Bricked Phone? - Defy General

My friend was trying to flash Pay's ROM, on his MD525 Deblur.
He rooted it correctly, he then made a backup using system recovery, then he flashed it to 3.4.2-164 Motorola SBF with RSD Lite in bootloader mode..
After that he Re-rooted it again with SuperOneClickRoot.
Then he installed 2ndInit recovery installer.
When he was trying to flash the ROM.zip.. It showed an error, because 2ndInit 1.6 doesnt support Pay's rom.
He then tried to restore using system recovery.. the restore was successful. but when he rebooted, it is stuck at the red motorola logo and aftter 30secs it reboots again. and the process continues... So is it bricked?
I think he can now install the Nordic 3.4.2-177 and use cyanogen mod on it..
That can unbrick his phone right?
PS: Sorry for my bad english!

Wipe data in stock recovery, and than reboot and flash SBF via RSD...

ifu said:
Wipe data in stock recovery, and than reboot and flash SBF via RSD...
Click to expand...
Click to collapse
How to wipe data in stock recovery?
Anyways.. he flashed the sbf and he is now installing cyanogen..
I heard that the battery drains fast with cyanogen rom is it true?
If it is.. then which ROM he should opt to?

In Beta 5.1 battery drain problem was there, but in Beta 6 peoples say its solved....And i m using MiUi.

RuDe.. said:
How to wipe data in stock recovery?
Click to expand...
Click to collapse
To get into stock recovery:
Turn off the phone
Press the down volume button together with the on button.
When the phone turns on, and you get a droid image, touch the bottom right corner of the screen. If nothing happens, press the up and down volume buttons together.
This will get you into stock recovery. It has wipe data menus.

ifu said:
In Beta 5.1 battery drain problem was there, but in Beta 6 peoples say its solved....And i m using MiUi.
Click to expand...
Click to collapse
Any noticeable differences between CM7 and MiUi?
Zach21 said:
To get into stock recovery:
Turn off the phone
Press the down volume button together with the on button.
When the phone turns on, and you get a droid image, touch the bottom right corner of the screen. If nothing happens, press the up and down volume buttons together.
This will get you into stock recovery. It has wipe data menus.
Click to expand...
Click to collapse
Thanks for the Reply.
His phone sbf version was 2.59 eclair.. he directly flashed it to 3.4.2-164.
He lost the downgrade ability right? Or else can he still downgrade?

After successfully installing cm7, he made a backup using system recovery..
Now again the phones is stuck at the red motorola logo.. its stuck frm around 30 mins..
he also tried removing battery and rebooting but non working..

-Download 2ndInt Recovery Installer from Market or from Xda
-start the app, click install, wait for the led to turn green, disable usb debugging in the settings and reboot 2 times.
download CyanogenMod7 and put it on sdcard
- wait for the blue Led and then press "Volume down"
- "[Open Recovery] start."
- wipe "data/factory reset"
- "install zip from sdcard" ->- "choose zip from sdcard"
- reboot
- wait for blue led "Volume down" and then choose boot "[2ND-INIT] boot"
- done

Double Post..

Thanks for the reply!
But pls read my post again.. After successfully installing cyanogen mod 7..
He thought to made a backup, and after successful backup using system recovery.. after the reboot the phone was stuck.
Now he flashed it again to 3.4.1-177 sbf.. it completed successfully, but still it is stuck at android logo now.. What should he do?

After installing CM7 did choose [2ND-INIT] boot...?

Now the prob is that he was flashing the sbf on low battery.. I told him to recharge before doing that.. he didnt listen.. now his battery is not charging..

Try wall Charger...

Still cant get it to work.. Scared of doing this method http://forum.xda-developers.com/showthread.php?t=892026
So any other methods?

RuDe.. said:
Still cant get it to work.. Scared of doing this method http://forum.xda-developers.com/showthread.php?t=892026
So any other methods?
Click to expand...
Click to collapse
No idea other than this...Sorry

The battery problem is fixed now..
But now it is stuck at the android logo..
What happened is I was trying to make a backup using system recovery on cm7..
The backup was successful.. but from then it is not booting up...
tried wiping data/cache and factery reset.. still doesnt work..
tried to flash again with 3.4.2-177 nordic rom.. it shows booting 100%.. and also shows to manually power up this phone.. Still it is stuck at android logo..

Got everything under control for now..
Thanks for the help guys..

Related

[Q] [motorola Defy] STUCK on M Logo [HELP!]

Ok so here is what happened:
I'm a very beginner to Android. And my Defy is rooted.
Then I found this: http://forum.xda-developers.com/showthread.php?t=977989&page=1
I thought it would be cool to have a gray statusbar.. So I went to recovery, and applied the "Barebones_13-signed.zip" renamed update.zip
It said installation successful (i think) then I rebooted my phone.
Now it's STUCK on the M logo!!!
I really don't know what to do :'(
Tried everything;
Remove battery and reboot.
Plugged phone and reboot.
Went to bootloader (I even don't know what's that )
PLEASE HELP ME :'(
ok try going to stock recovery and wipe the date and cache it will help in a normal boot loop or else
Try flashing a new sbf if the above method fails or pm me with ur gtalk id i ll help u out
pritesh_100_in said:
ok try going to stock recovery and wipe the date and cache it will help in a normal boot loop or else
Try flashing a new sbf if the above method fails or pm me with ur gtalk id i ll help u out
Click to expand...
Click to collapse
mm i can't go to recovery (it show me a white triangle with an exclamation mark)
But i can go to bootloader...
Any hints?
:'(
Going into Bootloader is enough
U should download the sbf below that article,then use RSD Lite to flash the sbf file into ur phone when ur phone is under bootloader mode
Did this and it worked
THANK YOU!!
Installed stock 2.2 but my phone becomes more laggy... maybe becuz I couldn't wipe data..
alfchin said:
Going into Bootloader is enough
U should download the sbf below that article,then use RSD Lite to flash the sbf file into ur phone when ur phone is under bootloader mode
Click to expand...
Click to collapse
Did this and it worked
THANK YOU!!
Installed stock 2.2 but my phone becomes more laggy... maybe becuz I couldn't wipe data..
try installing the custom rom again, and go into stock recovery. when you see the little triangle press vol + and vol - at the same time. youll get a menu(navigate with the volume keys). go to wipe data and press the screen lock key(the one at the top) reboot, then youre sorted.

Defy not working :(

Hello everyone,
first of all,I want to thank all those involved in this forums.
I'm here trying to have a solution for my defy..I bought it 1 week ago and I used it only the first day!!
My friend told me that I can upgrade android to 2.3,and I can get more apps with 2.3,so he tried to upgrade it but it didn't work.
once I turn on the device,Motorola Logo appear,then Galnet MIUI appear,and it loops unlimited times,it load for 4 seconds then loop again..
after..I told the person who made the video "how to upgrade to 2.3" about my problem..he recommended me to flash by RSD Lite and 3.4.3_11-Stock.UKTmobile_BLUR.sbf ,and then I did everything as he told me but it didn't work..this time I get White Motorola logo with Blur word and it loops unlimited time.
then I flashed again but this time I replaced the sbf file with "JRDNEM_U3_3.4.3-36-1.1.sbf",also it didn't work..this time I get Red Motorola Logo then ANDROID word.it seems to be loop.
I don't know whats wrong,can someone tell me how exactly to flash ?
Because when the program says Please Manually Power up this Phone..idk what to do,it's already on!!so I remove the battery then I power up.
help me please I was happy with 2.2,can I get my defy back to 2.2 just like when I bought it??
my english bad sorry
thanks a lot,
Boot into stock recovery and wipe data / cache. Then flash again any 2.2.2 sbf file. To update into stock gingerbread, your phone must have custom recovery to perform the nandroid restore follow with flashing fixed sbf.
Sent from my awesome Moto Defy: Stock Rooted Gingerbread 2.3.4 - XDA Premium
farsight73 said:
Boot into stock recovery and wipe data / cache. Then flash again any 2.2.2 sbf file. To update into stock gingerbread, your phone must have custom recovery to perform the nandroid restore follow with flashing fixed sbf.
Sent from my awesome Moto Defy: Stock Rooted Gingerbread 2.3.4 - XDA Premium
Click to expand...
Click to collapse
Thanks a lot for replying,
Please excuse me iam really noob
I used to boot into stock recovery by Pressing [Volume Down] when i see Blue Led Light,but it doesn't work any more,help plz.
UP T_T,Please help.
The blue led light is the 2nd-init sequence to enter into custom boot menu.
It definitely gone when you flash another full sbf. But then you have the stock recovery to perform the full wipe.
Booting into stock: Start up phone and press vol- until android logo and follow with pressing vol- and vol+. Now you should be in stock recovery. Do the full factory wipe here.
Next boot into bootloader: Start up phone and press vol+ until you see bootloader screen. Don't worry anything stating in this screen.
Next flash your phone to froyo 2.2.2 sbf. If it still failed. You need to use another Rsdlite version or flash with another PC. It happen alot of peoples having flashing issue which is cause by incompatible PC.(Dont ask me why).
Make sure battery is in good state before flashing.
THanks a lot,I used differant farmware and it works!
thanks farsight73,
defy not working
Hi,
I instaled cm9 on my defy. Now when I try to turn it on, can't. Also cant open recovery, cause there is error: "busybox was not created in footfs". And when I open recoveri, it says: "E:Error in /system/bootmenu/script/recovery.sh (result: no such file or directory) Could someone please help me?
mateja22 said:
Hi,
I instaled cm9 on my defy. Now when I try to turn it on, can't. Also cant open recovery, cause there is error: "busybox was not created in footfs". And when I open recoveri, it says: "E:Error in /system/bootmenu/script/recovery.sh (result: no such file or directory) Could someone please help me?
Click to expand...
Click to collapse
Please, read the thread, farsight73 posted the solution
LeonardoJegigzem said:
Please, read the thread, farsight73 posted the solution
Click to expand...
Click to collapse
Didn't work for me :/ I still have the blue light... but I can't go in stock recovery... after that there is exclamation mark and nothing happens...
mateja22 said:
Didn't work for me :/ I still have the blue light... but I can't go in stock recovery... after that there is exclamation mark and nothing happens...
Click to expand...
Click to collapse
Can you access 2ndinit or Stock recovery by pressing both the volume key when blue light flashes??
I'm sure you can access Boot loader. If recovery not working then you may flash your phone with Froyo SBF using RSD lite.
Refer to below mentioned article for more info on this:
http://forum.xda-developers.com/showthread.php?t=1216982
Hope this helps!!
Rajneeshgadge17 said:
Can you access 2ndinit or Stock recovery by pressing both the volume key when blue light flashes??
I'm sure you can access Boot loader. If recovery not working then you may flash your phone with Froyo SBF using RSD lite.
Refer to below mentioned article for more info on this:
http://forum.xda-developers.com/showthread.php?t=1216982
Hope this helps!!
Click to expand...
Click to collapse
I resolved it... thanks!
mateja22 said:
I resolved it... thanks!
Click to expand...
Click to collapse
Congrats!!

Famous "stuck" in boot.. :(

First I had 2.2 CEE full SBF. Then I had flashed various FIXED sbfs 2.3.4.. now I wanted to go to back to cyanogen since it is stable and I flashed full sbf from 2.2 CEE again wizh RSD litte but stucked on famous "android" bootloop on screen. What to try now? How to get out of this and have CM7 again? How to get my phone working plz help
ezantera said:
First I had 2.2 CEE full SBF. Then I had flashed various FIXED sbfs 2.3.4.. now I wanted to go to back to cyanogen since it is stable and I flashed full sbf from 2.2 CEE again wizh RSD litte but stucked on famous "android" bootloop on screen. What to try now? How to get out of this and have CM7 again? How to get my phone working plz help
Click to expand...
Click to collapse
go to recovery and wipe cache
marko1103 said:
go to recovery and wipe cache
Click to expand...
Click to collapse
I cannnot get to recovery, I can only get into bootloader to flash sbf.
edit: How to enter standard recovery? Hold down volume down on blue led?
Ok, just hold the volume- button, the button which allows you to lower volume level, and AFTER that, press the power button. Then u should see the stock recovery where u can wipe data and cache. Just wipe everything possible, than u should be able to boot ur stock rom.
Sent from my MB525 using XDA App
nitrous² said:
Ok, just hold the volume- button, the button which allows you to lower volume level, and AFTER that, press the power button. Then u should see the stock recovery where u can wipe data and cache. Just wipe everything possible, than u should be able to boot ur stock rom.
Sent from my MB525 using XDA App
Click to expand...
Click to collapse
OMG, battery is dead. Huh, I guess that one is true that one evil not come alone..... I will have to go McGyver... God please help, I have whole 1 year to go on contract with this phone
ezantera said:
I cannnot get to recovery, I can only get into bootloader to flash sbf.
edit: How to enter standard recovery? Hold down volume down on blue led?
Click to expand...
Click to collapse
Ok, the fact that you can see a blue led means that you actually HAVE 2nd recovery and cwm installed. As soon as you can see the blue led, just press the volume - button. Now ur on bootmenu, choose " RECOVERY" than "custom recovery" and now you should be on clockworkmod recovery. Here you can easily wipe anything you want. But its still weird that you can see the blue led after flashing a full stock sbf by RSd lite. Coz after such a process the custom recovery and bootmenu should be deleted. I guess you haven't flashed correctly. Plz do it again, and don't ask for a How-to!...no, no, I'm not House M.D. ...
Sent from my MB525 using XDA App
I dont know what happened exactly, probably phone reset itself during flashing and that is why I had strange problems.
During charging using "Mcguier" method I bend one pin on battery so tel was resetting itself because of that. Small wrong movement and bam...
Thanks evrebody for reply...
Reflash again using the RSD lite then try to apply the custom rom again

HELP please!my defy is stucked with no rom!!

friends and i mean its stucked deep!
i was running cm7 full63 nightly and some app my brother download stuck the phone.i take it in my hands flash it again with wipes and wasent working good.then i go to the cwm again.i do 4 wipes(factory-cache-davlik-battery)and go to mounds and storage and do format chace-data-system!and that was for defy the death!
it downgrade my cwm from 5.something and i have <3e> and it cant find my rom on apply sdcard;update.zip to flash it,it says ,can't mound cache;recovery/log,it cant do nothink with this cwm!!
please help if you want!thank you!!
use rsd lite to flash a stock froyo rom... start from scratch....
Sent from my MB526 using xda premium
what is rsd is this rar http://forum.xda-developers.com/showthread.php?t=1348587?and how i do it?
ok i have download this rom http://www.mediafire.com/?op47dv8yo8iypj1 and the rsd litev5.6
what steps i must do to flash the rom?
alexanter the great said:
ok i have download this rom http://www.mediafire.com/?op47dv8yo8iypj1 and the rsd litev5.6
what steps i must do to flash the rom?
Click to expand...
Click to collapse
Install RSDLite on your PC. Use WinRAR or 7zip to decompress the. gz file you downloaded (there is an sbf file inside - the clean Froyo firmware you want to flash - and save it somewhere.
Take your Defy and press the power and volume up button and release after some seconds so that you enter the bootloader mode (you see some white text on black ground).
Connect the phone via USB with your PC with RSDLite running.
In RSDLite click the button with the three dots and open the sbf file you extracted.
Hit the start button. Now it starts flashing the firmware, takes a couple of minutes.
When it's done the phone reboots and is running a Motorola Froyo firmware (not rooted or something, it can't really be called a ROM). If you want you can root, install CWM again etc and put your ROM in it again.
Almost always when your Defy is doesn't boot anymore or is somehow broken softwarewise, you can use this method to repair it.
thank you for your time.
i have done this steps,i flash this rom with rsd,root it with superoneclick,but i cant install cwm recovery with rom manager so i cant flash cyannogen again.i have found a apk (flipout system recovery)it goes me to recovery but it not working good
how i install the correct cwm recovery for intalling any roms i want?
alexanter the great said:
thank you for your time.
i have done this steps,i flash this rom with rsd,root it with superoneclick,but i cant install cwm recovery with rom manager so i cant flash cyannogen again.i have found a apk (flipout system recovery)it goes me to recovery but it not working good
how i install the correct cwm recovery for intalling any roms i want?
Click to expand...
Click to collapse
If you want the recovery menu you need to install 2ndinit. http://goo.gl/5P89P
Open the app and install the recovery menu with it, then reboot (some say it is safer to reboot even two times). You get the blue LED after powering the phone on, you have to press volume down then. There you can get to the custom recovery and wipe data, cache, install zips from SD etc.
Arjoma said:
If you want the recovery menu you need to install 2ndinit. http://goo.gl/5P89P
Open the app and install the recovery menu with it, then reboot (some say it is safer to reboot even two times). You get the blue LED after powering the phone on, you have to press volume down then. There you can get to the custom recovery and wipe data, cache, install zips from SD etc.
Click to expand...
Click to collapse
yes it worked!
thank you very much my friend you where very helpfull!danken!!
alexanter the great said:
yes it worked!
thank you very much my friend you where very helpfull!danken!!
Click to expand...
Click to collapse
danken?
Arjoma said:
danken?
Click to expand...
Click to collapse
i dont now!thanks in german!
alexanter the great said:
i dont now!thanks in german!
Click to expand...
Click to collapse
Ah, I almost thought that you meant that It should rather be "Danke"
Ορίστε, κανένα πρόβλημα! ("You're welcome, no problem" in Greek?)
its:παρακαλω κανενα προβλημα!!
i translate it for be sure and it wrote me danken, and made me curious,but i was know it is danke!Danke any way my friend!!

Is my MB526 bricked?

Was running CM10-20120804-NIGHTLY-mb526 successfully, but having some performance issues, by following this process:
1) Go to Stable Recovery.
2) Wipe data/factory reset, wipe cache and go to advanced ► Wipe dalvik.
3) Go to Install zip from sdcard ► Choose zip from sd card.
4) Flash gb Kernel (JUST FOR DEFY RED LENS USERS).
5) Flash CM10-2012xxxx-NIGHTLY-mb526.zip.
6) Flash Gapps and Battery fix for red lens.
7) Wipe Cache and Dalvik again (recommended).
8) Restart.
(http://forum.xda-developers.com/showthread.php?t=1795647)
I only thing I hadn't done was flash the gb Kernel, so I thought I'd try that to ensure I followed the full process. I received advice to reinstall this kernel-froyo-222-179-4-signed.zip.
However, after following to above steps, this time with the mentioned kernel, I get this error:
Bootloader
09.10
Err:A5,70,00,23
Battery OK
OK to Program
Connect USB
Data Cable
Now I'm panicking!! When I turn on the phone, it doesn't even get to the second Motorola logo screen where you can enter recovery mode. Was this an incorrect kernel? Any idea how to fix this? BTW, I'm now at work and have no USB cable.
Really worried I've bricked it by installing the incorrect kernel...
EDIT: I've also tried entering recovery from Vol- and Power, but to no avail
I'm hoping that maybe RSD Lite can fix this, but not sure what kernel to flash. I think originally I might have flashed this kernel kernel-froyo-222-179-4-signed after using SuperOneClick, but can't be sure.
Any help would be very much appreciated!
Try by reinstalling stock firmware using oem tool/software.
Sent from my MK16i using xda app-developers app
chiragvagh said:
Try by reinstalling stock firmware using oem tool/software.
Sent from my MK16i using xda app-developers app
Click to expand...
Click to collapse
Do you have a link for these please?
Defy+ users need not flash any kernel to get cm9 or cm10 working. Flashing the kernel will cause this error.
super noob bros said:
Defy+ users need not flash any kernel to get cm9 or cm10 working. Flashing the kernel will cause this error.
Click to expand...
Click to collapse
Any idea how to fix it?
Flash your stock SBF back. You can find your stock ROM SBFs here:
http://sbf.droid-developers.org/umts_jordanplus/list.php
super noob bros said:
Defy+ users need not flash any kernel to get cm9 or cm10 working. Flashing the kernel will cause this error.
Click to expand...
Click to collapse
andr0idfreak said:
Flash your stock SBF back. You can find your stock ROM SBFs here:
http://sbf.droid-developers.org/umts_jordanplus/list.php
Click to expand...
Click to collapse
I see no stock Telstra Australia SBF there. I was also of the belief that I couldn't go back to stock with a Defy+.
I can see some SBF for AU. Try flashing that. I cannot guarantee anything though.
http://sbf.droid-developers.org/umt...AJRDNGIBRANZ_P020_A026_HWp3_Service1FF.sbf.gz
http://sbf.droid-developers.org/umt...3C_USAJRDNGIBRANZ_P021_A030_Service1FF.sbf.gz
Try the 1321 version first as it is BL6 and easily rootable. If that too gives bootloader error then probably you are on BL7 and the second one is the only way out.
andr0idfreak said:
I can see some SBF for AU. Try flashing that. I cannot guarantee anything though.
http://sbf.droid-developers.org/umt...AJRDNGIBRANZ_P020_A026_HWp3_Service1FF.sbf.gz
http://sbf.droid-developers.org/umt...3C_USAJRDNGIBRANZ_P021_A030_Service1FF.sbf.gz
Try the 1321 version first as it is BL6 and easily rootable. If that too gives bootloader error then probably you are on BL7 and the second one is the only way out.
Click to expand...
Click to collapse
Tried downloading those a few times, but they seem to be corrupt.
Any other SBFs worth trying other than JORDN_U3_97.21.51.sbf which doesn't seem to work? Everything seems fine when using it in RSD, and it says it's passed, but then the phone simply won't power up. Any ideas?
If it doesn't power up after flashing SBF, try this:
1. Remove battery.
2. Keep the vol - pressed and then insert battery.
3. Then press the power button, keeping the vol- pressed.
4. You should see a triangle logo with exclamation mark, that's the stock recovery.
5. Press vol+ and Vol- key together to get various options.
6. Try wiping data and cache/factory reset.
andr0idfreak said:
If it doesn't power up after flashing SBF, try this:
1. Remove battery.
2. Keep the vol - pressed and then insert battery.
3. Then press the power button, keeping the vol- pressed.
4. You should see a triangle logo with exclamation mark, that's the stock recovery.
5. Press vol+ and Vol- key together to get various options.
6. Try wiping data and cache/factory reset.
Click to expand...
Click to collapse
No good - phone won't turn on at all, nothing but black screen
Ok. Try the same procedure but with vol+ instead till step 3, to get onto bootloader mode. Then try flashing the SBF again.
Finally back up and running
Flashed this ROM http://sbf.droid-developers.org/umt...3C_USAJRDNGIBRANZ_P021_A030_Service1FF.sbf.gz and it worked!
Thanks for all your help people

Categories

Resources