even when ril is running.
You can try entering your apn in cellular network settings maybe, but not until it shows a cell signal.
There's a hidden framework file with APNs, I didn't get data until I fixed it. Post your complete apn and carrier and I'll see if it needs added.
Click to expand...
Click to collapse
The same reboot problem got fixed on moto g while calling..you can check that if that solves the reboot problem....thanks for your hard work mate
nageswarswain said:
The same reboot problem got fixed on moto g while calling..you can check that if that solves the reboot problem....thanks for your hard work mate
Click to expand...
Click to collapse
Wonder if they used @mickybart 's lovely ril.
I found it skimming XDA Sony forum I think.
9/27 release uploading, can make and receive calls once the dang ril kicks in. Still APN glitches for non sprint/virgin mobile.
bigsupersquid said:
Wonder if they used @mickybart 's lovely ril.
I found it skimming XDA Sony forum I think.
9/27 release uploading, can make and receive calls once the dang ril kicks in. Still APN glitches for non sprint/virgin mobile.
Click to expand...
Click to collapse
Will it work on a5dwg too???
A5dwg is getting very less support.
Even the 3g 2g selection is not get solved on cm13 over 5 months... Hope that bug will not continue in 7.0
Keep up the good work...I will flash it on a5dwg tomorrow and let you know the results
nageswarswain said:
Will it work on a5dwg too???
A5dwg is getting very less support.
Even the 3g 2g selection is not get solved on cm13 over 5 months... Hope that bug will not continue in 7.0
Keep up the good work...I will flash it on a5dwg tomorrow and let you know the results
Click to expand...
Click to collapse
I dunno but the same ril worked in cm13 for ul and dwg.
I'd be happy to extend support if someone wants to send a dwg or dug to make immediate tests with.
Otherwise it just gets the same changes as the chl/ul. //edit: sometimes I grab m8d changes for dual sim to test as well... Not always though. Really need one in hand to test with. A lot of builds don't get uploaded cause they test bad somewhere. Takes hours to upload a build and they fail uploading partway through often.
bigsupersquid said:
I dunno but the same ril worked in cm13 for ul and dwg.
I'd be happy to extend support if someone wants to send a dwg or dug to make immediate tests with.
Otherwise it just gets the same changes as the chl/ul. //edit: sometimes I grab m8d changes for dual sim to test as well... Not always though. Really need one in hand to test with. A lot of builds don't get uploaded cause they test bad somewhere. Takes hours to upload a build and they fail uploading partway through often.
Click to expand...
Click to collapse
I actually mean that flashing this on a5dwg for testing will be OK or will it brick the device..??very confuse as there is various models in HTC desire 816
Sim not worked?
Enviado desde mi hi6210sft mediante Tapatalk
nageswarswain said:
I actually mean that flashing this on a5dwg for testing will be OK or will it brick the device..??very confuse as there is various models in HTC desire 816
Click to expand...
Click to collapse
fine on ul tl chl dwg dug. not for mediatek variants.
matamata15c said:
Sim not worked
Enviado desde mi hi6210sft mediante Tapatalk
Click to expand...
Click to collapse
yeah, ril is pretty messed up, sometimes doesn't turn on for whole reboot on mine, sometimes pops on within a few minutes. random and unpredictable