Related
I just purchased this phone (i9100) last night after a long travel to track it down. today I simply wanted to update the firmware on it and I was using Odin3 v1.85 to do it but It failed and stayed like that for an hr with the phone in the download mode. I finally disconnected the phone and started it back up and it said " firmware upgrade encountered" with the phone on icon on the left a yellow triangles in the middle and a computer on the right side. Almost looks as though the symbols and words are cutting off the screen.
I can boot into the Download mode but the computer does not recognize the phone anymore nor does Odin or Kies. So I cant even attempt to re-flash the damn thing... I'm so upset right now and feel like taking a hammer to this damn phone...
Any help would be greatly appreciated. I've don't everything when it comes to drivers uninstalling Kies, using other computers without Kies installed, different ports and cables. I've done it all as far as i can see.... also I cant return the damn thing as i didn't buy it from a store. so im **** out of luck if i cant get this working.... PLS HELP!
Are you sure you are downloading the right version of the drivers? I ask because it sounds like you bought the international galaxy s II and not the Epic 4G Touch but you asking the question in the E4GT forums.
The phone is Sprint branded and so is the box.
jettienne12 said:
The phone is Sprint branded and so is the box.
Click to expand...
Click to collapse
Okay, so for future reference... you have the D710, NOT the i9100. (The i9100 is the international SGS2, different enough from the Epic Touch that you can't flash i9100 firmware.)
That said, if you can get into download mode then all is not lost!!
Restart your computer. Also, when you use odin, be sure to go into your Windows task manager and close any Kies tasks/processes that may be running in background. You only need Kies for the drivers it provided when you installed it onto your pc.
Suggest you put your phone into download mode, and follow the instructions in the 1st post in this thread:
http://forum.xda-developers.com/showthread.php?t=1282420
I tried the instructions in the link. however, the problem seems to that the phone is not being detected by the computer or the drivers dont seem to be working. I tried this on my other computer and while the phone is in download mode it is still not being detected by the computer or odin.... what can be causing this as before the firmware update that failed it was being detected perfectly fine.
I pretty much have the exact same problem as posted here.
http://forum.xda-developers.com/showthread.php?p=18176145#post18176145
jettienne12 said:
I pretty much have the exact same problem as posted here.
http://forum.xda-developers.com/showthread.php?p=18176145#post18176145
Click to expand...
Click to collapse
Sorry to be the bearer of bad news, but I was never able to get any computer to recognize the phone in that state. I was able to take it to the Sprint store and they ended up giving me a new one for a small service charge. Since you didn't get it at a store I would contact Samsung and give them the story that cooza suggests in the thread you linked. Good luck and post back if you ever get it working, I am still curious as to what was wrong.
The only thing that might be hampering your effort is Kies might be still active. I overlooked this instruction (as was mentioned in a previous post). Before starting Odin or connecting your phone go into Windows task manager (ctrl/alt/del) and click on processes. Scroll down and you'll probably see a Kies process running. End that process, then try it again.
.....
Sorry but Kies has been completely uninstalled from this computer and the other computer.
are you plugging the phone before or after entering download mode?
I did both before and after to see if that would make a difference, but no go.
jettienne12 said:
Sorry but Kies has been completely uninstalled from this computer and the other computer.
Click to expand...
Click to collapse
I thought you needed the drivers from Kies?
.....
I installed the drivers without it, I downloaded the drivers for my model phone from another member who suggested it.
Try deleting the drivers that u have and reinstalling kies. Use different usb ports.
Sent From My Evo Killer!!!
i would reinstall kies..... or if you have a linux box maybe try heimdall > http://forum.xda-developers.com/showthread.php?t=755265 to flash
Guys, I tried Ubuntu but with no luck. The computer simply will not detect the phone. At this point I believe only Samsung can fix or replace this. I will contact them tomorrow and see. Maybe they will do it for free or maybe they will charge a small fee (small I hope if any) but thank you all for the help.
Hello everyone,
I recently bricked my Epic 4g Touch by accident while trying to upgrade the software. I have no idea how to fix it. I do have insurance on the phone, but I called the insurance and they said that the phone is back ordered so it will take quite a while if I have to get a replacement. So, I REALLY want to try and fix this one.
Now, I know there are other threads about unbricking, but my case is unique and other threads have not resolved my problem. If anyone here could manage to help me unbrick my Epic 4g Touch I would be so appreciative.
When I turn on the phone, it says "Deleting Cryption Meta Data, Copying media files..., Updating Application, and Applying Multi-CSC" then it goes to Android system recovery. The menu options are "reboot system now, apply update from sdcard, wipe data/factory reset, and wipe cache partition".
I can scroll up and down but if I select any item, the screen goes to an image of an exclamation point inside of a triangle. So I cannot navigate or use this menu.
Now, I CAN get into download mode. However, when I load Odin, I cannot get it to detect my phone. The ID:COM area remains blank and will not go yellow. I cannot get my computer to recognize my phone at all.
Can someone please help me with this? I really need to use my phone and I cannot even get a replacement from my insurance because they are back ordered.
Please help. I profoundly appreciate any help you might be able to offer.
Do you have all the correct drivers installed?
install Kies on your computer it will install the drivers. Connect the phone to your computer and let the drivers install. then odin back to stock
ehusidic said:
install Kies on your computer it will install the drivers. Connect the phone to your computer and let the drivers install. then odin back to stock
Click to expand...
Click to collapse
I installed the drivers from Kies but my phone still is not detected on my computer. Not in Kies, not in Odin and not in Device Manager. I don't understand it. I have always read that if you can get into download mode, you should be able to unbrick a phone fairly easily. However, I have NOT heard of a phone that turns on yet is not able to be seen by a computer at all.
Do you have any other suggestions? I really don't know what to do because I can't even get a replacement now.
Thanks so much.
I had the same problem, I fixed it by changing the drivers, I needed 64 bit
Sent from my SPH-D710 using xda premium
uninstalling kies deleting the drivers and reinstalling kies fixed it for me once too.
Try what others have said about uninstalling and reinstalling kies, also try another USB cord, on the OG epic I sometimes had to use other cords because odin was being picky.
You are exactly where I was. I posted this previously as well. I kinda thought you had copied my post.
I had to send my phone in to get it fixed. Rather pay $50 instead of $100
http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/
My phone wouldn't connect to my laptop, Linux on my laptop (dual boot), desktop, school computer. It happened when I had flashed a ROM that was the international version. The Galaxy S2 is not the same phone as the Epic 4G Touch. I learned that the hard way.
If nothing works for you, you can send it to that guy up there. And don't worry, he was even recommended here on XDA, so it's safe. If you live in TX, then it's just about a 4-day wait. There is a Shipping map to show you expected waiting time. Expecting mines tomorrow .
I reinstalled the drivers and KIES countless times. I have a x32 bit so there was no problem there. If you did the same thing I did and flashed an Int. ROM, then check to see if there are any Int. GS2 drivers. Like drivers specifically for the GS2. That might work, unless they're all the same drivers.
Go to sprint store and play dumb. Get a jig first and reset odin counter of it says that you have a custom rom installed. They will replace for free
Sent from my Galaxy S2
unbrick epic 4G touch
soft bricked my epic 4g touch sent it to Mobile Tech videos in Texas was fixed one day after they received it and returned to me 50 bucks well worth it. Tried to unbrick myself and didn't have any luck.
If you did, in fact, flash an International version of some ROM or another, some people have had luck by installing the USB drivers for the international version. I have not done this, so I can't help you much beyond that, but that should get it recognizing your phone AFAIK.
so I was installing a new boatloader through odin and it failed to install; so I disconnected it. Ever since then, my computer simply will NOT recognize my phone. I have tried every possible method (using different slots and cable). Still, it will not recognize my phone at all.
Has anyone here ever encountered a similar situation and have found a solution?
I would highly appreciate any help. Thanks
What does the phone boot to?
Have you tried a USB jig?
The bootloader takes seconds to flash. Did you really press start and immediatly pull the USB cord? or did it not complete then you pulled the cord? If the latter, what did ODIN say in the logs?
I can get into odin or recovery mode with no problem, I loaded a custom testing version of an ICS Rom that failed to completely install.
I am waiting for my usb jig to come in the mail.
It installed like 80% and then said failed, then I removed it because it said it failed.
I know all my drivers are good because my sister has the same phone and it is unrooted and odin recognizes it fine.
sabatheman said:
I can get into odin or recovery mode with no problem, I loaded a custom testing version of an ICS Rom that failed to completely install.
I am waiting for my usb jig to come in the mail.
It installed like 80% and then said failed, then I removed it because it said it failed.
I know all my drivers are good because my sister has the same phone and it is unrooted and odin recognizes it fine.
Click to expand...
Click to collapse
If you can get into Odin mode then Odin should be able to recognize your phone. Are you sure that Odin on your PC is not recognizing your phone?
Also, try flashing the el26 stock rooted update through cwm. Calk has the appropriate zip over in the dev section.
Sent from my SPH-D710 using Tapatalk
sabatheman said:
so I was installing a new boatloader through odin and it failed to install; so I disconnected it. Ever since then, my computer simply will NOT recognize my phone. I have tried every possible method (using different slots and cable). Still, it will not recognize my phone at all.
Has anyone here ever encountered a similar situation and have found a solution?
I would highly appreciate any help. Thanks
Click to expand...
Click to collapse
Where did you find a boatloader for our phones?!?!?!? That would be a truly Epic accessory for all boatloading enthusiasts! Think of the activities!
Haha, in all seriousness though, I hope you can get it figured out man, bricked phones are no fun!
yes, im 100% sure, Ive read of a few cases of people having similar problem. Problem that come from disconnecting a phone while loading a new boatloader. Once that happens, odin will not recognize a phone even if it is in Odin mode. Ive spent atleast 15 hours in total trying to get it to work
bump bump bump
sabatheman said:
I loaded a custom testing version of an ICS Rom that failed to completely install.
Click to expand...
Click to collapse
Is this one made for E4GT or one for the european GS2?
If you can get into recovery just take the sd card out and put it in a sd reader and put a rom on there and flash it. I would use the stock rom. Something simillar happened to me and this is how I fixed it. I didnt have a card reader so I just used my digital camera, Thank god for that!!! Hope it all works out.
---------- Post added at 12:12 AM ---------- Previous post was at 12:11 AM ----------
sfhub said:
Is this one made for E4GT or one for the european GS2?
Click to expand...
Click to collapse
Good question! I almost bricked my phone by putting a rom on there that was for the international version! You need to triple check to make sure what you are putting on is actually for your phone!
sabatheman said:
I can get into odin or recovery mode with no problem, I loaded a custom testing version of an ICS Rom that failed to completely install.
I am waiting for my usb jig to come in the mail.
It installed like 80% and then said failed, then I removed it because it said it failed.
I know all my drivers are good because my sister has the same phone and it is unrooted and odin recognizes it fine.
Click to expand...
Click to collapse
Omg again people don't read. We don't have ics from for our phone! Gosh try to download the international gs2 drivers of get your phone jtaged. If not you got a paperweight
Sent from my SPH-D710 using Tapatalk
I installed the one for the european s2 version,
rbtrucking, Ive tried doing that, but it says unable to mount the sd card when i go into recovery mode and applying update from external storage? any idea why?
sabatheman said:
I installed the one for the european s2 version,
Click to expand...
Click to collapse
Your problem isn't that you disconnected the phone while flashing a new bootloader.
Your problem is you flashed the european GS2 version of the bootloader. After doing that the USB port is pretty much disabled and nobody has found how to enable it.
interesting... any theoretical methods to get it to work? do you think there will be a solution to fix it?
sfhub said:
Your problem isn't that you disconnected the phone while flashing a new bootloader.
Your problem is you flashed the european GS2 version of the bootloader. After doing that the USB port is pretty much disabled and nobody has found how to enable it.
Click to expand...
Click to collapse
Nothing should be flashed to the Epic Touch unless its in the development section for the Epic Touch. Even then you should read up and know the pros and cons of flashing it. I don't recall anyone getting their phone back after doing this.
Sent from my SPH-D710 using xda premium
Well Mobile ODIN won't flash the bootloader AFAIK, so if you have no way to flash the bootloader, the only other possibility will probably be JTAG, which is basically opening up the phone connecting to some pins/leads on the board and using some software to flash. I haven't seem anyone posting about this but probably there are techs who have the proper setup to do it.
damn, do you think if I go to a sprint corporate store and just say I was trying to update the phone via samsung kies OTA or something, will they be able to fix it? I am waiting for my jig to come in the mail to clear the download count, any opinions what I should tell sprint to avoid getting my warrenty voided?
sabatheman said:
I installed the one for the european s2 version,
rbtrucking, Ive tried doing that, but it says unable to mount the sd card when i go into recovery mode and applying update from external storage? any idea why?
Click to expand...
Click to collapse
Ya because like everyone else said flashing that file that wasnt for your phone messed up the sd reader. Same thing happened to me once but I was still able to acess the internal storage that the phone has built in but i didnt have any roms on there. I was however able to flash through odin and dowload mode. Thank god that worked for me! If that isnt working for you I gotta be honest I really dont see a way to get the phone back up and running but I am by no means a pro. I would keep at it. When I almost bricked my phone I was going to give up too but I stuck with it and the fine people on this site pulled me through! You are at the right place trust me very smart people here!
thanks, this phone has been bricked for a week, Im still waiting on my usb jig to come in the mail so i can hopefully clear the binary download count because I want to take it to sprint? since my usb and sd reader isnt working, will the usb clear the odin thing? if it doesnt, im completely screwed. im willing to short out my phone worst case scenario... I need it a replacement (i dont have insurance but i have warrenty)... any ideas? should i short it out or take it to sprint... what excuse should I make up if I decide to take it?
Will the usb jig clear the download count even though my usb and sd reader doesnt work. (the phone still charges through usb)
sabatheman said:
thanks, this phone has been bricked for a week, Im still waiting on my usb jig to come in the mail so i can hopefully clear the binary download count because I want to take it to sprint? since my usb and sd reader isnt working, will the usb clear the odin thing? if it doesnt, im completely screwed. im willing to short out my phone worst case scenario... I need it a replacement (i dont have insurance but i have warrenty)... any ideas? should i short it out or take it to sprint... what excuse should I make up if I decide to take it?
Will the usb jig clear the download count even though my usb and sd reader doesnt work. (the phone still charges through usb)
Click to expand...
Click to collapse
Ya if you have warranty i would actually just short it out! I had a friend that had an iPhone and he hooked it up to a computer with a messed up usb. It shorted it out, he took it back with his warranty info and walked out with a brand new iPhone no questions asked. If you dont and they see that it was routed you are going to be **** out of luck I can tell ya that. They definitely will inspect it to make sure there was no foul play with it trust me, best bet if you cant get it running is to short it out, and use the warranty. When you take it in just say it went off and you couldn't get it to go back on.
Honestly breaking the phone is your best option since the insurance will cover that. If you short it out or make the batter overload while it's in the phone then it's covered by the warranty. Also, clearing the download counter is pointless - if Sprint does manage to fix your phone it'll be pretty obvious you did something that made it FUBAR - mostly the international GS2 bootloader. Also, isn't the international GS2 GSM? Which means you can't reset it using a JIG, GSM versions don't support it.
Either way when you get a new one - make sure you read EVERYTHINGlet me say this again since people seem to take this stuff lightly: READ EVERYTHING BEFORE FLASHING if we had ICS for this phone don't you think the Dev section would be blowing up with ICS ROMs? Common sense seems to be the one thing that isn't common anymore....
Hope you figure something out though but I wouldn't hold my breath.
I can get into download mode, but odin doesn't recognize, the only other screen i get too sdays "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again, but Kies cant connect to it, am i screwed? Please help this all happened from changing my screen density, i cant find anyway too restore, i'm not a noob and am in desperate help, i'm gonna be soo bummed if i brick, but i have a feeling if i can get too download mode, there must be a way too restore it.
BbbYou say no recovery, but you should have at least stock recovery I think. Try holding volume up and power, is you can get in, restore to stock from there.
If doesn't work I would start by reinstalling the drivers or try a different computer.
You'll be fine.
Also you should state you rom, what you did before, rooted, etc
Sent from my SPH-D710 using Tapatalk
I flashed the newest version of Roman BB's AOKP CM9 Kang and tried to change the density, i went too restore my nandroid and it froze before it finished, I tried odin and the first 2 times it recognized but both froze before the end. im kinda couch surfing so now i'm incredibally screwed without a phone, please help.
badname said:
BbbYou say no recovery, but you should have at least stock recovery I think. Try holding volume up and power, is you can get in, restore to stock from there.
If doesn't work I would start by reinstalling the drivers or try a different computer.
You'll be fine.
Also you should state you rom, what you did before, rooted, etc
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Roman bb's most updated AOKP, i changed the screen density and when i went to reboot it bootlooped, so i tried restoring a nandroid wich failed, tryed again, and now i cant get too recovery, i can only get too download mode, so i tried using odin too go back too stock, it failed almost at the end, twice, now i cant get odin to recognize my phone and it wont turn on, the only thing i can do is get too download mode, and too the thing saying use kies recovery, which does nothing because it won't connect. I'm at a total lost, i'm so scared i lost my only source of income, at this point in my life, if i dont have a phone, i dont have work or food or a warm place too sleep. Please anyone with any ideas please help.
I hate to be the one to tell you this but you're probably bricked. The giveaway is if you have problems in Odin at data.img:
http://forum.xda-developers.com/showthread.php?t=1504808
Will recommend that if you have further questions to post in that thread.
When going from ICS to anything else you should use ODIN to go back to stock. Anything else and you're risking a brick. More here:
http://forum.xda-developers.com/showthread.php?t=1525495
Hope this helps.
One quick question - which phone are you using and which usb cable for odin?
Be sure that using the original usb cable during odin.
kobridge said:
One quick question - which phone are you using and which usb cable for odin?
Be sure that using the original usb cable during odin.
Click to expand...
Click to collapse
I've never heard that one before. What do you think is unique about the stock micro-usb cable?
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
garwynn said:
I hate to be the one to tell you this but you're probably bricked. The giveaway is if you have problems in Odin at data.img:
http://forum.xda-developers.com/showthread.php?t=1504808
Will recommend that if you have further questions to post in that thread.
When going from ICS to anything else you should use ODIN to go back to stock. Anything else and you're risking a brick. More here:
http://forum.xda-developers.com/showthread.php?t=1525495
Hope this helps.
Click to expand...
Click to collapse
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
simple
TimidRat said:
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
Click to expand...
Click to collapse
use a different cable and uninstall drivers and reinstall reboot computer also
kobridge said:
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
Click to expand...
Click to collapse
Yeah now that you mention it I realized my nook color micro usb cable has a longer metal end-piece than my E4GT, and won't connect properly. I thought the length of the metal prong would have also been standardized. Go figure.
TimidRat said:
I flashed CM9. i went too restore my nandroid.
Click to expand...
Click to collapse
This is the problem unless you flashed a gb kernel/recovery first. You should not do anything in ICS recovery.
kobridge said:
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
Click to expand...
Click to collapse
Its true not all cables are the same, but the funny part is from the beginning of OG Epic days we figured out quick the only thing you should do with the stock cable is charge... its garbage. Maybe the new model is better, havent tried it, but it looked pretty much the same, thin little thing... I use my 4 year old BBerry cable, about as thick as a cat-5... never had an issue. But yeah, try new drivers, cable, diff PC, use a USB that is physically part of the Motherboard of the PC (desktop)... all these things help with the shoddy drivers, etc... you may get lucky...
TimidRat said:
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
Click to expand...
Click to collapse
But you said you did attempt a restore through CWM after the bootloop, correct? If you did and you're having problems you *may* have bricked. Using ODIN is a surefire way to confirm whether you did or not. If you didn't attempt anything through CWM while having CM9 installed then you may not be bricked but are obviously still having issues. As it has been said before - and quite often - CWM at your own risk; ODIN is believed to be the safest option.
Regardless, if you're having problems and the USB cable doesn't fix it I'll still recommend trying to get back to a GB stock ROM by ODIN. At the worst you've lost what you have done since the last backup, since you can restore that from the backup once you get back to GB. With so many bricked phones lately it may be best to err on the side of caution this time...
I've tried everything mentioned, except a different pc, i tried linux, on my pc odin doesntr recognize my phone, , but i just went and plugged a flash fdrive in so now im thinking my computer is having usb problems, so im gonna try another computer, i also made a usb jig to reset the odin counter too take it too sprint but it didnt work... i'm so confused and screwed without my phone. Thank you everyone for trying too help. Any more ides are greatly appreciated! Thanks soo much guys!
ive had this problem before and basically my phone would turn on but no signal sd card didnt work wouldent read in computer but if you cant get it to work and have fifty bucks u can go to mobiletechvideos.com and it will take about mabe 3-4 days mine took a week since i sent on a friday but it costs fifty bucks and the only thing when i came back that wasnt working 100% was the picture gallery. true him if it comes down to it
Well, since you're getting the firmware upgrade error, I'm gonna bet your phone is bricked. That happened to me, I finally took it to the Spring repair center and they couldn't fix it, so they swapped my phone out.
Sent from my Zack Morris brick phone
blackroseMD1 said:
Well, since you're getting the firmware upgrade error, I'm gonna bet your phone is bricked. That happened to me, I finally took it to the Spring repair center and they couldn't fix it, so they swapped my phone out.
Sent from my Zack Morris brick phone
Click to expand...
Click to collapse
Yup that's what theyre doing for me, i'll get it tomorrow or tuesday, cant complain too much im gonna get one with no scratches.
Thank you everyone who replied, im set egtting my new one, im gonna try and swindle kepping the bricked one cause im sure it could be of major use too a dev....
Sprint Epic 4G Touch Appears Bricked
My Sprint Samsung Galaxy S II Epic 4G Touch will no longer connect to my computer (also tried another computer and different usb cable), after a failed attempt to upgrade to ICS 4.0. The phone will not load up now to 'normal' operating mode.
It will only come up to the message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I can no longer get into Recovery or Download modes. At least none that work. (See below)
I also built and tried the USB jig solution, which does power on the phone, but it then comes up and says:
FACTORY MODE
PRODUCT NAME" GT-19100
CUSTOM BINARY DOWNLOAD: YES (2 counts)
CURRENT BINARY: SAMSUNG OFFICIAL
Downloading...
Do not turn off target!!
But connecting to my PC still fails. Any ideas?
Long time listener first time caller (this is my first post here) I'm going to try not to leave out any details. Bear with me.
I rooted my Tmobile Galaxy s3 for the first time and installed CM10.1. It was great for a few months, then it started getting glitchy. So I would flash the nightly release and it would be fine for a while. I decided to unroot and start fresh. It was then that I discovered the PC wouldn't recognize the device. I followed a youtube tutorial to unroot with Mobile Odin. I extracted and flashed a stock image called Tmobile_GS3_SGH-T999_4.0.4 after clearing counter with Triangle Away.
Well it seemed to go well, unrooted my device, but now the OS is incomplete. No internet app, messaging won't work at all, and it keeps crashing and freezing. The usb port is still not working so I cannot root with my computer, and the flash counter still says 1 and status says modified.
Tmobile sent me a new one on warranty, but I'm really worried they're gonna charge me 500 bucks because it's "modified". I have a few days before I have to send it back, Is there anyway that I can fix this without connecting it to my computer? Any help is GREATLY appreciated.
Thanks
re: flashing stock rom.
empire-1 said:
Long time listener first time caller (this is my first post here) I'm going to try not to leave out any details. Bear with me.
I rooted my Tmobile Galaxy s3 for the first time and installed CM10.1. It was great for a few months, then it started getting glitchy. So I would flash the nightly release and it would be fine for a while. I decided to unroot and start fresh. It was then that I discovered the PC wouldn't recognize the device. I followed a youtube tutorial to unroot with Mobile Odin. I extracted and flashed a stock image called Tmobile_GS3_SGH-T999_4.0.4 after clearing counter with Triangle Away.
Well it seemed to go well, unrooted my device, but now the OS is incomplete. No internet app, messaging won't work at all, and it keeps crashing and freezing. The usb port is still not working so I cannot root with my computer, and the flash counter still says 1 and status says modified.
Tmobile sent me a new one on warranty, but I'm really worried they're gonna charge me 500 bucks because it's "modified". I have a few days before I have to send it back, Is there anyway that I can fix this without connecting it to my computer? Any help is GREATLY appreciated.
Thanks
Click to expand...
Click to collapse
First thing to do is to put the phone into DOWNLOAD mode to TEST it and see if ODIN will recognize it.
If Odin recognizes it then there is NO need to send it back to Samsung, all it needs is a proper Odin flash.
Just because when all those missing apps and the usb had issues it does not necessarily mean that Odin will not recognize the phone.
If your computer is not working or you don't have a windows computer find a relative or a friend who has one.
Even a laptop computer would do just fine.
Good Luck!
Tried that
Thanks for your response, I have tried connecting it to Odin in download mode and it still will not see it. I really don't know what the problem could be. the usb used to work fine and there has been no physical damage.
re: try this.
empire-1 said:
Thanks for your response, I have tried connecting it to Odin in download mode and it still will not see it. I really don't know what the problem could be. the usb used to work fine and there has been no physical damage.
Click to expand...
Click to collapse
Try a different usb cable and or plug usb into different port,
if that fails, re-install the Samsung usb drivers for the phone.
Remember, if the phone goes into download mode 99.999% of the time the phone
can be flashed successfully using Odin.
The main reasons for usb issues in "download mode" are either loose connection to computer's usb ports,
usb cable intermittant or the Samsung usb drivers in the computer are corrupted in one way or another.
Thanks again
I guess I should have put this in my first post. I have tried 2 different cables in every port on 2 different computers. I have re installed the drivers multiple times as well. Also the new phone they sent me is recognized just fine.
empire-1 said:
I guess I should have put this in my first post. I have tried 2 different cables in every port on 2 different computers. I have re installed the drivers multiple times as well. Also the new phone they sent me is recognized just fine.
Click to expand...
Click to collapse
You are in a tough spot. I don't know if you have the stock recovery or not but if not you can either download the stock rom on the phone again...you know the best way although unethical really...being that the usb port is down is to re root it and flash a rom like the gt 1300 or whatever the international version is and intentionally hard brick your phone. Hard brick meaning won't even turn on withOut jtag and that even just clears everything out and reloads software like from the factory.If the phone won't boot up then there's no way for the person to tell its been modified. Majority of the time samsung doesn't get the damaged phones its some idiot making 8 bucks an hour to refurbish phones. That's what I would suggest you do being that the counter is still saying one flash
tmobile s3 running wicked. best rom i've ever used
Pretty sure I'm on stock recovery. it does give me an option to "apply update from external storage"
Thanks for all your help, I'll try to flash the stock rooted rom through the stock recovery although i'm not optimistic.
I will check out the wicked rom you mentioned, although I am a little hesitant to root my new one after this ordeal.
but how do I re root it if I have no usb or custom recovery?
re: flashing
empire-1 said:
but how do I re root it if I have no usb or custom recovery?
Click to expand...
Click to collapse
If you can get your phone to boot normally with any stock rom rooting will not be a problem at all.
If you get the phone working and booting properly you would be very lucky but from reading
everything you have wrote so far I highly doubt that you can successfully flash any rom at all
unless you have forgotten to tell us something.
Don't worry about rooting, worry about getting the phone to boot and work properly with stock rom.
yep. running stock recovery. hopeless?
re: flashing
empire-1 said:
yep. running stock recovery. hopeless?
Click to expand...
Click to collapse
I never said a word about stock recovery, I said STOCK ROM.
Invest in a JIG, it puts your phone into download mode instantly even if you cannot
do it manually with the three buttons as long as the phone is not completely dead.
You can buy a jig for less than $4.00 shipped on eBay, it's great little tool.
All you do is remove the battery from the phone and put it back in then simply plug
the jig into the usb port then in a couple seconds it will be in download mode then you
can unplug the jig and the phone is ready to be odin flashed..
Remember what I said before, just because the usb did not work with some
rom you flashed it does not mean that it will not work for download mode.
The jig was one of the best investments I have made when I started using these samsung android phones.
Once in download mode it will allow you flash the stock or stock rooted Jellybean 4.1.1 rom.
This is my best advice.
I am not having a problem getting into download mode, I will take your advice and buy a jig though in case I ever need it. Again, thanks for all your help, I think I may have to send it back and hope for the best.
re: flashing
empire-1 said:
I am not having a problem getting into download mode, I will take your advice and buy a jig though in case I ever need it. Again, thanks for all your help, I think I may have to send it back and hope for the best.
Click to expand...
Click to collapse
Before sending it back, if I were you I would find a friend or family member who has
a windows computer and just for the hell of it install the usb drivers in the computer
just to see for sure that while in download mode and connected usb cable if Odin still
is not lighting up the [COM:xx] top left rectangle on Odin screen.
I have odin flashed many phones dozens of times in the past 3 years and I have yet
to come accross one which goes into download mode but odin is not reconized
unless there is something wrong with the windows computer or usb ports and drivers.
That only happens as I said before, if there is something wrong with the drivers,
usb ports and or usb cables or some other malfunction in the windows computer.
Just think, if it works no need send the phone to samsung plus you would have learned
something too.
I did try my other computer with the same results, tomorrow I will try it with my girlfriends laptop, I am starting to think something happened to the usb jack. It didn't work before I unrooted it either, that's why I used Mobile Odin. I am all about learning this stuff though. I plan to root every new phone I get, this has just been a little frustrating.
re: well that's it!
empire-1 said:
I did try my other computer with the same results, tomorrow I will try it with my girlfriends laptop, I am starting to think something happened to the usb jack. It didn't work before I unrooted it either, that's why I used Mobile Odin. I am all about learning this stuff though. I plan to root every new phone I get, this has just been a little frustrating.
Click to expand...
Click to collapse
This is the first I heard that the usb did not work before and the usb socket might be broke.!!!
In that case since you cannot use the Wifi in your phone to transfer and install apps since it cannot boot normally
(unless I am missing something again) and you cannot use usb and it would not even help to remove the external
sd and copy any apps at all since you would have no way to install the apps.
Then you are right, you have to send it back, exchange it and hopefully you can come up
with a good enough excuse why it's not working so samsung will not charge anything )which I doubt)
I must not have been clear, I can use the phone. it makes calls, the wifi works, i can use third party messaging and browser apps. again, there has been no physical damage. the socket worked a few weeks ago when I rooted it. I only noticed it not working when I went to unroot it.
So basically it sounds like there is no way to root or install custom recovery without usb, correct?
empire-1 said:
I must not have been clear, I can use the phone. it makes calls, the wifi works, i can use third party messaging and browser apps. again, there has been no physical damage. the socket worked a few weeks ago when I rooted it. I only noticed it not working when I went to unroot it.
So basically it sounds like there is no way to root or install custom recovery without usb, correct?
Click to expand...
Click to collapse
I don't know of any way unfortunately
tmobile s3 running wicked. best rom i've ever used
Josh McGrath said:
I don't know of any way unfortunately
tmobile s3 running wicked. best rom i've ever used
Click to expand...
Click to collapse
Can you flash it through mobile odin? I don't know anything about the mobile version.
tmobile s3 running wicked. best rom i've ever used