like the title my phone has no signal wont do wifi charges but is not recognized by computer download mode wont recognize jig put into factory mode wont recognize what do i need to do?
Related
I soft bricked my SGS2,bought the jig set it in download mode everything reset. But when I re booted same screen came up nothing. I can't even connect to Odin.
My phone won't turn off in charge mode. I setting the option off, but always restarts. Not recognize MTP and other USB options. Only charge mode.
I've tried different cables and drivers but not solved. I have restored factory data and installed new rom again with kdz update and nothing.
Thanks in advance.
I recently installed cm12 on my phone after a long time thinking it was bricked. However, I want to switch to stock firmware now, but I can't make my pc to recognize the phone, and I can't enter download mode, so that means I can't flash it back using LG flashtool. I've installed LG drivers several times, tried 2.0 and 3.0 usb ports, native and others usb cables, but nothing seems to work. As for download mode, I press the up button while the phone is off, and when I connect the usb, it shows the battery image, and it stays there.
Any thoughts?
Hi, hope someone can help me!
I accidentally got my Samsung Galaxy J2 Prime SM-G32M stuck in a boot loop, it happened after i tried to put a micro-sd card in it, after i removed the micro-sd it stayed on boot loop and couldn't boot into recovery (in Enigma NL for J2 Prime there is a bug where you need to enter TWRP and reboot into system for it to turn on properly because when you turn it off the Kernel dies)
It seemed like it couldn't boot into download mode as well but i eventually got it to enter download mode, my computer does not recognize the device, i am not sure but i assume usb debugging is not enabled due to that, it doesn't have root and it uses Enigma NL Custom ROM: https://forum.xda-developers.com/t/rom-6-01-stable-g532xx-enigmanl-port-rom-for-j2-prime.3951387/ and this TWRP port: https://forum.xda-developers.com/t/...axy-j2-grand-prime-plus-sm-g532f-g-m.3616589/
The home button is a little bad and doesn't work from time to time but i don't think it is the reason of it not being able to enter TWRP. The only thing i've got is download mode, no recovery and probable no usb debugging as well, i really need the data inside but i haven't found a way of rescuing it that doesn't require USB debugging or entering recovery mode . Is there a way that i can either access recovery mode or rescue the data inside the phone without it?
I really need the data inside the phone and programs like Samsung Switch said they couldn't connect to the phone properly, plsss help
(I also tried ADB to enter recovery mode using the command line but ADB does not recognize my device even when it is turned on(on boot loop) and also when it is on download mode.)
My computer does not recognize the device.
Click to expand...
Click to collapse
Did you install Samsung drivers correctly on your PC? If not then this would explain why your PC failed to recognize your device.
I suggest you install those drivers right away, and test to see if it works.
I rooted my Galaxy a70 using vbmeta,Twrp and magisk. All was going well. Suddenly my phone turned off and when I press power button its shows download mode .so I tried odin to flash but every time it fails.After many tries I realise that its port are not connecting to pc ,its only charging and my pc also can't detect my phone ..now when I connect the phone to pc its shows samsung logo.its also not showing the battery percentage .
(My pc is ok it have all driver installed and odin works)
Is there anyway to solve.
Thanks.
reboot pc just to be sure.
connect phone and pc
on the phone in download mode screen, hold vol down and power till screen goes blank immediately let go and hold vol up and down to boot back into download mode. the letting go when screen goes blank to holding up and down needs to be fast.
now once back in download mode, is odin showing port number?
also make sure your using odin 3.13.3
if still no go, try uninstalling samsung usb drivers, reboot then reinstall and try the process again.
When I put cable in my phone it directly shows the logo....
Its not showing the battery
I tested my another Samsung phone to be sure that my softwares are working. And it's working but when I put my A70 in. Nothing happened