Anyone have any idea if this will cause issues?
Current Specs attached.
mindgrind said:
Anyone have any idea if this will cause issues?
Current Specs attached.
Click to expand...
Click to collapse
Well, I flashed MIUI ROM while on the EL13 modem and it was working just fine, my guess is that it will work fine as well on the Cyanogenmod ROM too
mindgrind said:
Anyone have any idea if this will cause issues?
Current Specs attached.
Click to expand...
Click to collapse
It will work fine. I did it with no problems.
Sent from my SPH-D710 using Tapatalk
mindgrind said:
Anyone have any idea if this will cause issues?
Current Specs attached.
Click to expand...
Click to collapse
FYI, this is a totally legit thing to post in Bubby's CM thread (it does not need to go in Q&A)
While no one but developers should START threads in that section, questions about a specific Rom are totally legitimate to put IN a rom's thread.
Related
How come I'm running the 9/5 nightly and now when I want to flash the 9/12 or 9/13 nightly I am getting a reboot loop without it actually booting up. Luckily I have a nandroid backup because if I didn't I would be screwed. I'd like to update to a newer nightly but I have no way of doing it with these constant reboots. Can anyone suggest something to me? I've tried all the wipes before updating and nothing is helping. I'm running RA anon 1.7, no modified kernel or anything like that. Newest radio and newest PRI/PRL.
Again, as long as I restore my nandroid everything runs like cake but I do like to update my OS and this issue is bothering me.
Thanks!
running 9/13 with no problems
jaysmi32 said:
running 9/13 with no problems
Click to expand...
Click to collapse
Thank you, I should also add that I'm well aware that others are running these roms without problems. I would just like to figure out what my issue is and how to fix it. Can anyone provide suggestions so I can do that?
forumsid987 said:
Thank you, I should also add that I'm well aware that others are running these roms without problems. I would just like to figure out what my issue is and how to fix it. Can anyone provide suggestions so I can do that?
Click to expand...
Click to collapse
i as you are, am experiencing the same issue. Now... out of curiosity can you flash the 9/6 nightly fine? that was the last nightly i could use that booted, everything else just bootsplash loops.
keyword nightly
also this needs to be in the Q&A section
ranmasaotome510 said:
i as you are, am experiencing the same issue. Now... out of curiosity can you flash the 9/6 nightly fine? that was the last nightly i could use that booted, everything else just bootsplash loops.
Click to expand...
Click to collapse
I haven't tried it but I would wager yes. It seems as though 9/6+ contains a new kernel that our phones don't like
http://forum.androidcentral.com/showthread.php?p=342034&posted=1#post342034
Sorry about the incorrect forum, can I move it or does a Mod need to?
Sporkman said:
keyword nightly
also this needs to be in the Q&A section
Click to expand...
Click to collapse
I think it's a bigger issue than just being a nightly if the kernel is that crazy for EVERY nightly from 9/6+
No issues here with 9/11-9/13, other than my YouTube app when using v7.6 Turbo? Which I still need to figure out.
granted its something kernel related, using snap, i can then use the latest nightlies... only problem is, i dont want snap >_> i want cm kernel, oh well cant have it all am i rite? lol.
ill try again next week's nightly.
keyword nightly
also this needs to be in the Q&A section
Click to expand...
Click to collapse
yeah, license and registration also plz
Dozenboy0012 said:
yeah, license and registration also plz
Click to expand...
Click to collapse
Do I smell marijuana?
Step away from the phone sir..
NOTE: DO NOT FLASH THIS TO YOUR PHONE> IT WILL HARD BRICK!
this is for any dev that wants to try and port android jellybean to the s3 Tmobile version. they already ported it to the internationl version so i think that might make it a little easier. here is the OP in the international section: http://forum.xda-developers.com/showthread.php?t=1737449
fcortes626 said:
NOTE: DO NOT FLASH THIS TO YOUR PHONE> IT WILL HARD BRICK!
this is for any dev that wants to try and port android jellybean to the s3 Tmobile version. they already ported it to the internationl version so i think that might make it a little easier. here is the OP in the international section: http://forum.xda-developers.com/showthread.php?t=1737449
Click to expand...
Click to collapse
Hmmm...
Wonder if we could take that ROM, change the updater-script to match our mounting points....then we just need a kernel....
Which we have one kernel already made. Not sure if it would work though.
If anyone would help set up a build environment that would work for our kernels and roms then I will gladly help and start learning.
Sent from my SGH-T999 using Tapatalk 2
brfield said:
Which we have one kernel already made. Not sure if it would work though.
If anyone would help set up a build environment that would work for our kernels and roms then I will gladly help and start learning.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I think we'd need a stock CM9 based kernel though. If I understand correctly.
uoY_redruM said:
I think we'd need a stock CM9 based kernel though. If I understand correctly.
Click to expand...
Click to collapse
Well, it shouldn't take too long. It may be possible to build a CM9 Kernel for our phones using parts of the stock kernel that we have access to.
Once the JB source is released, an S3 port might actually be viable. Otherwise it's essentially just flashing a gnex image and praying something/anything works.
uoY_redruM said:
I think we'd need a stock CM9 based kernel though. If I understand correctly.
Click to expand...
Click to collapse
a CM9 kernel shouldn't be needed, just a modded kernel for our specific phone from what i believe.
We know this, but it's more of an experiment. Also, it helps work out anything we may need to do early on with the modules and drivers
Sent from my SGH-T999 using Tapatalk 2
Why not take this ROM, change the updater-script for our mount points, remove the flashing of the boot.img, flash ROM then flash the kernel Roman release?
Think that would work?
uoY_redruM said:
Why not take this ROM, change the updater-script for our mount points, remove the flashing of the boot.img, flash ROM then flash the kernel Roman release?
Think that would work?
Click to expand...
Click to collapse
It could, in theory. But we would need to work on the modules for anything to work. Could you post our mount points?
why does it have to be a cm9 kernel?
to be completely honest, as soon as we get a cm9 alpha, we will see some worth while stuff! but until then. TouchWiz it iz. We will have team kang's AOKP in no time im sure. i cant wait to see wuts to come. especially since this phone is at all the major carriers and they are all basically exactly the same! should be epic.
Radsolutionz said:
to be completely honest, as soon as we get a cm9 alpha, we will see some worth while stuff! but until then. TouchWiz it iz. We will have team kang's AOKP in no time im sure. i cant wait to see wuts to come. especially since this phone is at all the major carriers and they are all basically exactly the same! should be epic.
Click to expand...
Click to collapse
yea i think once one of the other major carriers (or ares) get cm9 then we will see some awesome stuff for everyones phone!
I think that the only thing that makes them different is the radios in the phone
uoY_redruM said:
Hmmm...
Wonder if we could take that ROM, change the updater-script to match our mounting points....then we just need a kernel....
Click to expand...
Click to collapse
uoY_redruM said:
I think we'd need a stock CM9 based kernel though. If I understand correctly.
Click to expand...
Click to collapse
uoY_redruM said:
Why not take this ROM, change the updater-script for our mount points, remove the flashing of the boot.img, flash ROM then flash the kernel Roman release?
Think that would work?
Click to expand...
Click to collapse
If aosp was that easy we would all be doing it but no... way more complex than that....
im on my phone. expect terrible typos.
howtomen said:
If aosp was that easy we would all be doing it but no... way more complex than that....
im on my phone. expect terrible typos.
Click to expand...
Click to collapse
Wishful thinking I suppose
in another note i found a mini tutorial on how to port it to other devices if anyone wants to try it here is the guide. it is an SDK port. note: i did not write this guide i am just posting a link to the authors op. you can thank him and/or donate to him. here isorum.xda-developers.com/showpost.php?p=28020178&postcount=36 the link:
fcortes626 said:
in another note i found a mini tutorial on how to port it to other devices if anyone wants to try it here is the guide. it is an SDK port. note: i did not write this guide i am just posting a link to the authors op. you can thank him and/or donate to him. here isorum.xda-developers.com/showpost.php?p=28020178&postcount=36 the link:
Click to expand...
Click to collapse
Link is broken, im not meaning to be a lazy pest.
sswb27 said:
Link is broken, im not meaning to be a lazy pest.
Click to expand...
Click to collapse
sorry about that :silly:
here you go: http://forum.xda-developers.com/showpost.php?p=28020178&postcount=36
fcortes626 said:
sorry about that :silly:
here you go: http://forum.xda-developers.com/showpost.php?p=28020178&postcount=36
Click to expand...
Click to collapse
i also have a deodexed system dump of jb if you want it let me know.
Source is out
Sent from my Galaxy Nexus using Tapatalk 2
Okay, so as you may see I'm a new member. I just recently read up on the CM9 and CM10 thread. and i see that you have to flash a radio in order for it to work properly. So when i went to download the radio on this guide ---> http://www.teamchopsticks.org/p/cm10-install-guide.html it said that the file wasnt available. So can anyone please hand me the radio that was provided? Im using T-mobile by the way.. Also, can i just flash another radio like this one ----> http://forum.xda-developers.com/showthread.php?t=1842207 does it matter? Thanks in advance.
guille0507 said:
Okay, so as you may see I'm a new member. I just recently read up on the CM9 and CM10 thread. and i see that you have to flash a radio in order for it to work properly. So when i went to download the radio on this guide ---> http://www.teamchopsticks.org/p/cm10-install-guide.html it said that the file wasnt available. So can anyone please hand me the radio that was provided? Im using T-mobile by the way.. Also, can i just flash another radio like this one ----> http://forum.xda-developers.com/showthread.php?t=1842207 does it matter? Thanks in advance.
Click to expand...
Click to collapse
Been using the UVLG3 with Potluck CM10 since just after it was posted. Seems to be solid.
dougm_tx said:
Been using the UVLG3 with Potluck CM10 since just after it was posted. Seems to be solid.
Click to expand...
Click to collapse
okay thanks.
dougm_tx said:
Been using the UVLG3 with Potluck CM10 since just after it was posted. Seems to be solid.
Click to expand...
Click to collapse
go to dark side rom page, he'sgot radios on there like uvle1 modified
Hi, I am not new to rooting and custom ROMs but it has been a while and the forum has so many roms that it is hard to decide which is the most stable.
Would you guys please recommend to me the best/most stable/most customizable(cyanogen) AOSP rom for this phone? Basically I'd want the best CM9 rom and hopefully CM10 once its stable.
Thanks
http://forum.xda-developers.com/showthread.php?t=1874374
charlie81 said:
http://forum.xda-developers.com/showthread.php?t=1874374
Click to expand...
Click to collapse
I second that. CM9 Beta 1 has been very stable for me.
Sent from my SPH-D710 using XDA
Interesting.. so thats in the original development section, whats the difference between original and android development?
Also, I'm a little lost on the whole recovery thing... can someone please explain it to me and how I can get the safe clockwork for my s2 so I can flash the CM9 you guys posted? My baseband is the FH13
Edit: What do you guys think about AOKP? I loved it when i had my evo... http://forum.xda-developers.com/showthread.php?t=1514665
Can I follow the simple steps in that post? Any requirements beforehand?
I have not seen a consistent explanation about the difference between the Android and original development forums.
I have not tried AOKP. That particular version you linked is no longer being developed. There is a newer Jelly Bean build here:
http://forum.xda-developers.com/showthread.php?t=1881046
Sent from my SPH-D710 using xda app-developers app
churka said:
Interesting.. so thats in the original development section, whats the difference between original and android development?
Also, I'm a little lost on the whole recovery thing... can someone please explain it to me and how I can get the safe clockwork for my s2 so I can flash the CM9 you guys posted? My baseband is the FH13
Edit: What do you guys think about AOKP? I loved it when i had my evo... http://forum.xda-developers.com/showthread.php?t=1514665
Can I follow the simple steps in that post? Any requirements beforehand?
Click to expand...
Click to collapse
1. I believe the difference between the to sections is that Original development is for AOSP based roms while android development is for roms based of stock or leaked firmware. That being said i dont think that many people understand that when they post and it has been kind of a Cluster f.
2. Are you currently on the OTA? you will need to odin a kernel that has a working recovery with it. If youre going to another rom right away it may be easiest to odin EL26 cwm, then load into recovery and flash because this will install the kernel/recovery packaged in the rom.
3. Ive used AOKP some and its pretty nice but i am one that likes to stay with a rom that still has activity. That way if i have problem there may be a chance that it is going to get fixed. But if you are ok with a few problems here and there go ahead and test out CM10 or sbrissens AOSP.
mwcarnage said:
I have not seen a consistent explanation about the difference between the Android and original development forums.
I have not tried AOKP. That particular version you linked is no longer being developed. There is a newer Jelly Bean build here:
http://forum.xda-developers.com/showthread.php?t=1881046
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Alright thanks for help!
thecrx said:
1. I believe the difference between the to sections is that Original development is for AOSP based roms while android development is for roms based of stock or leaked firmware. That being said i dont think that many people understand that when they post and it has been kind of a Cluster f.
2. Are you currently on the OTA? you will need to odin a kernel that has a working recovery with it. If youre going to another rom right away it may be easiest to odin EL26 cwm, then load into recovery and flash because this will install the kernel/recovery packaged in the rom.
3. Ive used AOKP some and its pretty nice but i am one that likes to stay with a rom that still has activity. That way if i have problem there may be a chance that it is going to get fixed. But if you are ok with a few problems here and there go ahead and test out CM10 or sbrissens AOSP.
Click to expand...
Click to collapse
1. Yeah I was going towards that conclusion but I dont think people understand it either.
2. I already flashed CM9. I used the mobile odin method in this link: http://e4gtcm.blogspot.com/p/cm9-install-guide.html
I flashed the kernel and I got stuck on recovery and couldnt get back to my regular rom. I was just wanting to get a recovery then I mounted the storage and put CM9 and gapps and flashed away. Now im running CM9 and its flawless.
3. Can you link me sbrissens AOSP? Thanks!
churka said:
Alright thanks for help!
1. Yeah I was going towards that conclusion but I dont think people understand it either.
2. I already flashed CM9. I used the mobile odin method in this link: http://e4gtcm.blogspot.com/p/cm9-install-guide.html
I flashed the kernel and I got stuck on recovery and couldnt get back to my regular rom. I was just wanting to get a recovery then I mounted the storage and put CM9 and gapps and flashed away. Now im running CM9 and its flawless.
3. Can you link me sbrissens AOSP? Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=29711677
Sent from my SPH-D710 using xda premium
Thanks
Sent from my SPH-D710 using XDA Premium HD app
I really like the ability to use the HTC logo as a button, but the only way i know how to do this is the slim bean rom. So my question is, anyway to get this function on a sense based rom? All info would be greatly appreciated. thanks
delete
Androcles said:
there are many kernels for htc one... check the links below.
http://forum.xda-developers.com/showthread.php?t=2249774
http://forum.xda-developers.com/showthread.php?t=2307371
http://forum.xda-developers.com/showthread.php?t=2255900
Click to expand...
Click to collapse
Woah there!!!!!
OP DO NOT FLASH THOSE KERNELS!
You could brick!
Never flash anything that was not made specifically for your device. If you bother to read the first post in most of those threads they specifically say that Verizon and sprint are not supported.
Please do not post links to potential harmful threads.
We will have custom kernels as soon as HTC releases kernel source for our device. If you can't wait that long then a few of the AOSP ROMs have the HTC logo working as a button.
definitly not flashing any of those haha.
but thank you both for the responses
I'm sorry. didn't notice that. I flashed the aosp one on mine...work pretty well.
Androcles said:
I'm sorry. didn't notice that. I flashed the aosp one on mine...work pretty well.
Click to expand...
Click to collapse
Thanks for editing your post.
None of those kernels were made for our device and could potentially break stuff now that we are s-off.
GrayTheWolf said:
Thanks for editing your post.
None of those kernels were made for our device and could potentially break stuff now that we are s-off.
Click to expand...
Click to collapse
The aosp one works well.
Androcles said:
The aosp one works well.
Click to expand...
Click to collapse
How were you able to run a kernel made for a different variation?
Sent from my HTC6500LVW using Tapatalk
refreblast said:
How were you able to run a kernel made for a different variation?
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
flashed it month ago. no any problem. just flash it. i don't know about the google edition and sense, but aosp works
http://forum.xda-developers.com/showthread.php?t=2236121
That is the kernel I using on cm10.2. of course, I'm on verizon.
VanirAOSP uses a custom kernel that allows the HTC Logo to be used as a sleep/wake button.