When I tried to switch from ACS EI22 4 to 5 my phone force close looped because of some issue with launcher pro. I went to reflash the rom from CWM and ever since my phone won't properly load roms from CWM. When the phone has a custom rom it boots right to CWM when I power them up only to freeze again when I try to boot the rom from recovery.
I have Odined to stock EC05, and one click flashed CWM. I have flashed pre-rooted EC05 roms. I Odined to EI22 & EC05 modem Tar and went on to install ACS recovery over CWM.
I have Odined multiple times on multiple stock roms and custom roms. The problem persists. Once I'm in recovery (I've tried 3 versions) and I click "reboot" the phone locks with a black screen with the home buttons on or an image of the clockwork logo (depending on which version I'm trying).
The strange thing is, all of the stock roms work just fine and I was able to install EI22 from OTA with no problems. But who wants that icky CIQ? or Sprint nascar/football/bloatware? Yuck!
I've had some limited success with simple pre-rooted deodex etc roms I flash from Odin, but sometimes recovery loads when I power up the phone. And sprint keeps wanting to force the update on me.
Does anyone have any suggestions? I've tried everything I can think of and have searched, to no avail, for a solution.
Does anyone think this is a hardware issue? One of the kernels I tried on ACS 5 was a beta.
If so, how should I go about getting it fixed since it is under warranty. I do have accidental damage coverage.
Most likely not hardware related. I say that because you said you can run stock just fine.
I would try the new CWM5 just released and see if the problem is still there.
Disregard post
Sent from my SPH-D700 using xda premium
Neckberg said:
Most likely not hardware related. I say that because you said you can run stock just fine.
I would try the new CWM5 just released and see if the problem is still there.
Click to expand...
Click to collapse
That's what I thought and why I continued to Odin and one-click root different types of CWM and ACS recovery.
I'm going to see if the repair store nearby can run a diagnostic. Otherwise I'm going to stay away from any modifications that require me to use CWM for anything since I was able to Odin a custom rom (but it was EC05).
Hopefully Samsung will release the EI22 modem tar and someone will release a pre-rooted version that I can Odin.
I tried odin flashing different recoveries yesterday. Odin gave them a pass but they wouldn't boot from the 3 finger salute (like they didn't install).
I've never tried to install CWM this way so I'm not sure if you need to be rooted before hand or you need a specific kernel.
osiris2600 said:
I tried odin flashing different recoveries yesterday. Odin gave them a pass but they wouldn't boot from the 3 finger salute (like they didn't install).
I've never tried to install CWM this way so I'm not sure if you need to be rooted before hand or you need a specific kernel.
Click to expand...
Click to collapse
So it goes back into stock recovery with 3 finger? Easiest fix is Odin in a prerooted EC05 ROM tar like EC05plus then flash a Gingerbread ROM then flash the modem delta.
Sent from my SPH-D700 using XDA App
kennyglass123 said:
So it goes back into stock recovery with 3 finger? Easiest fix is Odin in a prerooted EC05 ROM tar like EC05plus then flash a Gingerbread ROM then flash the modem delta.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Yes it goes into stock recovery. Unfortunately flashing in CWM has been the problem that lead me to flashing CWM through Odin. For more detail see the original post. Whenever I try to flash something through CWM the recovery has problems and it fails to load the rom that is installed.
I'm trying as many alternatives to pinpoint the problem. I'm going to try switching SD cards and see if the problem resulted from some kind of data corruption there. Should have an update on that sometime tonight.
If I can't figure out and fix the problem I'll be at the mercy of sprint or if I want root I'll have to wait for a pre-rooted EI22 rom complete with modem tarball so I can odin that.
I saw the OP but didn't see where you Odin'd a prerooted EC05 ROM like EC05plus. Then flash a GB ROM right after. Just 2 steps. Then if you want the modem one more step to flash the delta. It's worth a shot?
Sent from my SPH-D700 using XDA App
kennyglass123 said:
I saw the OP but didn't see where you Odin'd a prerooted EC05 ROM like EC05plus. Then flash a GB ROM right after. Just 2 steps. Then if you want the modem one more step to flash the delta. It's worth a shot?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I can't flash from CWM no matter how CWM gets on my phone. I tried exactly what you said. My original post says I Odined multiple stock and custom roms. I didn't get around to CWM flashing on a different card tonight, finals got me busy busy.
Enjoy your turkey day!
osiris2600 said:
I can't flash from CWM no matter how CWM gets on my phone. I tried exactly what you said. My original post says I Odined multiple stock and custom roms. I didn't get around to CWM flashing on a different card tonight, finals got me busy busy.
Enjoy your turkey day!
Click to expand...
Click to collapse
Thanks, you too.
So if Odining the EC05Plus ROM didn't get you a working 3 finger salute CWM, then maybe you should try ROM Manager and downloading CWM 5.X.
http://forum.xda-developers.com/showthread.php?t=1357655
It must be a hardware problem. I can odin a rom with CWM and it will boot fine. However if I ever try to open CWM the rom will never load again as the phone boots to recovery and get's stuck there.
I confirmed this by Odin flashing and then going into clockwork and not even flashing anything and it got stuck. Flashing in CWM will actually install things as I can change CWM within CWM but I still get stuck when trying to load the rom.
So the only way for me to enjoy a rooted phone is to refrain from CWM recovery.
I went back to a EH17 odined pre-rooted rom. When EI22 gets a modem tar hopefully someone will make a pre-rooted, deodexed, zipaligned odin tar (and if I'm lucky, CiQ will be removed).
Otherwise I'd like to get a replacement but explaining the problem to sprint is kind of a catch 22 since the issue only appears when I load a custom recovery.
How about flashing CWM 5.027 and downloading ROM Manager and installing 5.027 through that as well. Rom Manager actually downloads the CWM 5 and keeps it packed on your sd card and installs it everytime you use it. It allows ROM Manager to be able to update the CWM whenever a new version comes out.
Related
I have EC05 right now. Yesterday I flashed to ACS MIUI and it seems to work fine. Today I try to upgrade to EI22 with CWM 5.0.2.7 using modem.EC05toEI22.zip, but I get an error every time:
Updating modem to EI22...
script aborted (no error message)E:Error in /sdcard/firmware/modem.EC05toEI22.zip
(Status 7)
Installation aborted.
I tried re-downloading the file multiple times from different sources and I keep getting this error. What am I doing wrong?
Just had someone had a similiar issue with a modem.... can you odin back to stock ec05 and it completely flash everything?
It could be a hardware problem if your unable to flash back to stock ec05 and it gets stuck at modem.bin
Otherwise I'm sure someone else knows why its not flashing right... oh and have you tried flashing an alternative recovery possibly acs recovery5 its better. One more thing are you flashing from rom managers boot to recovery or your 3 finger salute?
Sent from my OG Epic
I odined back to stock EC05 then ota'd to EI22. Except now after I rooted and installed clockwork mod I can't boot into clockwork mod, I can only get into android system recovery, which I can't install a custom rom from. I have tried installing ACS CWM and the latest official CWM via odin and I still can't boot into anything but regular android system recovery using the three finger boot.
What is wrong now?
jagothejago said:
I odined back to stock EC05 then ota'd to EI22. Except now after I rooted and installed clockwork mod I can't boot into clockwork mod, I can only get into android system recovery, which I can't install a custom rom from. I have tried installing ACS CWM and the latest official CWM via odin and I still can't boot into anything but regular android system recovery using the three finger boot.
What is wrong now?
Click to expand...
Click to collapse
Samsung put a code into the kernel that reboots the original recovery mode every reboot. Download a custom kernel (which will overwrite this setting.) I recommend nebernal for this as it will work on rfs and I don't know if the others will... there is a qbking vid to properly root on ei22 if this is confusing you... Odin the cwm .tar and DON'T have auto reboot checked. After flashing cwm pull battery and reboot into recovery via the 3 finger method... now flash that kernel I told you to download and boom you now have a cwm tha sticks after reboot!!! Now you can flash whatever rom you would like... btw for future reference I'm pretty sure you have to mount/system in cwm when flashing anything from the new miui and cm roms because of the new mtd partition...
Sent from my SPH-D700 using Tapatalk
flastnoles11 said:
Samsung put a code into the kernel that reboots the original recovery mode every reboot. Download a custom kernel (which will overwrite this setting.) I recommend nebernal for this as it will work on rfs and I don't know if the others will... there is a qbking vid to properly root on ei22 if this is confusing you... Odin the cwm .tar and DON'T have auto reboot checked. After flashing cwm pull battery and reboot into recovery via the 3 finger method... now flash that kernel I told you to download and boom you now have a cwm tha sticks after reboot!!! Now you can flash whatever rom you would like... btw for future reference I'm pretty sure you have to mount/system in cwm when flashing anything from the new miui and cm roms because of the new mtd partition...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Thanks! I will give it a shot tonight. Can you please explain for a noob what you meant by "btw for future reference I'm pretty sure you have to mount/system in cwm when flashing anything from the new miui and cm roms because of the new mtd partition..." ?
jagothejago said:
Thanks! I will give it a shot tonight. Can you please explain for a noob what you meant by "btw for future reference I'm pretty sure you have to mount/system in cwm when flashing anything from the new miui and cm roms because of the new mtd partition..." ?
Click to expand...
Click to collapse
Not sure if this entirely right but with the new partition or reserved memory space the system needs to mounted in order for anything affecting or changing the system to work properly. However to do so its in mounts and storage you'd need to go to mount /system in cwm and then try flashing the ec05toei22.zip then it should work.
Sent from my OG Epic
Just a quick FYI for those of you, and possibly a thread for culmination of MobileOdin and ICS info.
So far, I'm 0 for 2 in flashing ICS (FC05 and FC07) to my phone. Each time would spur a "kernel panic upload" right in the middle of flashing the system. I did not have a custom recovery in either case.
A battery-pull was required to reboot my device, and it became soft-bricked. I was able to boot into recovery and download mode.
Since I don't have a PC at home, and my work PC won't let me put Odin on it, I was stuck flashing a custom kernel with Heimdal. No big deal, which let me boot back into CWM and flash Caulk's 2.9.1 back onto the device (I keep a copy of a working, CWM-flashable, full ROM on the external SD card).
silversx80 said:
Just a quick FYI for those of you, and possibly a thread for culmination of MobileOdin and ICS info.
So far, I'm 0 for 2 in flashing ICS (FC05 and FC07) to my phone. Each time would spur a "kernel panic upload" right in the middle of flashing the system. I did not have a custom recovery in either case.
A battery-pull was required to reboot my device, and it became soft-bricked. I was able to boot into recovery and download mode.
Since I don't have a PC at home, and my work PC won't let me put Odin on it, I was stuck flashing a custom kernel with Heimdal. No big deal, which let me boot back into CWM and flash Caulk's 2.9.1 back onto the device (I keep a copy of a working, CWM-flashable, full ROM on the external SD card).
Click to expand...
Click to collapse
Good info. Ive flashed kernels to the ICS roms using mobile ODIN but ive always gone back to EL29 and flashed using Rogue CWM for new roms.
RainMotorsports said:
Good info. Ive flashed kernels to the ICS roms using mobile ODIN but ive always gone back to EL29 and flashed using Rogue CWM for new roms.
Click to expand...
Click to collapse
Same here. Mobile Odin for kernels and CWM for roms works for me, and I flash a lot.
Sent from my Galaxy S II, AOKP style.
CWM Rogue Recovery doesn't seem to be sticking on my E4GT. Flashed CM9 Alpha 3 from stock rooted rom. When Alpha 4 was released, I tried to boot into CWM Recovery and ended up with stock recovery. Ended up having to odin back to stock and start over to get Alpha 4 running. Same problem now that Alpha 5 is out there, tried to boot into CWM Rogue Recovery and get stock recovery.
Doing a search shows that this seems to occur on other phones. They've resolved it by deleting a boot recovery file with Root Explorer. I was just hoping to confirm with someone that this method will work on the E4GT and the name and location of the file that needs to be deleted.
I'm assuming I'll have to odin back to stock and start the process over again and delete that file once I load up CWM Rogue Recovery again?
Thanks for the help.
CM9 comes with stock recovery. Look up EL26 kernel and learn to use it. Its your best friend for flashing on this phone. Also read up a little more on CM9 as it explains this.
This method will not work. With our phone, recovery has to be packed into the kernel, its not separate from other partitions like it is on other phones. This is why whenever you flash a new rom, your current recovery is replaced by the new roms packed in recovery. The reason its stock Android recovery is because of the bricking issue we've been having in ICS custom recovery so devs aren't including it into the kernel<rom.
So when you need CWM, flash the directboot CWM under the tools page in the epic4g touch CM blog spot website. You Odin that and it takes you straight to a sage recovery where you can flash the alpha 5 update. Understand?
Sent from my SPH-D710 using Tapatalk
Thank you both for pointing me in the right direction. I realized that I would have to go back to the EL26 to flash new roms. I didn't realize that I would have to do that to flash over an existing rom with an update. Thanks for setting me straight.
hmmm....interesting. The CM9 instruction page does not mention that you need to Odin the DirectBoot CWM when upgrading. I can see why a lot of people are skipping that step.
Thanks for the heads up, I am going to upgrade to alpha 5 after work. I'll make sure to Odin the DirectBoot CWM kernel first.
mjs2011 said:
I can see why a lot of people are skipping that step.
Click to expand...
Click to collapse
It is a new kernel modification that did not exist a couple weeks ago. The EL26 CWM kernel itself has been around since the end of last year. Being completely optional to use the new modded one you probably wont find it in instructions. I for example will never use it but others will find it easier because they do not understand why the phone goes into bootloops.
I just upgraded my E4GT Sprint from GB to ICS using the oneclick installer. I am trying to install the CODENAME rom from CWM but havng issues getting CWM installed. I used the the E4GT auto but FE16 isnt listed so i tried FE15 but it wont load into CWM. So i tried this link "http://forum.xda-developers.com/showthread.php?t=1390393" and flashed from ODIN and it goes into CWM but before it boots it says my phone is a gt-i9100 and has a ! on the bottom. It appears to boot though so i booted back into CWM and tried to flash the ZIP for CODENAME and the gapps file and it jsut gets stuck at the boot screen with the transformer logo. I cant get into CWM after that point and have to ODIN back to ICS. I am on ICS now and its working fine. Does anyone have any instructions on getting CWM installed and the codename rom from a fresh odin ICS install?
mazdaspeed6 said:
I just upgraded my E4GT Sprint from GB to ICS using the oneclick installer. I am trying to install the CODENAME rom from CWM but havng issues getting CWM installed. I used the the E4GT auto but FE16 isnt listed so i tried FE15 but it wont load into CWM. So i tried this link "http://forum.xda-developers.com/showthread.php?t=1390393" and flashed from ODIN and it goes into CWM but before it boots it says my phone is a gt-i9100 and has a ! on the bottom. It appears to boot though so i booted back into CWM and tried to flash the ZIP for CODENAME and the gapps file and it jsut gets stuck at the boot screen with the transformer logo. I cant get into CWM after that point and have to ODIN back to ICS. I am on ICS now and its working fine. Does anyone have any instructions on getting CWM installed and the codename rom from a fresh odin ICS install?
Click to expand...
Click to collapse
You really should read more before hopping around like that without checking. Real risk for a brick here.
-Flash EL26 stock CWM kernel via the PDA option in ODIN/Mobile ODIN
-When phone begins reboot, Hold Power + Volume up until boots into recovery.
-Wipe data/factory, cache and dalvik cache
-Flash ROM
-Flash Gapps
-Reboot
Those are the instructions right from the developer's thread. This is an AOSP rom and it sounds like you're trying to install TW kernels.
http://forum.xda-developers.com/showthread.php?t=1662295
This is the kernel repository. It links to each kernel where you can read further and find out if they are safe for flashing things.
Seems like you've done a bunch of stuff. But you really should do a whole bunch of reading first or you will brick your phone.
My suggestion would be to use sfhub's one-click http://forum.xda-developers.com/showthread.php?t=1705730 to get to a fully stock rooted device. Then use his autoroot package http://forum.xda-developers.com/showthread.php?t=1342728 to add CWM (the lates in the package is FF11+CWM Agat I believe) then you can add Agat's latest kernel with CWM http://forum.xda-developers.com/showthread.php?t=1721065
But I would be very careful when flashing ANY ROM; use the developers prefered method. Some recommend using EL26 CWM. Some a different recovery or procedure. Be especially careful with CM9 and AOKP builds to follow the directions there.
Good luck
So while i was waiting for a response i just went back to the stock GB using the one click install. I then used the autoroot package to install CWM and then restored my nandroid backup before i made in the very beginning. So my phone is back to a perfect state with GB and CWM installed. Can i just flash the ROM from CWM as is then? For some reason i thought it had to be "converted" to ICS and thats what started this whole mess. Things have changed since my old Evo
I just noticed that im running EL29 not 26...does that matter? When i try to flash that CMW EL26 stock root is when it gave me that gt-i9100 on boot and the ! at the bottom. Using the autoroot and choosing the EL29 Rogue is the only way i got it installed.
mazdaspeed6 said:
So while i was waiting for a response i just went back to the stock GB using the one click install. I then used the autoroot package to install CWM and then restored my nandroid backup before i made in the very beginning. So my phone is back to a perfect state with GB and CWM installed. Can i just flash the ROM from CWM as is then? For some reason i thought it had to be "converted" to ICS and thats what started this whole mess. Things have changed since my old Evo
I just noticed that im running EL29 not 26...does that matter? When i try to flash that CMW EL26 stock root is when it gave me that gt-i9100 on boot and the ! at the bottom. Using the autoroot and choosing the EL29 Rogue is the only way i got it installed.
Click to expand...
Click to collapse
My friend some good suggestions above your post. Give yourself a day or two and do some reading prior to flashing. This way you may not end up at Sprint making up stories about why your phone wont boot up.
Let me just echo what everybody else has said, you're gotta read more. A lot more! If you're one goal is to get CNA in your phone I would recommend reading all of the very first post on that thread. They give step by step instructions.
If you need CWM there are several options to get it on your phone. Both sfhub and I have put together several one-click and automated options to get it on your phone.
One thing that hasn't been suggested yet but I would strongly encourage you to do is to read the "How Not To Brick Your E4GT" thread. It's sticked in the General section.
Good luck!
Two more things.
1) If you're going to ask for help give it a few minutes before trying something new. It takes people a minute to reply. Sometimes waiting that extra minute or two is all you need to be saved from bricking.
2) Don't be afraid to hit your thanks button for everyone who has offered advice already. I got them once for you but it might not hurt to do it again.
I need some tips on flashing EL26 or EL29 recovery kernals from GB27 rom.
When flashed (odin, mobile odin, and zip) my phone gets stuck on the first Samsung E4GT logo. No recovery is added, volume up and power only reboots device to same logo.
Ive done this flash before and never had an issue. I dont know what could be the issue.
Would flashing a stock GB or ICS rom and pretty much starting from scratch be a good idea?
I guess my question is are there issues with flashing from GB27 to EL26/29? Do I need to be on a specific kernal? My only fear is if I flash a stock GB rom I wont have a kernal to flash anything else.
Could there be something wrong with my phone? It really seems to me flashing from my current rom isnt compatable.
Please send me some tips and advice on what roms to flash to get back to an el26 so I can proceed with my goal in all this which is flashing the new SHOstock rom with multi window.
Thank you and I appreciate any help!
Sent from my SPH-D710 using xda app-developers app
It wouldn't hurt starting from scratch. It sounds like your current Rom is having some sort of conflict with the EL26/EL29 CWM kernels. Have you tried flashing a gb27 cwm recovery? That will allow you to flash a new rom. They are stable as dd's now and I use them all the time. Try Garwynn or Agat's gb27, they both come with Agat's custom recovery which has cwm. If that doesn't take, might as well save all your important stuff and give a fresh start a try . Good luck.
Sent from my SPH-D710BST using xda premium
I have agats gb27 loaded and can flash from it. I need chris 44g el26 or 29 kernel to flash a specific rom. Rom does not load correctly in agats. Many people had issues and per instructions, user 26/29. I will try to start from scratch.
Sent from my SPH-D710 using xda app-developers app
You can use the stock rooted restore gb08 that's what I used to fix that problem. Try following ny guide to get it running perfect after you Odin the stock rooted.
Sent from my SPH-D710 using Tapatalk 4
FuMMoD said:
You can use the stock rooted restore gb08 that's what I used to fix that problem. Try following ny guide to get it running perfect after you Odin the stock rooted.
Sent from my SPH-D710 using Tapatalk 4
Click to expand...
Click to collapse
I gave flashing stock GB08 rooted a shot. I then flashed EL29 and EL26. Still does the same thing.
Doesnt boot to CWM.
If I flash a Gingerbread rom, since my EL26/29 isnt working, will I be able to access my current GB27 state I am in now without issue?
My AGAT GB27 is doing me well to retrieve all my current backups.
I dont want to go back to Gingerbread and not have a recovery to use because it uses EL26/29. So I would be screwed, correct?
Thanks!
I am trying to flash EL29 Gingerbread Stock Rom with Root.
This doesnt work as well. Odin freezes on the flash at FactoryFS.img.
Does anyone know why it would freeze on this file?
I've tried multiple tar files, different ports, different cords, two versions of odin.
I let it sit for 30 minutes and nothing. What caused the factoryfs.img file to freeze?
What hardware in the phone could cause this issue?
Any help wouldbe appreciated. All I want is EL26/[email protected]#$ WHYYYY!
If you flash el26 or 29 over ICS or JB your phone will not boot past splash screen. I always use el26 with odin from PC, kernel is flashed from pda slot. Reboot the phone and hold then keep holding power +vol up for like 30 seconds and you will boot into el26 recovery.
If you want to switch from from Touchwiz JB to AOSP or older GB/ICS rom you need to flash a ICS 1 click first like FI27 then flash el26 kernel and flash rom. If you are trying to flash the rooted el29 one click rom it should work. Maybe bad cable. I only flash with blackberry microusb cables.
el26 el29
IM stuck in flash screen. I have el26/el29 in tar.md5 I need them in zip format to flash on Odin. I don't have computer access. Stock cwm-El26.tar and El29 direct boot cwm.tar ?? Any way to get them in zip so I can flash in Odin.
Rehv said:
IM stuck in flash screen. I have el26/el29 in tar.md5 I need them in zip format to flash on Odin. I don't have computer access. Stock cwm-El26.tar and El29 direct boot cwm.tar ?? Any way to get them in zip so I can flash in Odin.
Click to expand...
Click to collapse
You are confused my friend. Odin uses .tar or .tar.md5 files and CWM recovery uses .zip files. And if you're stuck at splash screen after flashing el29 it's because you can't boot el26 or el29 unless you have that build rom on your phone. They are used for recovery only. Pull battery, reinsert, reboot into recovery, and flash the rom of your choice from there!(e4gt only of course)
Sent from my SPH-L710 using XDA Premium 4 mobile app
Ok I will try that. I flashed the el26 then flash flashed jb_28_ 2x.zip and it put me in Android system recovery<3e> gonna post a pic.thank u for it help.
This is what I see now.
Rehv said:
This is what I see now.
Click to expand...
Click to collapse
Did you get everything sorted out?
Sent from my SPH-L710 using Tapatalk
It looks like the situation I was in last time, I most likely know how to fix that?
? Powered By My Moga Pro ?
I never got it fixed. Bought a HTC one sv boost mobile. Thinking about trying to root it. But got to do my reading first don't want to brick this one. Sorry for late response.