Related
Hello and thank you ahead of time for reading my thread. I spent a good deal of time searching for solutions in your forums but couldn't find anything related, so apologies if this is a repost.
I recently flashed my stock htc incredible with the leaked 2.2 ROM. While the flashing and installation of the new OS was successful, the phone itself is now acting really weird.
First, it is incredibly slow. There is a noticeable lag between the time I touch the screen and the time the touch actually registers. For example, to dial a number, I have to long press every button for it to register.
The second and much more annoying issue is the phone starts doing all sorts of things on its own. When sending a text message for example, all these keys are randomly pressed, it goes to the desktop, back to sending a text, inputs all these random characters, and sometimes frustratingly on occasion sends the text message on its own. This happens on and off and I haven't been able to figure out what triggers.
My question is, what can I do to fix it? I've reinstalled the ROM several times already and the problems appear every single time.
If I can't fix it, I'd love to go back to my previous stock rom and just wait for HTC's update.
Your help is greatly appreciated it.
Thanks.
have you cleared data and cache? do you have clockworkmod recovery install? please go through all the steps you went through to install the 2.2 leak
If ur rooted then u have clockworkmod installed...you should do a factory reset thru clockworkmod and wipe all data and cache ...
Then after that perhaps try a good and stable ROM ..
Wow thank you for such a prompt response.
I followed the steps in this thread:
[ROM]Leaked Stock 2.2 with Sense [LEAKED ROM - SOME BUGS!!]
(it's on the development front page, I would post a link but since I am a new member I am not allowed to).
In summary, I first updated to Radio version indicated in that thread (version 2).
I then ran unrevoked 3 which installed clockworkmod recovery. Then, I did a wipe. After, in the recovery screen I installed from the zip file of the mod that was in my SD card.
This is all I have done to date.
gxs1 said:
Wow thank you for such a prompt response.
I followed the steps in this thread:
[ROM]Leaked Stock 2.2 with Sense [LEAKED ROM - SOME BUGS!!]
(it's on the development front page, I would post a link but since I am a new member I am not allowed to).
In summary, I first updated to Radio version indicated in that thread (version 2).
I then ran unrevoked 3 which installed clockworkmod recovery. Then, I did a wipe. After, in the recovery screen I installed from the zip file of the mod that was in my SD card.
This is all I have done to date.
Click to expand...
Click to collapse
Okay...good to go.
You should boot into recovery aka clockworkmod...
Then do factoryreset wipe cache and data...
And I would recommend u install a ROM that u would like and u should be fine.
if ya like sense do skyraider....if ya like vanilla do CM6 test 8....and ya should be okay
If ya get stuck feel free to pm me and I can give u my Gtalk and can help furthur if ya need.
Cheers
I was having this problem too. I solved it by cleaning the screen and making sure my hands werent sweaty before use. I think thays why it didnt register the touch
Sent from my ADR6300 using XDA App
jdkoreclipse said:
I was having this problem too. I solved it by cleaning the screen and making sure my hands werent sweaty before use. I think thays why it didnt register the touch
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
These were my thoughts too initially but I've checked and double checked and cleaned the screen thorouhgly.
gxs1 said:
These were my thoughts too initially but I've checked and double checked and cleaned the screen thorouhgly.
Click to expand...
Click to collapse
With an eyglass cleaninn cloth? That worked for me.
I first came across the problem while testing the rom i made, jdfroyo, so initially thought it was my rom. I wiped my hands (which were sweaty) and then thoroughly cleaned my phone off. I havent had issues since.
Sent from my ADR6300 using XDA App
gxs1 said:
These were my thoughts too initially but I've checked and double checked and cleaned the screen thorouhgly.
Click to expand...
Click to collapse
I have heard that cleaning screen with a certain product (don't remember if it was like soap or alcohol) is not recommended as it leaves an almost invisible layer and can send it to that whacko stage of doing weird stuff. Double check on that... Otherwise, I am with the others > Wipe data/cache > then do a ROM re-flash.
tats_06 said:
I have heard that cleaning screen with a certain product (don't remember if it was like soap or alcohol) is not recommended as it leaves an almost invisible layer and can send it to that whacko stage of doing weird stuff. Double check on that... Otherwise, I am with the others > Wipe data/cache > then do a ROM re-flash.
Click to expand...
Click to collapse
You are very very right!
The screen is not his issue...noobness is jke ...I am helping him on Gtalk ..
Cheers and Olta u are far from ur home
Hi,
Thanks all for your help. And thanks to acid for helping me out on gtalk.
After trying several different ROMs, my phone continues to be really laggy. For example, I can type an entire word in the keyboard before it appears on the screen, and usually only the first few letters register.
I think my screen is just malfunctioning and it happened to coincide with the day I flashed my phone so I am just going to do a warranty exchange.
Thanks again everyone!
Just loaded the AOSP rom for ECO5 love the ROM ....kudos to anderson and all his hard work. I was just curious was any one else having a problem with their home button on their phone? Both of mine on the touch part of the screen and the home button on the key pad dont work??? any ideas???
brnttoast9 said:
Just loaded the AOSP rom for ECO5 love the ROM ....kudos to anderson and all his hard work. I was just curious was any one else having a problem with their home button on their phone? Both of mine on the touch part of the screen and the home button on the key pad dont work??? any ideas???
Click to expand...
Click to collapse
i have two.
1.bad flash = redownload the file, wipe, and flash rom 2x in a row.
2.bad phone = ODIN back to stock to see if you have same problem. if not go back to 1, if yes go to sprint store
brnttoast9 said:
Just loaded the AOSP rom for ECO5 love the ROM ....kudos to anderson and all his hard work. I was just curious was any one else having a problem with their home button on their phone? Both of mine on the touch part of the screen and the home button on the key pad dont work??? any ideas???
Click to expand...
Click to collapse
Sounds like a bad flash or hardware issues, if you want you could odin back to stock completely and check whether the issue persists or not.
Sent from my SPH-D700
thanks for the heads up im trying both idea now..... maybe i should take it into sprint and show them what a real phone does...
ac16313 said:
Sounds like a bad flash or hardware issues, if you want you could odin back to stock completely and check whether the issue persists or not.
Sent from my SPH-D700
Click to expand...
Click to collapse
+1
if it did this on your last rom, or across multiple roms, u have a hardware problem. if u redownload your rom, them wipe cache and dalvik 3x ea, then flash on top of your existing rom, it could clear that up. if not, try a 3x data wipe before reflashing rom.
OK, so I am not new to the xda desire scene,
(Despite the fact that I can't post in the rom development thread regarding this issue)
I have tried installing this Rom in as many different ways as I can over the past 3 hours:
Using EXT3 rather that EXT4
Changing Hboots
Making sure that I have got the correct download (a2sd+/D++)
Wiping a billion times over
etc etc.
HOWEVER no matter what I do I cannot get this Rom to function
When I boot up for the first time, I just get a wallpaper and notification bar.
No touch screen response/button response.
Only the power button works as a method of turning the screen on/off
I assume from experience at this point in first boot HTC's setup program
(or whatever it is) should start and guide me through
linking up accounts/inputting Wifi keys etc.
I have scoured the rom thread and others regarding rom problems and nobody seems to have had this problem of the Setup manager not starting.
As nice as the Gingerbread Screen On/Off animation is I would prefer to do abit more with my phone
I hope I have posted in the right section and I would very much appreciate it if anyone who has had this experience could help me fix this problem and get a working phone...
(ps. The Rom looks very good, if only I could get it working)
First of all try to redownload the rom!!!
And double check the md5
Swyped from my CM7.1 Desire using XDA Premium App
timmaaa said:
And double check the md5
Swyped from my CM7.1 Desire using XDA Premium App
Click to expand...
Click to collapse
halaros2 said:
First of all try to redownload the rom!!!
Click to expand...
Click to collapse
Hey Thanks guys, but..... I re-downloaded the ROM both versions 1.5 and 1.7 (since 1.5 is thought to be more stable) :/ and get stuck at exactly the same place :SSS I'm am abit baffled since I change Rom's alot and have never experienced this before
Did you wipe dalvik? btw your sd card partion need to be at least 1 gigabyte. It worked for me i had same issue as you. First post on XDA
My first installation of 1.7 didnt work and I had to pull the battery and I thought the same thing was happening with my second try, as the screen just went blank after all the crazy changing shapes that happen during boot. However once I touched the power button the setup menu appeared.
I thought this was strange as every other ROM I have tried went straight from the boot animation to the phone starting without the screen blanking out. I know this doesn't help solve your problem but it might mean something to somebody else, who can then help you further.
ps I have been running the ROM for the past week and I haven't had a screen freeze yet. Which has been a revelation for me, as every other ROM ive tried has been really bad for this.
JIUI JB, JIUI v4 & JWP7 BUG REPORT​
Hi everyone Janeindiran here. This thread is mainly to track bugs only. So if you have any issue regarding the ROM please post in this thread. Please read the RULES before posting
Rules:
- If you want to report a bug, please include BUG REPORT keyword before reporting your bug.(This will make my work a bit easier).
- If you have any queries, please include Q keyword before posting your query.
- If you have any other issues, please be specific.
Download Links
APN & Baseband
Baseband switcher will not change my baseband and also, no APN's, I've tried APN backup & restore and it will not work, also tried adding APN's manually and this rom will not save them.
Cheers
Edit- Forgot to mention that the TWRP Recovery you link to will not install. Just get an error message.
samorgs said:
APN & Baseband
Baseband switcher will not change my baseband and also, no APN's, I've tried APN backup & restore and it will not work, also tried adding APN's manually and this rom will not save them.
Cheers
Edit- Forgot to mention that the TWRP Recovery you link to will not install. Just get an error message.
Click to expand...
Click to collapse
Both works fine on my mobile. Try configuring APN manually. You should enter Name and APN. Without entering the name you can't save it. TWRP link will be changed.
janeindiran said:
Both works fine on my mobile. Try configuring APN manually. You should enter Name and APN. Without entering the name you can't save it. TWRP link will be changed.
Click to expand...
Click to collapse
I have tried configuring APN manually but it will not save them.
Sent from my MB525 using xda premium
samorgs said:
I have tried configuring APN manually but it will not save them.
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
Ok. Three things are necessary to config APN. Name, APN, Port only these are important. Enter these values and try. I didn't modify anything related to network and configuring manually works just fine on my device
janeindiran said:
Ok. Three things are necessary to config APN. Name, APN, Port only these are important. Enter these values and try. I didn't modify anything related to network and configuring manually works just fine on my device
Click to expand...
Click to collapse
Already tried all that, I have entered all the info required for the APN settings i need and click on save but it will not save them, still comes up with no APN's. Tried baseband switcher and it does not work, also tried flashing via TWRP my baseband files still get nothing. This is the only rom i have tried that has this problem.
Cheers
samorgs said:
Already tried all that, I have entered all the info required for the APN settings i need and click on save but it will not save them, still comes up with no APN's. Tried baseband switcher and it does not work, also tried flashing via TWRP my baseband files still get nothing. This is the only rom i have tried that has this problem.
Cheers
Click to expand...
Click to collapse
I have attached few shots. Please see. Do you have network signal? Are you able to make calls??
janeindiran said:
I have attached few shots. Please see. Do you have network signal? Are you able to make calls??
Click to expand...
Click to collapse
No I can't make calls, and no I do not have a network signal. You first screenshot is what my APN look like, nothing there, I click on new APN put in the settings then select save and it does not save, still ends up like the first screenshot with no APN's in there.
Getting very frustrating trying to fix the problem, have gone back to WIUI until a fix may be found if some one else has the same trouble.
Cheers
samorgs said:
No I can't make calls, and no I do not have a network signal. You first screenshot is what my APN look like, nothing there, I click on new APN put in the settings then select save and it does not save, still ends up like the first screenshot with no APN's in there.
Getting very frustrating trying to fix the problem, have gone back to WIUI until a fix may be found if some one else has the same trouble.
Cheers
Click to expand...
Click to collapse
Which version of WIUI are you using?? I tried the new GB version its full of bugs and it has the problem with baseband switcher v4.0. I guess its an issue with the baseband switcher. Try older versions. New release is under testing and bit more stable one
janeindiran said:
Which version of WIUI are you using?? I tried the new GB version its full of bugs and it has the problem with baseband switcher v4.0. I guess its an issue with the baseband switcher. Try older versions. New release is under testing and bit more stable one
Click to expand...
Click to collapse
I'm using stable 2.5.27 GB version. Flashing yours over this.
Cheers
Sent from my MB525 using xda premium
samorgs said:
I'm using stable 2.5.27 GB version. Flashing yours over this.
Cheers
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
Let me know whether it worked. Baseband Switcher doesn't work on that ROM too
janeindiran said:
Let me know whether it worked. Baseband Switcher doesn't work on that ROM too
Click to expand...
Click to collapse
I'm giving up on this one, tried flashing with earlier verions of both WIUI and MIUI all I get with that is an error when installing TWRP. TWRP installs but when I try to reboot into it I get an error message, all I can do from there is reboot into stock recovery wipe data/cache then boot into BL and reflash stock sbf.
Cheers
i used JWP7 v.1.0.1 (the "stable" GB version) and it takes, LITERALLY 15 minutes to boot up. and then too its just a blank screen with nothing on it apart from the wallpaper. i can pull down the notification bar and thats it. none of the buttons work, there arent any icons either.
i rebooted to see if it makes a difference but nope. same thing. got tired witing for it to boot up and shut it down
jayeshrc said:
i used JWP7 v.1.0.1 (the "stable" GB version) and it takes, LITERALLY 15 minutes to boot up. and then too its just a blank screen with nothing on it apart from the wallpaper. i can pull down the notification bar and thats it. none of the buttons work, there arent any icons either.
i rebooted to see if it makes a difference but nope. same thing. got tired witing for it to boot up and shut it down
Click to expand...
Click to collapse
What device? What was your previous ROM? Did you wipe data, cache, dalvik cache??
janeindiran said:
What device? What was your previous ROM? Did you wipe data, cache, dalvik cache??
Click to expand...
Click to collapse
defy, red lens.. yeah i wiped everything, redid it.. went back to stock, rerooted, and tried again and ended up the same
jayeshrc said:
defy, red lens.. yeah i wiped everything, redid it.. went back to stock, rerooted, and tried again and ended up the same
Click to expand...
Click to collapse
Its because of CWM. Flash some CM9 ROM and try flashing this. It will work fine.
First of all, great work. I was afraid to try this because it installs TWRP. Does TWRP support CWM flashable zips? Or how can I go back to another rom if I want?
Coming to the rom itself, installed easily, first boot in 3 mins. Was laggy for some time, then became smooth. The rom is smooth overall except for the launcher. Swiping between screens was always a bit laggy. But I hate MIUI launcher anyway, so installed Apex Launcher and it was really smooth.
Also the default theme has some problem, i.e at many places it's white text written on a white background so that it is impossible to read. This is the only real complaint I have. There have been some random FCs and 1 hotboot, but overall, good work
ashikns said:
First of all, great work. I was afraid to try this because it installs TWRP. Does TWRP support CWM flashable zips? Or how can I go back to another rom if I want?
Coming to the rom itself, installed easily, first boot in 3 mins. Was laggy for some time, then became smooth. The rom is smooth overall except for the launcher. Swiping between screens was always a bit laggy. But I hate MIUI launcher anyway, so installed Apex Launcher and it was really smooth.
Also the default theme has some problem, i.e at many places it's white text written on a white background so that it is impossible to read. This is the only real complaint I have. There have been some random FCs and 1 hotboot, but overall, good work
Click to expand...
Click to collapse
Thanks for trying. Theme is under development so it has that issue. Yes TWRP recovery is similar to CWM. It is better than CWM. You can flash anything like in CWM
Been some more hours trying your rom. There are occasional hotboots. But apart from that when I try to view a contact from the dialer screen(using t9 search), I get FC(contacts and dialer has stopped working). Also the music player stops playing after 1 or 2 seconds when connected to headset. The latter bug I've seen in Wajk too.
ashikns said:
Been some more hours trying your rom. There are occasional hotboots. But apart from that when I try to view a contact from the dialer screen(using t9 search), I get FC(contacts and dialer has stopped working). Also the music player stops playing after 1 or 2 seconds when connected to headset. The latter bug I've seen in Wajk too.
Click to expand...
Click to collapse
Try JIUI 2.6.15 it is stable. I tried a different combination of ROM's so its having few issues. JIUI 2.6.15 has more features that are not in the new version.
Q&A for ||ROM|| JEDI Open Source Project || 4.4.4 || MultiWindow || 10|04
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Not sure this is possible...
First, this is an outstanding job! I am in love with this rom so far, and made an account just to subscribe to this thread. I don't want to miss what you guys have in store!
But, I have a question, many apps on the store that I used to use (artflow, photoshop touch) require a "tablet device". These would work using stock, and worked using stock or Cyanogenmod for Note 2, but somehow that isn't triggering with this rom.
I mean, I'm sticking with this as my daily driver so far, regardless. I just used both those apps a lot.
Thanks for this amazing rom, it breathed new life into my phone!
Oograh said:
First, this is an outstanding job! I am in love with this rom so far, and made an account just to subscribe to this thread. I don't want to miss what you guys have in store!
But, I have a question, many apps on the store that I used to use (artflow, photoshop touch) require a "tablet device". These would work using stock, and worked using stock or Cyanogenmod for Note 2, but somehow that isn't triggering with this rom.
I mean, I'm sticking with this as my daily driver so far, regardless. I just used both those apps a lot.
Thanks for this amazing rom, it breathed new life into my phone!
Click to expand...
Click to collapse
It may be the DPI setting by default but not sure. I would try changing DPI to 480, download apps and put DPI back. You can do this via build.prop or using an LCD density changer app
Sent from my A0001 using XDA Free mobile app
ptmr3 said:
It may be the DPI setting by default but not sure. I would try changing DPI to 480, download apps and put DPI back. You can do this via build.prop or using an LCD density changer app
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
That was it! Thank you so much!!!
Galaxy Gear Neo on Jedi 4.4.4
ANy help would be appreciated in getting my Gear Neo to work on this Rom.
Anyone know how to increase the incall volume?
Ptmr3 will have this issue fixed on the next update but I don't want to flash a different temp rom until new update is available.
I like this rom a lot.
Can someone help?
AE74 said:
Anyone know how to increase the incall volume?
Ptmr3 will have this issue fixed on the next update but I don't want to flash a different temp rom until new update is available.
I like this rom a lot.
Can someone help?
Click to expand...
Click to collapse
Normally the temp fix is to push vol down, then volume up when in a call.
kozmo21 said:
Normally the temp fix is to push vol down, then volume up when in a call.
Click to expand...
Click to collapse
Tried that already.
I have installed exdialer app. This app works if I am calling but not when receiving the call.
Anyone have any issues with the loss of data? Been running flawless for me up until the last 2 days. A reboot fixed it the first and second time but last night no matter what I did I could not get data back. Had to revert back to CM11.. if anyone has the reason/solution I'd love to go back.. I'll try to ready the thread fully if I get time today at work. Just seeing if anyone else experienced the same thing
Sent from my SGH-T889 using XDA Free mobile app
Is this ROM compatible with the AT&T version of the Note 2 (i317)? I've read good things about the ROM and am eager to try it, but would prefer to know beforehand.
Vibration doesn't work for me
Sent from my SGH-T889 using XDA Premium 4 mobile app
ProfeKarma said:
ANy help would be appreciated in getting my Gear Neo to work on this Rom.
Click to expand...
Click to collapse
Anybody??
ProfeKarma said:
Anybody??
Click to expand...
Click to collapse
I am pretty sure that you need a Touchwiz rom to have compatibility, otherwise it would be compatible with all android phones and not just Samsung Galaxy variants.
Hmm cleaned flashed the ROM twice now with gapps and cannot for the life of me get Bluetooth to work .. Tried to connect to car Bluetooth with the right passcode but it just will not connect
Edit: OK as long as the device doesn't require a passcode it will connect hmm how strange
phone restarts
Anyone have this problem? Phone keeps restarting when I try to change a contacts picture on the native contacts app (people app)
Wiped cache and dalvik doesn't solve the problem
edit: phone also restarts when i change wallpaper/lockscreen wallpaper but the changes to wallpaper and lockscreen wallpaper does stick, but the contacts picture changes doesn't stick.
Since having xposed installer enabled , and only greenify module checked on .. For some reason if I boot into recovery from the power menu it will boot loop on twrp 2.8.0.1.. Then will have to Odin and clean flash all over again .. 4 times now and still can't figure out why that happens .. Maybe xposed installer is the cause? So I decided to turn off the phone then hold up vol up power and home key to get to recovery but it loads the twrp screen then reboots the OS .. Not sure just what to do or about recovery.. Also made a full backup and changed cache, system, and data to f2fs format and restored to that system .. Could that be an issue as well?? Anyone please give an insight to this would be greatly appreciated
Edit: also running latest CM Agni kernel to support f2fs format
LaZiEebOi said:
Since having xposed installer enabled , and only greenify module checked on .. For some reason if I boot into recovery from the power menu it will boot loop on twrp 2.8.0.1.. Then will have to Odin and clean flash all over again .. 4 times now and still can't figure out why that happens .. Maybe xposed installer is the cause? So I decided to turn off the phone then hold up vol up power and home key to get to recovery but it loads the twrp screen then reboots the OS .. Not sure just what to do or about recovery.. Also made a full backup and changed cache, system, and data to f2fs format and restored to that system .. Could that be an issue as well?? Anyone please give an insight to this would be greatly appreciated
Edit: also running latest CM Agni kernel to support f2fs format
Click to expand...
Click to collapse
u might want to try to update twrp 2.8.1.0, I kept having boot loops at every reboot and had to pull battery. I dont know if it might help u, but it did fix the boot loops i kept having.
How do I turn off multi window? I keep getting a split screen with out an option to close one of the screens. Everything from woot to Amazon app.
I have installed Jedi Master 18 but the air menu function wills pen isn't working.
Sent from my SGH-T889 using XDA Free mobile app
I got a question ( tried the search function...didn't work). Sometimes when my phone goes to sleep, whether I lock it or it locks itself. It won't wake up... Tried the home button and power button and they won't wake it up from its deep sleep. The only thing that works is to pull the battery and that's a pain in the butt cause of my otter box case I have to take apart 2-4 times a day....love this rom but if I can't get this issue fixed I'm going back to liquid rom...thx in advance
Sent from my SGH-T889 using XDA Premium 4 mobile app