Help Needed , Urgent - Defy General

i flashed sbf of Indian Froyo as per thread , i came from cm7.2 nightlies. now after flashing sbf my phone struck on android boot screen it is not booting up! nothing is coming now. please help a new defy has just gone bricked
pm me solution plz..

1. Power phone off
2. Press Vol - and Power simultaneously
3. Phone will power on and you will see a triangle with ! in it.
4. Press Vol+ and Vol- simultaneously.
5. Wipe cache
6. Reboot.
P.S. This thread is not for the developement section. Try General next time.

zed_fauji said:
i flashed sbf of Indian Froyo as per thread , i came from cm7.2 nightlies. now after flashing sbf my phone struck on android boot screen it is not booting up! nothing is coming now. please help a new defy has just gone bricked
pm me solution plz..
Click to expand...
Click to collapse
in the future... please read all the tutorials and be prepared for anything you are going to do on your phone.
1. Turn off your phone
2. Go to recovery (hold Power + Vol-)
3. When the android triangle shows up pres Vol+ and Vol- buttons at the same time
4. Wipe data
5. Wipe cache
6. Reboot your phone and go to bootloader (Power + Vol+)
7. Flash your SBF via RSDlite
That`s the whole procedure how to downgrade to Froyo. I think that you forgot to do some of these steps but in my opinion go again from the beginning.
EDIT: Seems I`m 2 min`s too late

yeah thats all rite , but now what should i do ? i flashed it 2-3 times. but i ain't getting any kind of recovery . its just struck on boot screen. tell me how would i wipe cache when there is now recovery coming out.?

Related

[Q] Bricked Moto Defy

I have bricked my Motorola Defy.
I have tried flashing a new ROM using RSD Lite (following this guide). It says 'complete' but my phone will not turn on. Sometimes it will just show the Moto boot logo but never fully boot up. I can only open the boot menu.
The ROMs I have tried flashing can be found here (All UK 2.1 at the top of the page).
Background - I got into this mess by attempting to flash the Gingerbread UI ROM (here).
Does anyone have any ideas? I would really appreciated any suggestions.
Thank you.
Probably you have flashed a firmware which cannot be downgraded to eclair. Try to get again in the bootloader and flash a froyo build (the official french one, for instance).
Hope this helps
Sent from my MB525 using XDA App
but supposedly it is still an éclair ROM so it shouldn't be the reason... best thing would be to flash an original 2.1 rom, I'm sure you can find one on the development section. Make sure to have a fully charged battery though - charge it on someone else's phone, for example.
It's most likely a problem with cache. Power your phone with Volume Down holded, when in recovery press Volume Up + Down, clear data/factory reset, clear cache.
rafaccb said:
but supposedly it is still an éclair ROM so it shouldn't be the reason... best thing would be to flash an original 2.1 rom, I'm sure you can find one on the development section. Make sure to have a fully charged battery though - charge it on someone else's phone, for example.
Click to expand...
Click to collapse
Hi, thanks for the reply.
I have tried using the UK ROMs here: h**p:// and-developers. com/sbf:defy but none have worked. Any other suggestions?
Thank you.
antony.ps said:
It's most likely a problem with cache. Power your phone with Volume Down holded, when in recovery press Volume Up + Down, clear data/factory reset, clear cache.
Click to expand...
Click to collapse
Hey, unfortunately I cannot get into recovery, only the boot menu. Do you have any other suggestions?
Try flashing a JRDNEM_U3_2.59.0 sbf.
ABC_Universal said:
Try flashing a JRDNEM_U3_2.59.0 sbf.
Click to expand...
Click to collapse
Thanks, I will try now. Any particular country?
ABC_Universal said:
Try flashing a JRDNEM_U3_2.59.0 sbf.
Click to expand...
Click to collapse
Hey.
I have just tried this using the Australian version from here:h**p://and-developers.com/sbf%3adefy
Unfortunately, it did not work. I still cannot boot the phone.
Thanks for your advice, do you have any other ideas?
Have you tried one of the 2.51 version roms?
like JRDNEM_U3_2.51.1 Blur or
JRDNEM_U3_2.51.0 deblur.
Kaljam
kaljam said:
Have you tried one of the 2.51 version roms?
like JRDNEM_U3_2.51.1 Blur or
JRDNEM_U3_2.51.0 deblur.
Kaljam
Click to expand...
Click to collapse
Hi, yes I have tried the UK JRDNEM_U3_2.51.1 from here. Is that the same as blur or deblur?
Thanks.
Just an update...
All ROMS I have tried have installed OK through RSD Lite. The result is always 'Finished' or 'PASS'. But then when I try to turn my phone on, it never boots up.
I really appreciate the replies so far. If anyone has any further ideas, I would love to hear them.
Thank you.
UPDATE
I have just flashed the latest froyo leaked ROM as suggested around the net. Slight progress, the phone now boots to the moto boot logo but no further?
Does anyone have any ideas from here?
Thank you.
you do know that after flashing an sbf it takes a very LONG time to boot the first time! I just hope you are not giving up after a a couple minutes of M logo and pulling the battery or something it literally takes like 5 minutes.
You said you are still able to enter bootmenu? That is not possible after flashing an sbf, as it wipes the bootmenu away! Are you talking about bootloader?
Pull the battery and immediately put it back in while holding vol down. If the phone does not turn on just by inserting the battery then continue to hold vol down and press the power button for about 3 seconds, do not let go of vol down. Continue holding vol down until stock recovery appears.
Once you're in stock recovery press vol up AND vol down at the SAME TIME. Now use the volume toggle to select wipe date/factory reset, use the power button to make your selection, then wipe cache partition. Reboot
Walk away for like 5-10 minutes and check back on it.. Theres no reason it shouldn't work
zyxwvut said:
you do know that after flashing an sbf it takes a very LONG time to boot the first time! I just hope you are not giving up after a a couple minutes of M logo and pulling the battery or something it literally takes like 5 minutes.
You said you are still able to enter bootmenu? That is not possible after flashing an sbf, as it wipes the bootmenu away! Are you talking about bootloader?
Pull the battery and immediately put it back in while holding vol down. If the phone does not turn on just by inserting the battery then continue to hold vol down and press the power button for about 3 seconds, do not let go of vol down. Continue holding vol down until stock recovery appears.
Once you're in stock recovery press vol up AND vol down at the SAME TIME. Now use the volume toggle to select wipe date/factory reset, use the power button to make your selection, then wipe cache partition. Reboot
Walk away for like 5-10 minutes and check back on it.. Theres no reason it shouldn't work
Click to expand...
Click to collapse
Hey,
I have just got back from dropping of the phone with T-Mobile - Damm!!!!!!!
Thanks for the detailed explanation. I must have talking about the bootloader. Not the menu. I will head back to the shop in the morning and collect it back off them. Hopefully as it is a Saturday they have not sent it off?
Sooooo frustrating!!!!!!!!
I will update you when I have got it back and tested the above.
Thanks again,
Chris.
LOL I know what you mean... I had instant heart failure the first time I was stuck in a bootloop!!! Thought I wasted $400
I just panicked and gave up.. damm! Loads of people have said that its almost impossible to brick a defy. Fingers crosses thats true!! Lol
First, sorry for my english.
I have a similar problem. I flashed the official french froyo.
First it runs good. But today, two days later, the defy reseted automaticaly.
Several times.
Then I did a wipe. At the end the defy reseted automaticaly and stopped at the motorola logo. I flashed again. At the end of the flash, when RSD boots the defy, it stopped at the logo again. After...it must have been 15 minutes I pulled the battery and tried to get into the bootloader for a wipe.
But I can't enter the bootloader (vol up + power). The motorola logo appears and nothing happens. The last time I waited over 30 minutes.
OK, I have my phone back from T-Mobile...here it goes!!! (fingers crossed).
EDIT
Battery is out - will re-charge with the USB cable trick..
zyxwvut said:
you do know that after flashing an sbf it takes a very LONG time to boot the first time! I just hope you are not giving up after a a couple minutes of M logo and pulling the battery or something it literally takes like 5 minutes.
You said you are still able to enter bootmenu? That is not possible after flashing an sbf, as it wipes the bootmenu away! Are you talking about bootloader?
Pull the battery and immediately put it back in while holding vol down. If the phone does not turn on just by inserting the battery then continue to hold vol down and press the power button for about 3 seconds, do not let go of vol down. Continue holding vol down until stock recovery appears.
Once you're in stock recovery press vol up AND vol down at the SAME TIME. Now use the volume toggle to select wipe date/factory reset, use the power button to make your selection, then wipe cache partition. Reboot
Walk away for like 5-10 minutes and check back on it.. Theres no reason it shouldn't work
Click to expand...
Click to collapse
Hey, I am still have issues...
I have charged it up but cannot access recovery. I have tried taking out the battery and putting it back in while holding vol down but no luck. I have also tried holding the power button as well like you said.
I am going to leave it charging even longer to see if that helps.

Android 2.3.3 Problem

I tryed to put 2.3.3 on my Motorola Defy MB525 but i got stuck.
I installed GingerBreak 1.20 and root the phone,after this i flash with RSD Lite
RSD Lite said the result pass but when i restart my phone it freeze at Motorola symbol(first screen)
Can somebody help me
Don't forget to wipe the phone after RSD flashing, otherwise it will encounter the bootloop
camin10 said:
I tryed to put 2.3.3 on my Motorola Defy MB525 but i got stuck.
I installed GingerBreak 1.20 and root the phone,after this i flash with RSD Lite
RSD Lite said the result pass but when i restart my phone it freeze at Motorola symbol(first screen)
Can somebody help me
Click to expand...
Click to collapse
I'm sorry to hear you have problems, I don't think I can help you, but can you please tell me where you got your 2.3.3 fw and what languages does it support?
maxzat said:
I'm sorry to hear you have problems, I don't think I can help you, but can you please tell me where you got your 2.3.3 fw and what languages does it support?
Click to expand...
Click to collapse
I downloaded the 2.3.3 from here http://forum.xda-developers.com/showthread.php?t=1081957
@mys_721tx
Can you tell me how to wipe the phone?
I got stuck when i press volume down button it appears a little android
To enter stock recovery start your phone by pressing Vol Down + Power. Then when the android icon with the exclamation mark appears press the right bottom of your screen (if you are on Eclair) or press both Vol Up + Vol Down buttons if you are on Froyo. Then for navigation use volume buttons and for selection/enter use the power button.
nepotu said:
To enter stock recovery start your phone by pressing Vol Down + Power. Then when the android icon with the exclamation mark appears press the right bottom of your screen (if you are on Eclair) or press both Vol Up + Vol Down buttons if you are on Froyo. Then for navigation use volume buttons and for selection/enter use the power button.
Click to expand...
Click to collapse
THX nepotu
[In nepotu language: deci dupa ce dau wipe la tot va merge?]
Still don't work i root with ginger break,then i flash with RSD Lite when the phone restart i press vol down button i do wipe data/factory reset ,i reboot the phone and nothing
I'm not sure if I got it right but you are saying that you have rooted it with gingerbreak. If I'm not wrong you are/were for the moment on Eclair of Froyo so you do not need to use a tool that is useful to achieve root on Gingebread. You must install Gingerbread first then root it.
I must admit that I haven't tried this ROM (there were so many bugs reported on the ROM thread so I decided I'll stay on latest CM7 beta) but you can try it on your phone using one of the next methods:
A) By applying a nandroid backup and then flashing a fixed SBF (by doing so you'll keep you downgradability)
- install ClockworkMOD recovery
- wipe cache, data, dalvik cache
- install the nandroid
- reboot phone in bootloader
- apply fixed SBF
B) By applying a full SBF
- reboot in stock recovery
- wipe data, cache....
- reboot in bootloader
- flash full SBF
Then you can root it with Gingerbreak.
Sincerely I strongly recommend you to install a more stable ROM like the Nordic one or the official French (both based on Android 2.2.2).
Hope it helps. It you'd like I can give you more details via private messages in Romanian.

[Q] SBF flash faild? CM7

hi,
i have troubles with my phone :-(
1) i installed CM7 RC0 over my stock ROM - 2.2.1 i think?
2) i want to upgrade to RC1v2...and so i tried to install JRDNEM_U3_3.4.2_177-005 first, cause its recommended.
3) while using RSD lite v5.3.1 in the last step, after rebooting the device, after the Motorola logo, an ANDROID logo appeares.
4) this ANDROID logo dosent freeze, but it dont goes away
no button is working - tried to remove battery but same happens again.
any ideas how to fix it? thx korros
remove your accu.
push power + vol down and replace the accu
the android should shown.
now push vol down + vol up.
now use the vol down to chose wipe/ factory reset.
now chose yes.
now reboot your phone and wait around 5-10 minutes.
sorry a my poor english
saved my day! thx!
that whas the same trouble i had 3 days ago.
a nice user of a german forum whas helping me

Help plz Phone not woking anymore

alright i have root my defy and install 2ndinit to install cyanogenmod7, i did install it and when i open the phone its stay on the boot screen where u see the cyanogene7mod and freeze there. i have tried going back to 2ndinit by restarting the phone and holding the volume down and all i get is a triangle with a ! and a droid mascot or sometime it ignore it and goes straight to the cyanogene boothing and still freeze here
im a noob with those thing so i need help please asap and sorry if my english is bad
tiguy08 said:
alright i have root my defy and install 2ndinit to install cyanogenmod7, i did install it and when i open the phone its stay on the boot screen where u see the cyanogene7mod and freeze there. i have tried going back to 2ndinit by restarting the phone and holding the volume down and all i get is a triangle with a ! and a droid mascot or sometime it ignore it and goes straight to the cyanogene boothing and still freeze here
im a noob with those thing so i need help please asap and sorry if my english is bad
Click to expand...
Click to collapse
Hi,
I think you should read this http://forum.xda-developers.com/showthread.php?t=1065798 and check that you have the right version of bootmenu.
Answer n°5 may help you to start over again.
I have been through this a few days ago, it is quite easy but there is a lot of reading.
The most important thing is to read everything so you can understand what you do.
thx for the quick answer i have try step five but when i do that it bring me to a black screen with a white triangle and a ! in it. i really dont know what else to do
hit both volume buttons at same time it will make a menu visable then choose factory reset
also cm7 flashes a new bootloader so you might have to flash reboot into recovery for cm7 then install again
holding both volume button and the power one does not work it bring me to cyanogene boot loop
You have to press them when you are in the stock recovery menu.
but i cant go in the stock recovery menu or i dont know how cause pressing the down buton i still go to the boot loop and if i do power plus down button i get to a triangle with a ! inside it
To enter stock recover do:
Shutdown phone
Start phone by pressing power + volume down (hold both keys for a few seconds)
Once the android with the exclamation mark is displayed push volume up and down at the same time.
Then you're in stock recovery.
that's great man thx, and what to do once im in there?
wipe data and factory reset
it tell me 4 thing
reboot system( do nothing)
apply sd card :update.zip (saying there is nothing like that on my sd)
wipe data/factory reset
wipe cache partition
i would like to know what to do from this point on cause i got nothing now in my phone
i did the wipe data and factory reset now when i start my phone it stay on the M logo
now reflash cm7
alright i did flash but i put back 2.2.1 in it i wont play with that anymore lol thx
your welcome

Defy+ brick!!

Hello everyone, I defy the + with CM7, I flashed a stock subject to collection and cellulite is gone bootloop or white LED only lights. how can I fix this? thanks
just flash the right ROM!
The same as you had before !
henno88 said:
just flash the right ROM!
The same as you had before !
Click to expand...
Click to collapse
tried but to no avail .. or goes to black screen and boot loop or white LED.
up please, thanks
http://forum.xda-developers.com/showthread.php?t=1216982
Most things are the same for defy and defy+
Off course not the downgrade and warranty stuff.
"I downgraded from CM7 to Stock / Installed a new SBF but I'm having bootlops: (!) If this is happening to you, after flashing the Stock SBF, enter in Stock Recovery and do a full wipe (Data/Cache) and reboot."
"How do I enter Recovery Mode?!: With the Phone off press VOLUME DOWN then, while still pressed, power up the phone and leave VOL key pressed until you see a Yellow triangle, once you see this you are in Recovery now press Vol Up and Vol Down at the same time (if you are in Froyo) and the menu will appear, if you are on Éclair the menu should appear without having to press anything."
Hope it helps
Edit:
Didn't see the (!), it says not for Defy+, you can try
maybe you have flashed a wrong sbf, that make it brick, we call it fake brick in China
thankssssssss labsin!!!! great
Almost Bricked
Hi,
I own a Defy+ which is 3 weeks old. I followed rooting(Doomlord) to Custom Mod Cm7. Got greedy and tried to Install ICS(quarx) and my phone bricked. Now in bootloader part were I use RSDlite v5.6.4, Abd v5.0 and Stock Rom vDEFYPLUS_U3_4.5.1-134_DFP
Now Rsdlite flashes and all things happen and I get stuck at the status were it says 'Please Manually Power Up this Phone' and keep seeing that Red M logo loading all day long.
I have tried to flash Uk retail version too but the result is same.
I have a backup of all apps and stock rom in SD card. Dono how to use it.
Please help me I waited for a long time to own a Defy+
Thanks
McGgiver hack look it up works only way or full charge battery on other defy
Sent from my MB525 using xda premium

Categories

Resources