Tilt 2 wont power up - Touch Pro2, Tilt 2 Windows Mobile General

this morning i replace my touch screen digitizer and lcd now my phone wont power on, at all the orange light comes on when its chargeing but wont power on need help please all the screens are brand new

You're sure that everything got hooked back up correctly?
The ribbon cables can sometimes be quite painful. I would also ensure the power button is connected correctly...

Related

Replaced broken glass now phone won't power up

The phone is DInc CMDA Verizon completely stock with the most recent OTA update.
I replaced the front glass on my wife's phone after she dropped it. The phone was working fine, but the glass was beginning to shard out so I replaced it. Now the phone won't power on. All it will do is:
Illuminate the red light by the Verizon Logo if I put in the battery and plug in the charger
Make one short buzz when I press the power button (which also extinguishes the red light.)
I stripped the phone back down and re-seated all the cables and the result is the same. Any thoughts or suggestions?
Thanks.
Finally! Phone powers up, but the screen doesn't? How to get to media?
Well, the phone must have just need charging, because the LED has switched to green and it powers up ( I can get the soft keys to light up and occasionally the max volume sound will play if I spam the volume up key, but there is still no image on the LCD.
Is there any way to get to my data & pics on the phone?
The_B1G_JBZy said:
The phone is DInc CMDA Verizon completely stock with the most recent OTA update.
I replaced the front glass on my wife's phone after she dropped it. The phone was working fine, but the glass was beginning to shard out so I replaced it. Now the phone won't power on. All it will do is:
Illuminate the red light by the Verizon Logo if I put in the battery and plug in the charger
Make one short buzz when I press the power button (which also extinguishes the red light.)
I stripped the phone back down and re-seated all the cables and the result is the same. Any thoughts or suggestions?
Thanks.
Click to expand...
Click to collapse

One X solid red light after (attempt to) repair

I dropped my HOX and I got another HOX with working mainboard. I replaced it and everything worked except for very faint backlight and flickering. So I disassembled the phone and put it back together again. Now I can't start the phone anymore and the solid red led burns when connected to the charger....after I connect it it flickers one time, very fast. Does anyone have an idea what it could be? So pissed of right now...
Hi, if you don't have any power at all eg no vibration or lights on three bottons at the bottom, it could be that the power connecter is not properly plugged in. follow cabble down from power button, plug is hard to get at unless you unstick power button from cassie.
If you have some power check lcd is working by using a bright light near the screen and closely checking to see if you can see anything, could be backlight not working.
just my 2cents
feel bad for ya!
bevan1971 said:
Hi, if you don't have any power at all eg no vibration or lights on three bottons at the bottom, it could be that the power connecter is not properly plugged in. follow cabble down from power button, plug is hard to get at unless you unstick power button from cassie.
If you have some power check lcd is working by using a bright light near the screen and closely checking to see if you can see anything, could be backlight not working.
just my 2cents
feel bad for ya!
Click to expand...
Click to collapse
The cable is connected and I'm afraid the display shows nothing Thanks for your reply.
This might work
_JT said:
I dropped my HOX and I got another HOX with working mainboard. I replaced it and everything worked except for very faint backlight and flickering. So I disassembled the phone and put it back together again. Now I can't start the phone anymore and the solid red led burns when connected to the charger....after I connect it it flickers one time, very fast. Does anyone have an idea what it could be? So pissed of right now...
Click to expand...
Click to collapse
Okay, I have experienced the same thing and I'll tell you what I did to fix it. I dropped my HOX after owning for only a few days and the screen was cracked. I ordered a replacement LCD/ screen digitizer part and took it apart. One of the things that I found was that there was adhesive everywhere, including adhesive on the connection to the battery.
After it was taken apart, I attempted to test the new screen. It was then the LED turned solid red and the phone would not power on (even after 10 minutes of charging). What I did was remove the adhesive from he battery connector and disconnected the battery completely. I plugged it back in 10 seconds later and it turned back to flashing green (which is normal because I had several missed texts).
So my solution was just to unplug the battery and it worked just fine. The hardest part about this whole process was putting the cover back on, especially on the side with volume buttons! Hope that helps.
I have exactly the same problem. The difference is that now that I took it off charge, the red light is flickering on and off. I cannot get the display to show! Please please help.

Replacement LCD problems

Hi,
So I dropped my UK one X the other day, the fall was so bad the LCD popped from the frame and tore the ribbon cable for the LCD.
Now, I've ordered the replacement screen and after a strip down and rebuild which lead to removing the battery the new screen is now blank (phone charges and seems to power on)
After doing a quick search on this it is all pointing around syncing the screens - which I cannot do due to the broken ribbon cable on the old...
Any ideas how I can get this working without the syncing process?
It is rooted with a custom rom if that helps.
Thanks, Matt
Anyone? Kinda desperate.
I had blackscreen problem in recovery.
http://forum.xda-developers.com/showthread.php?t=2098940
But u cant see anything?
Also that thinn cabel from lcd in that clips gave me some problem.
This wasnt soo mutch help to u i think
I don't think that is the problem I have.
The phone does turn on as the light light up and it vibrates as if I'm trying to unlock it.
Its just the LCD is not powering up at all - Tried the cable reseating many times =(
maattttyy said:
I don't think that is the problem I have.
The phone does turn on as the light light up and it vibrates as if I'm trying to unlock it.
Its just the LCD is not powering up at all - Tried the cable reseating many times =(
Click to expand...
Click to collapse
Have you found solution to this problem?
What is with my HOX is, yesterday i bought (lcd+glass) the whole display it turned yesterday on as i plugged the power cable in, today it isnt working anymore, screen wont turn on, when i try to turn on the phone those three buttons at the bottom flash for a few seconds and nothing happens, the phone is turning on nad everything but i cant get that screen to work i have checked cables. Please any help is appreciated.

Broke screen and no power any help?

OK so my phone screen got smashed up prertty good...so i got a new screen and replaced it and checked thoroughly to be sure it was installed properly which i did ..BUT device will not power on at all nor will it show led when plugged into charger...i should also add that it did not power on or show charger led after screen broke. would anyone know what part may be damaged to cause this? I did disassemble whole phone and didnt notice any physical damage..circuitry etc...tried a a couple different batteries and chargers also..any help would be appreciated thx

Did I brick my device during a battery replacement?

Does the order in which you plug back in the battery matter? I plugged the battery cable in, then the interconnect cable. I broke the digitizer during the replacement, so I have no way of seeing if it actually boots. When I hold the power button to turn it on, it vibrates a little, so I know it is turning on, but if I wait 5 seconds and try it again, it seems to boot again. Does this mean the phone can't boot anymore? I have also tried plugging in a usb c to hdmi adapter to view the screen on a monitor, but no luck.
I had the same problem, I endup buying up new screen which didn't fix the issue. I had bad screen and mainboard. you can take it to store and have him plugged the good screen to see if its booting up, if its then you can buy the screen if its not then its not worth it to get both replaced

Categories

Resources