Hi guys I have a problem with gio's accelerometer, i found out about this in a game: by entering *#0*# and going to sensor I noticed: while the phone is lying down still on a level surface with no vibrations accelerometer data is changing and it never stops. It is not important in normal use but in some apps and games this is realy a problem.
So any solution?
ok ...removed.!!!
Try to go Settings->Display->Horizontal calibration
Or try to change the ingame titl sensivity
On my phone accelerometer data also chanching but really a little bit.
Amir6723 said:
another usless forum...
Click to expand...
Click to collapse
Demanding much?
You come on a volunteer, community-based forum and complain because you haven't been answered within two days?
What troubleshooting and testing have you done?
Is it on all axis?
Does toggling the different radio have an effect?
There could very well be issues with your Gio alone.
This could also be a problem with a driver for which we don't have a source to look at.
Amir6723 said:
another ...
Click to expand...
Click to collapse
sorry to say that,I had a bad day.
well yes. I tried anything and it is the same.
I wonder if this is because of hardware.
even in htc hero accelerometer works better than this.
Related
Or gyro stabilized camera.
My train of thought might be too naive; (phone has gyroscope, phone has camera, why not!) but really is it something possible to give to our DHDs? A videocamera with which no matter how the phone was rotated, the horizon in the recorded video will always stay horizontal. They got used in MotoGP.
Here's a video example for anyone unfamiliar with them - skip to 40seconds in
motogp.com/en/videos/2010/Rossi+debuts+Gyroscopic+OnBoard+camera
Anyone got any idea? Or maybe I should actuallt ask in general android apps.
It wouldnt be impossible but it would take quite a lot of processing power and would take a lot of time to make. And I'm not sure if anybody has that sort of time.
You sure the phone has a gyroscope? Your not confusing it with the accelerometer are you?
YdLeet said:
Need post count, sorry!
Click to expand...
Click to collapse
And that isn't the correct way to build it either.
Oh ok, thanks a lot. That provided some food for Googling on these things.
Silly marketing got me again; so a g-sensor is actually an accelerometer which is different from a gyroscope and not as accurate at measuring movement (tilt/pitch in specific). DHD has accelerometer only while iPhone 4 and upcoming Sensation are also equipped with a gyroscope (or gyro-sensor).
hi
how are you all
please help me fixing my phone sensors it was good but after flashing android the left sensor still good but the right sensor stop working (i am on bada 2.0)
thanks a lot
Which sensors?
Adrian.
SGS2 9100
Lite'nin rom
XDA Pro.
inkyadrian said:
Which sensors?
Adrian.
SGS2 9100
Lite'nin rom
XDA Pro.
Click to expand...
Click to collapse
g sensors (rotation sensors)
yeah i have same ur problem
we want a sloution
I read the forum. I'm on Android. I don't know the Bada system but if the operating system does the same thing, then you may have somewhere, the option to calibrate the sensors in the settings option. Any more than this, I would opt to go back to your original os, until you've found out where to go on this forum.
Adrian
Sent from my GT-I9100 using XDA Premium App
How did you notice that? Maybe it's a bada 2.0 Bug...
Did you tried to flash Android on Bada 2?
Did you removed Android before flashing bada 2.0?
That is Android's fault and mainly user's fault also
Devs stated that sensors doesn't work in Android though you find people trying to calibrate them
WTH is the user doing by calibrating the sensors in Android ????
bada sensors calibration is screwed up
for motion sensor calibration try to put your phone on a horizontal floor and calibrate it with this code *#66225*#
for other sensors i don't know what you should do
Best Regards
Did you removed Android before flashing bada 2.0?
Click to expand...
Click to collapse
man the proplem its not from bada 2.0 , its from android , i had the problem befor i flashed to 2.0( iwas 1.2) !
_________________
محمد اش كاعد تسوي هنا
مافي غير هالحل ؟؟؟
hhhhhhhhhhhhhhhhh
fiqar you registered here too!
i don't have another solution
let's see if someone else will find a solution for you
good to see you here
Best Regards
Perhaps you could find a better Bada forum?
Adrian.
Rom-Lite'nin 4.1
Browser-Xscope
Call recorder- Total Recall
abd-hamdan said:
hi
how are you all
please help me fixing my phone sensors it was good but after flashing android the left sensor still good but the right sensor stop working (i am on bada 2.0)
thanks a lot
Click to expand...
Click to collapse
this is for you to learn to never do anything stupid and put Android Froyo = crazy, its crazy nerds, the solution to be hererogram ''bLevel'' samsung apps utilitys by SIDI
.... and good luck
*#66225*# Motion Calibration..Try this code and keep your phone on a flat surface liek a table or a flat floor for about a minute while following this procedure!
I recently had an issue regarding the proximity sensor on my DHD and I tried many different ROMs and calibration apps but none of them worked. Seems like the problem is the dirt that blocks the way of the sensor. I cleaned the grill from the dirt and everything is now OK. Hope I helped someone.
todorovke said:
I recently had an issue regarding the proximity sensor on my DHD and I tried many different ROMs and calibration apps but none of them worked. Seems like the problem is the dirt that blocks the way of the sensor. I cleaned the grill from the dirt and everything is now OK. Hope I helped someone.
Click to expand...
Click to collapse
Dirt kills proximity sensors
Sent from my Desire S using xda app-developers app
Absolutely
totalnoob34 said:
Dirt kills proximity sensors
Sent from my Desire S using xda app-developers app
Click to expand...
Click to collapse
Took me a long time to discover it
proximity re - calibrator
todorovke said:
Took me a long time to discover it
Click to expand...
Click to collapse
Hi have you tested the proximity calibrator app?
Setup of proximity sensor isnt the main goal of roms...
Look at this thread http://forum.xda-developers.com/showthread.php?t=951858
Set values, test it if the sensor shows "near" or "far" or adjust it more.
My DHD needs LOW = 2; HIGH = 3; and it works...
oh , and in Cyanogenmod 11 by mustaavalkosta, its already installed i think.
Lugke said:
Hi have you tested the proximity calibrator app?
Setup of proximity sensor isnt the main goal of roms...
Look at this thread http://forum.xda-developers.com/showthread.php?t=951858
Set values, test it if the sensor shows "near" or "far" or adjust it more.
My DHD needs LOW = 2; HIGH = 3; and it works...
oh , and in Cyanogenmod 11 by mustaavalkosta, its already installed i think.
Click to expand...
Click to collapse
Yep spot on. CM11 comes with it.
Low 3 and High 5 works best for me.
Lugke said:
Hi have you tested the proximity calibrator app?
Click to expand...
Click to collapse
I think you missed the point. The entire idea of his post was to let you know that his issue was dirt in front of the sensor.
tlund said:
I think you missed the point. The entire idea of his post was to let you know that his issue was dirt in front of the sensor.
Click to expand...
Click to collapse
That's what I had to do in the end as well. Remember that these phones first came out in Oct. 2010 (when I got mine ....!!) so plenty of time for dirt to build up. Check the Proximity Sensor thread for links on disassembly but I followed this site ... http://www.beardeddonkey.com/home/comments.php?y=12&m=04&entry=entry120428-040327 ... to take mine apart. Not all of it, just far enough to clean out the PS. All good after that.
thanks for the tip
i need clean my sensor
thanks man !! been modifying thresholds using Proximity Recalibrator forever with no avail ... i don't know how i forgot about cleaning the sensors :silly: :silly: you made my day !! thank you a bunch !!!!
That easy..?
omnismart said:
thanks for the tip
i need clean my sensor
Click to expand...
Click to collapse
... and that's it at the end?
Just clean the sensor and everything works fine ?
Hi, when i play games that use the accelerometer the accelerometer dont woks well.
I calibrate it on Advanced Ace2 Settings.
But still dont woks well.
I use 2 roms, and the same thing.
You know what i have to do?
sorry for bad english
Try to describe it little more, what is wrong with it? Some new roms have problems with it, sometimes I have to calibrate it, than I have to use default settings, otherwise the screen is rotated to landscape even when it should not.
DOGEEE said:
Hi, when i play games that use the accelerometer the accelerometer dont woks well.
I calibrate it on Advanced Ace2 Settings.
But still dont woks well.
I use 2 roms, and the same thing.
You know what i have to do?
sorry for bad english
Click to expand...
Click to collapse
i thing your accelerometer is broken :/
Is anyone else's 5t pretty sensitive and auto rotates at times you don't want it to just by a small movement?
So this is still driving me crazy, small movements continue to make the screen auto-rotate when trying to do something. Is there any way to calibrate the accelerometer?
Any answer for this?
AtoZ0to9 said:
Any answer for this?
Click to expand...
Click to collapse
Don't rotate it ?
AtoZ0to9 said:
Any answer for this?
Click to expand...
Click to collapse
this was allways an issue to me on all oneplus devices. Theycan fix this problem by simply raising the rotation trigger treshold. but i guess there are not venough complains. it should be possible with root too but i dont know exactly what file/line to modify.
Yep, I have locked mine to portrait mode which seems to be fine for me 90% of the time for me. I do hope they fix this though..
AtoZ0to9 said:
Is anyone else's 5t pretty sensitive and auto rotates at times you don't want it to just by a small movement?
Click to expand...
Click to collapse
+100 but unfortunately seems most of the people (including oneplus) don't care.
Yep. I had a thread on this when it first came out.
I wish I could find an app that worked well enough to let me just pick and choose what I want to auto-rotate, but they all are a little flaky.
I've locked it to portrait. This is an OOS issue or all ROMs? Haven't dabbled with any custom ROMs yet, but if it can't fix this annoying issue, I'm all for it.
Had this on all the Nexus ROMs as well....always on portrait does it for me.
Just saw this in the articles section.
https://www.xda-developers.com/rotation-orientation-manager/
Could be worth a try.