Develop Bugs

[Q] Forcing usb debugging

So my screen is broken and i am trying to use [email protected] but i can't enable the usb debugging. Is there any way to enable it on the computer?
I don't want to flash a rom because i want to keep the data.

I have the same problem, screen on my wifes E4GT is broke but phone seems to work. When I connect via USB it shows the two devices but no drives show up. Tried kies and it says to enable debugging mode, which I thought I did but I don't remember.

[Q] After root computer doesn't recognize phone

My computer recognized my phone in debugging mode before I rooted it. Now it doesn't recognize the phone. Any ideas?

I don't need them, but i've heard that sometimes drivers need to be reinstalled..

[Q] Can't flash recovery, HOX cant connect to PC

Hi Guys,
I am trying to root my HOX, i was able to unlock the bootloader and everything went smoothly up until the point where i am trying to flash the recovery on my phone. The problem is that now the HOX device isnt detected on my pc and i cant access the sdcard. Everytime i plug USB in to pc it says "Unable to connect to PC".
1. What should i do now to complete the recovery flash?
2. What can i do to fix the USB connection issue?
Many Thanks!

Try this: Go to Settings, Developer options, USB debugging (Tick block to enable). Also it might be driver related try to reinstall HTC Sync

[Q] Can someone provide me a guide how to root my T3??

I think i'm not the only one who wants to root the T3. There are many guides which are very complicated for people who are no software developers...

http://forum.xda-developers.com/xperia-t3/general/root-firmware-18-1-1-21-t2889847
If this is too complicated then probably you shouldnt even consider rooting - procedure cant be any easier. There isnt also any other way to root T3 ATM.
And yes, this works also with .25 (4.4.4 KK). And for different ver. of T3 (5102 for example) use software for your model as base.

Ditarius said:
http://forum.xda-developers.com/xperia-t3/general/root-firmware-18-1-1-21-t2889847
If this is too complicated then probably you shouldnt even consider rooting - procedure cant be any easier. There isnt also any other way to root T3 ATM.
And yes, this works also with .25 (4.4.4 KK). And for different ver. of T3 (5102 for example) use software for your model as base.
Click to expand...
Click to collapse
I think I know what to do. Can i use the sony Emma thing as the flash tool?

what to do now
I've installed adb drivers fastboot drivers and successfully flashed the .14 kernel then switched on the phone and trying to root using Xperia rootkit is not detecting my device and stuck like this(as shown in the screen shot) what to so and PC companion is also not detecting my t3 (but while am on .32kernel it works fine)
I've flashed the .32kernel (cause am on 4.4.4) again and repeated everything but same problem,, redownloaded the kernels but same problem,,
Why rootkit is not detecting my phone ??? Plz help

need help
While m on .14 kernel rootkit or PC companion were not able to detecting my phone. On switched off state(.14kernel) flash tool displayes that the USB debugging is off and the phone is connected in mtp mode..
But before flashing .14 kernel(while am on .32kernel) I turned on USB debugging and set the USB connection mode to MSC mode (otherwise flashtool wouldn't flash kernel)... So why am facing this problem???...
After flashing .14 kernel I switched on the phone and wait at least 10 minutes then (the screen shots only Sony logo and goes black) after ten minutes when I connect the phone to the PC and lunch rootkit its not detecting showing waiting for device PC companion is also not detecting:crying:...... What to do now

avayrocks said:
While m on .14 kernel rootkit or PC companion were not able to detecting my phone. On switched off state(.14kernel) flash tool displayes that the USB debugging is off and the phone is connected in mtp mode..
But before flashing .14 kernel(while am on .32kernel) I turned on USB debugging and set the USB connection mode to MSC mode (otherwise flashtool wouldn't flash kernel)... So why am facing this problem...
After flashing .14 kernel I switched on the phone and wait at least 10 minutes then (the screen shots only Sony logo and goes black) after ten minutes when I connect the phone to the PC and lunch rootkit its not detecting showing waiting for device PC companion is also not detecting:crying:...... What to do now
Click to expand...
Click to collapse
Hi. Before you flash .14 you need to enable usb debugging in your phone, connect it to your pc via usb cable and check the "allow always..." checkbox in your phone:
P.D. If the popup is not showing when you plug your phone, then open a terminal (cmd in windows), launch adb devices command and you should see the popup in your device. If does not, unplug the phone, stop adb, plug the phone again and try launching adb command.

did it
pepinliria said:
Hi. Before you flash .14 you need to enable usb debugging in your phone, connect it to your pc via usb cable and check the "allow always..." checkbox in your phone:
P.D. If the popup is not showing when you plug your phone, then open a terminal (cmd in windows), launch adb devices command and you should see the popup in your device. If does not, unplug the phone, stop adb, plug the phone again and try launching adb command.
Click to expand...
Click to collapse
Rooted bro thnkx for help

ADB Debugging No Longer Connecting to PC

I'm stumped with this one. My HTC 10 no longer will connect to my computer at home or at work when I have USB debugging enabled. I don't get any entry in device manager. I'm running the 2.28.617.8 firmware w/ Viper 4.3.1. I utilize the universal adb driver. When debugging is enabled, the phone message says I'm connected to a slow charger. I have verified the ports on both computers are functional by attaching other devices. I have the connection settings for MTP enabled. I also tried revoking the debugging authorizations in the hope it would reset everything. The only way I can find around it, is to turn off usb debugging. Then, when I connect the phone it will mount properly and I can transfer files. This is ok for the short term, but is not ideal. Does anyone know what I might be missing?

I had this same issue after restoring a TWRP backup on a replacement 2.28.617.8 phone. RUU and restore all my settings mostly by hand fixed it.

Do you have HTC Sync installed? Try installing that, connect the phone and on the phone grant HTC Sync permission.