Develop Bugs

[Q] I'm Convinced my phone is Bricked

I just purchased this phone (i9100) last night after a long travel to track it down. today I simply wanted to update the firmware on it and I was using Odin3 v1.85 to do it but It failed and stayed like that for an hr with the phone in the download mode. I finally disconnected the phone and started it back up and it said " firmware upgrade encountered" with the phone on icon on the left a yellow triangles in the middle and a computer on the right side. Almost looks as though the symbols and words are cutting off the screen.
I can boot into the Download mode but the computer does not recognize the phone anymore nor does Odin or Kies. So I cant even attempt to re-flash the damn thing... I'm so upset right now and feel like taking a hammer to this damn phone...
Any help would be greatly appreciated. I've don't everything when it comes to drivers uninstalling Kies, using other computers without Kies installed, different ports and cables. I've done it all as far as i can see.... also I cant return the damn thing as i didn't buy it from a store. so im **** out of luck if i cant get this working.... PLS HELP!

Are you sure you are downloading the right version of the drivers? I ask because it sounds like you bought the international galaxy s II and not the Epic 4G Touch but you asking the question in the E4GT forums.

The phone is Sprint branded and so is the box.

jettienne12 said:
The phone is Sprint branded and so is the box.
Click to expand...
Click to collapse
Okay, so for future reference... you have the D710, NOT the i9100. (The i9100 is the international SGS2, different enough from the Epic Touch that you can't flash i9100 firmware.)
That said, if you can get into download mode then all is not lost!!
Restart your computer. Also, when you use odin, be sure to go into your Windows task manager and close any Kies tasks/processes that may be running in background. You only need Kies for the drivers it provided when you installed it onto your pc.
Suggest you put your phone into download mode, and follow the instructions in the 1st post in this thread:
http://forum.xda-developers.com/showthread.php?t=1282420

I tried the instructions in the link. however, the problem seems to that the phone is not being detected by the computer or the drivers dont seem to be working. I tried this on my other computer and while the phone is in download mode it is still not being detected by the computer or odin.... what can be causing this as before the firmware update that failed it was being detected perfectly fine.

I pretty much have the exact same problem as posted here.
http://forum.xda-developers.com/showthread.php?p=18176145#post18176145

jettienne12 said:
I pretty much have the exact same problem as posted here.
http://forum.xda-developers.com/showthread.php?p=18176145#post18176145
Click to expand...
Click to collapse
Sorry to be the bearer of bad news, but I was never able to get any computer to recognize the phone in that state. I was able to take it to the Sprint store and they ended up giving me a new one for a small service charge. Since you didn't get it at a store I would contact Samsung and give them the story that cooza suggests in the thread you linked. Good luck and post back if you ever get it working, I am still curious as to what was wrong.

The only thing that might be hampering your effort is Kies might be still active. I overlooked this instruction (as was mentioned in a previous post). Before starting Odin or connecting your phone go into Windows task manager (ctrl/alt/del) and click on processes. Scroll down and you'll probably see a Kies process running. End that process, then try it again.
.....

Sorry but Kies has been completely uninstalled from this computer and the other computer.

are you plugging the phone before or after entering download mode?

I did both before and after to see if that would make a difference, but no go.

jettienne12 said:
Sorry but Kies has been completely uninstalled from this computer and the other computer.
Click to expand...
Click to collapse
I thought you needed the drivers from Kies?
.....

I installed the drivers without it, I downloaded the drivers for my model phone from another member who suggested it.

Try deleting the drivers that u have and reinstalling kies. Use different usb ports.
Sent From My Evo Killer!!!

i would reinstall kies..... or if you have a linux box maybe try heimdall > http://forum.xda-developers.com/showthread.php?t=755265 to flash

Guys, I tried Ubuntu but with no luck. The computer simply will not detect the phone. At this point I believe only Samsung can fix or replace this. I will contact them tomorrow and see. Maybe they will do it for free or maybe they will charge a small fee (small I hope if any) but thank you all for the help.

[Q] "bricked phone"

i believe my phone is bricked. first i had viperROM v2.2 installed running very smoothly i tried updating the kernel to the new lostexp kernel and i followed the steps which get in cwm wipe cache and dalvik and flash. my phone stays stuck in the samsung logo. i can get my phone to download mode but not to cwm also odin cant detect my phone. i used odin twice i have all the drivers installed but im still lost here. pls help

read my sticky in general section
I just got done dealing with a similiar issue ,but i really hard bricked my epic.
So do you for sure have a stock OS on the epic and positive its not a gsm rom
You can try diff usb plugs uninstall kies reinstall kies.
Try a diff pc , try to open odin after your in dload mode
For those that cant get usb recognition after those attempts just hang it up your probably sceeweTheyd just run down to a local sprint repair shop act like u dont know what happened tell em its useless say u did a kies update and it crashed ,dont mention odin.
They will say ok well flash new software , which then you will watch them hopelessly give up on the usb issue, theyll simply pop in a new motherboard and send you on ur way free of chargeif you dont have insurance on your line theyll add it right there ,trust me i had to do it yesterday
That is what they are paid to do a new motherboard then ur set, just dont fool with it once its fixed .

Problem fixed changed the usb cable (the one that came with my phone) and ODIN worked. Thx
Sent from my SPH-D710 using xda premium

Is it dead?

Hi all,
I tried updating my galaxy s2 with ICS with Odin, but it failed. Now i get nothing but this message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
The problem is that neither Kies or Odin will recognize the phone. It will not go into download mode using the traditional method of holding volume down + power. My PC also does not detect the phone.
Is it dead?! I've tried reading, but no one seems to have absolutely no access to their phone. Any help will be greatly appreciated.

As always, uninstall kies then install it again.If you did flash stock ics and you have sd card, put siyah kernel ( as I think it is signed) and almost any rom there, put sd card to phone and try to boot into recovery ( power+home+ vol up) then install siyah, reboot and hold same keys and install the rom you downloaded
Sent from my sgs2 running cm9 using xda app

Mak: Thanks for the suggestions.
I uninstalled and then installed Kies. Neither Kies nor my PC detects the phone. I tried another computer and do not get detection there either.
I cannot get into recovery (volume up + power + home) or into download (vol down + pwr).
I do not have an SD card, unfortunately.
What else can I try?!

Then you need jig to get your phone working again.
Sent from my sgs2 running cm9 using xda app

baktash said:
Hi all,
I tried updating my galaxy s2 with ICS with Odin, but it failed. Now i get nothing but this message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
The problem is that neither Kies or Odin will recognize the phone. It will not go into download mode using the traditional method of holding volume down + power. My PC also does not detect the phone.
Is it dead?! I've tried reading, but no one seems to have absolutely no access to their phone. Any help will be greatly appreciated.
Click to expand...
Click to collapse
hi
do you used intratech firmwares or from other sources?

so i realized that I tried to flash the wrong fw. my phone is the epic 4g touch for sprint. i tried to put ics on there.
how likely is it that the jig will work? i will order it if it is meant to address the problem i'm having. even with the jig putting my phone into download mode, how can i load anything if my computer will not recognize the phone?
i might have just bricked the phone. how likely is it that the sprint store will try to fix it for me?

Wrong forum. Ask here.
If they notice what you did to it, you'll be paying for it to be fixed. Maybe. You might also be lucky. Jig won't work, nand is borked. Return to service center or JTAG repair.

I think you're right. I'll try to get lucky at the sprint store tomorrow. If no luck, then on to a JTAG'er (any recommendations?).
The link you posted is for epic 4g, not epic 4g touch. I know, confusing. Probably why I'm having this issue to begin with.
Thanks again for the help!

Odia does jtag's and he seems to be pretty good at it
Sent from my sgs2 running cm9 using xda app

Yep Makrilli is right, Odia is a good choice. Or these guys. Haven't used them, but people on XDA have.

I got this message before, too. It happened when I plugged in to the bad cord I had. Odin recognized it until it was in the middle of flashing. Are you sure it won't go back to Odin? Mine did. I'm using it now. I don't think a jtag is what you need, unless you want to give them a really easy one? Good luck!

I had a similar issue, but kernel(rogue touch kernel) had a bad flash. It would play the boot animation and shut off. I couldn't get into CWM or download mode(they both did boot animation and shut off). I let it sit for two hours(at work and could only try on break). On my second break I repeatedly try download mode and after about 20 tries it opened up download mode. Good luck
Sent from my SPH-D710 using Tapatalk

Thanks for the suggestions on Jtag'ers.
Kill and Atticus: I tried repeatedly to put it into download or recovery mode. It just won't do it. And even if it did, my PC doesn't detect the phone at all. So it would be useless to have the phone in download or recovery modes anyways. The phone won't even charge while connect to the PC.
I haven't made my way out to Sprint yet, but will be doing so in a few hours. I'm betting they're going to send me home with my tail between my legs. I'll then check with Amazon to see if there's some kind of manufacturer's warranty I can take advantage of. Then, Jtag as a last resort.
If anyone has any suggestions, please share. Thanks!

OK. I talked with a Samsung technician (my phone is still in warranty) who said that the phone is acting up. He sent me a UPS label to ship it to Samsung for free repair or replacement. They said it'll take about a week. Hopefully they don't say it's my fault and refuse to repair it. Hope I get lucky.

[Q] Bricked Galaxy Nexus GSM 16GB (GT-I9250M)

Hey Everyone,
I'm hoping someone can help me find a way to un-brick my Galaxy Nexus GSM 16GB (GT-I9250M). Before you call me an idiot, I'll have you know I wasn't flashing it or anything. I was simply listening to music when the screen went all glitchy and the sound started looping. Then the phone attempt to restart, but mid way through booting, it would glitch out again. It would repeat this until I finally pulled the battery. When I got home, I tried to get it into Fastboot mode or Download/Odin mode. Neither of which worked. I was running the stock version of android. If I recall correctly, it was running 4.0.2.
So in a nutshell, here's the status of the phone:
Regardless of what I do, Fastboot mode and Download/Odin are not accessible.
No matter what combination of buttons I press, the screen always shows: Phone ... Yellow Alert Triangle ... Computer
Using Galaxy Nexus Toolkit or Wug's Toolkit, the phone is not listed under Fastboot or ADB devices.
While the phone is plugged in via USB without a battery, I see device manager adding and releasing an OMAP4440 device every second or so.
When I plug in the phone (with the battery) in via USB while its off, it will turn itself on showing the alert screen mentioned above.
ODIN is about the only app/toolkit I've used that "sees" the device.
Using ODIN, I have tried various stock images mentioned in the forums. All of them have either failed or get stuck on "NAND Write Start!!"
I've read dozens of posts on various forums but I could not find a concrete solution, so I'm appealing to you guys for help. Any help would be great appreciated.
Thank you!

Based on what you have described, even if I could get it working again, I would try to get a warranty replacement, provided that is an option. Sounds like a hardware failure. Like I said, even if it somehow started working again, I wouldn't trust it.

1. first off you need to download "Odin 3 v1.85" here
2. also download CF-Root-GGN_YAKJU_ICL53F-v5.1 here
3. open Odin in your computer
4. where it says PDA put CF-Root-GGN_YAKJU_ICL53F-v5.1
5. Power on the device and when you have the "phone triangle pc screen" connect it to your PC.
6. ???
7. PROFIT!!!

kmdub said:
Based on what you have described, even if I could get it working again, I would try to get a warranty replacement, provided that is an option. Sounds like a hardware failure. Like I said, even if it somehow started working again, I wouldn't trust it.
Click to expand...
Click to collapse
You're probably right. I still have my Nexus S which I can fall back to resort to this. I will try what nonione has suggested, and if that doesnt work, I will likely look to replace the phone.

I've never seen a samsung phone that couldn't be recovered (other than physical or water damage).
You can easily get the phone back with odin (no you do not have to be in odin mode on the phone).
Study up on it....tons of threads, use search.
Never seen a bricked Samsung....ever...and I've had at least 6 or 8 different models.
(edit)
There;s quite a bit more to it than nonione tried to walk you thru.
You will need the correct drivers on your computer first...buncha other steps too.
Study hard before you try odin.

Google, "Galaxy Nexus OMAP Unbricker". Download it and when the OMAP devices comes up in the Device Manager quickly right click on it and install the driver includes with the OMAP download. Once the driver has installed run the .bat file in the download. Should go to Fastboot now.
Then:
http://forum.xda-developers.com/showthread.php?p=27160425
Download the .pit file here:
http://forum.xda-developers.com/showthread.php?p=27152659
Sent from my SGH-T769 using Tapatalk 2

That's easy to repair, dude
That's not a brick, that's just telling you, that the firmware files are corrupt, all you need, is a jig, a Windows PC, Odin and chainfires ODin files
I can walk you through, on Teamviewer, if you want. I've had this problem quite a lot (Not on the GNex, though) I jope I get it, so I get a GS 3 ^^

I do have the same phone with the same problem..but currently out of the country, so cant get it replaced.. I get no yellow triangle my phone is completely dead..I tried the omap flash no luck..please let me know if the omap flash tool worked for you..

Hey guys,
So a bit of an update. I tried using Odin to flash. None of the files suggested worked for me. I also tried the OMAP flasher. While it "did something" without erroring out, it did not switch to fastboot mode for me. My phone is simply stuck in that yellow alert state. So now, i'm going to try using a Jig as familyguy59 has suggested. I saw a video of one guy use one to fix the exact same issue as I'm having, albeit with his Samsung Galaxy 2, but it looks promising. I purchased one a couple days ago and it should come soon. I'll let you guys know how it goes.

Hey Guys,
So I tried the jig i bought. No dice. I'm pretty disappointed. : / I guess off to Samsung it goes... I just don't have any luck with Samsung products.

SAMSUNG epic 4g stuck on boot screen after trying to restore Stock Rom

I was running CM10 but I got a message whenever I got into the Camera App that said "Unfortunately, Gallery has stopped working", after a research in here I found that I wouldn't get that msg again if I installed this "gapps-jb-picasa-20121011-signed" thing.
I did, but when I got into my Camera App, I didn't have the other options like "Image Effects" and all that stuff.
So, what I did was to Restore my phone from my BackUp folder that I've created before installing CM10, but for my surprise I got a msg saying "VolumeError" or something like that and other things that I can't really remember... and as a good Mexican that I am, I ignored it and hit the Reboot System Now..
What happened next almost made me cry...
I was expecting to get in my stock rom without any problems and yadda yadda but... OH SURPRISE!
I got stuck on the boot screen, where it says "Samsung" and the website of it and I didn't freak out... I waited like 5-6 mins and took the battery out. When I turned again, I tried to get in Recovery Mode but the screen just kept turning off and on and saying the exact same thing, the "Samsung" logo and it's website.
I hope you can help me and please answer me. I don't know if I'm 1000000% screwed but I will only wait for the worst. Sorry for my bad english and don't hate me for being mexican
I don't know if I can get into my phone from my PC but whenever I plug my phone in, it just loads it as if it was in Charging Mode
PLEASE HELP ME!
I BEG YOU!

Flash again CM10 with wipe data, cache, dalvik
If still stuck
Odin to stock ROM, you can search on google to odin the epic
Sent from my JellyBeer v.4.14 epicmtd (b3)

Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator

Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21

AndyYan said:
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
Click to expand...
Click to collapse
Thanks to Everyone!
I solved this like 2 hrs after all this happened.
I got it by Odin. I couldn't go into Recovery Mode, but I got in Download Mode and do it by Odin.
Sorry, I'm a n00b to all this.
Greetings from México and thanks for all your support.

Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?

To the OP:
I would follow the instructions in this video from the part where qbking77 talks about putting the phone in download mode, as you presumably did when you first rooted your phone. Download all the files linked/referenced on the site, especially the Samsung mobile drivers, Odinv3 1.87, CWMRecovery, and the deOxed versions of the stock ROM. In sum:
1) get into recovery mode by holding onto the volume down, camera buttons, and then without letting either of those go, press and hold the power button.
if you get into recovery mode, skip to step 4
2) while your phone is completely off, hold onto the "1" button on the slide out keyboard first, then without letting the 1 button go, press and hold the power button until you're in download mode.
3) flash the version of Clockworkmod
4) once in recovery mode, wipe your phone, clear the cache, and dalvik cache, and then flash the deOxed version of the stock ROM
niteNarmor said:
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
Click to expand...
Click to collapse
Do you have the mobile drivers installed on the computer you're trying to connect your phone to?

Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".

niteNarmor said:
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
Click to expand...
Click to collapse
Uninstall and reinstall drivers.
Sent from my SPH-D700 using Tapatalk 2

Have already done that. But just for laughs, I did do it again with no change.

can you get your D700 into download mode as described above?

Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.

niteNarmor said:
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
Click to expand...
Click to collapse
Try to install another version of Odin or getting Odin from a different server.
My phone is fully recovered and now I'm only SuperUser 'cause I don't want any CM by now.
Greetings from Mexico!

I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
EDIT: I have now downloaded and tried 4 different Odin programs with no avail. Again, that makes 6 Odin programs, 6 different USB ports, 3 different cables with the same exact results. The computer recognizes device but Odin will not.

niteNarmor said:
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
Click to expand...
Click to collapse
Had a simular issue when I had two odins on the same computer, for a lark and as I had nothing better to do, tried installing drivers and one version of odin to a vertual machine running vista and checked to see if my computer's vertual machine would reconize and it did, I took it as a sine that at one point I had done something to my computer's main os sometime between rooting my epic 4g and frying it (recovering from a backup from a different parition layout I think, bad times with bootloops and seeing way to much of the samsung logo.) So as I'm not brave enough to run odin on vm I instead removed all of odin from my main os and all of the samsung drivers, then reinstalled rebooted and repluged my epic in, got reconition and reflashed with plesure.
The other issue might be that your computer is reconizing the device and try/failing/hanging and not allowing odin in. Had an issue when my computer was failing to pop up a 'what do I do with this' window and hanging round in the system. A reboot with the internet unpluged strangely solved that for some reason, might be the reboot might be the combo, but I find better connection reconition with my computer when I've fewer things connected.
Don't mind the spelling to much I clean up with my other device.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app

One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2

jeffreyjicha said:
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Phone does not boot past the "Samsung - www.samsung.com" logo. Plus, as with all of my devices, USB debugging is always checked.
Thanks for the suggestion though. Always helps to double check things.
I believe I am going to take it to Sprint tomorrow.
If I can't get into it, they should not be able to get into to it either. If they can't get into it, HELLO WARRANTY....

Perhaps before doing the whole getting found out thing with the return center, perhaps they do know what they're doing, try rolling this link past your eyes?
http://forum.xda-developers.com/showthread.php?t=773032
I know I've been in your boot problem situation and recovered, it just took persistence and eyenumbing amounts of reading.
Note On the multiple Odin, USB, and driver installation: if you've access to another computer it could be worth wile to run once though on a previously virgin computer, meaning your phone and computers' USB's have never touched. Just do the installation, rebooting, and plugging in exasperatingly meticulous order.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"

Yep tried the "virgin computer" computer as well. The computer sees the device but Odin does not. Com light will not illuminate.

Sounds grim.
So to rap up all the cables, plugs, computer, and software with odin is out of the debug process.
So I did some digging into the past and if your computer is reconizing and odin is not then ADB (android debug bridge) and the sdk are the other option
http://forums.androidcentral.com/epic-4g-rooting-roms-hacks/33427-how-access-your-adb-shell.html
Ran across this and it might just be what you need. Its not quick but it has worked for me in the past.
The other thing that may work is ejecting the sd card and battery before doing anything. Though its likely something you've already tried.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"