Develop Bugs

[Q] [motorola Defy] STUCK on M Logo [HELP!]

Ok so here is what happened:
I'm a very beginner to Android. And my Defy is rooted.
Then I found this: http://forum.xda-developers.com/showthread.php?t=977989&page=1
I thought it would be cool to have a gray statusbar.. So I went to recovery, and applied the "Barebones_13-signed.zip" renamed update.zip
It said installation successful (i think) then I rebooted my phone.
Now it's STUCK on the M logo!!!
I really don't know what to do :'(
Tried everything;
Remove battery and reboot.
Plugged phone and reboot.
Went to bootloader (I even don't know what's that )
PLEASE HELP ME :'(

ok try going to stock recovery and wipe the date and cache it will help in a normal boot loop or else
Try flashing a new sbf if the above method fails or pm me with ur gtalk id i ll help u out

pritesh_100_in said:
ok try going to stock recovery and wipe the date and cache it will help in a normal boot loop or else
Try flashing a new sbf if the above method fails or pm me with ur gtalk id i ll help u out
Click to expand...
Click to collapse
mm i can't go to recovery (it show me a white triangle with an exclamation mark)
But i can go to bootloader...
Any hints?
:'(

Going into Bootloader is enough
U should download the sbf below that article,then use RSD Lite to flash the sbf file into ur phone when ur phone is under bootloader mode

Did this and it worked
THANK YOU!!
Installed stock 2.2 but my phone becomes more laggy... maybe becuz I couldn't wipe data..

alfchin said:
Going into Bootloader is enough
U should download the sbf below that article,then use RSD Lite to flash the sbf file into ur phone when ur phone is under bootloader mode
Click to expand...
Click to collapse
Did this and it worked
THANK YOU!!
Installed stock 2.2 but my phone becomes more laggy... maybe becuz I couldn't wipe data..

try installing the custom rom again, and go into stock recovery. when you see the little triangle press vol + and vol - at the same time. youll get a menu(navigate with the volume keys). go to wipe data and press the screen lock key(the one at the top) reboot, then youre sorted.

Bricked Phone?

My friend was trying to flash Pay's ROM, on his MD525 Deblur.
He rooted it correctly, he then made a backup using system recovery, then he flashed it to 3.4.2-164 Motorola SBF with RSD Lite in bootloader mode..
After that he Re-rooted it again with SuperOneClickRoot.
Then he installed 2ndInit recovery installer.
When he was trying to flash the ROM.zip.. It showed an error, because 2ndInit 1.6 doesnt support Pay's rom.
He then tried to restore using system recovery.. the restore was successful. but when he rebooted, it is stuck at the red motorola logo and aftter 30secs it reboots again. and the process continues... So is it bricked?
I think he can now install the Nordic 3.4.2-177 and use cyanogen mod on it..
That can unbrick his phone right?
PS: Sorry for my bad english!

Wipe data in stock recovery, and than reboot and flash SBF via RSD...

ifu said:
Wipe data in stock recovery, and than reboot and flash SBF via RSD...
Click to expand...
Click to collapse
How to wipe data in stock recovery?
Anyways.. he flashed the sbf and he is now installing cyanogen..
I heard that the battery drains fast with cyanogen rom is it true?
If it is.. then which ROM he should opt to?

In Beta 5.1 battery drain problem was there, but in Beta 6 peoples say its solved....And i m using MiUi.

RuDe.. said:
How to wipe data in stock recovery?
Click to expand...
Click to collapse
To get into stock recovery:
Turn off the phone
Press the down volume button together with the on button.
When the phone turns on, and you get a droid image, touch the bottom right corner of the screen. If nothing happens, press the up and down volume buttons together.
This will get you into stock recovery. It has wipe data menus.

ifu said:
In Beta 5.1 battery drain problem was there, but in Beta 6 peoples say its solved....And i m using MiUi.
Click to expand...
Click to collapse
Any noticeable differences between CM7 and MiUi?
Zach21 said:
To get into stock recovery:
Turn off the phone
Press the down volume button together with the on button.
When the phone turns on, and you get a droid image, touch the bottom right corner of the screen. If nothing happens, press the up and down volume buttons together.
This will get you into stock recovery. It has wipe data menus.
Click to expand...
Click to collapse
Thanks for the Reply.
His phone sbf version was 2.59 eclair.. he directly flashed it to 3.4.2-164.
He lost the downgrade ability right? Or else can he still downgrade?

After successfully installing cm7, he made a backup using system recovery..
Now again the phones is stuck at the red motorola logo.. its stuck frm around 30 mins..
he also tried removing battery and rebooting but non working..

-Download 2ndInt Recovery Installer from Market or from Xda
-start the app, click install, wait for the led to turn green, disable usb debugging in the settings and reboot 2 times.
download CyanogenMod7 and put it on sdcard
- wait for the blue Led and then press "Volume down"
- "[Open Recovery] start."
- wipe "data/factory reset"
- "install zip from sdcard" ->- "choose zip from sdcard"
- reboot
- wait for blue led "Volume down" and then choose boot "[2ND-INIT] boot"
- done

Double Post..

Thanks for the reply!
But pls read my post again.. After successfully installing cyanogen mod 7..
He thought to made a backup, and after successful backup using system recovery.. after the reboot the phone was stuck.
Now he flashed it again to 3.4.1-177 sbf.. it completed successfully, but still it is stuck at android logo now.. What should he do?

After installing CM7 did choose [2ND-INIT] boot...?

Now the prob is that he was flashing the sbf on low battery.. I told him to recharge before doing that.. he didnt listen.. now his battery is not charging..

Try wall Charger...

Still cant get it to work.. Scared of doing this method http://forum.xda-developers.com/showthread.php?t=892026
So any other methods?

RuDe.. said:
Still cant get it to work.. Scared of doing this method http://forum.xda-developers.com/showthread.php?t=892026
So any other methods?
Click to expand...
Click to collapse
No idea other than this...Sorry

The battery problem is fixed now..
But now it is stuck at the android logo..
What happened is I was trying to make a backup using system recovery on cm7..
The backup was successful.. but from then it is not booting up...
tried wiping data/cache and factery reset.. still doesnt work..
tried to flash again with 3.4.2-177 nordic rom.. it shows booting 100%.. and also shows to manually power up this phone.. Still it is stuck at android logo..

Got everything under control for now..
Thanks for the help guys..

Defy not working :(

Hello everyone,
first of all,I want to thank all those involved in this forums.
I'm here trying to have a solution for my defy..I bought it 1 week ago and I used it only the first day!!
My friend told me that I can upgrade android to 2.3,and I can get more apps with 2.3,so he tried to upgrade it but it didn't work.
once I turn on the device,Motorola Logo appear,then Galnet MIUI appear,and it loops unlimited times,it load for 4 seconds then loop again..
after..I told the person who made the video "how to upgrade to 2.3" about my problem..he recommended me to flash by RSD Lite and 3.4.3_11-Stock.UKTmobile_BLUR.sbf ,and then I did everything as he told me but it didn't work..this time I get White Motorola logo with Blur word and it loops unlimited time.
then I flashed again but this time I replaced the sbf file with "JRDNEM_U3_3.4.3-36-1.1.sbf",also it didn't work..this time I get Red Motorola Logo then ANDROID word.it seems to be loop.
I don't know whats wrong,can someone tell me how exactly to flash ?
Because when the program says Please Manually Power up this Phone..idk what to do,it's already on!!so I remove the battery then I power up.
help me please I was happy with 2.2,can I get my defy back to 2.2 just like when I bought it??
my english bad sorry
thanks a lot,

Boot into stock recovery and wipe data / cache. Then flash again any 2.2.2 sbf file. To update into stock gingerbread, your phone must have custom recovery to perform the nandroid restore follow with flashing fixed sbf.
Sent from my awesome Moto Defy: Stock Rooted Gingerbread 2.3.4 - XDA Premium

farsight73 said:
Boot into stock recovery and wipe data / cache. Then flash again any 2.2.2 sbf file. To update into stock gingerbread, your phone must have custom recovery to perform the nandroid restore follow with flashing fixed sbf.
Sent from my awesome Moto Defy: Stock Rooted Gingerbread 2.3.4 - XDA Premium
Click to expand...
Click to collapse
Thanks a lot for replying,
Please excuse me iam really noob
I used to boot into stock recovery by Pressing [Volume Down] when i see Blue Led Light,but it doesn't work any more,help plz.

UP T_T,Please help.

The blue led light is the 2nd-init sequence to enter into custom boot menu.
It definitely gone when you flash another full sbf. But then you have the stock recovery to perform the full wipe.
Booting into stock: Start up phone and press vol- until android logo and follow with pressing vol- and vol+. Now you should be in stock recovery. Do the full factory wipe here.
Next boot into bootloader: Start up phone and press vol+ until you see bootloader screen. Don't worry anything stating in this screen.
Next flash your phone to froyo 2.2.2 sbf. If it still failed. You need to use another Rsdlite version or flash with another PC. It happen alot of peoples having flashing issue which is cause by incompatible PC.(Dont ask me why).
Make sure battery is in good state before flashing.

THanks a lot,I used differant farmware and it works!
thanks farsight73,

defy not working
Hi,
I instaled cm9 on my defy. Now when I try to turn it on, can't. Also cant open recovery, cause there is error: "busybox was not created in footfs". And when I open recoveri, it says: "E:Error in /system/bootmenu/script/recovery.sh (result: no such file or directory) Could someone please help me?

mateja22 said:
Hi,
I instaled cm9 on my defy. Now when I try to turn it on, can't. Also cant open recovery, cause there is error: "busybox was not created in footfs". And when I open recoveri, it says: "E:Error in /system/bootmenu/script/recovery.sh (result: no such file or directory) Could someone please help me?
Click to expand...
Click to collapse
Please, read the thread, farsight73 posted the solution

LeonardoJegigzem said:
Please, read the thread, farsight73 posted the solution
Click to expand...
Click to collapse
Didn't work for me :/ I still have the blue light... but I can't go in stock recovery... after that there is exclamation mark and nothing happens...

mateja22 said:
Didn't work for me :/ I still have the blue light... but I can't go in stock recovery... after that there is exclamation mark and nothing happens...
Click to expand...
Click to collapse
Can you access 2ndinit or Stock recovery by pressing both the volume key when blue light flashes??
I'm sure you can access Boot loader. If recovery not working then you may flash your phone with Froyo SBF using RSD lite.
Refer to below mentioned article for more info on this:
http://forum.xda-developers.com/showthread.php?t=1216982
Hope this helps!!

Rajneeshgadge17 said:
Can you access 2ndinit or Stock recovery by pressing both the volume key when blue light flashes??
I'm sure you can access Boot loader. If recovery not working then you may flash your phone with Froyo SBF using RSD lite.
Refer to below mentioned article for more info on this:
http://forum.xda-developers.com/showthread.php?t=1216982
Hope this helps!!
Click to expand...
Click to collapse
I resolved it... thanks!

mateja22 said:
I resolved it... thanks!
Click to expand...
Click to collapse
Congrats!!

Unable to get into Clockworkmod

Hi Guys,
I am not sure if this exists on the forums but I am unable to find a solution.
I am trying to boot into my CWM. When I reboot and hit the power and volume up button it takes me to the Motorola flash tool. If I reboot with the power button and volume down it takes me to system recovery. I somehow got it into CWM but have no idea what I pressed.
Any ideas?
Thanks

vol down not vol up

Have u installed cwr?
Sent from my MB525 using xda premium

aks.techscience said:
Have u installed cwr?
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
I have it installed. I managed to install it and get into it previously with 2nd init. but without 2nd init I am battling.
I have tried volume down. that is when I get the "android system recovery utility" and not CWM

hey boswald did u solve ur problem ? and how please? coz i think im having the same problem once i install 2ndInit it says success but i never get into CWM and my phone keep rebooting on Motorola Logo and i have to flash again !.

Hey,
I landed up re-flashing. I then installed the new bootmenu and CWM (5). I then installed Sndinit and managed to get into the custom recovery where I installed CM9 and the google apps.
When I now hit the reboot in CM9 I have the option to go into recovery from there.
I did read somewhere though that when the little light goes blue to hit the down arrow and that is suppose to take you into the custom recovery. That worked for me afterwards but not sure if it was because I re-flashed and installed again.
Hope that helps.

How did you install a new bootmenu please ???

Monzer, when you install bootmenu are you installing the .apk and then opening the app and then clicking to install 2nd init? This is the right procedure! after you do this reboot your phone and watch for blue led to flash during boot, hit volume down once it flashes blue.
What 2nd init version are you installing? here is the latest http://forum.xda-developers.com/attachment.php?attachmentid=792601&d=1322064151
Are you trying to flash CM7?
There is a very old version of CWM that should be suitable if all else fails you. It should work just fine to flash CM7 but not so sure about CM9. However if you want to flash CM9 You could use this old version of CWM to flash CM7 which will in turn install a new version of 2nd init which is definitely suitable for flashing CM9. This old CWM "might" work for flashing CM9 but I dunno if I would try or not! Download in my attachment below!
You MUST enable USB debugging to install.
copy the apk to your sdcard and use a file manager to install it then open the app in your app drawer and choose to install the custom recovery (with USB dubugging ON)
THIS STEP IS VERY IMPORTANT!!!
AFTER INSTALLING THE CUSTOM RECOVERY DISABLE USB DEBUGGING.
You enter CWM by again opening the app and choosing reboot to recovery (with USB debuggind OFF)

thanks alot zyxwvut for replaying i really appreciate it , well im trying to install MS2Ginger , and the bootmenu i'v downloaded there was no .apk file in it ;s , there is META-INF and System folders in it , ok i'v downloaded the custom recovery u gave me should this do the work ?? i thought i can only flash CM7 and MS2Ginger only using 2ndInit !! so now i can flash MS2Ginger using custom recovery instead of using 2ndInit right ???

The old cwm I provided will not work for ms2ginger 2.1 because it doesn't give you options to restore devtree etc. You should install 2nd init provided by walter79 on the ms2ginger page for this. I don't quite understand why 2nd unit wont install for you. I've never had a problem. The old cwm I provided should be used only to install cm7
EDIT: the old cwm should work just fine to install ms2ginger 2.0 lite but not ms2ginger 2.1
Btw the old cwm backup directory is: apkrev/backup
Instead of: clockworkmod/backup
Honestly try the link for 2nd init I provided in my post I just can't imagine why it wont work. Seems crazy.
Sent from my MB525 using XDA App

I really dont know whats wrong with 2ndInit i did install it once long time ago , could it be coz i fully flashed to 2.3.4 and i downgraded ? when i install 2ndInit it says success but i still can read that recovery 2ndinit NOT currntly installed the led is green tho but once i reboot , it keeps rebooting over and over and the only way to fix it is going thro the long downgrading method that starting from flashing the unique chinese eclair ...ect and i did all 2ndint versions not sure what els to do ! is there any other way to flash MS2Ginger or maybe other way to install 2ndint not by WIFI , i just dont understand why they use internet connection to dl it -_- thanks for your time btw .

You never even get a blue light when rebooting? I don't know if the downgrade from 2.3.4 is your issue or not, maybe. The downgrade is a dirty method and could cause problems maybe but idk because I never flashed 2.3.4 I can ask around the Dev section for you
Sent from my MB525 using XDA App

nope never get a blue light , will yo do that ? it would be a life saver dude
Edit : one more thing is 2ndInit installed once it say success and the led turn into green regardless that it wrote its not currently installed , and how to install 2ndinit using url it might work who knows, a desperate man would try anything

boswald said:
Hi Guys,
I am not sure if this exists on the forums but I am unable to find a solution.
I am trying to boot into my CWM. When I reboot and hit the power and volume up button it takes me to the Motorola flash tool. If I reboot with the power button and volume down it takes me to system recovery. I somehow got it into CWM but have no idea what I pressed.
Any ideas?
Thanks
Click to expand...
Click to collapse
None of the methods you are using can actually get you into cwm. The correct method is:
1. Switch off the phone. After the phone is completely powered down:
2. Long press the power button.
3. Wait for the blue led light to appear.
4. When it appears, immediately press Vol. Down button.
5. Now you'll find yourself in cwm bootmenu.
Note : Pressing power and Vol. Down button on powering up will only take you to the stock recovery.
Sent from my MB525 using XDA App

Is my MB526 bricked?

Was running CM10-20120804-NIGHTLY-mb526 successfully, but having some performance issues, by following this process:
1) Go to Stable Recovery.
2) Wipe data/factory reset, wipe cache and go to advanced ► Wipe dalvik.
3) Go to Install zip from sdcard ► Choose zip from sd card.
4) Flash gb Kernel (JUST FOR DEFY RED LENS USERS).
5) Flash CM10-2012xxxx-NIGHTLY-mb526.zip.
6) Flash Gapps and Battery fix for red lens.
7) Wipe Cache and Dalvik again (recommended).
8) Restart.
(http://forum.xda-developers.com/showthread.php?t=1795647)
I only thing I hadn't done was flash the gb Kernel, so I thought I'd try that to ensure I followed the full process. I received advice to reinstall this kernel-froyo-222-179-4-signed.zip.
However, after following to above steps, this time with the mentioned kernel, I get this error:
Bootloader
09.10
Err:A5,70,00,23
Battery OK
OK to Program
Connect USB
Data Cable
Now I'm panicking!! When I turn on the phone, it doesn't even get to the second Motorola logo screen where you can enter recovery mode. Was this an incorrect kernel? Any idea how to fix this? BTW, I'm now at work and have no USB cable.
Really worried I've bricked it by installing the incorrect kernel...
EDIT: I've also tried entering recovery from Vol- and Power, but to no avail
I'm hoping that maybe RSD Lite can fix this, but not sure what kernel to flash. I think originally I might have flashed this kernel kernel-froyo-222-179-4-signed after using SuperOneClick, but can't be sure.
Any help would be very much appreciated!

Try by reinstalling stock firmware using oem tool/software.
Sent from my MK16i using xda app-developers app

chiragvagh said:
Try by reinstalling stock firmware using oem tool/software.
Sent from my MK16i using xda app-developers app
Click to expand...
Click to collapse
Do you have a link for these please?

Defy+ users need not flash any kernel to get cm9 or cm10 working. Flashing the kernel will cause this error.

super noob bros said:
Defy+ users need not flash any kernel to get cm9 or cm10 working. Flashing the kernel will cause this error.
Click to expand...
Click to collapse
Any idea how to fix it?

Flash your stock SBF back. You can find your stock ROM SBFs here:
http://sbf.droid-developers.org/umts_jordanplus/list.php

super noob bros said:
Defy+ users need not flash any kernel to get cm9 or cm10 working. Flashing the kernel will cause this error.
Click to expand...
Click to collapse
andr0idfreak said:
Flash your stock SBF back. You can find your stock ROM SBFs here:
http://sbf.droid-developers.org/umts_jordanplus/list.php
Click to expand...
Click to collapse
I see no stock Telstra Australia SBF there. I was also of the belief that I couldn't go back to stock with a Defy+.

I can see some SBF for AU. Try flashing that. I cannot guarantee anything though.
http://sbf.droid-developers.org/umt...AJRDNGIBRANZ_P020_A026_HWp3_Service1FF.sbf.gz
http://sbf.droid-developers.org/umt...3C_USAJRDNGIBRANZ_P021_A030_Service1FF.sbf.gz
Try the 1321 version first as it is BL6 and easily rootable. If that too gives bootloader error then probably you are on BL7 and the second one is the only way out.

andr0idfreak said:
I can see some SBF for AU. Try flashing that. I cannot guarantee anything though.
http://sbf.droid-developers.org/umt...AJRDNGIBRANZ_P020_A026_HWp3_Service1FF.sbf.gz
http://sbf.droid-developers.org/umt...3C_USAJRDNGIBRANZ_P021_A030_Service1FF.sbf.gz
Try the 1321 version first as it is BL6 and easily rootable. If that too gives bootloader error then probably you are on BL7 and the second one is the only way out.
Click to expand...
Click to collapse
Tried downloading those a few times, but they seem to be corrupt.
Any other SBFs worth trying other than JORDN_U3_97.21.51.sbf which doesn't seem to work? Everything seems fine when using it in RSD, and it says it's passed, but then the phone simply won't power up. Any ideas?

If it doesn't power up after flashing SBF, try this:
1. Remove battery.
2. Keep the vol - pressed and then insert battery.
3. Then press the power button, keeping the vol- pressed.
4. You should see a triangle logo with exclamation mark, that's the stock recovery.
5. Press vol+ and Vol- key together to get various options.
6. Try wiping data and cache/factory reset.

andr0idfreak said:
If it doesn't power up after flashing SBF, try this:
1. Remove battery.
2. Keep the vol - pressed and then insert battery.
3. Then press the power button, keeping the vol- pressed.
4. You should see a triangle logo with exclamation mark, that's the stock recovery.
5. Press vol+ and Vol- key together to get various options.
6. Try wiping data and cache/factory reset.
Click to expand...
Click to collapse
No good - phone won't turn on at all, nothing but black screen

Ok. Try the same procedure but with vol+ instead till step 3, to get onto bootloader mode. Then try flashing the SBF again.

Finally back up and running
Flashed this ROM http://sbf.droid-developers.org/umt...3C_USAJRDNGIBRANZ_P021_A030_Service1FF.sbf.gz and it worked!
Thanks for all your help people