Unable to get into Clockworkmod - Defy General

Hi Guys,
I am not sure if this exists on the forums but I am unable to find a solution.
I am trying to boot into my CWM. When I reboot and hit the power and volume up button it takes me to the Motorola flash tool. If I reboot with the power button and volume down it takes me to system recovery. I somehow got it into CWM but have no idea what I pressed.
Any ideas?
Thanks

vol down not vol up

Have u installed cwr?
Sent from my MB525 using xda premium

aks.techscience said:
Have u installed cwr?
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
I have it installed. I managed to install it and get into it previously with 2nd init. but without 2nd init I am battling.
I have tried volume down. that is when I get the "android system recovery utility" and not CWM

hey boswald did u solve ur problem ? and how please? coz i think im having the same problem once i install 2ndInit it says success but i never get into CWM and my phone keep rebooting on Motorola Logo and i have to flash again !.

Hey,
I landed up re-flashing. I then installed the new bootmenu and CWM (5). I then installed Sndinit and managed to get into the custom recovery where I installed CM9 and the google apps.
When I now hit the reboot in CM9 I have the option to go into recovery from there.
I did read somewhere though that when the little light goes blue to hit the down arrow and that is suppose to take you into the custom recovery. That worked for me afterwards but not sure if it was because I re-flashed and installed again.
Hope that helps.

How did you install a new bootmenu please ???

Monzer, when you install bootmenu are you installing the .apk and then opening the app and then clicking to install 2nd init? This is the right procedure! after you do this reboot your phone and watch for blue led to flash during boot, hit volume down once it flashes blue.
What 2nd init version are you installing? here is the latest http://forum.xda-developers.com/attachment.php?attachmentid=792601&d=1322064151
Are you trying to flash CM7?
There is a very old version of CWM that should be suitable if all else fails you. It should work just fine to flash CM7 but not so sure about CM9. However if you want to flash CM9 You could use this old version of CWM to flash CM7 which will in turn install a new version of 2nd init which is definitely suitable for flashing CM9. This old CWM "might" work for flashing CM9 but I dunno if I would try or not! Download in my attachment below!
You MUST enable USB debugging to install.
copy the apk to your sdcard and use a file manager to install it then open the app in your app drawer and choose to install the custom recovery (with USB dubugging ON)
THIS STEP IS VERY IMPORTANT!!!
AFTER INSTALLING THE CUSTOM RECOVERY DISABLE USB DEBUGGING.
You enter CWM by again opening the app and choosing reboot to recovery (with USB debuggind OFF)

thanks alot zyxwvut for replaying i really appreciate it , well im trying to install MS2Ginger , and the bootmenu i'v downloaded there was no .apk file in it ;s , there is META-INF and System folders in it , ok i'v downloaded the custom recovery u gave me should this do the work ?? i thought i can only flash CM7 and MS2Ginger only using 2ndInit !! so now i can flash MS2Ginger using custom recovery instead of using 2ndInit right ???

The old cwm I provided will not work for ms2ginger 2.1 because it doesn't give you options to restore devtree etc. You should install 2nd init provided by walter79 on the ms2ginger page for this. I don't quite understand why 2nd unit wont install for you. I've never had a problem. The old cwm I provided should be used only to install cm7
EDIT: the old cwm should work just fine to install ms2ginger 2.0 lite but not ms2ginger 2.1
Btw the old cwm backup directory is: apkrev/backup
Instead of: clockworkmod/backup
Honestly try the link for 2nd init I provided in my post I just can't imagine why it wont work. Seems crazy.
Sent from my MB525 using XDA App

I really dont know whats wrong with 2ndInit i did install it once long time ago , could it be coz i fully flashed to 2.3.4 and i downgraded ? when i install 2ndInit it says success but i still can read that recovery 2ndinit NOT currntly installed the led is green tho but once i reboot , it keeps rebooting over and over and the only way to fix it is going thro the long downgrading method that starting from flashing the unique chinese eclair ...ect and i did all 2ndint versions not sure what els to do ! is there any other way to flash MS2Ginger or maybe other way to install 2ndint not by WIFI , i just dont understand why they use internet connection to dl it -_- thanks for your time btw .

You never even get a blue light when rebooting? I don't know if the downgrade from 2.3.4 is your issue or not, maybe. The downgrade is a dirty method and could cause problems maybe but idk because I never flashed 2.3.4 I can ask around the Dev section for you
Sent from my MB525 using XDA App

nope never get a blue light , will yo do that ? it would be a life saver dude
Edit : one more thing is 2ndInit installed once it say success and the led turn into green regardless that it wrote its not currently installed , and how to install 2ndinit using url it might work who knows, a desperate man would try anything

boswald said:
Hi Guys,
I am not sure if this exists on the forums but I am unable to find a solution.
I am trying to boot into my CWM. When I reboot and hit the power and volume up button it takes me to the Motorola flash tool. If I reboot with the power button and volume down it takes me to system recovery. I somehow got it into CWM but have no idea what I pressed.
Any ideas?
Thanks
Click to expand...
Click to collapse
None of the methods you are using can actually get you into cwm. The correct method is:
1. Switch off the phone. After the phone is completely powered down:
2. Long press the power button.
3. Wait for the blue led light to appear.
4. When it appears, immediately press Vol. Down button.
5. Now you'll find yourself in cwm bootmenu.
Note : Pressing power and Vol. Down button on powering up will only take you to the stock recovery.
Sent from my MB525 using XDA App

Related

Bricked Phone?

My friend was trying to flash Pay's ROM, on his MD525 Deblur.
He rooted it correctly, he then made a backup using system recovery, then he flashed it to 3.4.2-164 Motorola SBF with RSD Lite in bootloader mode..
After that he Re-rooted it again with SuperOneClickRoot.
Then he installed 2ndInit recovery installer.
When he was trying to flash the ROM.zip.. It showed an error, because 2ndInit 1.6 doesnt support Pay's rom.
He then tried to restore using system recovery.. the restore was successful. but when he rebooted, it is stuck at the red motorola logo and aftter 30secs it reboots again. and the process continues... So is it bricked?
I think he can now install the Nordic 3.4.2-177 and use cyanogen mod on it..
That can unbrick his phone right?
PS: Sorry for my bad english!
Wipe data in stock recovery, and than reboot and flash SBF via RSD...
ifu said:
Wipe data in stock recovery, and than reboot and flash SBF via RSD...
Click to expand...
Click to collapse
How to wipe data in stock recovery?
Anyways.. he flashed the sbf and he is now installing cyanogen..
I heard that the battery drains fast with cyanogen rom is it true?
If it is.. then which ROM he should opt to?
In Beta 5.1 battery drain problem was there, but in Beta 6 peoples say its solved....And i m using MiUi.
RuDe.. said:
How to wipe data in stock recovery?
Click to expand...
Click to collapse
To get into stock recovery:
Turn off the phone
Press the down volume button together with the on button.
When the phone turns on, and you get a droid image, touch the bottom right corner of the screen. If nothing happens, press the up and down volume buttons together.
This will get you into stock recovery. It has wipe data menus.
ifu said:
In Beta 5.1 battery drain problem was there, but in Beta 6 peoples say its solved....And i m using MiUi.
Click to expand...
Click to collapse
Any noticeable differences between CM7 and MiUi?
Zach21 said:
To get into stock recovery:
Turn off the phone
Press the down volume button together with the on button.
When the phone turns on, and you get a droid image, touch the bottom right corner of the screen. If nothing happens, press the up and down volume buttons together.
This will get you into stock recovery. It has wipe data menus.
Click to expand...
Click to collapse
Thanks for the Reply.
His phone sbf version was 2.59 eclair.. he directly flashed it to 3.4.2-164.
He lost the downgrade ability right? Or else can he still downgrade?
After successfully installing cm7, he made a backup using system recovery..
Now again the phones is stuck at the red motorola logo.. its stuck frm around 30 mins..
he also tried removing battery and rebooting but non working..
-Download 2ndInt Recovery Installer from Market or from Xda
-start the app, click install, wait for the led to turn green, disable usb debugging in the settings and reboot 2 times.
download CyanogenMod7 and put it on sdcard
- wait for the blue Led and then press "Volume down"
- "[Open Recovery] start."
- wipe "data/factory reset"
- "install zip from sdcard" ->- "choose zip from sdcard"
- reboot
- wait for blue led "Volume down" and then choose boot "[2ND-INIT] boot"
- done
Double Post..
Thanks for the reply!
But pls read my post again.. After successfully installing cyanogen mod 7..
He thought to made a backup, and after successful backup using system recovery.. after the reboot the phone was stuck.
Now he flashed it again to 3.4.1-177 sbf.. it completed successfully, but still it is stuck at android logo now.. What should he do?
After installing CM7 did choose [2ND-INIT] boot...?
Now the prob is that he was flashing the sbf on low battery.. I told him to recharge before doing that.. he didnt listen.. now his battery is not charging..
Try wall Charger...
Still cant get it to work.. Scared of doing this method http://forum.xda-developers.com/showthread.php?t=892026
So any other methods?
RuDe.. said:
Still cant get it to work.. Scared of doing this method http://forum.xda-developers.com/showthread.php?t=892026
So any other methods?
Click to expand...
Click to collapse
No idea other than this...Sorry
The battery problem is fixed now..
But now it is stuck at the android logo..
What happened is I was trying to make a backup using system recovery on cm7..
The backup was successful.. but from then it is not booting up...
tried wiping data/cache and factery reset.. still doesnt work..
tried to flash again with 3.4.2-177 nordic rom.. it shows booting 100%.. and also shows to manually power up this phone.. Still it is stuck at android logo..
Got everything under control for now..
Thanks for the help guys..

Defy not working :(

Hello everyone,
first of all,I want to thank all those involved in this forums.
I'm here trying to have a solution for my defy..I bought it 1 week ago and I used it only the first day!!
My friend told me that I can upgrade android to 2.3,and I can get more apps with 2.3,so he tried to upgrade it but it didn't work.
once I turn on the device,Motorola Logo appear,then Galnet MIUI appear,and it loops unlimited times,it load for 4 seconds then loop again..
after..I told the person who made the video "how to upgrade to 2.3" about my problem..he recommended me to flash by RSD Lite and 3.4.3_11-Stock.UKTmobile_BLUR.sbf ,and then I did everything as he told me but it didn't work..this time I get White Motorola logo with Blur word and it loops unlimited time.
then I flashed again but this time I replaced the sbf file with "JRDNEM_U3_3.4.3-36-1.1.sbf",also it didn't work..this time I get Red Motorola Logo then ANDROID word.it seems to be loop.
I don't know whats wrong,can someone tell me how exactly to flash ?
Because when the program says Please Manually Power up this Phone..idk what to do,it's already on!!so I remove the battery then I power up.
help me please I was happy with 2.2,can I get my defy back to 2.2 just like when I bought it??
my english bad sorry
thanks a lot,
Boot into stock recovery and wipe data / cache. Then flash again any 2.2.2 sbf file. To update into stock gingerbread, your phone must have custom recovery to perform the nandroid restore follow with flashing fixed sbf.
Sent from my awesome Moto Defy: Stock Rooted Gingerbread 2.3.4 - XDA Premium
farsight73 said:
Boot into stock recovery and wipe data / cache. Then flash again any 2.2.2 sbf file. To update into stock gingerbread, your phone must have custom recovery to perform the nandroid restore follow with flashing fixed sbf.
Sent from my awesome Moto Defy: Stock Rooted Gingerbread 2.3.4 - XDA Premium
Click to expand...
Click to collapse
Thanks a lot for replying,
Please excuse me iam really noob
I used to boot into stock recovery by Pressing [Volume Down] when i see Blue Led Light,but it doesn't work any more,help plz.
UP T_T,Please help.
The blue led light is the 2nd-init sequence to enter into custom boot menu.
It definitely gone when you flash another full sbf. But then you have the stock recovery to perform the full wipe.
Booting into stock: Start up phone and press vol- until android logo and follow with pressing vol- and vol+. Now you should be in stock recovery. Do the full factory wipe here.
Next boot into bootloader: Start up phone and press vol+ until you see bootloader screen. Don't worry anything stating in this screen.
Next flash your phone to froyo 2.2.2 sbf. If it still failed. You need to use another Rsdlite version or flash with another PC. It happen alot of peoples having flashing issue which is cause by incompatible PC.(Dont ask me why).
Make sure battery is in good state before flashing.
THanks a lot,I used differant farmware and it works!
thanks farsight73,
defy not working
Hi,
I instaled cm9 on my defy. Now when I try to turn it on, can't. Also cant open recovery, cause there is error: "busybox was not created in footfs". And when I open recoveri, it says: "E:Error in /system/bootmenu/script/recovery.sh (result: no such file or directory) Could someone please help me?
mateja22 said:
Hi,
I instaled cm9 on my defy. Now when I try to turn it on, can't. Also cant open recovery, cause there is error: "busybox was not created in footfs". And when I open recoveri, it says: "E:Error in /system/bootmenu/script/recovery.sh (result: no such file or directory) Could someone please help me?
Click to expand...
Click to collapse
Please, read the thread, farsight73 posted the solution
LeonardoJegigzem said:
Please, read the thread, farsight73 posted the solution
Click to expand...
Click to collapse
Didn't work for me :/ I still have the blue light... but I can't go in stock recovery... after that there is exclamation mark and nothing happens...
mateja22 said:
Didn't work for me :/ I still have the blue light... but I can't go in stock recovery... after that there is exclamation mark and nothing happens...
Click to expand...
Click to collapse
Can you access 2ndinit or Stock recovery by pressing both the volume key when blue light flashes??
I'm sure you can access Boot loader. If recovery not working then you may flash your phone with Froyo SBF using RSD lite.
Refer to below mentioned article for more info on this:
http://forum.xda-developers.com/showthread.php?t=1216982
Hope this helps!!
Rajneeshgadge17 said:
Can you access 2ndinit or Stock recovery by pressing both the volume key when blue light flashes??
I'm sure you can access Boot loader. If recovery not working then you may flash your phone with Froyo SBF using RSD lite.
Refer to below mentioned article for more info on this:
http://forum.xda-developers.com/showthread.php?t=1216982
Hope this helps!!
Click to expand...
Click to collapse
I resolved it... thanks!
mateja22 said:
I resolved it... thanks!
Click to expand...
Click to collapse
Congrats!!

HELP please!my defy is stucked with no rom!!

friends and i mean its stucked deep!
i was running cm7 full63 nightly and some app my brother download stuck the phone.i take it in my hands flash it again with wipes and wasent working good.then i go to the cwm again.i do 4 wipes(factory-cache-davlik-battery)and go to mounds and storage and do format chace-data-system!and that was for defy the death!
it downgrade my cwm from 5.something and i have <3e> and it cant find my rom on apply sdcard;update.zip to flash it,it says ,can't mound cache;recovery/log,it cant do nothink with this cwm!!
please help if you want!thank you!!
use rsd lite to flash a stock froyo rom... start from scratch....
Sent from my MB526 using xda premium
what is rsd is this rar http://forum.xda-developers.com/showthread.php?t=1348587?and how i do it?
ok i have download this rom http://www.mediafire.com/?op47dv8yo8iypj1 and the rsd litev5.6
what steps i must do to flash the rom?
alexanter the great said:
ok i have download this rom http://www.mediafire.com/?op47dv8yo8iypj1 and the rsd litev5.6
what steps i must do to flash the rom?
Click to expand...
Click to collapse
Install RSDLite on your PC. Use WinRAR or 7zip to decompress the. gz file you downloaded (there is an sbf file inside - the clean Froyo firmware you want to flash - and save it somewhere.
Take your Defy and press the power and volume up button and release after some seconds so that you enter the bootloader mode (you see some white text on black ground).
Connect the phone via USB with your PC with RSDLite running.
In RSDLite click the button with the three dots and open the sbf file you extracted.
Hit the start button. Now it starts flashing the firmware, takes a couple of minutes.
When it's done the phone reboots and is running a Motorola Froyo firmware (not rooted or something, it can't really be called a ROM). If you want you can root, install CWM again etc and put your ROM in it again.
Almost always when your Defy is doesn't boot anymore or is somehow broken softwarewise, you can use this method to repair it.
thank you for your time.
i have done this steps,i flash this rom with rsd,root it with superoneclick,but i cant install cwm recovery with rom manager so i cant flash cyannogen again.i have found a apk (flipout system recovery)it goes me to recovery but it not working good
how i install the correct cwm recovery for intalling any roms i want?
alexanter the great said:
thank you for your time.
i have done this steps,i flash this rom with rsd,root it with superoneclick,but i cant install cwm recovery with rom manager so i cant flash cyannogen again.i have found a apk (flipout system recovery)it goes me to recovery but it not working good
how i install the correct cwm recovery for intalling any roms i want?
Click to expand...
Click to collapse
If you want the recovery menu you need to install 2ndinit. http://goo.gl/5P89P
Open the app and install the recovery menu with it, then reboot (some say it is safer to reboot even two times). You get the blue LED after powering the phone on, you have to press volume down then. There you can get to the custom recovery and wipe data, cache, install zips from SD etc.
Arjoma said:
If you want the recovery menu you need to install 2ndinit. http://goo.gl/5P89P
Open the app and install the recovery menu with it, then reboot (some say it is safer to reboot even two times). You get the blue LED after powering the phone on, you have to press volume down then. There you can get to the custom recovery and wipe data, cache, install zips from SD etc.
Click to expand...
Click to collapse
yes it worked!
thank you very much my friend you where very helpfull!danken!!
alexanter the great said:
yes it worked!
thank you very much my friend you where very helpfull!danken!!
Click to expand...
Click to collapse
danken?
Arjoma said:
danken?
Click to expand...
Click to collapse
i dont now!thanks in german!
alexanter the great said:
i dont now!thanks in german!
Click to expand...
Click to collapse
Ah, I almost thought that you meant that It should rather be "Danke"
Ορίστε, κανένα πρόβλημα! ("You're welcome, no problem" in Greek?)
its:παρακαλω κανενα προβλημα!!
i translate it for be sure and it wrote me danken, and made me curious,but i was know it is danke!Danke any way my friend!!

ahh Sh**!

I have stable CM7 installed. What I did just now is installed SndInitDefy_2.0.apk (http://forum.xda-developers.com/showthread.php?t=1032212)
Installed the stable .0.6 version of boot menu I think its called and rebooted in bootmenu and uninstalled the bootmenu. Now I'm stuck on the Google logo. Did I do something stupid? any fixes?
i did the same thing... stupid idea, don't know why but, it just got stucked
i have cm7 rom on the sd card, in case of something goes wrong
then i re-flash cm7 and try to install 2nd, it worked
i thing you need to unmark the usb debug and it will boot normaly >> (I think) <<
hmm I'm stuck with the Google logo when I power on, led light does nott flash either, is it bricked? If I press and hold the down vol key I get the caution sign.
Warfighter
i know it may have other ways to fix your defy
but try flash a stock sbf, i'm sure it will fix your problem
that caution sign is from the bootloader, you need to hold vol. up and down and it will enter on recovery
i recomend try to flash the stock sbf, since your defy enter in the stock bootloader it didn't have installed 2nd init
:/
looking at rds lite as we speak... did that I cant get in to recovery at all.
oops got it in system recovery now
hmm, you will flash the stock sbf?
you know, you can search in the forum, see if there is any thread that can help you, i just offer the easiest way
if you do, tell me if it worked or not
I have CMW backup of my cm7, can I apply it from this android system recovery? only option usefully in there is seems is the 'apply sdcard:update.zip'
MrNiick said:
hmm, you will flash the stock sbf?
you know, you can search in the forum, see if there is any thread that can help you, i just offer the easiest way
if you do, tell me if it worked or not
Click to expand...
Click to collapse
I'm not sure yet, I may have to, downloading one right now.
you would have to use "choose a zip from sdcard"
look for that option, but I think that you can't apply from the stock system recovery,
just by 2nd init :S
back on stock rom now, I need to root and restore my cm7 rom
thanks dude.

Rooting DEFY/DEFY+

JIUI v4(MIUI v4) & JWP7(Windows Phone 7 MOD): http://forum.xda-developers.com/showthread.php?p=26890050#post26890050
ROOTING Your DEFY/DEFY+
1.Download SuperOneClick from http://www.multiupload.nl/NQNSU63VXH
2.Turn On usb debugging mode in your phone.Don't put phone USB mass storage mode.
3.Connect your phone to your pc.
4.Open SuperOneClick as Administrator.
5.Click ROOT and wait. If it asks whether you wish to install Busybox etc, give yes or ok.
6.Once root is complete you will get a pop up asking whether you wish to donate. Make a choice.
7.At last you will find a line on the right side pane saying to reboot. Reboot your phone. Now your phone is rooted.
It won't get bricked, if it does get bricked(You will be stuck in MOTO logo or Andorid animation will stop abruptly and will start animation again(Nothing will work).Don't get scared
FLASHING WITH STOCK ROM
1.Download and install usb driver from here http://www.motorola.com/consumers/v/index.jsp?
vgnextoid=9691071a275b0210VgnVCM1000008406b00aRCRD
2.Download the sbf file from here
DEFY: http://sbf.droid-developers.org/umts_jordan/list.php (Based on your choice)
DEFY+: http://sbf.droid-developers.org/umts_jordanplus/list.php (Based on your choice)
3.Download RSD Lite from here http://www.multiupload.nl/8KGA2FPSMI
4.Remove your battery.
5.Press and hold power button and vol + button.
6.Put the battery back holding those buttons.
7.Now your phone will start and a blank screen will appear, now release those buttons. It will show the Bootloader.
8.Connect your phone via USB,now bootloader should display Transfer Mode:USB.(Drivers might install in your PC.If it install,wait till installation completes).
9.Open RSD Lite as administrator.
10.Hit show devies. Now your device must be displayed(If not drivers were not installed. Check for it.)
11.Now choose the sbf file.
12.Hit start. Be patient it will take some time.
13.Sometimes your phone reboots automatically and result column will say pass. If that doesn't happen,it will ask you to reboot manaully and your phone will be stuck in MOTO logo.
- Now remove your USB cable and remove battery. Hold power button and vol + button, you will get that screen.
- Now connect usb, now it result should say pass.
- Press the power button and start the phone. First boot will take some time (Min of 10 minutes or more).
If you are still stuck in bootloop
1.Remove your battery.
2.Hold the power button and vol - and put the battery.
3.You will enter into Motorola stock recovery.
4.Give factory rest and wipe cache.
5.Reboot your phone. This time it should work, else one again flash the sbf using RSD Lite.
ANY BROKEN LINKS!! PLEASE REPORT.
I've a red lensed defy. Any special thing to do about it?
Sent from a button.
pacificmg said:
I've a red lensed defy. Any special thing to do about it?
Sent from a button.
Click to expand...
Click to collapse
No. Use superoneclick it will work.
root
will it works on dfp 231 or bl7 ota roms with new 2.3.6
ftpankaj said:
will it works on dfp 231 or bl7 ota roms with new 2.3.6
Click to expand...
Click to collapse
No. You should use this http://forum.xda-developers.com/showthread.php?t=1595013
-help-
my defy got stuck on moto logo and I tried to get into stock recovery.
when i press - volume botton and power the phone shows me a triangle with android beneath it as if it had an error...
please help
natanhel said:
-help-
my defy got stuck on moto logo and I tried to get into stock recovery.
when i press - volume botton and power the phone shows me a triangle with android beneath it as if it had an error...
please help
Click to expand...
Click to collapse
That's normal. Press volume up + volume down on that screen to access the stock recovery. You'll probably need to wipe data/factory reset in that menu to fix the boot error.
it might occured because I don't have enough battery?
phone just died because the lack of it :\
I'll try that later when I'll have abit of precentage on my battery
thanks! that did the trick for me
Rooting Defy+ with DFP -231
Does this method of rooting work with my Defy+ having Android 2.3.6 with build DFP-231 with BL7 ??
Can anyone please confirm. Thanx in advance.
harsh_voldy said:
Does this method of rooting work with my Defy+ having Android 2.3.6 with build DFP-231 with BL7 ??
Can anyone please confirm. Thanx in advance.
Click to expand...
Click to collapse
See here
Cant root defy plus 2.3.5
i tried rooting my phone defy plus running 2.3.5 with super one click but the process gets stuck at step6 in rooting the device.HELP! pls
abi129ful said:
i tried rooting my phone defy plus running 2.3.5 with super one click but the process gets stuck at step6 in rooting the device.HELP! pls
Click to expand...
Click to collapse
Try rebooting your device and try again
thanks, superoneclick is still the easiest for me.
Hi I want to flash a kernal netfilter for my defy or rom with netfilter kernel any help?
Sent from my MB525 using xda app-developers app
amarayoub83 said:
Hi I want to flash a kernal netfilter for my defy or rom with netfilter kernel any help?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Perhaps you are forgetting that our phone have a locked bootloader.
No but when I update from eclir to froyo via motorola the kernel was netfilter but when I flash cm7 kernel I missed this feature
Sent from my MB525 using xda app-developers app
Actually, there is nothing called CM7 kernel or CM9 kernel. It's just stock kernel extracted from various SBF version that works best with CM7 or CM9. Nothing can be done afaik.
andr0idfreak said:
Actually, there is nothing called CM7 kernel or CM9 kernel. It's just stock kernel extracted from various SBF version that works best with CM7 or CM9. Nothing can be done afaik.
Click to expand...
Click to collapse
Ok thx
I can't tether via wifi even in android 2.3 rom .you have an idea? because it important to me, I make my resesrch in internet and I found that (the kernel must be netfilter)?
Sent from my MB525 using xda app-developers app
Which ROM are you on? Wifi tethering works fine on all 2.3 ROMs, unless mentioned in the changelog/bugs section.

Categories

Resources