I soft bricked my SGS2,bought the jig set it in download mode everything reset. But when I re booted same screen came up nothing. I can't even connect to Odin.
Related
like the title my phone has no signal wont do wifi charges but is not recognized by computer download mode wont recognize jig put into factory mode wont recognize what do i need to do?
After clearing cache and everything for an install of my rom if kept failing. With issue 7. Someone with the same problem did freezas bootloader modem flash or something with the same phone. I done loaded the correct install and I restarted my phone. Nothing happened. My phone won't turn on. I've have literally tried everything except usb jig and jtag. before I made a jig I just wanted to see if anyone out there could tell me for sure if this is a jig fix or a jtag fix. Phone won't turn on. Did the factory download mode buttons and nothing. Did the cwm mode buttons and nothing. Held the power button and nothing. Held power and volume up and the power volum down still nothing. Plugged into computer and wall socket, nothing. Take battery out hold power button and plug usb from computer into phone, red charge light connects and then disconnects. I was thinking it may be a soft brick since I do get some sort of response out of it. If it was hard bricked it would do absolutely nothing, or am I wrong?
Also, once I get the red charge light on I have tried using adb to try to reboot boot loader,etc (everything). Doesn't find any devices cuz once plugged in it connects and disconnects. Except for when I plug it in and hold the power button. Only then will it make the connect sound and not the disconnect, but nothing is ever found on computer or with adb when searching. Always no device listed.
Go here to page 17 and read through page 20, it will likely help you unbrick, I had a hard brick lastnight and recovered it myself using this method.
http://forum.xda-developers.com/showthread.php?t=2321310&page=17
If you have anything useful to add please put it in this thread http://forum.xda-developers.com/showthread.php?t=2549068
I added links for where to get known working things you need for AT&T 4.3 in the link ^^^ up there.
If you have the I747M I suggest you get the Odin tar from www.sammobile.com
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
X3oNx0x00 said:
After clearing cache and everything for an install of my rom if kept failing. With issue 7. Someone with the same problem did freezas bootloader modem flash or something with the same phone. I done loaded the correct install and I restarted my phone. Nothing happened. My phone won't turn on. I've have literally tried everything except usb jig and jtag. before I made a jig I just wanted to see if anyone out there could tell me for sure if this is a jig fix or a jtag fix. Phone won't turn on. Did the factory download mode buttons and nothing. Did the cwm mode buttons and nothing. Held the power button and nothing. Held power and volume up and the power volum down still nothing. Plugged into computer and wall socket, nothing. Take battery out hold power button and plug usb from computer into phone, red charge light connects and then disconnects. I was thinking it may be a soft brick since I do get some sort of response out of it. If it was hard bricked it would do absolutely nothing, or am I wrong?
Also, once I get the red charge light on I have tried using adb to try to reboot boot loader,etc (everything). Doesn't find any devices cuz once plugged in it connects and disconnects. Except for when I plug it in and hold the power button. Only then will it make the connect sound and not the disconnect, but nothing is ever found on computer or with adb when searching. Always no device listed.
Click to expand...
Click to collapse
Please refer to this post for answers: http://forum.xda-developers.com/showthread.php?p=48242884#post48242884
My phone won't turn off in charge mode. I setting the option off, but always restarts. Not recognize MTP and other USB options. Only charge mode.
I've tried different cables and drivers but not solved. I have restored factory data and installed new rom again with kdz update and nothing.
Thanks in advance.
I recently installed cm12 on my phone after a long time thinking it was bricked. However, I want to switch to stock firmware now, but I can't make my pc to recognize the phone, and I can't enter download mode, so that means I can't flash it back using LG flashtool. I've installed LG drivers several times, tried 2.0 and 3.0 usb ports, native and others usb cables, but nothing seems to work. As for download mode, I press the up button while the phone is off, and when I connect the usb, it shows the battery image, and it stays there.
Any thoughts?
I rooted my Galaxy a70 using vbmeta,Twrp and magisk. All was going well. Suddenly my phone turned off and when I press power button its shows download mode .so I tried odin to flash but every time it fails.After many tries I realise that its port are not connecting to pc ,its only charging and my pc also can't detect my phone ..now when I connect the phone to pc its shows samsung logo.its also not showing the battery percentage .
(My pc is ok it have all driver installed and odin works)
Is there anyway to solve.
Thanks.
reboot pc just to be sure.
connect phone and pc
on the phone in download mode screen, hold vol down and power till screen goes blank immediately let go and hold vol up and down to boot back into download mode. the letting go when screen goes blank to holding up and down needs to be fast.
now once back in download mode, is odin showing port number?
also make sure your using odin 3.13.3
if still no go, try uninstalling samsung usb drivers, reboot then reinstall and try the process again.
When I put cable in my phone it directly shows the logo....
Its not showing the battery
I tested my another Samsung phone to be sure that my softwares are working. And it's working but when I put my A70 in. Nothing happened