Develop Bugs

New Software Available from VZW 5.10.605.9 12/12/2011

software update, 5.10.605.9; Radio:
20.32W.30.0813U_1.09.01.1111
Looks like a new radio too.
http://support.verizonwireless.com/pdf/system_update/incredible2.pdf
Security Features
+ Includes Google BT/DigiNoTar security patch.
+ Includes Google security patch for upgrading libpng to 1.2.46.
+ Includes Wi-Fi password security patch.
Device Features
+ Support local video playback when in Airplane Mode.
+ 5 bar Received Signal Strength Indicator (RSSI) support.
+ Improvements to Clock and Alarm features.
+ The “Disable While Roaming” selection will work accurately when
roaming in Canada.
+ Update Sync & Connect configuration to enable Push email sync
during off-peak hours.
Sorry there is a duplicate thread in the General forum. I only searched to see if there is already a post in the development thread.
I did not provide this, but here is the link to the radio. Thanks to adrynalyne.
MD5: 700956620392e953b212c85510788795
http://forum.xda-developers.com/showpost.php?p=20279858&postcount=14

Still do not update to sense 3.0 ....

I just want someone to tear out the radio and give me a flashable zip. I'm running android 4.0 so I could care less about the rest of the update.

dankblaze said:
I just want someone to tear out the radio and give me a flashable zip. I'm running android 4.0 so I could care less about the rest of the update.
Click to expand...
Click to collapse
which ics are you running? the beta in the developers section ?
ok i see it on your signature !!!!

I'm rooted and wouldn't mind keeping it up to date (especially the radio), just wondering about if ill lose root. Anyone take the dive yet?
Sent from my ADR6350 using Tapatalk

I'll wait to flash a new radio. I'm sure it will be extracted and uploaded here soon.

I am so tempted to run the new OTA, but I would want quick access to an XTC clip to unlock my bootloader in case anything went as VZW planned.
As in VZW would rather we keep our bootloader locked.
Any one see the Red DInc II avail any more.
Looks like we got the limited edition of the RED Droid Incredible 2.
It's so funny that the Vortex is still going for $79.
That phone must be SPECIAL...
As in VZW tries to pedal cheap junk for more than it's worth.

Yeah, I am hopeful that we get a flashable zip of the radio. Don't forget to check the MD5 sum & have a good flash (when it becomes available).

Look in the thread in the general section. Radio but no md5.

AgalychnisCallidryas said:
Look in the thread in the general section. Radio but no md5.
Click to expand...
Click to collapse
It's there now...
700956620392e953b212c85510788795
And it's good...

cac2us said:
I am so tempted but I would want quick access to a clip in case anything went as VZW planned.
Any one see the Red one avail any more.
Looks like we got the limited edition.
It's so funny that the Vortex is still going for $79.
That phone must be SPECIAL...
Click to expand...
Click to collapse
I absolutely have no idea what you are talking about or how it relates to this thread.

dankblaze said:
I absolutely have no idea what you are talking about or how it relates to this thread.
Click to expand...
Click to collapse
Please re read my post.
I expanded it (my post) so it relates to this thread..

Has anyone with root tried doing the OTA?
I'm running rooted stock (RMK's rooted ROM from the previous OTA).
is anyone packaging this update as a flashable ROM?
I would if i knew how to do that magic stuff.

poncho524 said:
Has anyone with root tried doing the OTA?
I'm running rooted stock (RMK's rooted ROM from the previous OTA).
is anyone packaging this update as a flashable ROM?
I would if i knew how to do that magic stuff.
Click to expand...
Click to collapse
cwr will block the ota from installing if you try

The radio installs fine from the posted zip no problems.

I installed the radio just fine as well but I don't see a difference in signal strength. I'm running CM7 and I still see 4 signal bars.

findthisfunny said:
i installed the radio just fine as well but i don't see a difference in signal strength. I'm running cm7 and i still see 4 signal bars.
Click to expand...
Click to collapse
a radio will not give you the 5 bars!!

andybones said:
a radio will not give you the 5 bars!!
Click to expand...
Click to collapse
well maybe if you wish really hard

If you wish upon a radio...

Radio seems to have helped me. I am getting service in my normal dead spots. I guess I won't be as frustrated with big red.
Sent from my ADR6350 using xda premium

[ROM][ICS 4.0.4][KOODO]SGH-T989D Stock ROM

Haven't seen anyone shared this yet.
Here's the KOODO ICS 4.0.4 stock ROM I used CWM to flash to stock after I tried the custom ROM.
https://sourceforge.net/projects/koodostock/files/KOODO_SGH-T989D_Stock_Signed.zip/download
I also flashed DARKSIDE.SUPER.WIDE before I flashed this or you can used CWM Recovery 6.0.1.2 to wipe system and cache.

lypang said:
Haven't seen anyone shared this yet.
Here's the KOODO ICS 4.0.4 stock ROM I used CWM to flash to stock after I tried the custom ROM.
https://dl.dropbox.com/u/83026541/KOODO_SGH-T989D_Stock_Signed.zip
I also flashed DARKSIDE.SUPER.WIDE before I flashed this or you can used CWM Recovery 6.0.1.2 to wipe system and cache.
Click to expand...
Click to collapse
Interesting, how does this compare to the Telus ICS stock ROM? Is there anything additional it has that Telus doesn't? I assume this would work with any of the ICS radios as well?

Chochiwpg said:
Interesting, how does this compare to the Telus ICS stock ROM? Is there anything additional it has that Telus doesn't? I assume this would work with any of the ICS radios as well?
Click to expand...
Click to collapse
I also tried the TELUS stock myself and didn't feel any difference. I flashed the modified TELUS radio and it was working fine.

Thanks a lot! Is it rooted? Is the radio included?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

How did you dumped the firmware? is there a way to have a stock recovery flashable?

Chochiwpg said:
Interesting, how does this compare to the Telus ICS stock ROM? Is there anything additional it has that Telus doesn't? I assume this would work with any of the ICS radios as well?
Click to expand...
Click to collapse
Read that it was the exact same thing minus the boot logo. I have no idea from a dev standpoint though... interested to know if it has a different radio on it since all the Telus ones don't seem to agree with my phone.

tsuda said:
Thanks a lot! Is it rooted? Is the radio included?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Not rooted, you can use the S2 Toolkit to root.

pyfviperx said:
How did you dumped the firmware? is there a way to have a stock recovery flashable?
Click to expand...
Click to collapse
This is just a CWM backup converted to a CWM flashable zip. I don't think you can flash with the stock recovery.

Digital1325 said:
Read that it was the exact same thing minus the boot logo. I have no idea from a dev standpoint though... interested to know if it has a different radio on it since all the Telus ones don't seem to agree with my phone.
Click to expand...
Click to collapse
From the android version history 4.0.4 only have the following features:
- Stability improvements
- Better camera performance
- Smoother screen rotation
- Improved phone number recognition
So, not a lot of changes from 4.0.3 but the stability improvements might be an important one.
As for radio I think it was the same as TELUS but I can't tell now as I flashed mine shortly after I got the phone and didn't make a backup.
Would be nice if someone with the KOODO phones can let us know.

If someone can debloat this, include Super User and couple of scripts to make this a smooth ride, i would be interested in flashing it.

There is an unofficial changelog here:
http://forum.xda-developers.com/showthread.php?t=1481044
Noticeably Faster
Android OS bug fixed (in battery stats)
Long-pressing on a blank spot on the last page of app tray bug is gone
New Radios. 3G/4G switching MUCH better. Don't even notice it changing.
Improved signal strength
New Power Menu. New from 4.0.2, familiar to those who have used a stock 4.0.3 rom. Screenshot here
PRIMELA03 Bootloader
Faster boot up time
Auto-brightness Functionality changed. Smooth transition
Holding down camera button now refocuses again
Multitouch issue seems resolved. Screenshot here
Autorotate is faster
Browser performance noticeably improved
Recent apps list opens faster
Miscellaneous camera UI changes
Increased volume
Keyboard fixes
Updated News & Weather app UI
Improved quick controls in browser. New when coming from 4.0.2. Present in 4.0.3. Screenshot here (Update: 02/05)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

What are the steps in flashing this?? I just have the stock rooted tmobile 4.0.3. Do you need a rotation fix or any sort of extra zip after flashing the rom?? I want to try it if its a stock 4.0.4
Sent from my SGH-T989

I had no idea koodo even offered the t989. They mostly carry low end phones besides the iPhone and that will run you $500 on the tab. To the point though, I imagine its identical to the telus version as they are a sister company
Sent from my SGH-T989 using xda app-developers app

lypang said:
From the android version history 4.0.4 only have the following features:
- Stability improvements
- Better camera performance
- Smoother screen rotation
- Improved phone number recognition
So, not a lot of changes from 4.0.3 but the stability improvements might be an important one.
As for radio I think it was the same as TELUS but I can't tell now as I flashed mine shortly after I got the phone and didn't make a backup.
Would be nice if someone with the KOODO phones can let us know.
Click to expand...
Click to collapse
It's 4.0.4?! Nice! This should make a great base for our devs!

noodles2224 said:
What are the steps in flashing this?? I just have the stock rooted tmobile 4.0.3. Do you need a rotation fix or any sort of extra zip after flashing the rom?? I want to try it if its a stock 4.0.4
Sent from my SGH-T989
Click to expand...
Click to collapse
These are the steps that I took to flash this;
1. Flash DARKSIDE.SUPER.WIPE or use the new CWM 6.0.1.2 to wipe ROM
2. Flash Radio [I used the one from DARKSIDE.TLLE4]
3. Flash Stock ROM
4. Wait 10 minutes after reboot [I waited 2 minutes and it was fine]

I was thinking about giving this one a try, since I normally run the Telus stock as my daily, but that has some issues with compass and its 4.0.3.
Thanks for posting this.
Also, Koodo just started offering the T989D.

I think it just need to be rooted and deodexed, I don think here is a radio included though

Koodo is Telus's discount brand. I doubt there's more bloat that on Telus ROMs, must be the same, except the 4.0.4 part

lypang said:
Haven't seen anyone shared this yet.
Here's the KOODO ICS 4.0.4 stock ROM I used CWM to flash to stock after I tried the custom ROM.
https://dl.dropbox.com/u/83026541/KOODO_SGH-T989D_Stock_Signed.zip
I also flashed DARKSIDE.SUPER.WIDE before I flashed this or you can used CWM Recovery 6.0.1.2 to wipe system and cache.
Click to expand...
Click to collapse
The link has been supsend. Is any link I can download the rom?

I wander if TDJ would we willing to do his magic on this Rom?

[Q] Tethering on rooted stock AT&T Galaxy 3?

Hello,
I did a search, but the only reference to tethering seem to involve custom ROMs. I have rooted the stock phone and need to use wifi tethering for my Win8 tablet. Is this possible? I tried turning on tethering in the phone settings, but it says to contact AT&T. So I downloaded a wifi tethering program, but no wifi hot spots show up on my tablet.
Any help is greatly appreciated!

spdivr said:
Hello,
I did a search, but the only reference to tethering seem to involve custom ROMs. I have rooted the stock phone and need to use wifi tethering for my Win8 tablet. Is this possible? I tried turning on tethering in the phone settings, but it says to contact AT&T. So I downloaded a wifi tethering program, but no wifi hot spots show up on my tablet.
Any help is greatly appreciated!
Click to expand...
Click to collapse
there are touchwiz-based roms (if you prefer that look/style) in the Android Development section and AOSP-based roms in the Original Android section. look over both sections to see what you might like. read up. most touchwiz roms have been modified and have native tethering. tethering is also standard on the AOSP roms.
installing a custom recovery and rom are covered in the attached directions. cheers
http://forum.xda-developers.com/showthread.php?t=2179330

If u want to stay on stock and WiFi tether try barnacle. You won't be able find it play store but with some Google searching u can find the apk
Sent from my SAMSUNG-SGH-I747 using xda premium

Pbwizkid said:
If u want to stay on stock and WiFi tether try barnacle. You won't be able find it play store but with some Google searching u can find the apk
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Yes, I'd like to stay on stock, so I'll look for barnacle. Thanks!

Keep in mind to some providers can track it and will charge u or shut off data till u add feathering to ur plan. I have been doing it on ATT with no issue but I have had friends on provider like straight talk that have experienced this
Sent from my SAMSUNG-SGH-I747 using xda premium

Got Barnacle but it's not working. Says "Wifi: Could not set ad-hoc mode of wlan0: Operation not supported on transport endpoint". I suspect it's some monkeying around by AT&T...

I already told you that you can find a stock based rom in the Android development section that has tethering established on it. That feature will be listed among the other features in the rom OP. Do some reading/research for yourself if you truly want tethering instead of leaning on a half-baked app supplied by someone who's intel comes from straight talk friends. These developers are on this site for a reason...they're the best. Cheers

What's the ROM version on your phone? Flashable mods have been made for all the stock ROMs...

Assuming you're on the stock AT&T 4.1.1 release, you'll need to flash a modified framework-res.apk in order to tether.
Sent from my SAMSUNG-SGH-I747 using xda premium

Im also on a rooted but stock ATT rom. Foxfi worked until the jellybean update. What changes when you flash the modified framework?

billinaz said:
Im also on a rooted but stock ATT rom. Foxfi worked until the jellybean update. What changes when you flash the modified framework?
Click to expand...
Click to collapse
You need to post your ROM version, so we can find you correct MOD...

Yea, I guess that would help.
Its on 4.1.1 with kernel 3.0.31-274808
[email protected]#1
SMP PREEMPT
Build number
JR003L.I747UCDLK3

billinaz said:
Yea, I guess that would help.
Its on 4.1.1 with kernel 3.0.31-274808
[email protected]#1
SMP PREEMPT
Build number
JR003L.I747UCDLK3
Click to expand...
Click to collapse
I'm looking man... The search is trash with broad topics like this, it just reorganizes the threads... So far I've found flashable mods for LEM and LG1... I thought someone made it for LK3...
---------- Post added at 11:53 PM ---------- Previous post was at 11:42 PM ----------
Wow... XDA search is absolute trash... all it did was reorganize the threads... Would you have a problem with flashing a stock ROM with the mods you need?

Thanks for the help. Ive been running up against a brick wall on this.

billinaz said:
Thanks for the help. Ive been running up against a brick wall on this.
Click to expand...
Click to collapse
Well people built flashbale mods to enable it for I thought was all the SW versions, I only found older sw versions... Are you opposed to flashing a whole ROM?

No, Im not opposed to flashing a new rom.
I wont loose anything by doing that right?

billinaz said:
No, Im not opposed to flashing a new rom.
I wont loose anything by doing that right?
Click to expand...
Click to collapse
Edit - Found what you needed in the next post

Here's the mod for LK3:
http://forum.xda-developers.com/showthread.php?t=2029983

Got it working!
I reinstalled jelly bean and used that mod, it worked!
THANKS

spdivr said:
Yes, I'd like to stay on stock, so I'll look for barnacle. Thanks!
Click to expand...
Click to collapse
i once was like you and afraid to convert but i have flashed cm 10.1.2 and i have to tell you im exstaticly happy with the results this is so much better than AT&T's garbage rom version and the cookies over here are delicious ... you simply have to consider it just read about it ...

Got tmo leaked 4.3 up and running but need wifi

I GOT A TMO 4.3 UPDATE UP AND RUNNING AND WAS WONDERING IF ANYONE KNOW WHERE THE WIFI FILES ARE LOCATED OR CAN DIRECT ME IN THE RIGHT DIRECTION TO GET WIFI WORKING?
ANY HELP OR GOOD RESPONSE IS GREATLY APPRECIATED
Tj.......................

re: 4.3 leak
badboytw said:
I GOT A TMO 4.3 UPDATE UP AND RUNNING AND WAS WONDERING IF ANYONE KNOW WHERE THE WIFI FILES ARE LOCATED OR CAN DIRECT ME IN THE RIGHT DIRECTION TO GET WIFI WORKING?
ANY HELP OR GOOD RESPONSE IS GREATLY APPRECIATED
Tj.......................
Click to expand...
Click to collapse
Where exactly did you find and download the leaked 4.3 TMO rom?
Was it an ODIN flashable TAR file or a cwm/twrp custom recovery zip file rom?
Either way most likely it's never going to have wifi unless you are a developer.
In order to get the wifi working with some leaked rom you flashed it will take a
lot more than just copying some files into your phone.
I just wonder if your rom came from the "Samsung Galaxy S 4 i9500, i9505, i9505G " forum?
In any case good luck with it!

Misterjunky said:
Where exactly did you find and download the leaked 4.3 TMO rom?
Was it an ODIN flashable TAR file or a cwm/twrp custom recovery zip file rom?
Either way most likely it's never going to have wifi unless you are a developer.
In order to get the wifi working with some leaked rom you flashed it will take a
lot more than just copying some files into your phone.
I just wonder if your rom came from the "Samsung Galaxy S 4 i9500, i9505, i9505G " forum?
In any case good luck with it!
Click to expand...
Click to collapse
Thx and i got the Dump from http://androidfannetwork.com/2013/10/12/android-4-3-system-dump-for-t-mobile-samsung-galaxy-s4-leaked/ and only way i got the Dump to work was to do a overwrite on a i9505 system and KToonz Kernel was just for speed

badboytw said:
Thx and i got the Dump from http://androidfannetwork.com/2013/1...m-dump-for-t-mobile-samsung-galaxy-s4-leaked/ and only way i got the Dump to work was to do a overwrite on a i9505 system and KToonz Kernel was just for speed
Click to expand...
Click to collapse
Can u post a flash able zip?
Sent from my SGH-M919 using XDA Premium 4 mobile app

that is the same dump that was posted in our General Forum.

elesbb said:
that is the same dump that was posted in our General Forum.
Click to expand...
Click to collapse
yea but was wondering if i could get wifi to work or would i need to wait til 18th?

badboytw said:
yea but was wondering if i could get wifi to work or would i need to wait til 18th?
Click to expand...
Click to collapse
Its working fine for me if you set the flashable zip file up correctly and are using a proper kernel. The only issue i am having with my 4.3 ROM is the stupid network loosing signal on sleep. I'm 99.9 percent convinced this is due to not having the upgraded radio.

elesbb said:
Its working fine for me if you set the flashable zip file up correctly and are using a proper kernel. The only issue i am having with my 4.3 ROM is the stupid network loosing signal on sleep. I'm 99.9 percent convinced this is due to not having the upgraded radio.
Click to expand...
Click to collapse
thats funny bc its everything is working 99% but just no wifi lol my data nvr drops
bc this 4.3 MI9 is stock rooted but trying to figure where or what i went/did wrong!
mind pm'ing what you got so i can see what im missing or doing wrong?

badboytw said:
thats funny bc its everything is working 99% but just no wifi lol my data nvr drops
bc this 4.3 MI9 is stock rooted but trying to figure where or what i went/did wrong!
mind pm'ing what you got so i can see what im missing or doing wrong?
Click to expand...
Click to collapse
So even on 4G when the screen shuts off you don't loose cell network?

elesbb said:
So even on 4G when the screen shuts off you don't loose cell network?
Click to expand...
Click to collapse
nope, i get 4G and LTE just fine no issues pm me ur rom and ill send mine so you can take a look maybe we can fix something and mayb someone or a Dev can get this out as a rom for TMO b4 the 18 bc i knw ppl want to be on 4.3 not use International Rom

elesbb said:
So even on 4G when the screen shuts off you don't loose cell network?
Click to expand...
Click to collapse
how is your WIFI working and mine isnt?

I told you before. You have to use talexop or faux kernel for wifi to work. If you want to switch kernels then flash echoe rom wifi fix.
Sent from my SGH-M919 using Tapatalk

wicked v9 rom help

hi im a complete noob and would like to install wicked rom v9 on my tmobile galaxy s4 could ask on the rom forum because i dont have the privileges or what ever so if some one can help me out it would be very kind of you. and with a video tut. even better i know the basic but with that 4.3 base band thing i need to flash i dont get it i flashed the rom but wiffi is not working and some one told me to flash the 4.3 baseband or what ever so please help

technolize32 said:
hi im a complete noob and would like to install wicked rom v9 on my tmobile galaxy s4 could ask on the rom forum because i dont have the privileges or what ever so if some one can help me out it would be very kind of you. and with a video tut. even better i know the basic but with that 4.3 base band thing i need to flash i dont get it i flashed the rom but wiffi is not working and some one told me to flash the 4.3 baseband or what ever so please help
Click to expand...
Click to collapse
I had the same problem. Did you flash the mobin.bin via odin & changed the bulid.prop? That's what helped me.

This is how you get the mk2 baseband: http://forum.xda-developers.com/showthread.php?t=2544612
Sent from my SGH-M919 using XDA Premium 4 mobile app

Saturny said:
I had the same problem. Did you flash the mobin.bin via odin & changed the bulid.prop? That's what helped me.
Click to expand...
Click to collapse
Which Modem.bin and change which build.prop line to what? Your instructions are vague

52635596
If you are able to make phone calls, I wouldn't worry about the baseband version. And as for the wifi, first go download any build.prop editor via play store (considering you are rooted) and locate ro.securestorage.support. Then just change it from True to False. Save and reboot after and the wifi should be fixed.

hi thanks all you guys for your help.:laugh: well i got the 4.3 baseband flashed thanks to Karakoram2 took a couple of tries but it finally sticked and my phone baseband now reads M919UVUEMK2. so im currently using wicked v8 because when i flash v9 even now with the correct baseband "hopefully" the rom still doesn't work right. wifi is still not working and if i let the phone sleep the screen wont turn on again and yes the phone is still on it just refuses to display the lock screen all i get is a black screen, and if i try to reboot it just gets stuck on samsung logo so i saw SupraLek's coment about changing the build.prop and should i do it before i flash the rom or after. like i said running v8 at the moment

The new 9.1 update will work without the need to change anything
Sent from my SGH-M919 using XDA Premium 4 mobile app

Just thought I share if your having wifi problems try flashing the ktoonez kernal. I did that instead of going into build prop and my wifi is working great. No problems here. Found the download link in the wicked v9.1 forum on page 909 or 910. Sorry new to the forum and don't know how to share that link but it worked.
Sent from my SGH-M919 using xda app-developers app

The new v9.1 you should not have to edit buildprop, flash different kernel or anything as it has been fixed
☞ Sent from here☜???