Related
I installed the rom 6 times. different ways to try and install. redownloaded the file but no matter how i try it, after the boot animation screen, the screen goes blank like it shut off.
im on CWM 5.0.2.3
What version of starburst did you flash?
Sent from my SPH-D710 using XDA App
sleshepic said:
What version of starburst did you flash?
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
1.9 then 1.9.5
If you continue to hit walls you can always try going back to stock and starting over. Some on the starburst forum have had luck with that. And you didn't wipe data or format system between 1.9 and 1.9.5? Only cache and dalvik?
Sent from my SPH-D710 using XDA App
kyhassen said:
1.9 then 1.9.5
Click to expand...
Click to collapse
Do you have a mirror for the 1.9?........deleted by accident.
yang704 said:
Do you have a mirror for the 1.9?........deleted by accident.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=G7bC9qXqpg4&feature=youtu.be
have both 1.9 and 1.9.5
also i did wipe everything. after i did 1.9 booted up. went back to recovery and wiped Dcache and cache and still bugged.
an now with other roms i cant install kernals.. any idea?
kyhassen said:
I installed the rom 6 times. different ways to try and install. redownloaded the file but no matter how i try it, after the boot animation screen, the screen goes blank like it shut off.
im on CWM 5.0.2.3
Click to expand...
Click to collapse
Having the same issue
epic touch (loading starburst rom) shows the galaxy S boot like it should, then the screen seems to just go blakc, doesnt go into a boot cycle. I formatted the system , wipe data, wipe cache, wipe dalvik , in that order.
My procedure. Load odin, wipe the current zedomax kernal.tar with the root.
Root works great. Then flash the 6.1 zedo max ( for CM5 ). After that, i try to flash the staburst rom and it wont boot back up. i tried using the Lost kernal too.
I'm familiar with recovering it, so i'm able to get back to my backup and unroot the device no problem, just need help fixing the root. On my old EPIC, i had to do the one click root my self, then roms would load fine. please help!
---------- Post added at 10:47 PM ---------- Previous post was at 10:19 PM ----------
also on the video link from qbking77 on how to flash this rom
quite a few epic touch users are having the same problem =\
did u format the system before you wiped?
Same thing here. All I get.is boot animation then black screen. Bunk rom or something because ive tried everything. I've given up on this rom bit I really was looking forwatd to having tbis rom on my phone
If somebody finds a solution please post!
HELP...
Im having the same issue... i tried the starburst rom and once past the boot animation it goes black so i booted into recovery and tried to restore my nand and it isnt there like it was wiped during rom install... ok so after that i stayed in recorery downloaded the latest viper rom, flashed and the same thing happened.. i wiped\factory reset wiped dcache and cache every time i try a new rom... PLEASE HELP i just bought this phone from a freind and decided to root and now i cant even make my first call on it...
1. Boot into CWM recovery and make a Nandroid backup.
2. Format system under mounts and storage.
3. Wipe data/factory reset.
4. Wipe cache partition.
5. Wipe Dalvik cache under advanced.
6. Install StarburstROM. IF COMING FROM 1.8 YOU MUST FOLLOW THE ABOVE STEPS EACH TIME THEN INSTALL 1.9. THEN DO THE SAME AND INSTALL 1.9.5.
7. Wiping data may not be necessary but I would do it anyways then reboot, let it run for a few minutes, boot back into CWM and from the advanced restore menu restore just your data from the Nandriod backup you made.
---------- Post added at 01:00 PM ---------- Previous post was at 12:48 PM ----------
tobiasunruh said:
Im having the same issue... i tried the starburst rom and once past the boot animation it goes black so i booted into recovery and tried to restore my nand and it isnt there like it was wiped during rom install... ok so after that i stayed in recorery downloaded the latest viper rom, flashed and the same thing happened.. i wiped\factory reset wiped dcache and cache every time i try a new rom... PLEASE HELP i just bought this phone from a freind and decided to root and now i cant even make my first call on it...
Click to expand...
Click to collapse
Your Nandroid is still there it's just on your internal SD card. If you were using a kernel with an early version of CWM it backed up to the internal SD card. The latest version the dev's are incorporating into their ROMs now backs up to the external SD card. Just Odin back to whatever previous ROM/kernel you were on then boot up and copy the Clockwork folder to your external SD card. Then follow the directions I posted above for flashing StarburstROM.
IA-32e said:
1. Boot into CWM recovery and make a Nandroid backup.
2. Format system under mounts and storage.
3. Wipe data/factory reset.
4. Wipe cache partition.
5. Wipe Dalvik cache under advanced.
6. Install StarburstROM. IF COMING FROM 1.8 YOU MUST FOLLOW THE ABOVE STEPS EACH TIME THEN INSTALL 1.9. THEN DO THE SAME AND INSTALL 1.9.5.
7. Wiping data may not be necessary but I would do it anyways then reboot, let it run for a few minutes, boot back into CWM and from the advanced restore menu restore just your data from the Nandriod backup you made.
---------- Post added at 01:00 PM ---------- Previous post was at 12:48 PM ----------
Your Nandroid is still there it's just on your internal SD card. If you were using a kernel with an early version of CWM it backed up to the internal SD card. The latest version the dev's are incorporating into their ROMs now backs up to the external SD card. Just Odin back to whatever previous ROM/kernel you were on then boot up and copy the Clockwork folder to your external SD card. Then follow the directions I posted above for flashing StarburstROM.
Click to expand...
Click to collapse
Thanks for the help but I'm new to Samsung devices... Can you give instructions on how to restore with Odin?
Edit... I just check my external and it has a clock work folder on it.. The only thing in it is a file named ".salted_hash" and that's it..
Sent from my PG86100 using xda premium
tobiasunruh said:
Thanks for the help but I'm new to Samsung devices... Can you give instructions on how to restore with Odin?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Here's an excellent tutorial. This is my first Samsung device as well and the directions are pretty clear cut. I used Windows 7 64 Bit.
http://forum.xda-developers.com/showthread.php?t=1274337
---------- Post added at 01:38 PM ---------- Previous post was at 01:20 PM ----------
tobiasunruh said:
Edit... I just check my external and it has a clock work folder on it.. The only thing in it is a file named ".salted_hash" and that's it..
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Bummer man. Not sure how that happened unless you formatted your SD card accidentally.
IA-32e said:
Here's an excellent tutorial. This is my first Samsung device as well and the directions are pretty clear cut. I used Windows 7 64 Bit.
http://forum.xda-developers.com/showthread.php?t=1274337
---------- Post added at 01:38 PM ---------- Previous post was at 01:20 PM ----------
Bummer man. Not sure how that happened unless you formatted your SD card accidentally.
Click to expand...
Click to collapse
Do you think you could point me in the right direction to start over from stock? Like a tutorial on how to start over with a new boot image or a way to get past the boot animation?
Sent from my PG86100 using xda premium
tobiasunruh said:
Do you think you could point me in the right direction to start over from stock? Like a tutorial on how to start over with a new boot image or a way to get past the boot animation?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Everything you need is in the Android Development section.
http://forum.xda-developers.com/showthread.php?t=1282420
IA-32e said:
Everything you need is in the Android Development section.
http://forum.xda-developers.com/showthread.php?t=1282420
Click to expand...
Click to collapse
Thanks I'll give it a try.. Let you know what happens..
Edit...
That worked.. I'm back to stock with no root.. Thanks for the help greatly appreciated...
Sent from my PG86100 using xda premium
well i finally got my starburst rom working... but why does the media not. i cant play music, veiw pictures, or play videos.
Is that v1.9.5? If so what version did you upgrade from? People are having some problems when upgrading to 1.9.5.
Same issue. Tried multiple times, followed instructions to a T. Phone just goes black after flashing Starburst. Now I can only go to recovery or download mode. I couldn't install my nandroid backup (don't know why, based on filename it seemed like an old one from a different phone, not the one I did today).
Trying to go back to stock following
http://forum.xda-developers.com/show....php?t=1274337
but I'm on a MAC, and can't figure out how to heimdall a ROM. I can flash a kernel using heimdall, but don't know the commands and flashing order for the stockEG30.tar in terminal using heimdall. I also downloaded the frontend suites for heimdall, but can't figure out where to place stockeg30.tar files.
Any help? I have no windows machines.
in order to install starburst v1.9.5 you must have v1.9 installed first (recommended w/ flashing zedomax kernal or lost kernal in CWM after reboot), make sure phone is rooted properly and CWM is installed if not already (can be done via download mode w/ odin)
download v1.9 here:
http://dev-host.org/z1jsf3k9lh44/stable_epic_starburst_10.27.11_v1.9_.zip
to get this on your sdcard you will have to mount through usb on cwm via mounts and storage and connect to your pc
follow rom flash instructions as usual in cwm:
format system through mounts and storage
wipe data
wipe cache
wipe dalvik through advanced
install zip from sdcard
reboot
wait a few minutes booted
then set up your phone
next flash/install either zedomax kernal or LOSt kernal via CWM
forums and downloads found here:
http://forum.xda-developers.com/forumdisplay.php?f=1284
wipe cache and dalvik before for flashing through cwm
reboot
next download v1.9.5 here:
http://forum.xda-developers.com/showthread.php?t=1276320
make sure it is saved to the root of your sdcard from which you want to install
next all you have to do is flash v1.9.5 over v1.9
do not format system
do not wipe data
do not wipe cache
do not wipe dalvik
install from sdcard
reboot
video to flash v1.9.5 found here found here:
http://www.youtube.com/watch?v=G7bC9qXqpg4&feature=youtu.be
i wiped everything and installed RunnyDroid V2 it said installed completed and now it shows htc screen then goes back into recovery. What should i do or what am i doing wrong?
try and re-download the rom, maybe you were unlucky and have a bad file, do other roms flash ok since that problem?
is there another link to download that you know maybe i can download from some where else
http://forum.xda-developers.com/showthread.php?t=1374838
there are both the original link and mirror link, but just to make sure, do any other roms work ok?
---------- Post added at 02:58 AM ---------- Previous post was at 02:50 AM ----------
also did you wipe dalvik cache from advanced option in recovery?
yea mexdroid miui cyanogen virtuous i have tried them all this is the only one that has done this
im downloading this rom myself now, i will let you know if it works fine for me..
i ill will use another rom this rom look like it has potential
sorry to say, but this rom installed just fine for me...
u put it on your sd n install through recovery correct
yes copied to sdcard, reboot to recovery, full wipe, dalvik wipe, choose rom from sd-card to install.... done (was snappy at lockscreen and homescreen but a bit laggy on app draw)
You need the Desire Z HBOOT for all Sense 3 > roms.
Sent from my HTC Vision using XDA App
ah ha! guess i had done that long time ago and forgotten, was a bit puzzled but then it was silly o'clock in the morning...
I flashed from CM9 FF18 to Calkulin Gingerbread through CWM.
I went through the process of wiping with the zip file, installing rom, then installing the bare rom.
My phone works fine except i can't install anything through the play store. (Error 492)
-I tried to fix by clearing data of play store... No dice.
- I tried to factory reset, but for some reason it just hangs when i try to, after 10 mins i just hit back.
-I can't get into CWM Recovery. I get to the CWM 5.0.2.7 screen but i can't access any menus!
So at this point i'm stumped. IDK if i screwed up somewhere, but not sure what to do. I can get into Download mode and into odin, but not sure what i should flash or even if i need to.
Before this i have flashed cm10 and cm9 no problem.
Any help guys?
id get a rom thats flased with odin and just start over....
Sent from my SPH-D710 using xda app-developers app
Might sound like a dumb question, but i'm having a hard time figuring out how to ODIN a rom. i've only done it through CWM
I know i need a PDA/Phone/CSC file correct? Where do i get these?
The easy way. http://forum.xda-developers.com/showthread.php?t=1433101
---------- Post added at 12:06 AM ---------- Previous post was at 12:05 AM ----------
Get the reset data version. You don't have to fuss with individual files.
I'm having an issue with the latest liquidsmooth ROM. I updated my kernel, cleared my cache and my dalvik. This is a dirty flash. But I'm stuck at the Liquidsmooth loading animation. It has sat here for a good 10 minutes so far. Is this normal for the first time? I had this issue before so I just flashed back to my old rom and it was fine after that.
Anyone please? I can't use my phone and have no back ups or another rom to flash to. And my computer wont install the drivers in order to push a rom onto my phone..
What did you dirty flash from? Dirty flashes are generally a bad idea, unless you are flashing from an update for a rom. But even then, you need to make sure the OP says its ok to dirty flash because the nature of some update can require a full wipe
Sent from my PG06100
---------- Post added at 11:41 PM ---------- Previous post was at 11:40 PM ----------
And you dont need the drivers to get a rom on your phone. Just mount the sdcard through recovery and it should show as a usb mass storage device
Sent from my PG06100
CNexus said:
What did you dirty flash from? Dirty flashes are generally a bad idea, unless you are flashing from an update for a rom. But even then, you need to make sure the OP says its ok to dirty flash because the nature of some update can require a full wipe
Sent from my PG06100
---------- Post added at 11:41 PM ---------- Previous post was at 11:40 PM ----------
And you dont need the drivers to get a rom on your phone. Just mount the sdcard through recovery and it should show as a usb mass storage device
Sent from my PG06100
Click to expand...
Click to collapse
I did a dirty flash from JellyBomb. And it wont allow me to mount the sdcard, I choose it and it just stays at "mount sdcard". I have mounted the extsdcard but when I plug my phone into my computer, it makes 3 beeps and doesn't display anything. Also, I appreciate all the help.
Edit: After doing a wipe installing liquidsmooth works now I have lost eveyrthing though
Theminatar said:
I did a dirty flash from JellyBomb. And it wont allow me to mount the sdcard, I choose it and it just stays at "mount sdcard". I have mounted the extsdcard but when I plug my phone into my computer, it makes 3 beeps and doesn't display anything. Also, I appreciate all the help.
Edit: After doing a wipe installing liquidsmooth works now I have lost eveyrthing though
Click to expand...
Click to collapse
You shouldve made a nandroid, then you couldve done advanced restore > data only....
Sent from my PG06100
I've got a Virgin Mobile Samsung S II.
I followed this guide to root my phone on my macbook. Following it exactly gave me this error message in terminal: ERROR: Partition "kernel" does not exist in the specified PIT.
After thorough reading of the old root guide thread, I thought it was a case sensitivity issue since I was using a newer version of Heimdall. In terminal, I entered: heimdall flash --KERNEL zImage to start the process rather than all lowercase "kernel."
Now my phone won't boot beyond the startup screen that says "Samsung GALAXY S II" with a yellow error triangle. Can anyone please help? I know very little about these things, so the simpler the answers, the better -- any and all would be greatly appreciated.
If it's helpful, here is what the terminal screen displayed:
xxxxx-xxxx-macbook-pro-2ownloads ACraig426$ cd /Users/ACraig426/Downloads
xxxxx-xxxx-macbook-pro-2ownloads ACraig426$ tar xvf SPH-D710_Zedomax_EpicTouchKernel-v3.tar
x zImage
xxxxx-xxxx-macbook-pro-2ownloads ACraig426$ ls -l
total 32512
[email protected] 1 ACraig426 staff 8325120 Sep 3 20:29 SPH-D710_Zedomax_EpicTouchKernel-v3.tar
[email protected] 1 ACraig426 staff 8315836 Sep 22 2011 zImage
andrew-craigs-macbook-pro-2ownloads ACraig426$ heimdall flash --KERNEL zImage
Heimdall v1.4.0
Copyright (c) 2010-2013, Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
PIT file download successful.
Uploading KERNEL
100%
KERNEL upload successful
Ending session...
Rebooting device...
Releasing device interface...
I can go into CWM Recovery or download mode, if that helps.
@monsieurblue ......can you boot to recovery/did you put a recovery on the device.. if you did and can get there, try to wipe cache and dalvik cache and reboot.. if that doesn't work.. I would try flashing a rom.. maybe you wiped it off when in heimdall.. Just my thoughts..
noearso the
Gil81 said:
@monsieurblue ......can you boot to recovery/did you put a recovery on the device.. if you did and can get there, try to wipe cache and dalvik cache and reboot.. if that doesn't work.. I would try flashing a rom.. maybe you wiped it off when in heimdall.. Just my thoughts..
Click to expand...
Click to collapse
I can boot to ClockWork Mod Recovery. Which I believe means that something took, because that's not something that would be on the phone otherwise, right? I tried using it to wipe the cache and dalavik cache, but it didn't work.
I'm sorry if this is a dumb question, but how can I flash a ROM? If I can only load the download and CWM screens, is there still a way to get a ROM onto the phone to flash it?
Thanks for the reply!
@monsieurblue .. might be that kernel you flashed isn't compatible with the rom you're running. Try a different kernel that you now is compatible.
Gil81 said:
@monsieurblue .. might be that kernel you flashed isn't compatible with the rom you're running. Try a different kernel that you now is compatible.
Click to expand...
Click to collapse
OK. Maybe the problem is that I'm not running a ROM right now? I was on the stock 4.1 that came on the phone when I bought it before this process. Now that I'm done this kernel thing, do I need to flash a ROM before the phone will boot up?
I can mount the phone with CWM to add/remove files from my computer. Can I add a .zip of a rom to install that way?
monsieurblue said:
I can boot to ClockWork Mod Recovery. Which I believe means that something took, because that's not something that would be on the phone otherwise, right? I tried using it to wipe the cache and dalavik cache, but it didn't work.
I'm sorry if this is a dumb question, but how can I flash a ROM? If I can only load the download and CWM screens, is there still a way to get a ROM onto the phone to flash it?
Thanks for the reply!
Click to expand...
Click to collapse
Because you now have a custom recovery ( I think ) you can use adb or something to get a rom on the phone.. I'm not sure as I've never looked into it, but I will.. hang tight. Also I think you can use heimdall to flash a rom.. right.
---------- Post added at 08:56 PM ---------- Previous post was at 08:49 PM ----------
monsieurblue said:
OK. Maybe the problem is that I'm not running a ROM right now? I was on the stock 4.1 that came on the phone when I bought it before this process. Now that I'm done this kernel thing, do I need to flash a ROM before the phone will boot up?
I can mount the phone with CWM to add/remove files from my computer. Can I add a .zip of a rom to install that way?
Click to expand...
Click to collapse
Yep.. that's what I thought.. just make sure you flash the rom correctly. A lot of the roms require you to flash from el26 or el29 direct boot kernel's. Since you can't boot, el29 is out. But you can put the rom of choice and gapps and el26 kernel on sdcard. Then wipe data, cache, dalvik. Then flash el26.after the flash go to advanced and pick reboot recovery. This will boot you back to recovery but the el26 recovery. Then flash rom.. then flash gapps.. you might want to wipe data, cache, dalvik again to be sure. You can also go to mount and format system.. only system... this will ensure a super clean flash..
Gil81 said:
Yep.. that's what I thought.. just make sure you flash the rom correctly. A lot of the roms require you to flash from el26 or el29 direct boot kernel's. Since you can't boot, el29 is out. But you can put the rom of choice and gapps and el26 kernel on sdcard. Then wipe data, cache, dalvik. Then flash el26.after the flash go to advanced and pick reboot recovery. This will boot you back to recovery but the el26 recovery. Then flash rom.. then flash gapps.. you might want to wipe data, cache, dalvik again to be sure. You can also go to mount and format system.. only system... this will ensure a super clean flash..
Click to expand...
Click to collapse
This is incredibly helpful; thank you so much.
I'm sorry for the ignorance, but can you explain to me what el26 is, and what ROM I should flash? When I started this process, I wanted to install this one, but there are warnings saying not to install on a Jelly Bean Modem and I don't know what else to use or how to install on a different modem.
And just to make sure I understand, when you say "flash" el26, that means it's a .zip that will be on my sdcard, which I install by using the "install zip from sdcard" option on CWM, right?
Thanks again!
monsieurblue said:
This is incredibly helpful; thank you so much.
I'm sorry for the ignorance, but can you explain to me what el26 is, and what ROM I should flash? When I started this process, I wanted to install this one, but there are warnings saying not to install on a Jelly Bean Modem and I don't know what else to use or how to install on a different modem.
And just to make sure I understand, when you say "flash" el26, that means it's a .zip that will be on my sdcard, which I install by using the "install zip from sdcard" option on CWM, right?
Thanks again!
Click to expand...
Click to collapse
Give me about ten minutes and I'll hunt down some links for you and give ya a little guide..
---------- Post added at 09:39 PM ---------- Previous post was at 09:06 PM ----------
monsieurblue said:
This is incredibly helpful; thank you so much.
I'm sorry for the ignorance, but can you explain to me what el26 is, and what ROM I should flash? When I started this process, I wanted to install this one, but there are warnings saying not to install on a Jelly Bean Modem and I don't know what else to use or how to install on a different modem.
And just to make sure I understand, when you say "flash" el26, that means it's a .zip that will be on my sdcard, which I install by using the "install zip from sdcard" option on CWM, right?
Thanks again!
Click to expand...
Click to collapse
Ok.. I can't find a zip file for el26 or el29..you can go about this by getting one of these recoveries. They are in rwilco's repo..el26 is at the top of the page.. don't get a stock one.. lol. As it will have stock recovery. Get the. Tar version of the file and use heimdall to flash it and then proceed with flashing rom, gapps.. but I don't know how heimdall works, I'm a windows man. Or you could flash a rom with heimdall.. Or yet another way is to try to flash the rom from that recovery you have.. I'm not sure about it.. if I was you I would download the tar el26 kernel and a JB rom based on touchwiz from Android development thread and the gapps.. put the rom and gapps on sdcard. Then figure out a way to flash the tar el26 with heimdall..
Yes.. flash means install... and the modem thing is because CM/AOSP/AOKP roms need an ICS modem to get data working. That why I suggested the JB touchwiz rom.. it will work with the modem you have. I'm assuming it's gb27modem(jb modem)..
---------- Post added at 09:50 PM ---------- Previous post was at 09:39 PM ----------
Ok... I'm an idiot.. lol. I found the zip for el26 kernel.. http://forum.xda-developers.com/showthread.php?t=1662295 ..scroll down the page to GB touch wiz kernel.. find chris41g stock cwm5 repacked kernel and download the el26 zip one..
Gil81 said:
Give me about ten minutes and I'll hunt down some links for you and give ya a little guide..
---------- Post added at 09:39 PM ---------- Previous post was at 09:06 PM ----------
Ok.. I can't find a zip file for el26 or el29..you can go about this by getting one of these recoveries. They are in rwilco's repo..el26 is at the top of the page.. don't get a stock one.. lol. As it will have stock recovery. Get the. Tar version of the file and use heimdall to flash it and then proceed with flashing rom, gapps.. but I don't know how heimdall works, I'm a windows man. Or you could flash a rom with heimdall.. Or yet another way is to try to flash the rom from that recovery you have.. I'm not sure about it.. if I was you I would download the tar el26 kernel and a JB rom based on touchwiz from Android development thread and the gapps.. put the rom and gapps on sdcard. Then figure out a way to flash the tar el26 with heimdall..
Yes.. flash means install... and the modem thing is because CM/AOSP/AOKP roms need an ICS modem to get data working. That why I suggested the JB touchwiz rom.. it will work with the modem you have. I'm assuming it's gb27modem(jb modem)..
---------- Post added at 09:50 PM ---------- Previous post was at 09:39 PM ----------
Ok... I'm an idiot.. lol. I found the zip for el26 kernel.. http://forum.xda-developers.com/showthread.php?t=1662295 ..scroll down the page to GB touch wiz kernel.. find chris41g stock cwm5 repacked kernel and download the el26 zip one..
Click to expand...
Click to collapse
Cool! So I download the el26 .zip and put that onto my sdcard, then flashed it. Now, what ROM and Gapps should I put on there as well before following the rest of your plan and booting the whole thing up? My intention was to install something with Jelly Bean 4.2.2, but now that I'm all turned around, I'm not sure what the best ROM for that is.
@monsieurblue ..
After you have the kernel on you sdcard(not in a folder). And you have the rom/gapps you want.... wipe cache and dalvik cache(under advanced). Then click install from sdcard. Pick install from internel.. just thought you might have been able to put it on ext.sdcard.Anyway,go to el26 zip file and install. After install is done. Go to advanced and pick reboot recovery and phone will boot to the el26 recovery(you might have to push volume up.. volume down.. volume up) to get you're power button to work as the select button. It's like that on el29..
Now wipe data, cache, dalvik.. then flash rom. After it's done flash the gapps the rom op thread suggested. If all goes well after this.. you can reboot..
I think this will get ya home.. Let me know.
---------- Post added at 10:05 PM ---------- Previous post was at 10:04 PM ----------
monsieurblue said:
Cool! So I download the el26 .zip and put that onto my sdcard, then flashed it. Now, what ROM and Gapps should I put on there as well before following the rest of your plan and booting the whole thing up? My intention was to install something with Jelly Bean 4.2.2, but now that I'm all turned around, I'm not sure what the best ROM for that is.
Click to expand...
Click to collapse
Sorry I'm so slow posting.. I'm on my tab pulling 4g from my epic.. lol
---------- Post added at 10:07 PM ---------- Previous post was at 10:05 PM ----------
I like project X or paradoX...both great roms...
Gil81 said:
@monsieurblue ..
After you have the kernel on you sdcard(not in a folder). And you have the rom/gapps you want.... wipe cache and dalvik cache(under advanced). Then click install from sdcard. Pick install from internel.. just thought you might have been able to put it on ext.sdcard.Anyway,go to el26 zip file and install. After install is done. Go to advanced and pick reboot recovery and phone will boot to the el26 recovery(you might have to push volume up.. volume down.. volume up) to get you're power button to work as the select button. It's like that on el29..
Now wipe data, cache, dalvik.. then flash rom. After it's done flash the gapps the rom op thread suggested. If all goes well after this.. you can reboot..
I think this will get ya home.. Let me know.
---------- Post added at 10:05 PM ---------- Previous post was at 10:04 PM ----------
Sorry I'm so slow posting.. I'm on my tab pulling 4g from my epic.. lol
---------- Post added at 10:07 PM ---------- Previous post was at 10:05 PM ----------
I like project X or paradoX...both great roms...
Click to expand...
Click to collapse
Ha, it's no problem! I'm just glad for the help. I think I've got the hang of what to do once I've got the ROM/Gapps picked out, I just don't know which one to pick out. Which do you mean when you say the ones OP thread suggested? The "Liquid Smooth" one I linked to in my thread starter is what I want, but since I haven't changed my modem, I think it will harm the phone (it says in the instructions not to install on a Jelly Bean modem, which is what I believe I have right now).
Just saw your recommendation for project X and paradoX -- I'll check them out now, thanks!
If you dead set on 4.2.2...I love slimbean4.2...4.3 has no 4g. Also you will need slimgapps for slimbean as it boots at 182 dpi for the screen size. You can also use the lz kernel in the slimbean thread.. But I would stick to touchwiz until you get you're feet wet,, lol..Because flashing slim or other cm/aosp/aokp roms will require the ICS modem flash and then a temp boot flash to update you prl and profile.. You can boot a tw rom tonight then tomorrow get mobile Odin and flash an ICS modem(FL24 is the newest)then update prl and profile. After this you could use el29 direct boot kernel to flash any cm/aosp/aokp rom you want.. and have data.. wheww.. lol. Let me know if you need a guide for mobile Odin. I wrote a little one up here in q and a.. awhile back.
---------- Post added at 10:26 PM ---------- Previous post was at 10:19 PM ----------
monsieurblue said:
Ha, it's no problem! I'm just glad for the help. I think I've got the hang of what to do once I've got the ROM/Gapps picked out, I just don't know which one to pick out. Which do you mean when you say the ones OP thread suggested? The "Liquid Smooth" one I linked to in my thread starter is what I want, but since I haven't changed my modem, I think it will harm the phone (it says in the instructions not to install on a Jelly Bean modem, which is what I believe I have right now).
Just saw your recommendation for project X and paradoX -- I'll check them out now, thanks!
Click to expand...
Click to collapse
That's cool.. flash it tomorrow. After we get ya back up.. and about the op.. sometimes rom Devs will suggest you flash a certain gapps pkg.
FYI.. it won't hurt you're phone.. you just won't have data.. also you know you will have to change you're APN settings to get mms working.. unless you're on sprint.. I'm a boost boy.
You could flash the one you want. Then get an ICS modem and flash it in recovery.. wipe cache/dalvik..flash modem.. reboot. But you're signal might be buggy without the prl update.. and you can't update prl's from cm/aosp/aokp roms.. as of yet..
---------- Post added at 10:33 PM ---------- Previous post was at 10:26 PM ----------
Just so you know.. I gave you you're first thanks..it's the thanks button on the bottom of post.. you can use it 8 times a day.. I know it sounds childish.. but we live for that thanks button on xda..lol
---------- Post added at 10:40 PM ---------- Previous post was at 10:33 PM ----------
[/COLOR @monsieurblue ..I just thought of this.. I've read where sometimes you have to flash an ICS one-click first.. if you're going from JB to AOSP roms.. or it won't boot past splash screen.. I haven't had this issue.. but it's out there.. just a heads up.
---------- Post added at 10:49 PM ---------- Previous post was at 10:40 PM ----------
If you decide to flash another rom..This is a fool proof way to flash.. almost.. lol. Just remember that mobile Odin will NOT flash modem's.. The post you want is post 5..
http://forum.xda-developers.com/showthread.php?t=2418320
---------- Post added at 10:53 PM ---------- Previous post was at 10:49 PM ----------
I posted a link I think you should read through.. seen you already seen the post before I added. So I'm sending this.. it's the link above
@monsieurblue
This is incredible, it worked! Thank you so much!
My concern now is getting to a ROM that I like -- this Project X one is good as a temporary measure, but I really want something that's 4.2.2 and highly customizable (and, most importantly, able to be installed from a mac).
@Gil81
Last question, I promise! To install Slimbean 4.2, which you recommended, it looks like I can follow this guide. Only problem is the Odin One-Click ICS Root: I can't follow those instructions because they're exclusive to Windows and I'm on a Mac. Any idea on how to install Slimbean 4.2 onto my device from where I am now? And do I need to change the modem, like you mentioned earlier?
monsieurblue said:
@Gil81
Last question, I promise! To install Slimbean 4.2, which you recommended, it looks like I can follow this guide. Only problem is the Odin One-Click ICS Root: I can't follow those instructions because they're exclusive to Windows and I'm on a Mac. Any idea on how to install Slimbean 4.2 onto my device from where I am now? And do I need to change the modem, like you mentioned earlier?
Click to expand...
Click to collapse
alright...youre back up...good job man...:good:
ALWAYS...I MEAN...ALWAYS FOLLOW THE INSTALL DIRECTIONS IN THE ROM'S THREAD...:fingers-crossed:..
That being said..now that youre up and running follow the guide i linked to in the above post...its a mobile odin guide for flashing roms on our phone..it will work will almost all roms. it is how i have flashed every rom but a couple one-clicks..
BUT BEFORE YOU GO TO THAT LINK....download fl24 or another ics modem and flash it in recovery on the rom you have now..after the flash and you reboot back to the rom..update the prl and profile. just remember after you do this you wont have data....but it is the right modem for slimbean or the rom you really wanted..FYI..the mobile odin guide will work for that rom you first wanted...just follow the links in it and the directions to the letter...it is a proven way to flash...
Dont worry about the ics one-click...i never have any problems..if you do. you can always go back and just completely wipe youre phone and sdcard. then use heimdall to flash the rom.. the one click just clean slates youre phone and changes the partitions...i believe heimdall would do the same if you where to use it to flash..but i think youll be fine..
@Gil81
Awesome, I'm going to follow this exactly later tonight! Thanks again for all of the help!
In the guide you linked to, you say:
First...you will need to get all the needed files( ROM, Gapps( for the rom you pick ),EL29 direct boot kernel. http://forum.xda-developers.com/show....php?t=1662295 ..this is the link to rwilcos repo..scroll down to gb-touch wiz based kernels. Then look for EL 29 direct boot/tar.. You will need the tar.md5 format. Place this tar and the ROM and Gapps on the root of you're internal sdcard( not in a folder ).
Click to expand...
Click to collapse
Would I be using the JB Touch-Wiz Based Kernel or the GB Touch-Wiz Based Kernel if I'm using a Slimbean 4.2.2 ROM?
monsieurblue said:
@Gil81
Awesome, I'm going to follow this exactly later tonight! Thanks again for all of the help!
In the guide you linked to, you say:
Would I be using the JB Touch-Wiz Based Kernel or the GB Touch-Wiz Based Kernel if I'm using a Slimbean 4.2.2 ROM?
Click to expand...
Click to collapse
when you follow thw link...it will take you to rwilco's repo.. Scroll down the page (almost to the bottom of the kernel listings)and you will see a link for the el29 direct boot kernel..get the tar version because you will be using mobile odin..The el29 direct boot kernel is a safe gingerbread kernel we use to flash roms(it will not boot up on the rom youre flashing)..
you see..we just use that kernel and recovery to flash...once you flash the rom it will install the kernel made to run with that rom. Our recovery is funny on this phone...it is part of the kernel,thats why we use that kernel to flash..it is safe and has a safe recovery..
I just prefer el29 direct boot ( instead of el26 ) because when you flash it with mobile odin it will boot straight to recovery for you...no pulling the battery and then putting it back in and holding power button and volume up to get to recovery..:laugh:..
remember to get the slim gapps for 4.2...and after you get slim bean booted up and let it settle in for a few hours...you can flash the lighning kernel for slimbean linked in the slimbean thread...to flash it you just boot to recovery...wipe cache and dalvik and install it..then reboot..:good:...it is really the only tweak i run with slimbean..great battery life..
if you need any help...dont hesitate to ask...thats what xda is all about...Good Luck.
---------- Post added at 02:17 PM ---------- Previous post was at 01:53 PM ----------
Here is the link to the lz kernel... http://forum.xda-developers.com/showthread.php?t=2270358 ...
Just scroll down until you see ( smdk 4412 p_4 zip ) Thats the one you want...
FYI...some people reported a boot loop on this kernel if you wiped cache or dalvik...I never had the issue, but its out there...
I also seen a new kernel thread in the original development thread...blasphamy kernel..i think.. You could also try it..Just remember to make a backup before going flashy crazy..so if things go side ways,you can get back to where you sarted...
@Gil81
I've hit a roadblock! I was following this list I made based on your instructions:
MODEM
1. Add FL24.zip to sdcard and flash in recovery.
2. Reboot.
3. Update the PRL and profile.
ROM
1. Place ROM, Gapps, and EL29 boot kernel on the sdcard.
2. Open mobile odin > kernel > internal sdcard > EL29 direct boot kernel > flash firmware > check md5 > flash
3. Once in recovery, push volume up, volume down, volume up (this will make the power button the enter button)
4. Wipe data
5. Wipe cache
6. Wipe dalvik cache
7. Mounts/storage > format system (only system)
8. Install from internal sdcard > ROM zip file
9. Install from internal sdcard > Gapps
10. Reboot
I finished step 2 on ROM, then the system restarted and the phone didn't boot past the "Samsung GALAXY SII" screen. When I hold the power and volume up buttons to get into recovery, it goes into a recovery screen that says "Android system recover <3e>" at the top. I have four options:
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
I wiped the data and cache based on your instructions, but there's no option to wipe the davlik cache, and when I go to "apply update from sdcard" it says: E:failed to mount /sdcard (No such file or directory)
Help!
monsieurblue said:
@Gil81
I've hit a roadblock! I was following this list I made based on your instructions:
MODEM
1. Add FL24.zip to sdcard and flash in recovery.
2. Reboot.
3. Update the PRL and profile.
ROM
1. Place ROM, Gapps, and EL29 boot kernel on the sdcard.
2. Open mobile odin > kernel > internal sdcard > EL29 direct boot kernel > flash firmware > check md5 > flash
3. Once in recovery, push volume up, volume down, volume up (this will make the power button the enter button)
4. Wipe data
5. Wipe cache
6. Wipe dalvik cache
7. Mounts/storage > format system (only system)
8. Install from internal sdcard > ROM zip file
9. Install from internal sdcard > Gapps
10. Reboot
I finished step 2 on ROM, then the system restarted and the phone didn't boot past the "Samsung GALAXY SII" screen. When I hold the power and volume up buttons to get into recovery, it goes into a recovery screen that says "Android system recover <3e>" at the top. I have four options:
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
I wiped the data and cache based on your instructions, but there's no option to wipe the davlik cache, and when I go to "apply update from sdcard" it says: E:failed to mount /sdcard (No such file or directory)
Help!
Click to expand...
Click to collapse
That's because you got the el29 kernel...not the el29 direct boot kernel....you just flashed a stock kernel that will not boot with anything but a gingerbread rom...
i think i warned you about that...now you will need to heimdall a recovery back on to the phone...