Related
Hello Guys
Firstly, Ive been thru this forum and wiki and have tried various things without major success............Im now getting pretty fed-up.
Ive got an O2 XDA IIi, which Ive unlocked ready for my Orange Contract SIM.
My SIM works for phone and text, but keeps getting "no modem" errors if I try to connect GPRS.
Ive downloaded Resco and can see the Extended Rom folder.
Ive downloaded 3 or 4 different Ext Rom Unlockers - without success (Ive deleted each in turn, installed the next version and soft-reset as I went).
I actually have all of the Orange CAB files, which seem to load onto the PDA if i put them in My Docs and click each in turn - BUT, I still cant connect and all reverts back to O2 if I hard-reset.
So, now I have done a hard-reset and soft reset prior to O2 stuff being auto-installed from Ext Rom (?).
Im getting pretty frustrated at not being able to access the write-protected Ext Rom in order to swap the O2 stuff for my Orange settings.
PLEASE - can anyone give me some step-by-step instructions on what I can do ?
AND - let me know if Im looking in the totally wrong place to start with.
Thanks
Paul
My XDA IIi details are :-
Model No PH10C
Windows Mobile 2003 2nd Edtn
Processor Intel PXA272
Speed 520MHz
Flash Size 64MB
Memory 122.04MB
ROM Version 1.10.00 WWE
ROM Date 12/24/04
Radio Version 1.00.00
Protocol Version 1337.39
ExtROM Version - Not Showing as soft-reset during software load
http://wiki.xda-developers.com/index.php?pagename=HimalayaRomkitchen
the last part
unhide your rom and unlock you rom
copy the cab files to the extented rom dir
edit the txt file to include the new added cab files
and remove the entry for the ones you are removing
hide and lock your rom
and hardreset
Thanks Rudegar
Unfortunately, Ive already tried the unlocker tool (and several different versions of them).
Ive just tried again with the one mentioned (it tells me that the software was written for an older version of windows software), and when i select Unhide, the image turns grey but nothing happens.
When I select unlock, i get an error message and "FL_IOCTL_BDTL_HW_PROTECTION"
When I click OK, i get "- A device attached to the system is not functioning."
Clicking OK again, gives me "extrom unlocked" - but it ISNT unlocked.
Any ideas ?
Thanks
Paul
Also,
As I can see the Ext Rom folder, I tried to edit the config.txt file (just to see if it could be edited).
I got a message "No Storage memory available. Tap Cancel, use File Explorer to delete some files and try again. Or, move the note to an alternative storage location. Tap discard to close the document without sving changes"
If I then try to move or delete the config.txt (or any other) file, I get "The media is write protected"
I then installed the Repart_DOC_with_Default tool to make the Ext Rom file larger.
Unfortunately, I get an error "FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" message and I cannot increase the folder size.
Anyone have any ideas please ?
Thanks
Paul
no if i were you i would try asking or looking in the apline forum because the IIi is alpine and there may be more people there who knows any special things you need to do to unlock alpine devices
Thanks Rudegar
Ive placed a link to this thread in the Alpine section, but as there are so few posts there Im not too hopeful.
Does anyone have any ideas on this please ?
I dont mind paying (or donating) a fair amount in order to get this sorted.
Cheers
Paul
For the mobile that can not unlock by the Extended ROM Unlocker, You have to use the method that DrChair posted here.
You have to find the start point of the ExtROM image which is in Fat16 format, by using Hex Editor and Find "eb fe 90 4d 53 57 49 4e 34 2e 31" (Hex). Copy from this location till 23.2 MB of file size. Open it as virtual disk, then you can do modification.
OMG - I thought things were complicated already.
Surely there must be an easier way to edit Extended Rom on XDA IIi ?
All of the other models appear to have fairly straightforward methods to edit - all except for the XDA IIi
Im afraid all of the link you gave has gone way above my head - it is far too complicated for me.
............
1. First dump your rom to a SD-card, using the well know method.
Which method ? - its not well known to me as i havent found it yet ?
2. Next get the rom to your pc, using ntrw
ntrw ?
3. Using a Hex-editor, copy 2BC019C (HEX) till 3EC019C (HEX) to a file.
ok, i think i will be able to do this.
4. Mount that file as a virtual Harddisk (I use the virtualdisk-plugin for total commander)
??
5. Modify your ExtROM on that Virtualdisk.
ok, i think i know what this means.
6. Umount the Virtualdisk.
??
7. paste the contents of the (modified) file back into the rom-file, at precicly the same position and save it under a different name.
can i do this if the files are write protected ?
8. put the modified rom back onto your SD-card, using ntrw.
? as per 2.
9. Flash your Magician, with the new rom.
Flash ? - and I dont have a Magician, I have an Alpine.
Anyone able to clarify all of this please ??
Paul
Since you are not that technical, I suggest you to forget about it. Or else you may destroy your IIi.
Be understand that architecture of IIi II and Mini are all different. Extended ROM of II is located at DOC (disk on Chip) ROM. But Mini and IIi are not. Mini Extended ROM is located at normal flash memory and not locked READ HERE. I think IIi is the same as Mini. So, wait for some good programmer or hacker to do it. Which may be forever.
You can get some flavour by reading Here. Eventhough you could not read the language, but all the pictures will tell you something.
but it should not be requred to add the stuff to the extented rom to get it to access gprs and mms it's just about putting in the settings
and making sure the right settings are used if there are still
the old settings there
Thanks Guys
I have copied several .cab files onto the PDA for Orange UK Contract settings.
My concerns are that I know the Extended Rom is full of references to O2 and will revert to O2 should I need to hard reset (unless I always keep Orange settings on my MMC).
BUT, Im not convinced that simply clicking onto the Orange .cab files has given me the correct set-up to access GPRS etc - as I cannot access at all.
I keep thinking that somewhere in the darkest depths of the system those original O2 settings are still controlling my PDA.
If someone can confirm for me that by installing and running all of the orange .cab files will indeed set-up the PDA for full Orange access (with no O2 settings running from within the Ext Rom), then I can cope with having to store a copy on my MMC.
Thank very much guys
Paul
if you search the networking forum with the text
GRPS AND <insert your cellphone company>
you are sure to find the right settings plus how to manualy set it up
and when you then sync with activesync you can set it to backup
your settings so if you hardreset you can just restore your backup
and get your settings the way they were
Orange GPRS Settings on 02 xda i
The settings are:-
In New Connections:
SELECT A MODEM = Cellular Line (GPRS)
ACCESS POINT NAME = orangeinternet
USER NAME = Blank
PASSWORD = Blank
DOMAIN = Blank
IN ADVANCED SETTINGS TCP/IP TAB
TICK User server assigned IP address
TICK Use Server Assigned Addresses - SERVERS TAB
You then tap on the G Symbol at the top of the screen and then tap on
Connect GPRS
Two seconds later you are connected.
Thanks Silverhill,
Unfortunately, those setings are already in the PDA and dont connect.
I get a "modem not found" error message.
I can connect with WAP dial-up, but not GPRS.
.....
I have now ordered both O2 AND Orange pre-pay SIM Cards (as they cost less than £10 for the two).
If I do a hard-reset and the O2 SIM doesnt work, I will know the PDA is faulty.
If it works, I can then load the Orange .cab files (after doing a soft-reset during the hard-reset so as not to pre-load O2 from the Ext Rom).
I will then try the Orange Pre-Pay SIM to see if that works.
If it doesnt, it would suggest that the O2 files on the Ext Rom are indeed controlling the settings - even though I stopped them from loading on the reset.
Other than that, I am totally stuffed.
It may be that I have to do a number port of my valuable mobile number and go onto the O2 network.
Cheers
Paul
OK
I received my new Orange PAYG Sim Card, registered it and it worked first time. (I did the same with the new O2 Sim and that worked too.)
Instant GPRS connection - wonderful.
SO, we know that the settings I have on my XDA IIi are correct for Orange and that there isn't any hardware conflict and also that my PDA is not faulty.
A quick phone call to Orange Tech Support AND THEY ASK YOU TO ENTER ALL OF THE SETTINGS AND TELL YOU THE PDA MAY NOT BE COMPATABLE WITH ORANGE !!!!
They really are useless !
I explain (argue) that the PDA must be compatable as the new Orange Sim works fine.
Im told that the only way to check is to go to an Orange Shop and ask them to test my Sim Card in one of their GPRS phones - "which will prove the Sim Card is perfectly OK and the problem is with the PDA" (their words).
I travel 25 miles to a shop and the Sim Card DOES NOT work in their phone.
The assistant offers to call Orange Tech for me to confirm the situation. After being kept on hold for 35 minutes, Orange inform her that my Sim is an older (brown in colour) card and it isnt possible to programme it for newer technologies.
The assistant asks for a new replacement for me and is told that because my PDA is not an Orange supported phone, there is no way for them to run a diagnostic check on it and therefore no way to be 100% sure the Sim is the problem - despite the Orange Sales Assistant confirming it does not work on their GPRS phone.
I am then informed that I can BUY a new Sim Card (blue in colour) for £20 that will work.
At this point I have spent a week trying various settings at home and have stood in the Orange shop for over an hour, so I agree to buy the new card.
Hopefully, it will arrive today or tomorrow and all will be well.
My only "worry" is that I still have all of the O2 settings on my extended rom - so I will keep looking on the forums over the next few months to see if anyone has any better solutions to those currently available.
Thanks everyone for you feedback and assistance.
Paul
buy?
odd when i had my old xda1 stolen i just called my cellphone company
and said it was stolen and they sendt me a new sim card
no charge
same thing had i lost it
Hi Rudegar
Yes - BUY
Ive been an Orange Contract customer for around 9 years (OK, so my monthly bill is only around £3).
They are happy to change my account to Orange World (GPRS enabled) and charge me an extra £4 a month min.
They are told by their own staff that my Sim is actually faulty - the Sim they originally supplied.
They are shown that the XDA IIi is not at fault.
And then they insist on charging me to be able to access the things they are charging me to access.
Like I said, Orange really are a joke.
I have actually placed my mobile phone number (it is pretty special) for sale on ebay http://cgi.ebay.co.uk/Rarely-Availa...429158530QQcategoryZ29781QQrdZ1QQcmdZViewItem
When it sells, I will be moving network and will just go to pre-pay with any bog std number as my call charges and usage are so small.
Thanks
Paul
PS, I hope I wont get told off for plugging my ebay sale.
cant you transfer your nr to your new sim with another company ?
here you can but they take a month to do it guess as a punishment because the thing only takes them 1 sec
SCREAM !!!!!!!
OK, thats out of my system now.
Ive just had the new Orange Sim Card for my contract with them.
Ive tried to register it with them and they REFUSE to pair the new Sim with my XDAIIi
They inform me that because it is a non-Orange phone the insurance would be invalidated - I explained that I do NOT have any insurance to worry about invalidating.
I asked why they were happy to pair a new PAYG Sim Card with the phone a couple of days ago but not my Contract Sim Card.
Their reply was that "by pairing the PAYG Sim and the non-Orange handset, we get new business, but by pairing your contract with a non-Orange phone, we are losing money because you've performed a back-door upgrade".
CAN YOU BELIEVE THESE PEOPLE.
I havent a clue what to do next, as Im getting pretty fed-up of dealing with them.
Paul
lol brand now world where the customer is never right and a bit of a bother
and should count himself lucky that they want to talk to him at all
is at hand
take would take my business elsewhere and never look back
here orange just became more and more unpopular untill they sold their
department to telia and left the country
I've been through the new HTC Operator config software for the UK and extracted all the various cabs that will configure your internet, MMS and connection settings automatically.
I've tested the T-Mobile one and it works fine on WM6 (Black 2.0 specifically
I know there is some software being developed to get this from a central source but I find having a cab I can run much more useful as I can store it on my SD card and restore all the settings even if I'm not near a computer and have had to hard reset
By now, I've flashed so many new ROMs from here that I can remember the details for pretty much everything anyway, but it's always easier getting it done automatically ;-)
Question is - do people want me to post the cabs here for them?
OK, question answered : here they are
yep! that be great!
Hi there,
A set for Orange UK would be fantastic!
I`ve downloaded quite a few but most of them dont work and I end up fiddling with the settings myself until I get it right.
I flashed to WMB2.0 last week and although I THINK everything is ok now, I dont think my MMS is working fully.
Avid
Yeah, that'd be cool. I could put in on my SD and it'd save me running the app.
Nice one lord.
Maximum number of files reached - here's the vodafone one
Enjoy
Thanks dude!
You utter star Lordsmiff, I've been trying to make one of these but not getting too far converting the xml files from the ext rom.
Thank you very much
Italian cabs? Please..... (in the HTC site they call our language ITALIEN, instead of ITALIANO, Europe is far from HTC's headquarter!)
cool. thanks tired of manually entering all my voda settings when i flash.
Great!
For the first time since I bought my Tytn (Novemeber) I can now send and receive MMS on Tmobile.
Thanks a lot.
Rob
Lordsmiff, what a star you are!!! I've been after a T-Mobile one for ages... fantastic
Lordsmiff said:
I've been through the new HTC Operator config software for the UK and extracted all the various cabs that will configure your internet, MMS and connection settings automatically.
...
Click to expand...
Click to collapse
I tried to do the same (running the exe with hermes not connected) but I realized it deletes the cab file from the temp folder.
If you briefly tell me how I would gladly lose some mins to extract some more for other countries.
I'm overwhelmed by the positive response here - thanks everyone I thought it was only me who was getting sick and tired of always manually entering all the connection settings.
I will therefore, have a go at extracting the cabs for the other country's operators, starting with, as requested, ITALIEN ;-)
Watch this space
Italian Operator Cabs
Just store your operator on your SD card and run whenever you need to hard reset or install a new ROM and all your connection settings *should* be back where they belong
Caveat:
I accept no responsibility for these not working - I don't know how to edit them, nor do I know how to create ones for missing operators - I just know where to get them from ;-)
German Operator Cabs
Just store your operator on your SD card and run whenever you need to hard reset or install a new ROM and all your connection settings *should* be back where they belong
Caveat:
I accept no responsibility for these not working - I don't know how to edit them, nor do I know how to create ones for missing operators - I just know where to get them from ;-)
And more...
Spanish Operator Cabs
Just store your operator on your SD card and run whenever you need to hard reset or install a new ROM and all your connection settings *should* be back where they belong
Caveat:
I accept no responsibility for these not working - I don't know how to edit them, nor do I know how to create ones for missing operators - I just know where to get them from ;-)
Lordsmiff said:
Just store your operator on your SD card and run whenever you need to hard reset or install a new ROM and all your connection settings *should* be back where they belong
Caveat:
I accept no responsibility for these not working - I don't know how to edit them, nor do I know how to create ones for missing operators - I just know where to get them from ;-)
Click to expand...
Click to collapse
I've posted in http://forum.xda-developers.com/showpost.php?p=1204903&postcount=5 the correct CAB for Orange Spain, cause the CAB from HTC was bad. Dosn't include the username and pass for connections.
WIKI Updated with individual italian cabs.
http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs
Dutch Operator Cabs
Just store your operator on your SD card and run whenever you need to hard reset or install a new ROM and all your connection settings *should* be back where they belong
Caveat:
I accept no responsibility for these not working - I don't know how to edit them, nor do I know how to create ones for missing operators - I just know where to get them from ;-)
I have been successfully using the Android builds on my TP2 without any issues. However, when I tried Rhobuntu (which is very exciting by the way!), I have had problems since I shut it down to reboot.
When trying to launch any programs that are installed on the SD card, either through a proper cab install or by trying to run Haret off the SD card, I get the following message:
[highlight]
The file 'filename' cannot be opened. Etiher it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
[/highlight]
I am still able to access all the files from Windows Mobile 6.5. I can open data files such as mp3 or jpg.
If I try to install a cab file (from the SD card or the main memory after copying it there), it tells me the file is from an unknown publisher etc, and I can choose to continue. However, it then tells me that the installation was unsuccessful.
Prior to using Rhobuntu, I could install and use applications on the SD card with out any problems.
I have searched the forums and the internet, but I can't find any answers that are applicable - plenty of questions like mine though!
One example is on the first page of the Rhobuntu sticky thread, but it appeared to go unanswered:
http://forum.xda-developers.com/sho...opened+signed+trusted+certificate#post5771699
Help please!
Ed
Ed,
It was I who posted the question in the other thread. Unfortunately, I never got a solution to the problem so I ended up performing a hard reset.
I had the same issue again when I ran Rhobuntu so I've pretty much given up on it.
Sorry I can't be more helpful.
R.
snalbansed said:
I have been successfully using the Android builds on my TP2 without any issues. However, when I tried Rhobuntu (which is very exciting by the way!), I have had problems since I shut it down to reboot.
When trying to launch any programs that are installed on the SD card, either through a proper cab install or by trying to run Haret off the SD card, I get the following message:
[highlight]
The file 'filename' cannot be opened. Etiher it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
[/highlight]
I am still able to access all the files from Windows Mobile 6.5. I can open data files such as mp3 or jpg.
If I try to install a cab file (from the SD card or the main memory after copying it there), it tells me the file is from an unknown publisher etc, and I can choose to continue. However, it then tells me that the installation was unsuccessful.
Prior to using Rhobuntu, I could install and use applications on the SD card with out any problems.
I have searched the forums and the internet, but I can't find any answers that are applicable - plenty of questions like mine though!
One example is on the first page of the Rhobuntu sticky thread, but it appeared to go unanswered:
http://forum.xda-developers.com/sho...opened+signed+trusted+certificate#post5771699
Help please!
Ed
Click to expand...
Click to collapse
make Hard-reset . (you will lost all you data on the phone)
Works after hard-reset
Thanks dicko, walter.
I finally gave up and did a hard reset, and before setting everything up again I tried Rhobuntu again, like dicko had.
This time, I can use Rhobuntu, and go back to Windows, and everything still works. Phew!
Differences between last time and this - I don't know if any of them are relevant:
1/ This time the Windows only has stock Vodafone ROM Win 6.5 plus TomTom as it automatically installed when I put the SD card in. Last time lots of other programs were installed also.
2/ This time I used the latest Rhobuntu release - 19032010 on the fileshare, 18032010 according to the first post that the filed share was linked from. It was xfce. Last time I was using 12032010.
3/ This time I chose Reboot when I was finished with Rhobuntu. Last time I chose Shutdown.
Now to rebuild my Windows system!
hi guys, i currently have a stocked rom DHD but due to work purpose, i need to access places tat has high security with restriction on camera phone thus i need to take out my sim card and place it into a simple normal phone. i cant find any function for me to transfer the contacts to sim and i tried apps like contacts2sim and copy to sim. they both dont work. any advise pls??
Ummm. Why start the same thread in two forums .... ?
Dave
Contact2Sim Pro
More info
With my account i dont use same sim and its work
Then probably it can be work with sim blocked or unused
I dont have other sim or sim blocked but you can try
Just put sim and conect with your account on apps
Then unplug sim and samapps work
If I am not wrong @adfree did that somthing like 3 month ago...
Sent from my MAGPAD9.7 SuperPlus using xda app-developers app
Can't remember. But I think I have no solution yet without SIM.
Btw.
I can't see solution in Video.
How ?
Best Regards
I think he used which I used many time ago trick.First time download something from samsungapps and when finished switch off your phone and extract your SIM and open your phone you will able to use Samsung apps without SIM
Maybe I am wrong
You mean only first time SIM is needed to write few Config data...
Then SIM is not more mandatory?
Best Regards
adfree said:
You mean only first time SIM is needed to write few Config data...
Then SIM is not more mandatory?
Best Regards
Click to expand...
Click to collapse
Now just extract firmware again and compare it with virgin firmware use Winmerge (can compare folder)
I think its because im connected first time with sim with my acount then unpluged sim and can use samapps
Maybe difference its account information and not easy to push it all ready on new firmware because account differ
Also you can try exec simapps with simcard and not connected with your account and try again connect samapps without sim if works then we find how make firmware who can connect withtou simcard
Or maybe its just some file changed like info in Kona bin(exxemple) when i use sim and connect with account then just need copy past it on new firmware...
KonaTermsInfo.ini
Code:
#Terms
Version=1.1.5
#Country
mcc=262
mnc=1
csc=DBT
Maybe this is the "magic"...
I am too lazy now to remove my SIM...
My Fingers tooo big.
Best Regards