Develop Bugs

stucked at "Samsung Galaxy Y GT-S5360" post screen

yesterday, I flashed my kernel to Repencis V3 and it works but when I tried to come back with the stocked rom altough CWM completes its restoration but when the phone restarts I just stucked there no "Samsung" boot logo with shiny thing its just stucked there with GT-S5360 post image..
Is there any stocked rom for DXLC1 ? any helps from it? I just new to modding my phone but actual because before I delete the kernel mod I deleted some files off the SD Card then put it back on then apply restores, completes and restarts after that I just forever to see the logo without doing nothing. Any helps thanks!

Yes ..You can find the stock rom for DXLC1 here :
http://forum.xda-developers.com/showthread.php?t=1465800
Click to expand...
Click to collapse
Repencis V3 has a custom kernel..Using Merruk kernel with it is not working..
Just flash with the firmware package above and youre good to go..youll not get your sd card contents deleted so backup them after flashing

hitme987 said:
Yes ..You can find the stock rom for DXLC1 here :
Repencis V3 has a custom kernel..Using Merruk kernel with it is not working..
Just flash with the firmware package above and youre good to go..youll not get your sd card contents deleted so backup them after flashing
Click to expand...
Click to collapse
Thanks but do I still need to use CWM flash to get it back? or just a full stock recovery? I'm a bit afraid what happens next to my phone because when I hold the power to turn it off but still it will automatic starts again without pressing anything and freeze up there and never show up the samsung startup with sound.

Kamijou said:
yesterday, I flashed my kernel to Repencis V3 and it works but when I tried to come back with the stocked rom altough CWM completes its restoration but when the phone restarts I just stucked there no "Samsung" boot logo with shiny thing its just stucked there with GT-S5360 post image..
Is there any stocked rom for DXLC1 ? any helps from it? I just new to modding my phone but actual because before I delete the kernel mod I deleted some files off the SD Card then put it back on then apply restores, completes and restarts after that I just forever to see the logo without doing nothing. Any helps thanks!
Click to expand...
Click to collapse
You need to get back to stock kernel before restoring cuz Repencis has a modified kernel. Find the kernel from Doky's kernel thread and flash it using Odin or using CWM by Mai77's method. You can restore your stock ROM after this.

thanks guys I finally put back my rom to stock I really appreciate your help guys!

No boot animation.

Hey guys,
I tried flashing Franco kernel on my GNex running Foxhound black edition 0.6 yesterday. Strangely, after flashing it, the device refused to boot up.
Luckily I had trinity kernel (which I was initially on) on my SD and I flashed it through CW recovery. After flashing it, my Gnex was stuck in bootloop. I had no choice but to restore it.
After I restored it, I no longer had boot animation.. it was just a blank screen between the Google logo and the lockscreen.
Boot animation was enabled in the ROM controls. So I really don't know what I did wrong.
How can I fix this?
Sent from my Galaxy Nexus using Tapatalk 2

Ahmato27 said:
Hey guys,
I tried flashing Franco kernel on my GNex running Foxhound black edition 0.6 yesterday. Strangely, after flashing it, the device refused to boot up.
Luckily I had trinity kernel (which I was initially on) on my SD and I flashed it through CW recovery. After flashing it, my Gnex was stuck in bootloop. I had no choice but to restore it.
After I restored it, I no longer had boot animation.. it was just a blank screen between the Google logo and the lockscreen.
Boot animation was enabled in the ROM controls. So I really don't know what I did wrong.
How can I fix this?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
is there a bootanimation.zip in your /system/media folder? if no there is your answer ... copy one in there with root explorer
if all else fails do a full wipe including /system and re-flash your rom

Updater Script Help

I have just cooked my first SGS3 Rom using Dsixdas kitchen.
When i flash the Rom in CWM it seems to flash ok, when i reboot to boot up the Rom, i get the Samsung logo, then a black screen and thats it.
I have to just pull the battery , I can get back into CWM no problem, just wondering if anyone has ever experienced this.
I used the stock bell Rom, it all went well through the Kitchen
Thanks

Bootanimation.zip caused bootloop

Hi Guys, I've stuffed up my LG G3 with a boot animation for a phone with the same resolution. I replaced the stock boot image (hidden in data/) and rebooted, the animation plays great! over and over and over. The original bootanimation zip is still in that folder as bootanimation.zip.orig.
Is there any way of fixing this without reflashing? I'm currently using an Optus/Virgin Mobile branded LG G3.

Flash using normal flash not CSE. Should hopefully fix it. Don't replace boot image. If you want to change the boot animation you just need to replace the bootanimation.zip with the one you want.

samorgs said:
Flash using normal flash not CSE. Should hopefully fix it. Don't replace boot image. If you want to change the boot animation you just need to replace the bootanimation.zip with the one you want.
Click to expand...
Click to collapse
Hi, Thanks for the speedy reply, can you elaborate on what you mean by "Normal flash"? As for the boot animation, dont worry, if I can recover my phone I wont be doing any tinkering again without fully understanding what I'm doing lol.
I'd also like to point out that I stupidly, didnt install a custom recovery before doing this. any help would be appreciated.

Using LG flash Tool, select the KDZ file you want to flash then select normal flash as in the picture.
Hope this helps.

Thank you, I will try that tonight.

Nah, didnt work. It cant even register that my phone is connected to the PC. even in download mode

[Q] Screen Not Turning Off

Today I had tried to change my boot animation by replacing the .qmg files under system\media. However, it seems that I messed up and the boot animation is just nothing now. My S3 boots up fine, but the screen will not turn off and pressing the power button doesn't do anything. I know it's not a problem with the button as I can hold it to open the shutdown menu. The menu and back button light up when the phone is booting up but do not light up when I click on them now.
What I did was replace the bootsamsung.qmg and bootsamsungloop.qmg with 2 other .qmg files. How can I make my screen turn off again and get the stock boot animation back? I rooted by towelroot and my bootloader is *locked if that has to do with the problem.

FYI, the bootloader on the i747 and i747m was never locked.
Did you try downloading a stock ROM and extracting the images from there?

audit13 said:
FYI, the bootloader on the i747 and i747m was never locked.
Did you try downloading a stock ROM and extracting the images from there?
Click to expand...
Click to collapse
Thanks for replying! What should I do after that?

When you installed the replacement files, did you file the permissions for the replacement files?
If you extract the stock ROM, are you able to located the original files?
Did you try installing the stock files and fixing permissions?
Are you running a custom recovery?

audit13 said:
When you installed the replacement files, did you file the permissions for the replacement files?
If you extract the stock ROM, are you able to located the original files?
Did you try installing the stock files and fixing permissions?
Are you running a custom recovery?
Click to expand...
Click to collapse
I had the permissions as rw-r-r. I am downloading the stock ROM now. And no I am not running a custom recovery.
Do you have the stock bootanimation.qmg?

audit13 said:
When you installed the replacement files, did you file the permissions for the replacement files?
If you extract the stock ROM, are you able to located the original files?
Did you try installing the stock files and fixing permissions?
Are you running a custom recovery?
Click to expand...
Click to collapse
Ah, I have fixed it by putting back the stock bootanimation.qmg. Thank you for your help!

Glad you posted your solution in case another member experiences the same issue.