I have the BT800 and so far my experience with it is pretty negative.
Other than the fact that it just doesn't sit will on my ear, all the people that I have phone conversations with tell me that my voice keeps cutting off every couple of seconds. They have a hard time understanding what I'm saying.
Anybody else have this behaviour? Which BT headset do you guys recommend?
I am also looking for recommendations for a new BT headset, but let me also contribute with what I had (lost it now).
I had the Bluespoon AX. It was by far the most comfortable thing I have ever put in my ear. It is so small and light and comfortable, that you almost forget it is in there, and at the end of the day, you find it in your ear by accident sometimes.
That said, when I lost it I did not shed a tear. Using it with Universal was quite painful. The sound would crackle if the AX and the Universal were on different sides of my body. Not a distance issue, but somehow an interference from my body in between.
The AX is useless in any environment there is noise and/or wind. I suppose they could not use a directional mic because the mic is so far away from your mouth (practically *in* your ear). It worked fine when I was sitting in a quiet place though, but then...
With the Universal, only the handsfree profile is available. While this worked fine for outgoing calls (can make voice dial calls and all), for some reason on incoming calls, when the AX is active, Universal would not ring. The only call indicator is on the AX and if you don't happen to be wearing it at the time, you will miss the call.
I have been reading up on other models. The AX2 apparently has better reception, but I am not sure about noise and the BT software problems.
The digital model has noise cancelling, but it is way too expensive to buy it on faith alone.
Motorola H500
atekant said:
I am also looking for recommendations for a new BT headset......
Using it with Universal was quite painful. The sound would crackle if the AX and the Universal were on different sides of my body. Not a distance issue, but somehow an interference from my body in between.
Click to expand...
Click to collapse
Same problem with my Motorola H500... anyone any ideas how to avoid this apart from buying another model
I have HBH 662 (Sony Erricson). Its very tiny, formerly it did not fit easily in my ear, but now I used to it, though I do not like to have it on all day long. The sound quality is too low/not loud enough though I set to the highest volume already. The battery life is not good, it barely survives my every day calls, I'm not a super call person, just average.
Things that really annoying:
- The Caller ID display is too small to read and it only shows the first half of the caller's number then scroll the remaining digits.
IT DOES NOT show the caller's name. Have been patiently enough to wait for this to be fixed by MS/imate/other vendor whatsoever. If anybody has a workaround, PLS.. PLS... PLS... share....
- The ringer is very low and intended to tell you there is a call if you have it on your ear. Does not have a vibrate function. If the Universal is in silent mode, most likely I cannot tell when there is an incoming call.
I have HBH 662 (Sony Erricson). Its very tiny, formerly it did not fit easily in my ear, but now I used to it, though I do not like to have it on all day long. The sound quality is too low/not loud enough though I set to the highest volume already. The battery life is not good, it barely survives my every day calls, I'm not a super call person, just average.
Things that really annoying:
- The Caller ID display is too small to read and it only shows the first half of the caller's number then scroll the remaining digits.
IT DOES NOT show the caller's name. Have been patiently enough to wait for this to be fixed by MS/imate/other vendor whatsoever. If anybody has a workaround, PLS.. PLS... PLS... share....
- The ringer is very low and intended to tell you there is a call if you have it on your ear. Does not have a vibrate function. If the Universal is in silent mode, most likely I cannot tell when there is an incoming call.
Bt Headsets
I am using the Bluestreak G2 headset which seems to work O.K. and Has About 8 hours of use. Background noise is acceptable but it doesn't seem to do noise cancellation.
Have noticed that if WIFI is active with BT the headset drops out a little. Seems O.K. If Wifi is off & BT is on. Not ideal if you want to use Skype with BT.
Have tried the following with my Exec:
- Tekkeon ET3000 (with display like the BT800 but better), great battery life, good volume, okay quality sound, okay comfort, no problem with call transfers from the Exec
- SE HBH-608, fantastic battery life, very comfortable, good quality sound, very comfortable, okay volume (seems limted by the Exec)
- Jabra BT800, okay battery life, okay comfort, good sound quality, okay volume, seems a bit slow transferring calls between the headset and the Exec
Have you tried putting the names/numbers also on the SIM Card?! I read somewhere that headset profile is using the SIM Card's phonebook...
lie_ui said:
- The Caller ID display is too small to read and it only shows the first half of the caller's number then scroll the remaining digits.
IT DOES NOT show the caller's name. Have been patiently enough to wait for this to be fixed by MS/imate/other vendor whatsoever. If anybody has a workaround, PLS.. PLS... PLS... share....
-
Click to expand...
Click to collapse
No, it does not work either, even though the contact name is saved in the SIM card. Have been searching for workaround/solution but have not found any good answer yet.
globalsat
I have the Globalsat gps338 ,and it works very well ,use with gpstuner ,and teletype gps software which is slow to update on the Mda pro but the bluetooth gps pair well with the program and with 9 satellites showing indoor .Any Sirf III chipset will be ok.The only thing that does not work in the universal is the gpsinfo program that comes with the gps338.
Anyone with the gps338 ? works well with mapapolis too.
gagis said:
I have the BT800 and so far my experience with it is pretty negative.
Other than the fact that it just doesn't sit will on my ear, all the people that I have phone conversations with tell me that my voice keeps cutting off every couple of seconds. They have a hard time understanding what I'm saying.
Anybody else have this behaviour? Which BT headset do you guys recommend?
Click to expand...
Click to collapse
You mean the Jabra?
Update the Firmware - there's a patch available on Jabra.com - I did thsi recently and it's a big improvement. Even my wife can hear me properly now.
(not sure if that's a good thing or not to be honest.....)
Re: Motorola H500
philtech44 said:
atekant said:
I am also looking for recommendations for a new BT headset......
Using it with Universal was quite painful. The sound would crackle if the AX and the Universal were on different sides of my body. Not a distance issue, but somehow an interference from my body in between.
Click to expand...
Click to collapse
Same problem with my Motorola H500... anyone any ideas how to avoid this apart from buying another model
Click to expand...
Click to collapse
what, like carrying the phone on the same side of your body as the headset??
(Like it says to do in the instructions... )
Thx Riceburner!
figures! I've been checking the Jabra site for an update repeatedly but of course as luck will have it, as soon as I stopped looking...there it is.
I will update my BT800 tonight and see what happens. Tell me, did you have the same problems? Voice kept cutting off? All around bad performance from this headset?
thx.
motorola H700, great audio, great look, light and good batteries and......................same mini USB charger
Well...no improvements.
I updated the firmware on my Jabra BT800 and although I noticed an improvement in the time it takes to transfer the call to the headset, I still have the same problem with my voice cutting off.
I tested it repeatedly by making more than one phone call and the result was always the same. While I'm speaking, the person on the other end says that my voice keeps cutting off. Therefore beginning or end of words are totally cut off. Very frustrating to have a conversation when the person on the other end keeps saying "what?".
If nobody else is having this problem with the BT800 and the Universal, then I guess I got stuck with a faulty headset?
i have the hbh 662 sony. not impressed with it to be honest. unless i am less than 1/2 metre from it, the quality of the line deteriorates alarmingly. I was hoping to be able to stick it on the kitchen table and then walk around having a phone call. I can't do this.
Also had ideas for having the universal in my pocket, and using the headset almost as a standalone phone. This doesn't work that well either. tried the headset with a orange c500 , and it was so much better.
also upgraded to the latest radio update (1.04.02). this didnt do anything for the quality of the line either.
is it the universal or the sh1te ms bluetooth stack? how does the jabra bt 800 compare?
(i have the orange m5000 with a qtek rom)
Nextlink Bluespoon AX2
Hi there,
using Bluespoon AX2 with my universal(MDA pro) with NO compromises.
Have a cabrio and even driving the car sound quality is good.
You can pair EIGHT devices on this headset simoultanesly and supports Bluetoth1.2
Good stuff for 60€
...and by the way...it is SMALL and easy to put on as you can put it IN your ear not around
Plantronics
Hi
I have Plantronics and I'm happy about this 8 grams headset.
Ciao[/b]
hi everybody.I want to buy a headset for my mda pro with qtek rom(radio 1.13).
I'd like to spent about 50 euros.Any suggest?
nobody can help me?
I've had pretty bad luck across the board with several bluetooth headsets I've tried through the years. Always seemed dependent on phone I was using, had to have it within like 2 feet of the phone for a solid connection...and even with solid connection voice quality was always poor, complaints on both ends. Between cell call quality never being exactly HD, adding in the poor bluetooth compression other companies were using was just too much. One in four words I wouldn't be able to understand, and between the extra noise the mic would pick up (in spite of all having "dual mics with proprietary noise cancelling algorithm!!!!111") the other person would have trouble understanding me. So I had to take care not to speak too fast, speak slowly, clearly. Far too much trouble.
This is the first headset I haven't had any of those problems with. I couldn't be happier. I regularly ask people how I sound and they say "great"; and the other line always comes through loud and clear.
I'm not sure if it's similar bluetooth stack implementation, and I haven't tested this with other phones; but with the Nexus 5 it's fantastic sound quality, noise cancelling, solid connection (even from pocket I want to say but I usually give bluetooth the 3 feet and line of sight regardless when on phone).
It's the LG HBM-235, linked below
ok I'm trying to link it but I might be spamming. Will update after more posts. You can find it on Amazon.
Hope you guys like it too!
Lg tones 730 + viper audio
When I use earphones without built-in microphones to make phone calls (using the phone's own mic) in noisy environments such as cars or cafes, the people on the other side either cannot hear me or the volume is very low. I can hear them just fine. If I take the earphones out of the phone, people tell me my voice suddenly becomes very clear.
Has anybody experienced this? Why would the call quality change on the other side depending on whether an earphone has been plugged in? Maybe something to do with noise cancellation?
FYI, my m8 is all stock except for root, custom recovery and exposed installer.
I've done some testing, and I'm seeing some weird behaviors. As far as I can tell, there are two microphones on M8. One in the bottom speaker grill, and another on the back, just above the camera flash. Here are the results:
*The earphone used here doesn't have built in microphone.
1. Normal phone call uses front microphone.
2. Phone call on speakerphone uses back microphone.
3. Phone call with earphones plugged in uses back microphone.
This is all good when you are in a quiet environment. With noise, however, it seems that you have to speak directly to the back microphone if you have earphones plugged in, otherwise your voice gets drowned in noise and gets cut by noise cancellation.
Weird thing is that the built in voice recorder app always uses the front microphone, regardless of whether an earphone is plugged in or not.
Hello everyone!
I'm currently using the standard Apple/iPhone white earbuds as a mic for making calls so I can have my hands free.
A few callers have reported that the call quality sounds poor, echo-y, as if I am using speakerphone to call them. Once I remove the earbuds and hold the phone next to my head to talk to them, they report drastic improvement.
I've tried:
- multiple pairs of Apple earbuds with the same results.
- signal strength is always strong but same results
- different physical locations with the same results
Anybody experiencing the same?
jngnyc said:
Hello everyone!
I'm currently using the standard Apple/iPhone white earbuds as a mic for making calls so I can have my hands free.
A few callers have reported that the call quality sounds poor, echo-y, as if I am using speakerphone to call them. Once I remove the earbuds and hold the phone next to my head to talk to them, they report drastic improvement.
I've tried:
- multiple pairs of Apple earbuds with the same results.
- signal strength is always strong but same results
- different physical locations with the same results
Anybody experiencing the same?
Click to expand...
Click to collapse
I did once. I think I just didn't have the headphones plugged in properly or all the way snapped in. Today I was determined to find a pair that worked well with phone calls and I first tried the apple buds. They worked perfectly and crystal clear. Try a different kind of bud to see if any are working. Stock rom?
Hi,
i have bought apple air pod pro for calling purpose for my note 10+ but its call sound is very low.
In other apps like youtube or facebook netflix etc it is working loud and clear. some time it get louder then one plus usb c wired headphones.
please tell me the way i can make its calling sound louder
(other person can listen to me loud and clearly)
ashishstillthere said:
Hi,
i have bought apple air pod pro for calling purpose for my note 10+ but its call sound is very low.
In other apps like youtube or facebook netflix etc it is working loud and clear. some time it get louder then one plus usb c wired headphones.
please tell me the way i can make its calling sound louder
(other person can listen to me loud and clearly)
Click to expand...
Click to collapse
I think that you may have a defective pair of Airpod Pros. You can also see if there is new firmware. Even though I also have an iPhone, I've never been able to update.
I use them with my Note 10+ as well & even when mowing the lawn on a lawn tractor (very loud) if a call comes in, people on the other end hear me loud & clear & I hear them well too). Before I turn off the mower, I've asked every caller if they can hear me well & they all say yes! I hear music loud & clear with Active Noise cancelation on.
I don't know if this will help the volume but I'd try the tips in this video, can't hurt.
https://youtu.be/MB63r_vRWeI
Even try unpairing & repairing them. I use 2 Android apps. Material Pods & Assistant Trigger. You don't need both and they won't help your problem, just nice Apple-like battery info functionality.
Sent from my SM-N975U using Tapatalk