Can't seem to get the YouTube app to play video. Tried two different roms and no dice. Its almost like there's no data traffic on either wifi or 3g. Has anyone else had this issue?
Sent from my Galaxy Nexus using xda premium
Running stock ROM with no problem here. If I were you, I would try another ROM or a new/old version of the same ROM. Sometimes apps get broken in ROMs.
Dang haha, but I love this rom !!! I suppose I could nandroid back to stock... Anyone else had this?? Bump!!
whirl08 said:
Dang haha, but I love this rom !!! I suppose I could nandroid back to stock... Anyone else had this?? Bump!!
Click to expand...
Click to collapse
Uninstall YouTube. And redownload it from the market, what ROMs are you using? kernel?
Running stock and its runs beautifully
I prefer stock over custom ROMs in terms of stability and overall battery performance.
zephiK said:
Uninstall YouTube. And redownload it from the market, what ROMs are you using? kernel?
Click to expand...
Click to collapse
using Bigxie's #2 build with Franco's kernel.
whirl08 said:
using Bigxie's #2 build with Franco's kernel.
Click to expand...
Click to collapse
Latest build is #7-2... maybe you should update your Bigxie ROM?
Latest franco kernel is also #11. It's a very good kernel, improved from his previous builds. Update that as well.
I'd recommend doing a FULL WIPE (wipe factory settings, cache, dalvik) and flashing the ROM then gapps then kernel.
also update your radio to kk6 if you havent already.
reuthermonkey said:
also update your radio to kk6 if you havent already.
Click to expand...
Click to collapse
or one of the latest UG radios. UG radios = optimized for North America. But I personally use XXKK6 over the UG radios. Up to you, I'd try both and see which one is better for you because mileages will vary.
Related
With the new update for the evo can I now use that kernel on other roms that run 2.3 with sense 2.1 and will it fix the brightness issue?
Sent from my PC36100 using XDA App
Depends on the rom! Just from my experience the version MIK tweaked from the MikG v1.0 - Re-Engineered GB Sense 2.1 + 3.0
[Kernel] - 2.6.35.10-htc-kernal_and18-2 - from the OTA:" worked for me on misfits and of course miks rom
http://forum.xda-developers.com/showthread.php?t=1038967
It is in his OP thread.
I am running Gengersense B4, and I spent today updating to all of the new radios. The last thing I did was find the kernel included in yesterday's Gingerbread OTA, and of course, my Wifi now says "error".
The brightness problem with the leaked GB kernel is fixed, but my wifi no longer works. Anyone else with this problem?
I'm using Sac's Kingdom Rom V4 and the new kernel fixed my brightness issue (also made everything run much smoother).
Ya I updated all that crap and then my phone wouldn't sleep. Sometimes don't fix it if it ain't broke. I will probably try it again though.
zone23 said:
Ya I updated all that crap and then my phone wouldn't sleep. Sometimes don't fix it if it ain't broke. I will probably try it again though.
Click to expand...
Click to collapse
Did you update to the 2.15 PRI? I know the 1.90 was quirky with newer baseband versions and was causing wakelock. I went with 2.15 today and also update the radio to 05.02, and I'm not getting any wakelock.
dcyouknow said:
I'm using Sac's Kingdom Rom V4 and the new kernel fixed my brightness issue (also made everything run much smoother).
Click to expand...
Click to collapse
Is your wifi working? I'm frustrated because I finally got this rom fixed up for everyday use, the new radios were working great, and my LAST task to update the kernel fixed the brightness, but made my wifi crap out.
There are 2 kernels out one for the stock ota update and one modified for all other ROMs make sure you have the right one .
Here is a link .
http://forum.xda-developers.com/showthread.php?t=1038701
But I think you could find it in that link a few posts up from the mikg ROM.
Sent from my PC36100 using XDA App
linsalata28 said:
There are 2 kernels out one for the stock ota update and one modified for all other ROMs make sure you have the right one .
Here is a link .
http://forum.xda-developers.com/showthread.php?t=1038701
But I think you could find it in that link a few posts up from the mikg ROM.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thanks linsalata28. I probably flashed the kernel for the stock rom. I need to flash the other kernel for Gengersense, correct?
I will post back after trying the non-stock.
ss12108 said:
I am running Gengersense B4, and I spent today updating to all of the new radios. The last thing I did was find the kernel included in yesterday's Gingerbread OTA, and of course, my Wifi now says "error".
The brightness problem with the leaked GB kernel is fixed, but my wifi no longer works. Anyone else with this problem?
Click to expand...
Click to collapse
I'm not using the kernel, but from what I have heard, it's breaking wifi for a lot of people.
teh roxxorz said:
I'm not using the kernel, but from what I have heard, it's breaking wifi for a lot of people.
Click to expand...
Click to collapse
Luckily I did a nandroid backup before flashing the kernel. Would this restore the other kernel?
ss12108 said:
Luckily I did a nandroid backup before flashing the kernel. Would this restore the other kernel?
Click to expand...
Click to collapse
yes it should definitely restore everything.
linsalata28 said:
yes it should definitely restore everything.
Click to expand...
Click to collapse
Yep I see that for myself now haha. I am too curious now...I am going to try the kernel from this post, then I'll give up for a while:
http://forum.xda-developers.com/showpost.php?p=14402741&postcount=2352
ss12108 said:
Is your wifi working? I'm frustrated because I finally got this rom fixed up for everyday use, the new radios were working great, and my LAST task to update the kernel fixed the brightness, but made my wifi crap out.
Click to expand...
Click to collapse
Yeah, mine is working just fine. It hasn't crashed on me at all. Everything is working 10x better. Battery life has been amazing, too.
ss12108 said:
Did you update to the 2.15 PRI? I know the 1.90 was quirky with newer baseband versions and was causing wakelock. I went with 2.15 today and also update the radio to 05.02, and I'm not getting any wakelock.
Click to expand...
Click to collapse
I did the full package. The I just went back to my trusty 1.77.
dcyouknow said:
Yeah, mine is working just fine. It hasn't crashed on me at all. Everything is working 10x better. Battery life has been amazing, too.
Click to expand...
Click to collapse
I just flashed the non-stock version of the kernel (http://forum.xda-developers.com/showpost.php?p=14402741&postcount=2352) and now the brightness is fixed AND the wifi is not broken!
Thanks linsalata28 for pointing me in the right direction!
I'm running Slim Bean 3.1.0 on my SGS3. Recently, I've been trying to flash the AGAT and KT747 kernels on my phone, but with no success.
I've tried flashing kernel,wipe cache/dalvik, rebooting, and then installing the Slim Rom file over it.
Anyone have an idea what I'm doing wrong?
grainyrice said:
I'm running Slim Bean 3.1.0 on my SGS3. Recently, I've been trying to flash the AGAT and KT747 kernels on my phone, but with no success.
I've tried flashing kernel,wipe cache/dalvik, rebooting, and then installing the Slim Rom file over it.
Anyone have an idea what I'm doing wrong?
Click to expand...
Click to collapse
98% Sure you are trying to mix an AOSP based ROM with a TW (Stock) type Kernel. That doesn't typically work. There is an option for the AOSP version of Ktoonsez kernel though that _should_ be a better fit with that ROM.
Have fun and continue to read up *Grin*
The thing is, I'm almost positive I downloaded the AOSP version for the KT747 kernel
grainyrice said:
The thing is, I'm almost positive I downloaded the AOSP version for the KT747 kernel
Click to expand...
Click to collapse
That's a good start, the AGAT says LJ7 based in the Post, leading one to believe it is for TW ROMS. And on the Ktoonsez it does have a download link for either TW or AOSP. One you are looking for should be named "KT747-Kernel-AOSP-JB-SPR-12-11-2012.zip". Verify that and speak up again if you are still having issues.
Yes, I'm certain that was the file I flashed, because I remembered noting that the file was 7.72MB prior to downloading.
Also, I'm sure that the Slim Rom is compatible with the KT747 kernel because several posts were made on the thread saying that
the battery life was amazing, which made me wonder if I was doing something wrong.
grainyrice said:
Yes, I'm certain that was the file I flashed, because I remembered noting that the file was 7.72MB prior to downloading.
Also, I'm sure that the Slim Rom is compatible with the KT747 kernel because several posts were made on the thread saying that
the battery life was amazing, which made me wonder if I was doing something wrong.
Click to expand...
Click to collapse
Reading your original post, The order should go 1) ROM then 2) Kernel ... Then Wiping Cache and Dalvik-Cache (And other wipes if needed). Reason for this is if you flash the Kernel first, then the Rom you are over writing the custom Kernel with whatever is packaged with the ROM.
That is the only other obvious thing I see at this point. Hope that helps..
Did you flash the kernel fix that slim says you need to flash in order to run another kernel? Guess you didn't...
Sent from my SPH-L710 using xda app-developers app
pastert33 said:
Did you flash the kernel fix that slim says you need to flash in order to run another kernel? Guess you didn't...
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
See that now, thanks and sorry for the inconvenience.
Please report back on how you like it, and if you really notice any differences.
It dropped 1% in approximately 30 minutes, half of the time the screen was just on, other half I left it on my desk (all while connected to Wifi).
My settings are 96/1998 on ktoonservative.
In my opinion, so far its amazing as compared to other AOSP roms I've tried.
hi guys! i've got the same problem, can't change the kernel in my i9300.. could you please tell me where i can find the kernel fix that you mentioned above?? Thanks!
panoramix30 said:
hi guys! i've got the same problem, can't change the kernel in my i9300.. could you please tell me where i can find the kernel fix that you mentioned above?? Thanks!
Click to expand...
Click to collapse
If your using the I9300, i would check the thread for that phone. Otherwise you risk bricking it flashing something from this one.. This is for the US Variant SPH-L710.
Go here for all the I9300 stuff, Please save yourself a bricked phone. Thanks! http://forum.xda-developers.com/forumdisplay.php?f=1563
Will do, thank you!
Sent from my GT-I9300 using xda app-developers app
Like the title says, I'm tired of the 4.0.4 TW or JB ROMs, I want to go back to something reliable and smooth. Any suggestions on the best cm9/9.1 ROMs?
I'm downloading the CM 9.1 ROM with their stock kernel, so please let me know what's the best out there for ICS.
Thanks
Any reason you want to stay with CM9? I was running the latest CM10 nightly and it was fast/stable and got great battery life.
mr_malina said:
Any reason you want to stay with CM9? I was running the latest CM10 nightly and it was fast/stable and got great battery life.
Click to expand...
Click to collapse
Call echo is a big issue, also there isn't a completely stable release of JB out yet.
stevew84 said:
Call echo is a big issue, also there isn't a completely stable release of JB out yet.
Click to expand...
Click to collapse
Did you have noise suppression enabled? I had had call quality issues until I did that.
mr_malina said:
Did you have noise suppression enabled? I had had call quality issues until I did that.
Click to expand...
Click to collapse
Check with most dev's they'll almost all tell you that the echo on JB builds is due to the kernel. 4.1.2, 4.2, and the TW version of 4.1.2 all suffer from the echo, some DEVICES themselves don't have the problem.
I've had no problem with call echo on JB 4.2.2 I always use an older CWM non touch version and use darkside super wipe and darkside cache cleaner. Tried using touch CWM recovery and had an issue. I live by CWM 5.0.2.7 non-touch. :thumbup: :thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
MrBeatnut said:
I've had no problem with call echo on JB 4.2.2 I always use an older CWM non touch version and use darkside super wipe and darkside cache cleaner. Tried using touch CWM recovery and had an issue. I live by CWM 5.0.2.7 non-touch. :thumbup: :thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
It's a hardware issue. Recovery version and flashing procedures do not matter.
me_is_rushin said:
It's a hardware issue. Recovery version and flashing procedures do not matter.
Click to expand...
Click to collapse
And I'm one of the unlucky who have the newest GS2, the gray one, and I have an echo or as my gf calls it "underwater sound' with any and all CM or other 4.1+ ROM.
stevew84 said:
And I'm one of the unlucky who have the newest GS2, the gray one, and I have an echo or as my gf calls it "underwater sound' with any and all CM or other 4.1+ ROM.
Click to expand...
Click to collapse
If your T989 (Titanium, its the official color name) is having problems you might wanna look into the official ported release of Touchwiz 4.1.2. It is a superlite ROM made by vincom. I haven't tried it out but before you permanently revert to CM9 you could try it out and see if it fixes your problem.
I use cm10 build 6, can I go ahead and pick a kernel to flash over the stock cm kernel?
Well the kernel you want must be compatible with the rom you are using and your device. For example if you are on CM10 you must flash kernels built for CM10/jelly bean. Otherwise you will get boot loops.
There might be some kernels for CM10 in the development section of Galaxy wonder.
Sent from my GT-I8150 using xda app-developers app
If kernel is for your Custom ROM that you have, you obv can.
flash the kernel that is exactly for ur ROM
kernel that is for CM10
kernel that is for CM9
dadat0 said:
I use cm10 build 6, can I go ahead and pick a kernel to flash over the stock cm kernel?
Click to expand...
Click to collapse
It's better to stay with the same Kernel, from my point of view, I guess if you shared with us why do you wanna change the Kernel, there might be a solution for your problem, a friend of mine Flashed a different kernel and it was supposed to be compatible, but still he had problems and he flashed everything back again.
I wanted to use other governors. Btw I flashed a new kernel and it seems fine as of now
dadat0 said:
I wanted to use other governors. Btw I flashed a new kernel and it seems fine as of now
Click to expand...
Click to collapse
Good for you, as long as everything is working smoothly, then good luck with the new Kernel:good:
is it really just limited by CM9/CM10? Like if I am using acro's cm9 RC6 and the kernel was released after RC7 was released, maybe some of the extra features in RC7 causes a slightly different coding for the kernel which of course may cause problems if you use it on RC6?
also i suppose there's no need for clearing data/cache, fixing permission etc when flashing kernel right?
sorry if I'm not supposed to ask questions in a question. I just feel this is relevant to the title and i feel that it is better when people can just read this post and learn more about kernels. The list of how-tos in the dev section has not much details on kernels
egagah said:
is it really just limited by CM9/CM10? Like if I am using acro's cm9 RC6 and the kernel was released after RC7 was released, maybe some of the extra features in RC7 causes a slightly different coding for the kernel which of course may cause problems if you use it on RC6?
also i suppose there's no need for clearing data/cache, fixing permission etc when flashing kernel right?
sorry if I'm not supposed to ask questions in a question. I just feel this is relevant to the title and i feel that it is better when people can just read this post and learn more about kernels. The list of how-tos in the dev section has not much details on kernels
Click to expand...
Click to collapse
Nope no problem at all. You can even flash R7 kernel on every previous version of arco cm. as long it is for the same android version
No need to do that. But just to play everything save it is better to do wipe cache and dalvik no need to wipe data
Sent from my HTC Sensation using xda premium
reddvilzz said:
Nope no problem at all. You can even flash R7 kernel on every previous version of arco cm. as long it is for the same android version
No need to do that. But just to play everything save it is better to do wipe cache and dalvik no need to wipe data
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
just adding on to your post, i've tried flashing hurtsky's 2.2 fixed without wiping anything, not a single problem =)
egagah said:
just adding on to your post, i've tried flashing hurtsky's 2.2 fixed without wiping anything, not a single problem =)
Click to expand...
Click to collapse
I don't say you "must" i just said to play it save. Is it too much if we try prevent something from happening better than facing it?
Not all phone are the same as your's sir. Sometimes other phone need to do that so that there aren't any problems with it.
Sent from my HTC Sensation using Xparent Green Tapatalk 2
Installed CyanogenMod 10, works very nice....but now no service and it shows my phone as a Galaxy Nexus. Please help.
nacraracer said:
Installed CyanogenMod 10, works very nice....but now no service and it shows my phone as a Galaxy Nexus. Please help.
Click to expand...
Click to collapse
Where did you get the rom?
gtdtm said:
Where did you get the rom?
Click to expand...
Click to collapse
http://www.youtube.com/redirect?q=h...D1u_dHgBUp1MdI7B8MTM3MDYyNjI3NkAxMzcwNTM5ODc2
That was build four. Build three does the same thing but it calls my phone a DIC2
nacraracer said:
http://www.youtube.com/redirect?q=h...D1u_dHgBUp1MdI7B8MTM3MDYyNjI3NkAxMzcwNTM5ODc2
That was build four. Build three does the same thing but it calls my phone a DIC2
Click to expand...
Click to collapse
Are you on Verizon? If so, you'll have to change your network mode. That rom has GSM by default I believe.
gtdtm said:
Are you on Verizon? If so, you'll have to change your network mode. That rom has GSM by default I believe.
Click to expand...
Click to collapse
Tried that. Ended up going back with a stock ROM to get the radio to wok again. But I sure would like to install a much newer stable ROM. Any suggestions?
nacraracer said:
Tried that. Ended up going back with a stock ROM to get the radio to wok again. But I sure would like to install a much newer stable ROM. Any suggestions?
Click to expand...
Click to collapse
Try Chilly's pacman rom. It has CM10 plus a lot more. It's quite stable. I think you'll want the 4-20 version.
Try chilly's cm10 rom its the one im using and its the most stable of all his jellybean roms. Use aero's v15 ics kernel too and use smoothass govenor andcset ur min and max 2 higer than the original and clear ur dalvik cache using android tweaker 2 every now and again to avoid lagging and boot loops. Ive been on it or awhile using those settings and tweaks and it works great on cdma.