Develop Bugs

CWM Freeze on reBoot, Odin no Dice

When I tried to switch from ACS EI22 4 to 5 my phone force close looped because of some issue with launcher pro. I went to reflash the rom from CWM and ever since my phone won't properly load roms from CWM. When the phone has a custom rom it boots right to CWM when I power them up only to freeze again when I try to boot the rom from recovery.
I have Odined to stock EC05, and one click flashed CWM. I have flashed pre-rooted EC05 roms. I Odined to EI22 & EC05 modem Tar and went on to install ACS recovery over CWM.
I have Odined multiple times on multiple stock roms and custom roms. The problem persists. Once I'm in recovery (I've tried 3 versions) and I click "reboot" the phone locks with a black screen with the home buttons on or an image of the clockwork logo (depending on which version I'm trying).
The strange thing is, all of the stock roms work just fine and I was able to install EI22 from OTA with no problems. But who wants that icky CIQ? or Sprint nascar/football/bloatware? Yuck!
I've had some limited success with simple pre-rooted deodex etc roms I flash from Odin, but sometimes recovery loads when I power up the phone. And sprint keeps wanting to force the update on me.
Does anyone have any suggestions? I've tried everything I can think of and have searched, to no avail, for a solution.

Does anyone think this is a hardware issue? One of the kernels I tried on ACS 5 was a beta.
If so, how should I go about getting it fixed since it is under warranty. I do have accidental damage coverage.

Most likely not hardware related. I say that because you said you can run stock just fine.
I would try the new CWM5 just released and see if the problem is still there.

Disregard post
Sent from my SPH-D700 using xda premium

Neckberg said:
Most likely not hardware related. I say that because you said you can run stock just fine.
I would try the new CWM5 just released and see if the problem is still there.
Click to expand...
Click to collapse
That's what I thought and why I continued to Odin and one-click root different types of CWM and ACS recovery.
I'm going to see if the repair store nearby can run a diagnostic. Otherwise I'm going to stay away from any modifications that require me to use CWM for anything since I was able to Odin a custom rom (but it was EC05).
Hopefully Samsung will release the EI22 modem tar and someone will release a pre-rooted version that I can Odin.

I tried odin flashing different recoveries yesterday. Odin gave them a pass but they wouldn't boot from the 3 finger salute (like they didn't install).
I've never tried to install CWM this way so I'm not sure if you need to be rooted before hand or you need a specific kernel.

osiris2600 said:
I tried odin flashing different recoveries yesterday. Odin gave them a pass but they wouldn't boot from the 3 finger salute (like they didn't install).
I've never tried to install CWM this way so I'm not sure if you need to be rooted before hand or you need a specific kernel.
Click to expand...
Click to collapse
So it goes back into stock recovery with 3 finger? Easiest fix is Odin in a prerooted EC05 ROM tar like EC05plus then flash a Gingerbread ROM then flash the modem delta.
Sent from my SPH-D700 using XDA App

kennyglass123 said:
So it goes back into stock recovery with 3 finger? Easiest fix is Odin in a prerooted EC05 ROM tar like EC05plus then flash a Gingerbread ROM then flash the modem delta.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Yes it goes into stock recovery. Unfortunately flashing in CWM has been the problem that lead me to flashing CWM through Odin. For more detail see the original post. Whenever I try to flash something through CWM the recovery has problems and it fails to load the rom that is installed.
I'm trying as many alternatives to pinpoint the problem. I'm going to try switching SD cards and see if the problem resulted from some kind of data corruption there. Should have an update on that sometime tonight.
If I can't figure out and fix the problem I'll be at the mercy of sprint or if I want root I'll have to wait for a pre-rooted EI22 rom complete with modem tarball so I can odin that.

I saw the OP but didn't see where you Odin'd a prerooted EC05 ROM like EC05plus. Then flash a GB ROM right after. Just 2 steps. Then if you want the modem one more step to flash the delta. It's worth a shot?
Sent from my SPH-D700 using XDA App

kennyglass123 said:
I saw the OP but didn't see where you Odin'd a prerooted EC05 ROM like EC05plus. Then flash a GB ROM right after. Just 2 steps. Then if you want the modem one more step to flash the delta. It's worth a shot?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I can't flash from CWM no matter how CWM gets on my phone. I tried exactly what you said. My original post says I Odined multiple stock and custom roms. I didn't get around to CWM flashing on a different card tonight, finals got me busy busy.
Enjoy your turkey day!

osiris2600 said:
I can't flash from CWM no matter how CWM gets on my phone. I tried exactly what you said. My original post says I Odined multiple stock and custom roms. I didn't get around to CWM flashing on a different card tonight, finals got me busy busy.
Enjoy your turkey day!
Click to expand...
Click to collapse
Thanks, you too.
So if Odining the EC05Plus ROM didn't get you a working 3 finger salute CWM, then maybe you should try ROM Manager and downloading CWM 5.X.
http://forum.xda-developers.com/showthread.php?t=1357655

It must be a hardware problem. I can odin a rom with CWM and it will boot fine. However if I ever try to open CWM the rom will never load again as the phone boots to recovery and get's stuck there.
I confirmed this by Odin flashing and then going into clockwork and not even flashing anything and it got stuck. Flashing in CWM will actually install things as I can change CWM within CWM but I still get stuck when trying to load the rom.
So the only way for me to enjoy a rooted phone is to refrain from CWM recovery.
I went back to a EH17 odined pre-rooted rom. When EI22 gets a modem tar hopefully someone will make a pre-rooted, deodexed, zipaligned odin tar (and if I'm lucky, CiQ will be removed).
Otherwise I'd like to get a replacement but explaining the problem to sprint is kind of a catch 22 since the issue only appears when I load a custom recovery.

How about flashing CWM 5.027 and downloading ROM Manager and installing 5.027 through that as well. Rom Manager actually downloads the CWM 5 and keeps it packed on your sd card and installs it everytime you use it. It allows ROM Manager to be able to update the CWM whenever a new version comes out.

Install custom recovery only

When I install a rom with stock recovery (CM9 alpha 2 for instance), how do I get back the custom recovery in order to update the rom to the next version without having to use Odin to get back to an older rom with a custom recovery and wipe my data, then install the new version of the rom I want. Is there a better way to do this?

Use Auto Root, Mobile Odin, or Odin to install GB-based CWM.

iamamutt said:
When I install a rom with stock recovery (CM9 alpha 2 for instance), how do I get back the custom recovery in order to update the rom to the next version without having to use Odin to get back to an older rom with a custom recovery and wipe my data, then install the new version of the rom I want. Is there a better way to do this?
Click to expand...
Click to collapse
Don't use any of the ics kernels repacked with rogue or cwm unless you hate your phone and need some bricks around the house
Sent from my SPH-D710 using Tapatalk 2 Beta-5

Go into download mode and use Odin into EL29 or EL26 you can do it for any ROMs that don't come with cwm recovery
Epic touch phone of xXHELLBoy91Xx

I keep an MD5 of a stock rooted EL29 and gunslinger kernel on my SD card and just use Odin Pro to flash it all at once from my phone. When thats done, just CWM back into recovery and flash whatever new rom you want.

Okay I found this from the blog post:
Stock android recovery is still being used in the ROM. This is for your protection, so you don't brick your phone due to all the people whom have flashed an ICS kernel, bricking when flashing a rom, wiping, etc. If you would like to backup or restore, or do any flashing, please go back to an ELXX gingerbread kernel, and do it from there.
Click to expand...
Click to collapse
Does this mean I can just flash future upgrades through the stock recovery if I already have alpha 2 installed?

Sorry bit isn't there a video and full write up on the first page on what to do. Just follow OP directions all will be well.
Sent from my SPH-D710 using Tapatalk

iamamutt said:
Okay I found this from the blog post:
Does this mean I can just flash future upgrades through the stock recovery if I already have alpha 2 installed?
Click to expand...
Click to collapse
No it means cwm is bricking phones on ics kernels so it will not be included in the ROM until it's fixed ....if you want to do anything flash a GB kernel with cwm el26 ...it won't boot ics so go right into recovery
Sent from my SPH-D710 using Tapatalk 2 Beta-5

[Q] CWM Recovery not sticking

CWM Rogue Recovery doesn't seem to be sticking on my E4GT. Flashed CM9 Alpha 3 from stock rooted rom. When Alpha 4 was released, I tried to boot into CWM Recovery and ended up with stock recovery. Ended up having to odin back to stock and start over to get Alpha 4 running. Same problem now that Alpha 5 is out there, tried to boot into CWM Rogue Recovery and get stock recovery.
Doing a search shows that this seems to occur on other phones. They've resolved it by deleting a boot recovery file with Root Explorer. I was just hoping to confirm with someone that this method will work on the E4GT and the name and location of the file that needs to be deleted.
I'm assuming I'll have to odin back to stock and start the process over again and delete that file once I load up CWM Rogue Recovery again?
Thanks for the help.

CM9 comes with stock recovery. Look up EL26 kernel and learn to use it. Its your best friend for flashing on this phone. Also read up a little more on CM9 as it explains this.

This method will not work. With our phone, recovery has to be packed into the kernel, its not separate from other partitions like it is on other phones. This is why whenever you flash a new rom, your current recovery is replaced by the new roms packed in recovery. The reason its stock Android recovery is because of the bricking issue we've been having in ICS custom recovery so devs aren't including it into the kernel<rom.
So when you need CWM, flash the directboot CWM under the tools page in the epic4g touch CM blog spot website. You Odin that and it takes you straight to a sage recovery where you can flash the alpha 5 update. Understand?
Sent from my SPH-D710 using Tapatalk

Thank you both for pointing me in the right direction. I realized that I would have to go back to the EL26 to flash new roms. I didn't realize that I would have to do that to flash over an existing rom with an update. Thanks for setting me straight.

hmmm....interesting. The CM9 instruction page does not mention that you need to Odin the DirectBoot CWM when upgrading. I can see why a lot of people are skipping that step.
Thanks for the heads up, I am going to upgrade to alpha 5 after work. I'll make sure to Odin the DirectBoot CWM kernel first.

mjs2011 said:
I can see why a lot of people are skipping that step.
Click to expand...
Click to collapse
It is a new kernel modification that did not exist a couple weeks ago. The EL26 CWM kernel itself has been around since the end of last year. Being completely optional to use the new modded one you probably wont find it in instructions. I for example will never use it but others will find it easier because they do not understand why the phone goes into bootloops.

[Q] Installing ICS CWM

I just upgraded my E4GT Sprint from GB to ICS using the oneclick installer. I am trying to install the CODENAME rom from CWM but havng issues getting CWM installed. I used the the E4GT auto but FE16 isnt listed so i tried FE15 but it wont load into CWM. So i tried this link "http://forum.xda-developers.com/showthread.php?t=1390393" and flashed from ODIN and it goes into CWM but before it boots it says my phone is a gt-i9100 and has a ! on the bottom. It appears to boot though so i booted back into CWM and tried to flash the ZIP for CODENAME and the gapps file and it jsut gets stuck at the boot screen with the transformer logo. I cant get into CWM after that point and have to ODIN back to ICS. I am on ICS now and its working fine. Does anyone have any instructions on getting CWM installed and the codename rom from a fresh odin ICS install?

mazdaspeed6 said:
I just upgraded my E4GT Sprint from GB to ICS using the oneclick installer. I am trying to install the CODENAME rom from CWM but havng issues getting CWM installed. I used the the E4GT auto but FE16 isnt listed so i tried FE15 but it wont load into CWM. So i tried this link "http://forum.xda-developers.com/showthread.php?t=1390393" and flashed from ODIN and it goes into CWM but before it boots it says my phone is a gt-i9100 and has a ! on the bottom. It appears to boot though so i booted back into CWM and tried to flash the ZIP for CODENAME and the gapps file and it jsut gets stuck at the boot screen with the transformer logo. I cant get into CWM after that point and have to ODIN back to ICS. I am on ICS now and its working fine. Does anyone have any instructions on getting CWM installed and the codename rom from a fresh odin ICS install?
Click to expand...
Click to collapse
You really should read more before hopping around like that without checking. Real risk for a brick here.
-Flash EL26 stock CWM kernel via the PDA option in ODIN/Mobile ODIN
-When phone begins reboot, Hold Power + Volume up until boots into recovery.
-Wipe data/factory, cache and dalvik cache
-Flash ROM
-Flash Gapps
-Reboot
Those are the instructions right from the developer's thread. This is an AOSP rom and it sounds like you're trying to install TW kernels.
http://forum.xda-developers.com/showthread.php?t=1662295
This is the kernel repository. It links to each kernel where you can read further and find out if they are safe for flashing things.

Seems like you've done a bunch of stuff. But you really should do a whole bunch of reading first or you will brick your phone.
My suggestion would be to use sfhub's one-click http://forum.xda-developers.com/showthread.php?t=1705730 to get to a fully stock rooted device. Then use his autoroot package http://forum.xda-developers.com/showthread.php?t=1342728 to add CWM (the lates in the package is FF11+CWM Agat I believe) then you can add Agat's latest kernel with CWM http://forum.xda-developers.com/showthread.php?t=1721065
But I would be very careful when flashing ANY ROM; use the developers prefered method. Some recommend using EL26 CWM. Some a different recovery or procedure. Be especially careful with CM9 and AOKP builds to follow the directions there.
Good luck

So while i was waiting for a response i just went back to the stock GB using the one click install. I then used the autoroot package to install CWM and then restored my nandroid backup before i made in the very beginning. So my phone is back to a perfect state with GB and CWM installed. Can i just flash the ROM from CWM as is then? For some reason i thought it had to be "converted" to ICS and thats what started this whole mess. Things have changed since my old Evo
I just noticed that im running EL29 not 26...does that matter? When i try to flash that CMW EL26 stock root is when it gave me that gt-i9100 on boot and the ! at the bottom. Using the autoroot and choosing the EL29 Rogue is the only way i got it installed.

mazdaspeed6 said:
So while i was waiting for a response i just went back to the stock GB using the one click install. I then used the autoroot package to install CWM and then restored my nandroid backup before i made in the very beginning. So my phone is back to a perfect state with GB and CWM installed. Can i just flash the ROM from CWM as is then? For some reason i thought it had to be "converted" to ICS and thats what started this whole mess. Things have changed since my old Evo
I just noticed that im running EL29 not 26...does that matter? When i try to flash that CMW EL26 stock root is when it gave me that gt-i9100 on boot and the ! at the bottom. Using the autoroot and choosing the EL29 Rogue is the only way i got it installed.
Click to expand...
Click to collapse
My friend some good suggestions above your post. Give yourself a day or two and do some reading prior to flashing. This way you may not end up at Sprint making up stories about why your phone wont boot up.

Let me just echo what everybody else has said, you're gotta read more. A lot more! If you're one goal is to get CNA in your phone I would recommend reading all of the very first post on that thread. They give step by step instructions.
If you need CWM there are several options to get it on your phone. Both sfhub and I have put together several one-click and automated options to get it on your phone.
One thing that hasn't been suggested yet but I would strongly encourage you to do is to read the "How Not To Brick Your E4GT" thread. It's sticked in the General section.
Good luck!

Two more things.
1) If you're going to ask for help give it a few minutes before trying something new. It takes people a minute to reply. Sometimes waiting that extra minute or two is all you need to be saved from bricking.
2) Don't be afraid to hit your thanks button for everyone who has offered advice already. I got them once for you but it might not hurt to do it again.

[Q] Phone Won't Boot Into CWM Recovery

So, I have flashed CWM Recovery and CWM Touch Recovery onto my Epic 4G Touch. Rom Manager says both are installed. However, when I boot into recovery, I get the stock recovery. I've searched and searched and all I have found are people who aren't pushing the right buttons and others with junk answers that are no help at all, like instructions on how to flash the recovery.
Even if I reflash using Rom Manager or any other recovery installer, it boots to the stock recovery. It's as if any changes to the file system are being completely ignored.
The weird thing is, if I flash StockCWM-EL26 or rogue_ET-recovery-1.2.2-FB27-rc0 using Odin/Mobile Odin and get to whichever one I flashed once, then either the phone won't boot at all or subsequent reboots result in the stock recovery once again.
To reiterate, I have *no* problem booting the phone and I have *no* problem getting to recovery... it's the wrong recovery, but still.
Oh, and I'm using HyDrA ROM.

Wrong forum. Report your post & ask mods to move your thread here.

MistahBungle said:
Wrong forum. Report your post & ask mods to move your thread here.
Click to expand...
Click to collapse
That forum is for the Epic 4G. My phone is not the Epic 4G, it is the Epic 4G Touch.

Try here then (doesn't belong here regardless).

WARNING do not use rom manager. Use odin or mobile odin. You have a high risk of bricking using rom manager. Take a look at some how-to's in this section.
sent from MY BAD A$$ ET4G

patrao_n said:
WARNING do not use rom manager. Use odin or mobile odin. You have a high risk of bricking using rom manager. Take a look at some how-to's in this section.
sent from MY BAD A$$ ET4G
Click to expand...
Click to collapse
^^^^^ this been there done that

patrao_n said:
WARNING do not use rom manager. Use odin or mobile odin. You have a high risk of bricking using rom manager. Take a look at some how-to's in this section.
sent from MY BAD A$$ ET4G
Click to expand...
Click to collapse
As I said, it either works once and never again or never at all no matter what I use to flash it.

Venum's Hydra rom? Wow, talk about a flash back..
Anyway, have you tried the el26 kernel one click?

No, but I don't imagine it would be any different than the Odin flash.
At any rate, I have an addendum. Flashing Rogue 1.2.2, the one that works - I can't get 1.5.0 to work at all (no boot, no recovery, only download mode), doesn't magically disappear, but it doesn't mount my external SD card and I can't open System Settings/Storage - I just can't win.

Would you mind listing the steps of flashing and items being flashed?
Only reason a custom won't stick is that you're flashing something behind it. In my mind at least..

First Time
<Download Mode>
Flash EL26 CWM Recovery - Phone no longer boots to OS. Can only get to CWM Recovery or Download Mode.
<Recovery Mode>
Wipe.
Flash HyDrA twice as per instructions.
Flash GApps.
Flash Multi-DPI Play Market while I'm at it.
Reboot.
Setup ROM.
Attempt to get to Recovery - got stock recovery.
Decided to try again without wiping. Same results.
Decided to try something:
<Download Mode>
Flash EL26 CWM Recovery - Phone no longer boots to OS. Can only get to CWM Recovery or Download Mode.
<Recovery Mode>
Made a NAND backup of /system and /data.
Flash HyDrA twice as per instructions.
Flash CWM Touch Recovery - Recovery takes effect immediately.
Restore the NAND backups.
Reboot.
Attempt to get to Recovery - got stock recovery.
Another thing:
<Download Mode>
Flash Rogue recovery.
Reboot.
Attempt to get to Recovery - got Rogue recovery - So far so good.
Flash CWM Touch Recovery - Recovery takes effect immediately.
Reboot.
Attempt to get to Recovery - got Rogue recovery - Interesting, but I can only access the external SD card from Recovery.
Flashed back to EL26.
Reinstalled HyDrA.
Restored the NAND backups.
(The Touch Recovery version is 5.8.1.5).
ROM Manager
Attempt to flash either CWM Recovery or CWM Touch Recovery.
Reboot.
Attempt to get to Recovery - got stock recovery.
Here is a list of my apps if you want that, too.
https://www.dropbox.com/s/k67l6mb294ruyug/apps-list.txt
I'm hesitant on trying anything else because it's a pain to restore it if I can't boot to the OS.

Just went back to Venums thread.
:edit: Briefly reading the thread, you'll need to have and AOSP kernel to run the Rom, so no, EL26 will not work.
:2d edit: This is out of the second post in that thread. - *If you are restoring a nandroid that you backed up via the above process, you will need to wipe cache and dalvik, then flash an AOSP ICS kernel or the ROM wont boot because it is backed up with the EL26 kernel. Then reboot.
Hydra comes with FD26 kernel. As per the OP.
I don't know, and haven't tested, if Hydra will run with EL26 cwm. But you need to add that to the last step.
But that's why you're going back to stock. It's part of the package.
Please, please, please; STOP using Rom Manager to flash a recovery.
I see a AOSP/TWRP repack by Times Infinity in the Kernel Repo that you could try, But I have not read the Hydra thread to see if Venum had tested this prior to discontinuing support.

egingell said:
No, but I don't imagine it would be any different than the Odin flash.
At any rate, I have an addendum. Flashing Rogue 1.2.2, the one that works - I can't get 1.5.0 to work at all (no boot, no recovery, only download mode), doesn't magically disappear, but it doesn't mount my external SD card and I can't open System Settings/Storage - I just can't win.
Click to expand...
Click to collapse
The easiest thing to do is find the EL29 auto boot recovery... goes straight into recovery after you flash it thru Odin.. check RWilco's repository

bilgerryan said:
The easiest thing to do is find the EL29 auto boot recovery... goes straight into recovery after you flash it thru Odin.. check RWilco's repository
Click to expand...
Click to collapse
From what I'm gathering from his OP, he wants to have a custom after flashing Hydra.. Gonna have to be an AOSP repack to run with a custom. I didn't really gather that until he listed the flashing steps he's doing.

MoHoGalore said:
I see a AOSP/TWRP repack by Times Infinity in the Kernel Repo that you could try, But I have not read the Hydra thread to see if Venum had tested this prior to discontinuing support.
Click to expand...
Click to collapse
I downloaded one, I haven't tried it.
I take it back, I did try it, but it wouldn't install. FF18 Rev2, for the record.
MoHoGalore said:
bilgerryan said:
The easiest thing to do is find the EL29 auto boot recovery... goes straight into recovery after you flash it thru Odin.. check RWilco's repository
Click to expand...
Click to collapse
From what I'm gathering from his OP, he wants to have a custom after flashing Hydra.. Gonna have to be an AOSP repack to run with a custom. I didn't really gather that until he listed the flashing steps he's doing.
Click to expand...
Click to collapse
Right. And I would have no problem just reflashing EL26 /w CWM if it would actually boot into the OS.

egingell said:
I downloaded one, I haven't tried it.
Right. And I would have no problem just reflashing EL26 /w CWM if it would actually boot into the OS.
Click to expand...
Click to collapse
Yeah, anything that's not an AOSP kernel/recovery isn't gonna work. So, if Time's aosp repack doesn't work, you'll have to run the included kernel.

MoHoGalore said:
Yeah, anything that's not an AOSP kernel/recovery isn't gonna work. So, if Time's aosp repack doesn't work, you'll have to run the included kernel.
Click to expand...
Click to collapse
Odin wouldn't install it, if that makes a difference. It's not that the install failed and I had to start over, again.

Well, since my touch isn't my daily use phone at the moment, I'll test that setup tonight.

I decided to try the One-Click of the FF18 v2 kernel and it flashed successfully.
However, as with Rogue, I only have no external SD card and no access to Settings/Storage. TWRP is pretty, but if I can't use my SD card, I'd rather use the stock kernel.

egingell said:
I decided to try the One-Click of the FF18 v2 kernel and it flashed successfully.
However, as with Rogue, I only have no external SD card and no access to Settings/Storage. TWRP is pretty, but if I can't use my SD card, I'd rather use the stock kernel.
Click to expand...
Click to collapse
My apologies on not getting back with you on this last night.
But the SD issue is also seen on the repacks with JB. Depending on when and how FF18 v2 was built (without source at the time?) could be similar to the issues with current repacks.
I'd have to refer those issues/questions to Agat or Garwynn..