So steps to GB ROM:
1. Root the device - *done*
via z4root as superoneclick doesn't work.
How to root
Where to get z4root
Please note the temporary root on z4 doesn't appear to work but the perm root does work (this per the got root?) application.
2. Make a ROM back up - *done*
Progress Notes:
Clockworkmod *DOES* support p1010 development thread / info link
Please consider making a donation to Skin1980 for his hard work in porting CWM to this device.
He is still working on EXT4 support for our device to increase the speed so donations will help you help him
*** EDIT *** Please read the development thread in step 2 for a Ginger Bread ROM for the p1010 - yes it is European ROM but reports indicate it is working in multiple US devices.
3. Confirm the backup/restore procedure works and post the stock rom in progress
4. Determine / address boot loader situation *Appears to be unsigned*
5. Edit Samsung GB ROM (Euro or otherwise) to have root and/or customizations.
colemab said:
4. Determine / address boot loader situation
Click to expand...
Click to collapse
This one will prove the trickiest I guess, since there are no official GB roms. It would be great though, this would open up the door too to Honeycomb or even ICS!!
The good news is that as far as I can tell bootloaders are unsigned!
if you build Rom, thank all of you bro
Let's try to do gingerbread? I can be the tester, i have all stock firmwares and stock kernel. And i know some things about it.
Awesome! Will be watching this thread with anticipation!
I have both the p1000 (mine) and p1010 (wifes).
Mine is rooted and custom rom but have been eagerly awaiting root and roms for the p1010.
Stock Gingerbread Rom available for p1010
Just in case you haven't seen, today the above rom was put on sammobile.com, and skin1980 has a cf-root for it, I have it installed and its a bit of an improvement, Enjoy and ill be following your progress, be it custom ginger or hc,
GLHF
overcome rom porting to p1010
I am just thanking, can we port overcome rom to p1010.
Is there someone can flash custom rom via cwm? I have tried many times, it 's not work. If anyone can do it, please share your ideas!
collide said:
Just in case you haven't seen, today the above rom was put on sammobile.com, and skin1980 has a cf-root for it, I have it installed and its a bit of an improvement, Enjoy and ill be following your progress, be it custom ginger or hc,
GLHF
Click to expand...
Click to collapse
I still want ICS!
samcortez said:
I still want ICS!
Click to expand...
Click to collapse
You and me both man, lol samsung should have it out for us by early 2022, or maybe christmas 2021, and for anyone who has the p1010 gingerbread, z4root superoneclick or zergrush doesnt work,
samcortez said:
I still want ICS!
Click to expand...
Click to collapse
http://www.xda-developers.com/android/samsung-announces-ice-cream-sandwich-for-galaxy-devices/
Dont hold your breath.....
collide said:
http://www.xda-developers.com/android/samsung-announces-ice-cream-sandwich-for-galaxy-devices/
Dont hold your breath.....
Click to expand...
Click to collapse
Our galaxy 7" is not listed there.....
Sigh....
Sent from my GT-P1010 using xda premium
Due to a gingerbread update being released and me getting an ipad2 over the holidays, I have personally stopped work on this project. However, if you read the other threads you can see team mad is working on getting CM7 and possibly higher working on the p1010. Given the common hardware and existing GB update this is a realistic goal.
Goodbye and good luck from the dark side (IOS).
Related
Hey all,
Here's a custom ROM based on XWJV1 with a focus on speed and stability. Nothing too special; it's just a stock, unthemed, deodexed, optimized Gingerbread BETA ROM with some minor modifications.
PLEASE NOTE: This is a BETA ROM running on a BETA KERNEL, so I don't recommend installing this ROM if you're afraid of breaking your device / don't know how to use ADB / get upset when your phone crashes. This ROM is smooth, sleek, and looks damn good too, however, again, this is a BETA ROM, so there are going to be bugs on any ROM based on JV1. Don't complain.
Features:
Voodoo Gingerbread Beta Kernel
Based on Stock Gingerbread Beta XWJV1
Fully deodexed and zipaligned
Fixed build.prop, permissions for launch_GPS, as well as many other minor file tweaks
Removed Samsung Bloatware
Removed Startup + Shutdown sounds
Fully updated Google Apps + Swype
Gingerbread screen-off animation (Very cool. )
Removed Apps:
-Allshare, Press Reader, Aldiko eBook, Buddies Now, Layar, Mini Diary, Write and Go
Added apps:
-Launcher Pro, Gingerbread Launcher, Gingerbread Keyboard
Download: http://www.multiupload.com/YFJTDTFVD0
Installation Instructions:
Flash from CWM after disabling all lagfixes. If you don't know how to install a ROM you shouldn't be using this one.
Have you got the new tweak by nickadeamus or whatever his name is?
Hi.
Just downloading will give a try.
Sent from my GT-I9000 using XDA App
any screenshots please?
Just for the record, I bricked my i9000 GT. The bootloader gets messed up and I am now downloading a complete ROM to flash from heimdall.
claudiomkd said:
Just for the record, I bricked my i9000 GT. The bootloader gets messed up and I am now downloading a complete ROM to flash from heimdall.
Click to expand...
Click to collapse
Don't scare everyone man, your bootloaders are fine, your /system got corrupted resulting in a bootloop.
Corrupted bootloaders would mean either complete brick, or no 3BR
hi seearms just downloaded rom and installed jl2 modem everything fine so far, but time will tell. i was on ultibread when i came to yours so it was an easy transfer
Switched from a fresh stock 2.2, strangely i got the glitched screen when trying to enter recovery. Any suggestions? I see advice to flash boot.bin but I've not flashed JV1 prior to this so it can't be a bootloader problem.
Thanks.
Just wondering can this be installed from cwm if your current rom is froyo?
Ready to Test Drive
Really Eager to Try this ROM
Downloading now...
dlzp said:
Just wondering can this be installed from cwm if your current rom is froyo?
Click to expand...
Click to collapse
see the post above yours. Will not give you best possible install.
Probably better to flash from fresh jv1.
nice one !! i like ginger launcer, and just get rid of that launcher pro, ..
MadWhips said:
see the post above yours. Will not give you best possible install.
Probably better to flash from fresh jv1.
Click to expand...
Click to collapse
how to install a fresh jv1 are you talking about the one that flash through odin? which one should be used
Mothatt said:
Don't scare everyone man, your bootloaders are fine, your /system got corrupted resulting in a bootloop.
Corrupted bootloaders would mean either complete brick, or no 3BR
Click to expand...
Click to collapse
I see, then I apologize, I thought it was the bootloader.
Thanks for telling quick.
dlzp said:
how to install a fresh jv1 are you talking about the one that flash through odin? which one should be used
Click to expand...
Click to collapse
To install ultibread I flashed jv1 via odin, then unchecked auto reboot and flashed a hardcore kernel pulled the battery, rebooted into CWM and flashed ultibread as a zip from the sdcard . Should be the same procedure here, good luck!
I've been running your rom since yesterday and so far it's great with the JL2 modem. Highly recommended thus far...stable and fast like u said and even faster after enabling lagfix
jaju123 said:
Have you got the new tweak by nickadeamus or whatever his name is?
Click to expand...
Click to collapse
Not yet, it'll be included in the next release.
wobbu said:
Switched from a fresh stock 2.2, strangely i got the glitched screen when trying to enter recovery. Any suggestions? I see advice to flash boot.bin but I've not flashed JV1 prior to this so it can't be a bootloader problem.
Thanks.
Click to expand...
Click to collapse
Flash JV1 via Odin first, I believe it's the secondary boot loader in non-JV1 ROMs which causes screen tearing in recovery.
trinikartel said:
I've been running your rom since yesterday and so far it's great with the JL2 modem. Highly recommended thus far...stable and fast like u said and even faster after enabling lagfix
Click to expand...
Click to collapse
Thanks!
Good job seeARMS! I am going to wait a bit for and update before I jump in to this one as my i9000m is running so bloody fast on Darky's Extreme v9.3 that I don't want to mess with it. hahaha
I am going to try it though. I support you and your roms.
Fugu tweak by nickadeamus is gingerbread mod for froyo only. Not for gingerbread rom
Sent from my GT-I9000 using XDA App
wingg said:
Fugu tweak by nickadeamus is gingerbread mod for froyo only. Not for gingerbread rom
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Technically Nikadeamus said that it "may" work on GB but hasn't tested it.
EDIT: Some users with JV1 claimed to have noticed only a slight improvement if any at all. However, it may just be plain old placebo at work.
It's finally here...
Samsung's official Middle East Gingerbread ROM 2.3.3 with full Arabic support for the Galaxy Tab.
Code: P1000 - JPJP9
This rom image is specifically intended for developers to tinker around with and not for regular users. This rom image is untouched and does not contain any of the enhancements/additions seen in custom roms.
This rom image has been extracted from a recently updated Galaxy Tab via Kies. Kies pushed the JPJP9 update, and the rom image was simply dumped.
This is not a Beta... It is an actual final release of the official Arabic Samsung rom for the Galaxy Tab.
USE AT YOUR OWN RISK !!!
http://www.MegaShare.com/3370075
As always use Odin v1.7 to install.
Enjoy, and hope to see great cooked roms out of this one
tansoftware said:
It's finally here...
Samsung's official Middle East Gingerbread ROM 2.3.3 with full Arabic support for the Galaxy Tab.
Code: P1000 - JPJP9
This rom image is specifically intended for developers to tinker around with and not for regular users. This rom image is untouched and does not contain any of the enhancements/additions seen in custom roms.
USE AT YOUR OWN RISK !!!
http://www.MegaShare.com/3370075
As always use Odin v1.7 to install.
Enjoy, and hope to see great cooked roms out of this one
Click to expand...
Click to collapse
thanks mate....but what do u mean its official release but intended developers and not for regular users ?? do u mean this is an official beta release !! then it should be called beta not official release i guess
have u tried it ?? is it stable ?? a little more info will be highly appreciated
For our Arabic speaking friends here, please explain the message here in english
http://www.ce4arab.com/vb7/showpost.php?p=2566836&postcount=251
bongski55 said:
For our Arabic speaking friends here, please explain the message here in english
http://www.ce4arab.com/vb7/showpost.php?p=2566836&postcount=251
Click to expand...
Click to collapse
the message says, "Screens from the new rom after installing honeycomb lock screen"
wakady said:
the message says, "Screens from the new rom after installing honeycomb lock screen"
Click to expand...
Click to collapse
this rom has launcher 4 ? ?? what the buck ? ? ? ? how huh!
wakady said:
the message says, "Screens from the new rom after installing honeycomb lock screen"
Click to expand...
Click to collapse
I tried google translate but the translation did not make sense to me....
How about the previous and succeeding posts to this? Why did he posts this pictures? It must be a response to previous post....
bongski55 said:
I tried google translate but the translation did not make sense to me....
How about the previous and succeeding posts to this? Why did he posts this pictures? It must be a response to previous post....
Click to expand...
Click to collapse
The link provided by @wakady demonstrates the new rom while in action. The honeycomb skin/theme shown is a seperately installed MOD and does not come with the official rom.
Hope this clarifies...
wakady said:
thanks mate....but what do u mean its official release but intended developers and not for regular users ?? do u mean this is an official beta release !! then it should be called beta not official release i guess
have u tried it ?? is it stable ?? a little more info will be highly appreciated
Click to expand...
Click to collapse
Please look at my revised initial post.
Regards,
@tansoftware thx mate
I am on AT&T 2.2 does it upgrade directly to 2.3.3?
freeman9911 said:
I am on AT&T 2.2 does it upgrade directly to 2.3.3?
Click to expand...
Click to collapse
Theoretically it should work... But I'm not responsible for any unexpected results from the upgrade...
If your tab is an International/Middle East version, then it should work fine...
Actually it won't as this firmware is missing the bootloaders. Flash a stock gingerbread firmware first then this one.
Hello Experts!
Just a question of caution before i upgrade my Tab.
I have a stock Galaxy Tab so its not rooted or anything.
Do i just download Odin 1.7 and the Arabic Rom and flash my Tab?
Any advice before i begin?
Thanks
If you're on Froyo ROM Flash Chainfire's ROM first as it contains bootloaders. If you are already on gingerbread then flash away
I'm still on Froyo 2.2.
Does this ROM allow arabic to be displayed properly, meaning that the letters are connected?
I hate to sell my Tab just to get the Ipad for its native ability to read arabic.
and what are bootloaders good for? can i upgrade to this arabic ROM without installing Chainfire's ROM first?
Gingerbread has its own signed bootloaders for it to boot. This firmware here doesn't contain them. If you flash it it will not boot and you only get screen corruption.
A safe alternative is that you can do it at your local samsung service center.
Is this the rooted one available at ce4arab.com forum?
or is it completely original kernel with original Samsung recovery menus?
ok thanks for the advice.
any chance u've tried the rom out? could you tell me if the arabic letters are connected properly?
thanks
kweiss10 said:
ok thanks for the advice.
any chance u've tried the rom out? could you tell me if the arabic letters are connected properly?
thanks
Click to expand...
Click to collapse
yes they r mate...i've tried it....similar like froyo with same apps pre-installed as well
if u need any assistance let me know
can you please upload another link to the firmware as this one seems to be not working and if you have any idea about how to install arabic to 2.3.3 insted of flashing the whole firmware that would be great.
I don't have this phone. My friend owns one. He's asking me to update his device to Android 4.0 unofficially.
I have some questions :-
1) Which is the best method to root this via stock?
2) Which is the most stable ICS ROM? Any major/minor bugs?
3) Please link me to a thread that gives instructions on how to install recovery and other procedure for installing ROMs on this device.
4) Is there any way to return back to stock if I accidentally soft brick it or make some mistake?
PS : I have quite of experience in rooting, flashing ROMs and other stuff.
Thanks in advance
Sent from my Motorola Defy using CM9
first of all have you unlocked your bootloader via htcdev.com???
Check the stickies or try search feature :what:
Sent from my Marvelc using XDA
heres a couple of links that should help
return to stock
http://forum.xda-developers.com/showthread.php?t=1740664&highlight=root
root and custom recovery (for gsm)
http://forum.xda-developers.com/showthread.php?t=1616326&highlight=root
or
http://forum.xda-developers.com/showthread.php?t=1721545&highlight=root
ics/cm9 rom (best i found)
http://forum.xda-developers.com/showthread.php?t=1633198
hope this helps
i tried the unofficial /cm9 mod for wildfire s released on 26th of june, the rom is butter smooth with everything normal except the camera(it doesnt work), but the previous versions seem to have a working camera. although i will wait for a fix.
Sweet, thanks
Hey Guys.
I am new to this community site. I own a LG Optimus P350 phone.. its Android version is the default 2.2 Froyo as provided by the manufacturer. Few days back i rooted the phone using Gingerbrek.. Now i want to upgrade my Android version. Firstly i want to ask which ROM would be suitable for my cell phone.. and what are the steps to do upgrade the ROM? Also i want to ask is how do i move the factory installed apps in my cellphone (like facebook, etc) to SD card since my phone is already rooted... please go easy with the language i am a noob with such stuff so far... I did try looking out for the solution in other threads but could not find the answer (or maybe couldn't understand it )...
thanx...
madmanzrocks said:
Hey Guys.
I am new to this community site. I own a LG Optimus P350 phone.. its Android version is the default 2.2 Froyo as provided by the manufacturer. Few days back i rooted the phone using Gingerbrek.. Now i want to upgrade my Android version. Firstly i want to ask which ROM would be suitable for my cell phone.. and what are the steps to do upgrade the ROM? Also i want to ask is how do i move the factory installed apps in my cellphone (like facebook, etc) to SD card since my phone is already rooted... please go easy with the language i am a noob with such stuff so far... I did try looking out for the solution in other threads but could not find the answer (or maybe couldn't understand it )...
Click to expand...
Click to collapse
Ok guy i'm new on this community site too, but i research much to try increasing the performance of my phone. So let's Go.
U want to upgrade from versions : v10a -> v10c or just update it? Answer and i will be happy to help u.
DarkRising said:
Ok guy i'm new on this community site too, but i research much to try increasing the performance of my phone. So let's Go.
U want to upgrade from versions : v10a -> v10c or just update it? Answer and i will be happy to help u.
Click to expand...
Click to collapse
hey.. thanx for the reply... I am not asking how to upgrade the firmware version (the one you mentioned v10a -> v10c).. I am asking how do i upgrade my Android version... currently i have 2.2 Froyo.. I want to upgrade to 3.0 or 4.0 or any suitable ROM better than my current Android version
Cyanogen
madmanzrocks said:
Hey Guys.
I am new to this community site. I own a LG Optimus P350 phone.. its Android version is the default 2.2 Froyo as provided by the manufacturer. Few days back i rooted the phone using Gingerbrek.. Now i want to upgrade my Android version. Firstly i want to ask which ROM would be suitable for my cell phone.. and what are the steps to do upgrade the ROM? Also i want to ask is how do i move the factory installed apps in my cellphone (like facebook, etc) to SD card since my phone is already rooted... please go easy with the language i am a noob with such stuff so far... I did try looking out for the solution in other threads but could not find the answer (or maybe couldn't understand it )...
thanx...
Click to expand...
Click to collapse
Look this posts:
http://forum.xda-developers.com/showthread.php?t=1610605
(I am Brazillian, sorry by my English)
There you have the oficial CyanogenMod 7 rom support, instalation and development issues support.
In my opinion it is the best 2.3 alternative rom for p350.
The steps i know only in portuguese, but i believe i will find it in this link too.
The factory installed apps, the most one you will install with a Google package inside this link too.
The others you can download again on play store.
following a different guide i was trying to install CM Invasion V2 ROM.. i never got to the flashing ROM part... i was backing up the current ROM unsing ROM manager and my cell fone bricked... after banging my head... looking for solutions on the net and again banging my head... i finally was able to revive my cell fone (using kdz updater)... all this is a risky business
can anyone give me a near perfect guide for flashing ROM without using ROM manager.. please..
You'll have to flash a custom recovery first. Amonra is very stable. Then you can make a nandroid backup of your current rom from the recovery for you to go back to. Flash the rom you like and enjoy. If you need to do back to your original rom, just restore back from your nandroid backup
madmanzrocks said:
following a different guide i was trying to install CM Invasion V2 ROM.. i never got to the flashing ROM part... i was backing up the current ROM unsing ROM manager and my cell fone bricked... after banging my head... looking for solutions on the net and again banging my head... i finally was able to revive my cell fone (using kdz updater)... all this is a risky business
can anyone give me a near perfect guide for flashing ROM without using ROM manager.. please..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1816199&highlight=recovery
now flash recovery by going on thread then do steps
for flashing roms do following steps on recovery
1.creat nandroid backup only once not for everytime you flash
2.then go in wipe section and wipe all data
3.then go to flash zip manu and find rom then flash
4.sometimes some rom needs advanced steps for flashing like cm 7 official needs to format/system(steps for it it mentioned by the developer on his thread)
done reboot then enjoy flashing.
hope this will help you...........................
in future do not install recovery from rom manager it will brick your phone untill it gets perfect for our device
Remember we have a wiki page for this phone with an all-in-one guide for modifying it (rooting, recovery, custom rom installation, troubleshooting). I try to keep it updated, nice and clean (kinda hard some times).
About Android versions: The Optimus ME comes with Froyo (2.2) there is no other official firmware for it. CyanogenMod 7 is based on Gingerbread (2.3) which now has official support and is working pretty good now (yes, previous versions were slow, buggy but now they're pretty stable)... Honeycomb (3.0) is only for tablets, so it's not coming to P350. CyanogenMod 9 is based on Ice Cream Sandwich (4.0), which for this device is still a work in progress, so don't expect a timeline nor a soon release. CyanogenMod 10 based on Jelly Bean (4.1) is still a myth for the P350...
I hope to have answered your questions...
dbarrera said:
Remember we have a wiki page for this phone with an all-in-one guide for modifying it (rooting, recovery, custom rom installation, troubleshooting). I try to keep it updated, nice and clean (kinda hard some times).
About Android versions: The Optimus ME comes with Froyo (2.2) there is no other official firmware for it. CyanogenMod 7 is based on Gingerbread (2.3) which now has official support and is working pretty good now (yes, previous versions were slow, buggy but now they're pretty stable)... Honeycomb (3.0) is only for tablets, so it's not coming to P350. CyanogenMod 9 is based on Ice Cream Sandwich (4.0), which for this device is still a work in progress, so don't expect a timeline nor a soon release. CyanogenMod 10 based on Jelly Bean (4.1) is still a myth for the P350...
I hope to have answered your questions...
Click to expand...
Click to collapse
thank you bro... can you provide me the link for it?
For the wiki? It is at the top of the page, where it says Wiki...
Hello,
after having had a HTC Desire HD I have upgraded (actually downgraded) to a Samsung Galaxy Fame S6810p.
However, as I am not very satisfied with TouchWiz and the bloatware on the phone I would like to flash a 'vanilla' ROM on the device, a task which is quite new for me, but something I would like to learn.
Having read myself into ROM Managers, Goo Managers, etc. I have not been able to find any ROM suitable for the S6810p. Therefore here few basic questions before I continue reading on:
- can I only used ROMs that have been adapted to my phone?
- Is there a vanilla ROM for my phone (Samsung Galaxy Fame s6810p)
- and if not, how much is the effort to port one to my phone?
I had used the search function looking for entries for Galaxy Fame etc and have not found anything (apart from rooting the phone)
Thanks
CM
CWM recovery for s6810p
hey. I hav recently rooted my samsung galaxy fame and wanted to know wer can I get CWM recovery for it. I hav tried the rom manager but it does not show my model in the list. so can u please tell me how to get clock work recovery in samsung galaxy fame s6810p. thnx in advance.
crasermaser said:
Hello,
after having had a HTC Desire HD I have upgraded (actually downgraded) to a Samsung Galaxy Fame S6810p.
However, as I am not very satisfied with TouchWiz and the bloatware on the phone I would like to flash a 'vanilla' ROM on the device, a task which is quite new for me, but something I would like to learn.
Having read myself into ROM Managers, Goo Managers, etc. I have not been able to find any ROM suitable for the S6810p. Therefore here few basic questions before I continue reading on:
- can I only used ROMs that have been adapted to my phone?
- Is there a vanilla ROM for my phone (Samsung Galaxy Fame s6810p)
- and if not, how much is the effort to port one to my phone?
I had used the search function looking for entries for Galaxy Fame etc and have not found anything (apart from rooting the phone)
Thanks
CM
Click to expand...
Click to collapse
1st yes you can only use a rom adapted to your phone
2nd vanilla rom? I don't think there is any custom rom for this model
3rd you have to try anyway first find a phone that suits your hardware specification and port a rom from that device
nobody knows a suitable rom for this device?
samsung galaxy fame low memory
mets90 said:
nobody knows a suitable rom for this device?
Click to expand...
Click to collapse
hai guys!!!! i just bought this samsung galaxy fame a few days back ovrall the device is good with a best camera @5 mp with autofocus. but huge cons goes with low memory on mutiple tasking and hanging of the ui. guys can u plz solve the low memory with the default rom or any new rom flashable plz let me know!!! hoping to find a way soon
A friend of mine have this phone and she asked me about upgrading it cause she realise it was getting really slow, etc.
So came here and was wondering if there is anything liek ROM, upgrade, firmware etc for this phone that I can spice up her phone a bit.
First of all we need a CWM, i want to do a port from another rom, but without cwm it's impossible to install it:crying:
mets90 said:
First of all we need a CWM, i want to do a port from another rom, but without cwm it's impossible to install it:crying:
Click to expand...
Click to collapse
try to build a cwm in builder try google search
and 1 more thing you don't need cwm to install a rom you can create odin flashable tar files also
sangalaxy said:
try to build a cwm in builder try google search
and 1 more thing you don't need cwm to install a rom you can create odin flashable tar files also
Click to expand...
Click to collapse
How can i create a Tar files from another rom? i hope the galaxy ace rom work on fame flashed it with odin:silly:
mets90 said:
How can i create a Tar files from another rom? i hope the galaxy ace rom work on fame flashed it with odin:silly:
Click to expand...
Click to collapse
Did you try this to see if it will work?
So...
So has anyone found a CWM for this phone yet? It's driving me crazy! I'm starting to regret buying this phone because of this. How is it that nobody has done a port yet? The phone has been out for more than a year.
I'm wondering what else will pop up for this.
positiveg said:
I'm wondering what else will pop up for this.
Click to expand...
Click to collapse
Please help us!
mets90 said:
Please help us!
Click to expand...
Click to collapse
Like you I'm still waiting
In this post are a CWM version for S6810. I don't have test it. Maybe you can do it, and tell us.
http://forum.xda-developers.com/showthread.php?t=2495467
Sent from my YP-G1 using xda premium
viercame said:
In this post are a CWM version for S6810. I don't have test it. Maybe you can do it, and tell us.
http://forum.xda-developers.com/showthread.php?t=2495467
Sent from my YP-G1 using xda premium
Click to expand...
Click to collapse
I'm in the same situation of many other users: this phone is really slow with the stock rom after some months of medium usage. I'm not a developer, I really don't know hot to create a new rom, but I can use my Galaxy Fame as a tester for a great new rom made in xda :good:
A pure Android experience like Cyanogenmod should be very useful for this phone, it could be much more light and smooth than the stock rom.
Many others phone (for example Galaxy W, Galaxy S Plus...) has some good roms that are CM based. It's a pity that Galaxy Fame hasn't any specific section on this incredible Forum I'm sure that many people will find interesting and useful a Galxy Fame Section with Android Development, Q&A, ecc...
Once you root the phone you can at least disable/freeze some of the bloatware that comes with the phone using Titanium Backup Pro, but yes, a clean custom ROM would make a world of difference and hopefully help with the freez-ups.
Also an overclock/undervolt kernel would be useful.
anyone tried the cwm posted?
CLOCK WORK MOD, or CWM, is not a rom, so does not count, i also am regreting buying this phone for the lack of custom roms..........gues we can't have anything, and have to move along to other devices.
http://forum.xda-developers.com/showthread.php?t=2582851
Sent from my YP-G1 using xda premium