Hello People,
I'm in the crap from toes to neck. My brother was playing with my phone and I don't why he tried to install the Clockword mod recovery. He then turned off the phone. So now I cannot turn it on, put it on download mod and start the stock android recovery.
Can somebody help me. It is my work phone. I have all my important contacts & stuff inside.
Thanks in advance.
spryartist said:
Hello People,
I'm in the crap from toes to neck. My brother was playing with my phone and I don't why he tried to install the Clockword mod recovery. He then turned off the phone. So now I cannot turn it on, put it on download mod and start the stock android recovery.
Can somebody help me. It is my work phone. I have all my important contacts & stuff inside.
Thanks in advance.
Click to expand...
Click to collapse
If your brother installed CWM into your phone, than your phone is rooted, isn't it?
You can download your Stock Rom ( you can find on the phone box your version XWKD1 or XWKF2 )
Stock ROM FROYO 2.2:
For Euro B7510 XWKD1 : http://hotfile.com/dl/127133994/17d5d98/B7510XWKD1_OXXKD1_XXKC3_bysamsdroid.rar.html
For Euro B7510 XWKF2 : http://hotfile.com/dl/124407579/8bb1563/B7510_PRO_B7510XWKF2_.zip.html
---------- Post added at 11:17 PM ---------- Previous post was at 10:34 PM ----------
Now you need Odin v4.28 : http://www.multiupload.com/B12P3BJBE6
Samsung Kies installed in your PC....( I hope that you have already installed the application on the PC)
■Now, after finishing the download you will have to now ensure that you are turning your phone off so that the download mode which is nothing but the safe mode is activated in your phone. After turning Off the phone, you will have to first push the “Q” button to enter in to the download mode which will look like as shown in the below screen shot. If you have successfully entered into the download mode then you will see a green screen which is shown below. Also, additionally note that if the device boots in the normal mode with the home screen then you will have to again switch off the device and retry the process and if despite retrying you are unable to get into download mode then you will have to fix the download mode error for your phone. You can see the download mode screen on how it looks like.
Poza1 ....http://www.4shared.com/photo/zA0HoG80/Poza1.html
■Now, after this you will have to connect the phone to the computer where you have downloaded and extracted the zip file from the above link. Please note that while connecting the USB cable you will have to make sure that the Odin software is open as mentioned and shown above, as soon as you connect the phone to the Odin, the ID COM block will turn yellow after which you will have to enter the files by clicking on the corresponding options as shown below,
Poza2.....[IMG]http://www.4shared.com/photo/k33bdHec/Poza2.html
BOOT – APBOOT_B7510...................md5,
Phone – MODEM_B7510....................md5,
PDA – CODE_B7510..........................md5,
CSC – ....B7510.......CSC...................md5,
■As soon as you feed in the files, you will have to double check the same and then you will have to proceed and click on the “Start” option to start the firmware update process. After clicking on the start, you will see that the firmware will be installed in your phone within a time of not more than 5 minutes.
Poza3......[IMG]http://www.4shared.com/photo/J-0BuaB2/Poza3.html
■Now, you can see that the flashing process is being in process and you will have to make sure that you don’t interrupt the flashing process as this may be fatal for your phone. So, after few minutes of time you will see the Odin screen as shown below,
Poza4......[IMG]http://www.4shared.com/photo/Iyc1MxXQ/Poza4.html
Now, that’s it as soon as you see that the above screen is shown in the Odin, you will have to wait for the home screen to see in the phone and there you go, you have now successfully instal.
Euro B7510 XWKF2 dont have
Phone – MODEM_B 7510.... ....... ....... ..md5
you have this file?
When my galaxy pro is in download mod, on pc driver samsung usb composite device not start win7 so odin is not turn yellow.
I have latest version kies driver, i start odin with administrator. All securty are off. When I connect usb, there is one driver on pc sam.. composte device device but not startted with ( error 10) on win 7…
What should I do?
Related
Use this tutorial only with the Samsung Galaxy S4 ACTIVE shv-e470s smartphone.
CAUTION:THIS ROOTING METHOD IS ONLY FOR THE KOREAN VERSION SHV-E470S!!!
It was tested successfully on Samsung Galaxy S4 Active SHV-E470S Android version 4.2.2
Firmware version:E470SKSUANA1
Abstract:
Do not attempt to root any other smartphones with the files that you wil find in this articles.
This tutorial is destined to be used by advanced Android users.
I won’t be blamed in case you brick the phone or lose any data in the process!!!
Rooting the Galaxy S4 ACTIVE SHV-E470S will revoke its warranty. If you want to restore your phone's warranty then you will need to flash an official Samsung Android ROM OS.
Pre-requisites :
Download and install the Samsung USB Drivers on your computer
Disable Samsung KIES program if you have it installed on your computer
Disable any antivirus applications from running on your computer
Enable USB Debugging from Developer Options.
If Developer Options doesn’t appear in Settings, then you need to enable it.
go to Settings, then More, open About Device.
tap seven times on the Build Number.
you will now be enabling Developer Option, go back to main Settings section, scroll down and enable USB Debugging
Check your phone’s battery and make sure that there is at least 50% left before the device switches off
Read the entire post, don’t skip any steps and the guide should be completed in under ten minutes with success.
In case you have trouble completing the guide, then you are free to ask for extra help in comments
Download required files (see attachments)
Odin3 1.85
UPDATE-SuperSU-v1.93
unofficial_philz_touch_6.12.8-e470s
Process:
1. Copy the "UPDATE-SuperSU-v1.93.zip" into your phone internal or external memory
2. Extract the contents of the Odin zip file and place them on your computer’s desktop screen.
3. Power off the Galaxy S4 active shv-e470s now.
4. After that you have to boot the device in Android Download Mode (press and hold: volume down,home and power buttons}
5. Launch Odin on your PC as administrator
6. Connect the phone with your computer via USB cable.(make sure antivirus+firewall is now disabled!!)
7. Wait for ODIN to detect your device,(you should see the "added" message) then continue to the next step.
8. If the phone is not recognized by your PC, then you should re-install the Samsung USB Drivers.
9. Go to ODIN’s main window, click on PDA and then find the "unofficial_philz_touch_6.12.8-e470s.tar" Load it in ODIN.
10. Do not change any other Odin default settings
11. Make sure that the Re-Partition option is not enabled
12. When ready, hit the START button for the process to begin.
13. Don’t press any buttons until the process is complete
14. When ODIN completes the process it will show the PASS alert, then the phone will reboot in normal mode. You can unplug the device from PC when the Samsung Galaxy S4 active shv-e470s boot animation screen loads.
15. Now power off your phone again and boot in recovery mode (press and hold: volume up,home and power buttons)
16. Once in recovery mode,find and install the "UPDATE-SuperSU-v1.93.zip" .To do this,in the recovery menu choose the "install zip" option and then find the directory u have saved the zip file and choose it for installing.
17. Wait for the process to finish and then ur phone will reboot.once reboot u can download "root checker" from play store and verify that u have root access.
18. Have fun and enjoy your rooted SHV-E470s
Did anyone try with E470SKSUAND1 yet?
story said:
Did anyone try with E470SKSUAND1 yet?
Click to expand...
Click to collapse
I tried and it works.
req new download links
The download links has expired . please give me another links.thx
This phone is update to 4.4.2. Are we can't root our phone such as #1?
new files
nickserbanoiu said:
The download links has expired . please give me another links.thx
Click to expand...
Click to collapse
hello my friend....i just renewed the files.
Thanks you !
how about 4.4.2 root, can we use this tool to root?
story said:
I tried and it works.
Click to expand...
Click to collapse
Hi, I also have E470SKSUAND1, but my recovery mode only shows me 4 or 5 options, no install zip option. I looked for the cwm but the shv e470s isn´t supportet yet. How did you do it?
Hi, I need pit file for this phone or 2gb system dump. Pls help me. My phone is brick now.
shv-e470s
Thanh_GSM said:
Hi, I need pit file for this phone or 2gb system dump. Pls help me. My phone is brick now.
Click to expand...
Click to collapse
Bro!! did you repair your shv-e470s boot-loader ?
i have hard bricked my shv-e470s any help?
Does anyone try on E470SKSUCOE1? (lollipop 5.0.1)
Bump for lollipop E470SKSUCOH1 rooting...
Hi, I downgrade my Samsung Galaxy S4 Active (SHV-E470s) from Android 4.4.2 kitkat to Android 4.2.2 JellyBean, Odin says "PASS", it means i successfully flash the 4.2.2 jellybean firmware, then I try to reboot my phone, nothing happens, It won't turn on, I try to charge it but no response, no vibration, it is like completely dead, It is Hard brick? How can I unbrick and revive it? Thank you.
Hy guys i have a G E-975 with korean kit kat from leaked F180K unlocked with freegee and framaroot my phone works perfect boots to recovery normal open and close the same normal my problem is that it doesn't boot to download mode for no reason i installed all the drivers i read all the articles of xda tried many times unistall and reinstall try different computer exactly the same normal boot normal recovery no download mode......please help i want to downgrade to the official but if i can't i will stay to custom for ever.....
soniccm said:
Hy guys i have a G E-975 with korean kit kat from leaked F180K unlocked with freegee and framaroot my phone works perfect boots to recovery normal open and close the same normal my problem is that it doesn't boot to download mode for no reason i installed all the drivers i read all the articles of xda tried many times unistall and reinstall try different computer exactly the same normal boot normal recovery no download mode......please help i want to downgrade to the official but if i can't i will stay to custom for ever.....
Click to expand...
Click to collapse
Stupid question, but are you sure you are doing it right? To enter download mode, first turn the phone off. Then hold both volume buttons, and plug in the USB cable to your computer. Do NOT press the power button. Is this what you are doing?
Also, are you saying you rooted an F180 KitKat with Framaroot?!?! I find that very hard to believe, as it failed for me, and other people also confirmed that it didn't work...
kt-Froggy said:
Stupid question, but are you sure you are doing it right? To enter download mode, first turn the phone off. Then hold both volume buttons, and plug in the USB cable to your computer. Do NOT press the power button. Is this what you are doing?
Also, are you saying you rooted an F180 KitKat with Framaroot?!?! I find that very hard to believe, as it failed for me, and other people also confirmed that it didn't work...
Click to expand...
Click to collapse
sorry dude if i was sure that i made ir right that would be a problem... I have try both with power and volumes +,- and without power deeply black screen nothing more less. My lg is not an F180 is an E975 rooted and cwm recovery with leaked kit kat from the korean F180 i wrote it in first post
Anybody knows how to boot my E 975 into download mode????
any solution i tried from internet didn't work...please help
today tried and hard reset it nothing happens only 2 sort vibrates and nothing more is a protection of the phone or i bricked it any help???
anybody????
The same thing happened to me .. The phone didn't show DOWNLOAD MODE. ... i still flashed the stock kdz by these steps
1.. switch off ur phone
2.. keep the up and down volume buttons pressed and insert the usb cable
3.. open Kdz updater ..
4 .. click read phone information. .and wait for a minute
5.. if it even shows a slight progress seen in the green bar , then you have a go..
Notes
:1.. if the kdz updater even hangs and stops responding while reading ur phone info.. and takes some time.. ur phone is connected in download mode even it shows the slightest progress in the progress bar ( green coloured)
2... if u cant switch off ur phone due to frequent restarts. . just keep the cable connected and the volume buttons pressed while it is restarting
[you can also see ur computer's device mgr for ur phone connection ]
then just flash the Kdz as you do..
I HAVE DONE IT MYSELF several times when my phone didn't show Download mode on the screen.. but cannot guarantee it'll work for you too.. I I'd recommend you to give it a try as it always worked fir me..
BEST IF LUCK
MasterFURQAN said:
The same thing happened to me .. The phone didn't show DOWNLOAD MODE. ... i still flashed the stock kdz by these steps
1.. switch off ur phone
2.. keep the up and down volume buttons pressed and insert the usb cable
3.. open Kdz updater ..
4 .. click read phone information. .and wait for a minute
5.. if it even shows a slight progress seen in the green bar , then you have a go..
Notes
:1.. if the kdz updater even hangs and stops responding while reading ur phone info.. and takes some time.. ur phone is connected in download mode even it shows the slightest progress in the progress bar ( green coloured)
2... if u cant switch off ur phone due to frequent restarts. . just keep the cable connected and the volume buttons pressed while it is restarting
[you can also see ur computer's device mgr for ur phone connection ]
then just flash the Kdz as you do..
I HAVE DONE IT MYSELF several times when my phone didn't show Download mode on the screen.. but cannot guarantee it'll work for you too.. I I'd recommend you to give it a try as it always worked fir me..
BEST IF LUCK
Click to expand...
Click to collapse
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
I already elaborated. . jjust. follow the steps.. i also have the e975 indian..
just reply if you have problems with any steps
---------- Post added at 08:14 AM ---------- Previous post was at 08:10 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
i have flashed it on Win 7 x86 and win 8.1 pro x64
---------- Post added at 08:19 AM ---------- Previous post was at 08:14 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
follow these steps.. :if you have less than 1 gb kdz file
1) Download the latest KDZ from LG's server for your phone via
the app below (kudos to the creator)
http://www.mediafire.com/?cgeb6o5osy2yl9c
2) Make sure you have LG United Drivers already installed,
otherwise download from below
http://www.mediafire.com/?82nt1aeh04aqa3m
3) Download LG KDZ Updater
http://www.mediafire.com/?sj5y073xal03ntw
4) Download the manual adb wipe batch file
http://www.mediafire.com/?ru7erfxsz7p7s3p
5) Put your Optimus G into Download Mode by switching it off,
attaching the usb cable to the phone, holding both the up and
down volume buttons at the same time and lastly inserting the
usb cable into the computer; wait for the drivers to finish
loading if doing it for the first time.
6) Unzip the downloaded updater zip file and run KDZ_FW_
UPD.exe. Use the settings below
Type: 3GQCT
Phone Mode: CS_Emergency
KDZ file: navigate to the folder which you have saved the
downloaded KDZ from the step (1)
Click Launch Software Update and wait for the flash process to
finish
7) Your phone will restart itself when IParam = 90 is displayed
and proceed slower until you see IParam=1 again (which
signals the end of flash, you can safely exit the program then
and remove the cable from the phone). If phone boots up
normally, congrats, skip the steps below and proceed to use the
phone as per normal.
However, this most probably will not be the case for newer
Optimus-es, as the data partition somehow wasn't wiped even
when KDZ-ed, remaining 'dirty', thus causing bootloop or
security infringement.
8) If the phone is stuck at the booting up LG/Telco logo, you
will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx
15secs.
10) Put the phone into recovery mode by holding the volume up
and home button concurrently, then press the power button. Let
go of all the buttons after you see the LG logo on screen for the
2nd time and the screen goes blank thereafter (backlight may
still be on). The phone will kind of reboot and then enters
recovery mode. Repeat the process if you did not get it the first
time.
11) With the phone in Recovery Mode, connect it to the
computer, wait for the drivers to load (if doing it for the first
time), unzip the wipe batch file downloaded earlier from step (4)
, double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully)
boot as per normal.
Hope with this simple guide fellow members will feel safer when
rooting or removing non essential LG wares from their Optimus
---------- Post added at 08:24 AM ---------- Previous post was at 08:19 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
if you have greater thsn 1 gb kdz file
REQUIREMENTS:
MUST HAVE LG DRIVERS
MSXML
.NET FRAMEWORK INSTALLED
1.DOWNLOAD THE ROM/KDZ
2.DOWNLOAD LATEST LG MOBILE SUPPORT TOOL
http://csmg.lgmobile.com:9002/client...2CAppSetup.exe
INSTALL IT WHEN DONE. CLOSE AND END PROCESS ON
TASKMANGER.
3.DOWNLOAD LG R&D TOOL
http://storagecow.eu/index.php?dir=X.../Programs/
4.GO TO DOWNLOAD MODE POW+BOTH VOL BUTTON
PRESSED+CONNECT USB
6) Extract FlashTool and run UpTestEX.exe
7) In R&D Test Tool window,
Select Type = 3GQCT (top left hand side)
PhoneMode = DIAG (top right hand side)
Select kdz file = click to select your LG stock rom *.kdz
Click "Normal web upgrade test" (bottom right hand side)
Then another window will pop up, click "Upgrade Start" button
wait a few seconds, another window "Select Country &
Language" pop up,
=> Country=Republic of Korea
=> Language=English
you can click ok to proceed
8) All Done and wait for finish!
---------- Post added at 08:34 AM ---------- Previous post was at 08:24 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
IMPIRTANT NOTE: DO NOT USE USB 3.0 PORT FOR THIS.. use only usb 2.0 port with a good usb cable as provided with the phone
when i hit update button the app crash for both solutions....
I don't understand my phone works fine but i can't boot to download mode or recovery from the start (with button press) i can boot recovery only with rom manager please somebody which is the combinations for LG E975 for download mode and for recovery because i mess my mind with all this models?????
flash other bootloader in recovery! (z30d mako bootloader but look at updater script and when needed, delete first lines with device info ****...)
2nd Sky said:
flash other bootloader in recovery! (z30d mako bootloader but look at updater script and when needed, delete first lines with device info ****...)
Click to expand...
Click to collapse
hey budy i'm a noob i don't understand what should be needed to delete and replace with what and where is this script make it clearer if that is possible (i don't want to brick my G just want to go back to stock)
ps. so easy to go to custom so hard to go back to stock
Hi guys, so my problem is I was installing a new rom on my rooted D855. everything was going along fine but then the process stalled. I left it running for 15 - 20 minutes but it was still on 33%. I tried holding the power button in desperation which shut the thing down. Now when I try to factory reset it goes to the prompt screen, I answer yes, then it asks me to confirm. from there however it goes to LG splash screen and eventually a black screen with Fastboot mode started. -reset- portcharge -reset- portcharge fastboot: processing commands in the top left corner. That's it.. If I try download mode it goes to the download screen and then to the black screen as described above.
Sounds pretty ordinary but if there is an answer out there I am sure one of you guys will know it.
TIA
i had some similar other issue and the only way i got out of it, is by using the lg flashtool 2014 and the KDZ file appropriate to your version
there is a thread with a step by step instructions.
you launch the flashtool, then insert the kdz file (original stock rom) then you put your phone into download mode (making sure in windows/controlpanel/devicemanager/ports - comp port 41 for the device driver)
you press volume up and plug it into the pc, the pc sees the phone and it starts reflashing the custom rom to your cell.
i presume that as soon as your download mode is working by flashing whatever command is corrupt and makes your phone black should be bypassed by then
i hope it helps - look for the thread how to flash the lg
Thanks I'll give it a shot. Not sure device manager is seeing it properly. I'll have a play and see. Thanks again for the reply
O.K here's the thing, my phone is seen in device manager as a Samsung Android Phone. Under the details tab it shows it connected via USB Modem Phone ADB Port. There is no option to change the port to 41. Anybody who can help I would be very grateful......
I was trying to root my Tablet yesterday following instructions from http://forum.xda-developers.com/showthread.php?t=2531784 and I manage to get to step six, but I wasn't able to put the root in the internal memory the first time so I turned it off and turn it back on without the twrp mode and install it into a folder call document on my tablet, then I try to get it back to download mode ( I flash the twrp without putting it in download mode first, I'm stupid sorry) but it wouldn't go to download mode, holding the buttons I thought maybe I was holding them wrong, but it just get shutting off and opening after like the fifth time it just shut off and won't open anymore. I don't know what to do, did I manage to hardbrick my tablet. I'm sorry if I didn't properly convey my problem I'm still fairly new to the scene, thank you any hello would be appreciated
Download Firmware from here
sammobile
officialrom com/samsung/GT-P5210/
then download odin
turn your tablet to download mode
and link it to computer with usb cable
open odin
Select the auto reboot and f.reset time
click in PDA ..
extract the Firmware
select it
and START
then wait .. Even shows PASS
and u can turn on your tablet
i was trying to root my sm t 113 by looking here
http://forum.xda-developers.com/galaxy-tab-3/general/sm-t113-inception-auto-root-t3129723
i did those steps but the tablet stucks in downloading screen and kies in pc shows connecting for minutes but cant connect probably
- Charge your tablet preferêcia to 100% (no, not know if your PC is fast or not).
2 - Download the file in the description (page 01.) And extract in some folder.
3 - Go to the Samsung website and download KIES. Install and then plug the tablet to see if it identifies all drivers.
4 - Turn off your tablet and enter the download mode (power + volume down button + menu).
5 - You will have a warning message to you incase one kkkkkk terror. Press Volume up and continue. Open the ODIN program.
6 - In the top tab is written with id, your device has to appear there
i did those. IT installed drivers. now what i see is
odin mode
secure download enable
wow download block 0
product name sm t113
current bin samsung official
system status official
downloading do no turn off target
Any fast emergency help?
Any help?
I wait.
Cursed Chico said:
I wait.
Click to expand...
Click to collapse
Look up your stock rom on sammobile and download your regions rom. Flash the stock rom and try it again. I had this problem as well and i was able to resolve it by flashing stock and retrying.